The City of Phoenix (COP) zoning boundaries were digitized from a hard copy data set, by contract, in 1991. Since that time, updates to the data have been made on an ongoing basis as land is rezoned. The layer is digitized at a relatively small scale, from approximately 1:10 to 1:10,000. Changes are made when inconsistencies are found.Contact Information: zoning@phoenix.gov

The interactive zoning map allows users to determine the zoning classification for any property in the District. Users can search zoning by specific address, square and lot, parcel, Zoning Commission (ZC) case, or Planned Unit Development (PUD), where applicable. Users can select different layers of data to display on the map, and can print reports for any selected property. Users should note that when searching for a PUD, the ZC case name and ZC case number reflect the most recent case name and case number associated with the PUD. If you have questions, comments, or suggestions regarding the zoning map, contact the Office of Zoning at (202) 727-6311 or dcoz@dc.gov.

City of Tempe Zoning and Overlay District map. Users may toggle between viewing all zones and individual overlay districts in the operational layers list. The Zoning and Development Code (ZDC) establishes land use classifications; creates zoning districts; establishes regulations, prohibitions and restrictions on land use and development; governs the use of land for residential and non-residential purposes; regulates the height and bulk of buildings and other structures; regulates lot occupancy and the size of yards and other open spaces; establishes standards of performance and design; adopts a map of the zoning districts; creates boards and commissions for land use and development decisions and defines the powers and duties of the boards and commissions; prescribes procedures for amendments to the General Plan, the ZDC, zoning map, use permits, development plan and land division approvals, variances and other permits; and prescribes penalties for violations of the ZDC.Zoning Code Information:City of Tempe Zoning and Development Code

Land located within the Eugene Urban Growth Area is zoned to provide areas suitable for certain types of development. Each zone provides a set of regulations governing the uses, building setbacks, height, and other development standards. Property may also be subject to an overlay zone. The overlay establishes additional regulations beyond the base zone to address specific community objectives, such as protection of environmentally sensitive areas or improving the efficient use of public transit. In some cases, overlays may provide an exception to the standard regulations for the base zone.Base Zones: Land located within the Eugene Urban Growth Boundary is zoned to provide areas suitable for certain types of development. Each base zone provides a set of regulations governing the uses, building setbacks, building height and other development features.Overlay Zones: Property may also be subject to one or more overlay zones. Overlay zones establish additional regulations beyond the base zone to address specific community objectives, such as protection of environmentally sensitive areas or improving the efficient use of public transit.Special Area Zones: A special area zone is a type of base zone that is applied to a specific area of the city that possesses distinctive buildings or natural features that have special significance for the community and requires special consideration or implementation of conservation and development measures that can not be achieved through application of the standard base zones.Special Area Zone Subareas: Some special area zones are further divided into subareas, such as commercial or single-family residential. These subareas establish regulations that govern the uses and development of these specific areas.Read more about the Zoning Map.

The non-urban land use zoning map of the 18 directly-administered cities and counties (cities) of New Taipei City and others

Zoning Districts City and County of San Francisco Planning Department. The Zoning Districts are the main component of the Zoning Map. The Zoning Map comprises: - Zoning Districts - Height and Bulk Districts - Special Use Districts - Preservation Districts - Coastal Zone Area - Special Sign Districts The official Zoning Map can be found in the San Francisco Planning Code: http://library.municode.com/index.aspx?clientId=14145&stateId=5&stateName=California (click on the links under ZONING MAPS on the left navigation column). Summaries of the Zoning District codes can be found here: http://www.sf-planning.org/index.aspx?page=1580 Section 105 of the Planning Code states: "The designations, locations and boundaries of the districts established by this Code shall be shown upon the "Zoning Map of the City and County of San Francisco," which shall consist of a series of numbered sectional maps. Wherever any uncertainty exists as to the boundary of any district as shown on said sectional maps, the following rules shall apply: (a) Where boundary lines are indicated as following streets and alleys within the right-of-way, they shall be construed as following the centerlines of such streets and alleys; (b) Where boundary lines are indicated as approximately following lot lines, such lot lines shall be construed to be such boundaries; (c) Where a boundary line divides a lot or crosses unsubdivided property; the location of such boundary shall be as indicated upon the Zoning Map using the scale appearing on such map; (d) Where further uncertainty exists, the City Planning Commission upon written application, or on its own motion, shall by resolution determine the location of a disputed boundary giving due consideration to the apparent indicated location thereof and the scale of the Zoning Map and the express purposes of this Code; (e) Wherever any property is not under these rules specifically included in any use district shown on the Zoning Map, such property is hereby declared to be in an RH-1(D) District, except that all property owned on the effective date of this amendment by the United States of America, State of California, City and County of San Francisco, or other governmental agency and within the City and County of San Francisco but not within the area covered by Sectional Maps Nos. 1 through 13 of the Zoning Map is hereby declared to be in a P (Public Use) District unless reclassified in accordance with the provisions of this Code; (f) Wherever any property is not under these rules specifically included in any height and bulk district shown on the Zoning Map, such property is hereby declared to be in a 40-X height and bulk district, except that all property owned on the effective date of this amendment by the United States of America, State of California, City and County of San Francisco, or other governmental agency and within the City and County of San Francisco but not within the area covered by Sectional Maps Nos. 1H through 13H of the Zoning Map is hereby declared to be in an OS (Open Space) District unless reclassified in accordance with the provisions of this Code, with the exception of Yerba Buena Island and Treasure Island which are hereby declared to be in a 40-X height and bulk district."Updated quarterly.

