The Recreation and Conservation Office (RCO) was asked by the state Legislature to provide an inventory of lands in Washington owned by federal, state, and local governments, and by Native American tribes by July 1, 2014 (2013-15 Capital Budget proviso, Section 3174 of Engrossed Substitute Senate Bill 5035).The Public Lands Inventory focuses on natural resource and recreation lands and shows ownership (federal, by agency; state, by agency; local government, by county or city), ownership type (fee simple or assumed fee simple; aquatic, upland, or assumed upland), location, acreage, principal use (developed recreation, habitat and passive recreation, revenue generation, conservation, assumed habitat and passive recreation, other, or unknown), and the date and cost of recent acquisitions (within the past ten years).

The Parcel layer consists of parcels that are areas land in which the Department of Natural Resources holds some interest and are located anywhere in the upland area of the State of Washington. Three types of Parcels are currently held in the parcel layer. The number of Parcel types may increase in the future. Ownership Parcels, parcel type code 1, consist of Washington State owned land managed by the Department of Natural Resources. Most ownership parcels are held and managed for the benefit of some trust such as the Common School and Indemnity trust. Of the several parcel types, only Ownership Parcels represent the entire extent of the particular type of land managed by DNR. The other parcel types are incomplete data sets. Disposed Parcels, parcel type code 2, consist of ownership parcels that have been disposed of since July 1, 2007. A very few parcels disposed of prior to that date are also included. Easement Parcels, parcel type code 3, consist of various types of easements acquired for the State by the Department. Some of the Easements are negative easements over land not owned by the State, for example Conservation Easements which remove certain development rights away for the parcel owner. Other Easements are positive rights acquired by the State, such as roadway easements.WA DNR Managed Land Parcels Metadata

PLS Township. In the Public Land Survey System a Township refers to a unit of land, that is nominally six miles on a side, usually containing 36 sections, some of which are designed to correct for the convergence of meridians or range lines, with boundaries conforming to meridians and parallels within established limits.WA Public Land Survey Townships MetadataClick for downloadService URL: https://fortress.wa.gov/dnr/arcgisext/weba_ext_prod4/rest/services/Cadastre/WADNR_Cadastre_OpenData/MapServer/8

This data set depicts federal lands having restrictions on access or activities -- that is, lands mangaed by the National Park Service, Defense Department, or Energy Department -- in western North America. The data set was created by reformatting and merging state- and province-based ownership data layers originally acquired from diverse sources (including state GAP programs, USBLM state offices and other sources). For each original dataset 3 additional fields, "Pub_Pvt", "CA_OWN", and "SOURCE" were added and populated based on the specific ownership information contained in the source data. The original coverages were then merged based on the "CA_OWN" field. Finally, NPS, DOD, and DOE lands were selected out of the ownership layer. All work was completed in AcMap 8.3. This product and all source data are available online from SAGEMAP: http://sagemap.wr.usgs.gov.

The USGS Protected Areas Database of the United States (PAD-US) is the nation's inventory of protected areas, including public open space and voluntarily provided, private protected areas, identified as an A-16 National Geospatial Data Asset in the Cadastral Theme (http://www.fgdc.gov/ngda-reports/NGDA_Datasets.html). PAD-US is an ongoing project with several published versions of a spatial database of areas dedicated to the preservation of biological diversity, and other natural, recreational or cultural uses, managed for these purposes through legal or other effective means. The geodatabase maps and describes public open space and other protected areas. Most areas are public lands owned in fee; however, long-term easements, leases, and agreements or administrative designations documented in agency management plans may be included. The PAD-US database strives to be a complete “best available” inventory of protected areas (lands and waters) including data provided by managing agencies and organizations. The dataset is built in collaboration with several partners and data providers (http://gapanalysis.usgs.gov/padus/stewards/). See Supplemental Information Section of this metadata record for more information on partnerships and links to major partner organizations. As this dataset is a compilation of many data sets; data completeness, accuracy, and scale may vary. Federal and state data are generally complete, while local government and private protected area coverage is about 50% complete, and depends on data management capacity in the state. For completeness estimates by state: http://www.protectedlands.net/partners. As the federal and state data are reasonably complete; focus is shifting to completing the inventory of local gov and voluntarily provided, private protected areas. The PAD-US geodatabase contains over twenty-five attributes and four feature classes to support data management, queries, web mapping services and analyses: Marine Protected Areas (MPA), Fee, Easements and Combined. The data contained in the MPA Feature class are provided directly by the National Oceanic and Atmospheric Administration (NOAA) Marine Protected Areas Center (MPA, http://marineprotectedareas.noaa.gov ) tracking the National Marine Protected Areas System. The Easements feature class contains data provided directly from the National Conservation Easement Database (NCED, http://conservationeasement.us ) The MPA and Easement feature classes contain some attributes unique to the sole source databases tracking them (e.g. Easement Holder Name from NCED, Protection