The broad purpose of the Zoning Code is to implement the General Plan, to promote and protect the public health, safety, comfort, and general welfare of the residents of the Town of Gilbert. Generally, the Zoning Code is intended to:A. Direct growth with priority to those areas where infrastructure and urban services can be economically provided; B. Ensure consistency and conformity among the General Plan, zoning districts, and zoning ordinances; C. Maintain and enhance the appearance and function of both new and existing development; D. Promote an efficient use of land resources; E. Ensure compatibility among land uses; F. Ensure the provision of adequate open space for light, air, and fire safety. G. Ensure that service demands of new development will not exceed the capacities of existing or planned streets, utilities, or public services; H. Conserve the natural environment, protect environmentally sensitive areas, and enhance the quality of the built environment; I. Promote energy and water conservation through project design; J. Establish consistent standards regulating the use and physical development of land; and K. Preserve and enhance property values.

Official Zoning Map Adoption. The Town is hereby divided into zones, or districts, as shown on the Official Zoning Map which, together with all explanatory matter thereon, is hereby adopted by reference and declared to be a part of the Zoning Code.District Boundary or Classification Changes. If, in accordance with the provisions of the Zoning Code, changes are made in district boundaries, district classifications, or other matter set forth on the Official Zoning Map, such changes shall be entered on the Official Zoning Map within 15 days following the effective date of the Ordinance adopting the change.Maintenance of Official Zoning Map. The Official Zoning Map shall be maintained in electronic format by the Technology Services department, as authorized by the Director of Planning.Copies of the Official Zoning Map. Paper copies of the Official Zoning Map shall be certified as true and correct by the director of the Technology Services department authorized by the Director of Planning. Electronic copies of the Official zoning map shall not be certified as true and correct.Where uncertainty exists regarding the boundary of a zoning district, the following rules shall apply:District boundaries shown as approximately following the property line of a lot or parcel shall be construed to follow such property line. Where a district boundary divides a lot or parcel, the location of the district boundary shall be determined by the Zoning Administrator using the scale appearing on the Official Zoning Map.District boundaries shown as approximately following right-of-way lines of freeways, streets, railroads, or other identifiable boundary lines shall be construed to follow such right-of-way or boundary lines.District boundaries shown as lying within right-of-way lines of freeways, streets, railroads, or other identifiable boundary lines shall be construed to follow the centerline of such right-of- way or boundary lines.District boundaries shown as lying at the edge of a canal or drainage channel shall be construed to follow the centerline of the canal or drainage channel.If any uncertainty remains as to the location of a district boundary or other feature shown on the Official Zoning Map, the location shall be determined by the Zoning Administrator.Record of Interpretation. The Zoning Administrator shall keep a record of interpretations made pursuant to this section. The record of interpretations shall be available to the public.

Do not use this data to make zoning determinations. This data does not show all zoning regulations for an address, including overlays and situations where an address has more than one zoning. Also, the data may be out of date. Use the interactive mapping application https://maps.austintexas.gov/GIS/PropertyProfile/ to make zoning determinations, and call 311 if you have questions about zoning. Zoning only applies to addresses within the City of Austin city limits. This dataset is a list of addresses with their zoning provided to answer questions such as "what property addresses have CS zoning." This data is derived from GIS layer for address and zoning. The place_id field is provided for linking to the addresses GIS layer. This product is produced by the City of Austin for informational purposes. No warranty is made they City of Austin regarding specific accuracy or completeness.

Land Use Zoning Districts in San Jose, CA.

Analysis of ‘Zoning Map - Zoning Districts’ provided by Analyst-2 (analyst-2.ai), based on source dataset retrieved from https://catalog.data.gov/dataset/28f51f62-ddc4-40c4-8e22-32de984f2745 on 13 February 2022.

--- Dataset description provided by original source is as follows ---

Zoning Districts City and County of San Francisco Planning Department. The Zoning Districts are the main component of the Zoning Map. The Zoning Map comprises: - Zoning Districts - Height and Bulk Districts - Special Use Districts - Preservation Districts - Coastal Zone Area - Special Sign Districts The official Zoning Map can be found in the San Francisco Planning Code: http://library.municode.com/index.aspx?clientId=14145&stateId=5&stateName=California (click on the links under ZONING MAPS on the left navigation column). Summaries of the Zoning District codes can be found here: http://www.sf-planning.org/index.aspx?page=1580 Section 105 of the Planning Code states: "The designations, locations and boundaries of the districts established by this Code shall be shown upon the "Zoning Map of the City and County of San Francisco," which shall consist of a series of numbered sectional maps. Wherever any uncertainty exists as to the boundary of any district as shown on said sectional maps, the following rules shall apply: (a) Where boundary lines are indicated as following streets and alleys within the right-of-way, they shall be construed as following the centerlines of such streets and alleys; (b) Where boundary lines are indicated as approximately following lot lines, such lot lines shall be construed to be such boundaries; (c) Where a boundary line divides a lot or crosses unsubdivided property; the location of such boundary shall be as indicated upon the Zoning Map using the scale appearing on such map; (d) Where further uncertainty exists, the City Planning Commission upon written application, or on its own motion, shall by resolution determine the location of a disputed boundary giving due consideration to the apparent indicated location thereof and the scale of the Zoning Map and the express purposes of this Code; (e) Wherever any property is not under these rules specifically included in any use district shown on the Zoning Map, such property is hereby declared to be in an RH-1(D) District, except that all property owned on the effective date of this amendment by the United States of America, State of California, City and County of San Francisco, or other governmental agency and within the City and County of San Francisco but not within the area covered by Sectional Maps Nos. 1 through 13 of the Zoning Map is hereby declared to be in a P (Public Use) District unless reclassified in accordance with the provisions of this Code; (f) Wherever any property is not under these rules specifically included in any height and bulk district shown on the Zoning Map, such property is hereby declared to be in a 40-X height and bulk district, except that all property owned on the effective date of this amendment by the United States of America, State of California, City and County of San Francisco, or other governmental agency and within the City and County of San Francisco but not within the area covered by Sectional Maps Nos. 1H through 13H of the Zoning Map is hereby declared to be in an OS (Open Space) District unless reclassified in accordance with the provisions of this Code, with the exception of Yerba Buena Island and Treasure Island which are hereby declared to be in a 40-X height and bulk district."Updated quarterly.

--- Original source retains full ownership of the source dataset ---

This data identifies current as well as proposed zoning and land use designations that are adopted by ordinances for unincorporated Pierce County. Zoning for cities is not included in this dataset. Zones are adopted by ordinances with specific technicalities for each community. Land Use designations offer a broad spectrum of allowable uses within a community. It is used to create a Comprehensive Plan Map or used for a Generalized Proposed Land Use Map or GPLUM. This dataset is also used to create the Land Use Designations theme, which covers proposed zoning use. The meaning of proposed is that the property might not be currently used for the purpose stated. It should be noted that Council adopted amendments to land use designations/zoning that will be effective at the beginning of 2006. Also, the Council is in the process of adopting the Mid-County Community Plan which amends land use designations/zoning as well. The Cities polygons found in the zoning data does not necessarily match the current cities boundaries. This is because the zoning data is updated once a year per the "Pierce County Comprehensive Plan" and does not allow for changes to be made during the year. The Comprehensive Plan is generally updated in November and generally becomes effective the following March. Use the "Cities in Pierce County" data set to determine current city boundaries. City boundaries can change more often than the current adopted Pierce County Zoning data. The zoning data contains the "Cities in Pierce County" boundaries at the time that the Pierce County Zoning was adopted. When determining the current zoning of a parcel near a city, the current "Cities in Pierce County" data set needs to be reviewed. Zoning codes for parcels within incorporated cities are determined by the city that the parcel is within. Please read metadata for additional information (https://matterhorn.piercecountywa.gov/GISmetadata/pdbplan_zoning.html). Any use or data download constitutes acceptance of the Terms of Use (https://matterhorn.piercecountywa.gov/disclaimer/PierceCountyGISDataTermsofUse.pdf).

The National Zoning Atlas is a collaborative project digitizing, demystifying, & democratizing ~30,000 U.S. zoning codes. It was founded by Cornell University professor Sara Bronin and has involved over 300 zoning and geospatial analysts. WHAT: Zoning laws, adopted by perhaps 30,000 local governments across the country, dictate much of what can be built in the United States. The National Zoning Atlas is helping us better understand these sometimes-opaque but incredibly influential laws by depicting their key attributes in an online, user-friendly map. As a federated academic enterprise, the National Zoning Atlas encompasses several disciplines. It is a legal research project, as it delves deeply into the regulatory frameworks that dictate so much of the way we use our land. It is a data science project, and it deploys novel systems of collecting, analyzing, and displaying geospatial and regulatory data. It is a digital humanities project, innovative in its methodology and having the potential to unlock new research on the central instrument that shapes our urban built environment, social relations and hierarchies, and geographies of opportunity. It is a social science project that will improve our understanding of our politics, society, and economy - and expand our collective ability to reimagine future, alternative, and reparative trajectories. And it is a computer science project, deploying machine learning and natural language processing to expand our understanding of how algorithms can read complex regulatory texts. WHY: Zoning laws have direct impacts on housing availability, transportation systems, the environment, economic opportunity, educational opportunity, and our food supply. Despite codes’ importance, ordinary people can’t make heads or tails of them. They are too complex and inscrutable. The National Zoning Atlas will help people better understand zoning, which would in turn broaden participation in land use decisions, identify opportunities for zoning reform, and narrow a wide information gap that currently favors land speculators, institutional investors, and homeowners over socioeconomically disadvantaged groups. It would also enable comparisons across jurisdictions, illuminate regional and statewide trends, and strengthen national planning for housing production, transportation infrastructure, and climate response. To understand the kinds of things a zoning atlas can show, review this research paper documenting the findings of the Connecticut Zoning Atlas (the first statewide atlas) and this research paper in HUD Cityscape describing the motivations of the project. HOW: To date, this project has relied on manual reviews of thousands of pages of zoning code texts and their corresponding maps. A how-to guide for these reviews is available for free download. The project is also using grant funding from the National Science Foundation and the U.S. Department of Housing and Community Development Community Block Grant Disaster Recovery Program to automate this process so we can more quickly map the 30,000 localities estimated to use zoning. Our basic operating principles are: Deploy data for the public good ​Evaluate and adapt methods and approaches ​Collaborate broadly ​Cultivate up-and-coming talent ​Assume that this is a solvable problem, worth solving ​WHO: Project participants overwhelmingly include representatives of academic institutions, nonprofits, and government agencies, with students providing important support. In addition, private partners may participate on specific geographic teams or provide data. Because this project aims to expand knowledge for the public good, its resulting online atlases will remain free to view regardless of who pitches in to create them.

Zoning in California, including Mariposa County, plays a crucial role in land use management and development regulation. Zoning ordinances categorize different areas of land into specific zones or districts, each with designated permitted uses, density regulations, building heights, and other development standards. In Mariposa County, zoning ensures orderly growth, protects natural resources, and preserves the county's unique character and rural landscape. By defining where residential, commercial, industrial, agricultural, and recreational activities can occur, zoning helps balance community needs, promote public safety, and maintain property values. It also provides a framework for local governments to implement long-term planning goals, such as promoting sustainable development, preserving open spaces, and supporting economic vitality. Zoning ordinances are crafted with input from community stakeholders and are periodically updated to reflect changing demographics, economic conditions, and environmental concerns, ensuring that Mariposa County continues to grow and evolve responsibly while preserving its quality of life and natural beauty.Click the link below to view the Mariposa County Code Title 17 Section about Zoning.https://mariposa.municipalcodeonline.com/book?type=ordinances#name=Title_17_Zoning

Thoughtful and effective planning enables a city to grow responsibly while providing the community with a variety of opportunities to live, work, and enjoy an environment. Good planning plays a vital role in shaping the future of Long Beach by providing the perfect balance of new development, community preservation, essential services, and economic growth. This map shows two key layers to planning: zoning and land use. It also includes historic districts and parking impacted areas. This map is used in the Zoning and General Plan web mapping application.Zoning Regulations divide the City into districts within which the location, height and bulk of buildings or structures and the uses of buildings, structures or land are regulated as specified. The municipal code defines zoning in Chapter 21.30. The Long Beach General Plan is a policy document that sets forth the goals, policies, and directions the City will take to achieve the vision of the community. The Land Use layer shown in this map is from the Land Use Element established in 1989.The Parking Impacted Area was developed through an extensive parking survey conducted with the help of a consultant to determine residential areas in which at least 75% of the on-street parking spaces were occupied at night.Historic districts are areas containing groups of older houses that are intact and unaltered. While each building may not be individually worthy of landmark status, collectively they preserve the visual qualities and ambiance of the past. Streetscape features, such as trees or light standards, may contribute to the historic value of the district.For more information, please see the Community Development Department website. Map updated 11/2019.

The city's land use zoning map....................

The Future Land Use Zones polygon feature is a vectorization of the 2018 Comprehensive Plan's zone map. While the GIS data currently represents the zones with definite boundaries, all the boundaries between zones should be considered 'fuzzy' and blended together.

Spatially-complete zoning map of North Carolina, USA. The results folder contains results of a machine learning (random forest) model predicting 3 core district zones (residential, non-residential, and mixed use) and 13 sub-district zones (open space, industrial, commercial, office, planned use, high-density residential, medium-high-density residential, medium-density residential, medium-low-density residential, low-density residential, agricultural residential, mixed use, and downtown). Results are provided as 30-m rasters (.tif) with each value corresponding to a zoning district. Table containing zone district ID (number) and zone district name (character string) is included in zone_classification.csv. Final (spatially complete statewide maps) can be found in the final_predicted folder. This folder includes Statewide core district results in NC_predicted_core.tif and statewide sub-district results in NC_predicted_sub.tif.

Zoning was generalized and reclassified into 3 core district zones and 13 sub-district zones (described above). Reclassified zoning data, collected from 39 counties in North Carolina is provided in the observed folder with core districts in core_district_observed_zones.tif and sub-districts in sub_district_observed_zones.tif. Also in this folder is zoning_implementation_NC.csv which includes links to the source data (zoning map and zoning ordinance) for all collected data.

Two models were created to predict zones under different data availability scenarios (i.e., scenarios that assume different levels of data availability). Predictions labeled “within_county” utilized the within-county model which predicts zoning districts in areas where zoning data is partially available for that county. To approximate scenarios of incomplete data accessibility, 20% of the data was randomly removed from training and reserved for independent performance assessments. Predictions labeled “between-county” utilized the between-county model which predicts zoning districts in areas where zoning data is inaccessible. To approximate this scenario, multiple between-county model iterations were computed by randomly removing entire counties from the training dataset and computing performance metrics on the removed (test) counties. Predictions are provided for both core districts and sub-districts (described above). Results from these models can be found in the predicted folder. This folder contains four subfolders: core_district_within_county, sub_district_within_county, core_district_between_county, and sub_district_between_county. Within each of these folders are predicted maps 30-m raster (.tif), performance reports including precision, recall, and f1 score overall and per district (.csv), and accuracy maps (3-km grid shapefile [.shp, .shx, .prj, .dbf]) with values corresponding to the proportion of misclassified pixels within a grid cell. Multiple randomized testing county samples were conducted for the between-county models. Each random sample is labeled r*_ where * is replaced with a number between 1 and 15.

To access parcel information:Enter an address or zoom in by using the +/- tools or your mouse scroll wheel. Parcels will draw when zoomed in.Click on a parcel to display a popup with information about that parcel.Click the "Basemap" button to display background aerial imagery.From the "Layers" button you can turn map features on and off.Complete Help (PDF)Parcel Legend:Full Map LegendAbout this ViewerThis viewer displays land property boundaries from assessor parcel maps across Massachusetts. Each parcel is linked to selected descriptive information from assessor databases. Data for all 351 cities and towns are the standardized "Level 3" tax parcels served by MassGIS. More details ...Read about and download parcel dataUpdatesV 1.1: Added 'Layers' tab. (2018)V 1.2: Reformatted popup to use HTML table for columns and made address larger. (Jan 2019)V 1.3: Added 'Download Parcel Data by City/Town' option to list of layers. This box is checked off by default but when activated a user can identify anywhere and download data for that entire city/town, except Boston. (March 14, 2019)V 1.4: Data for Boston is included in the "Level 3" standardized parcels layer. (August 10, 2020)V 1.4 MassGIS, EOTSS 2021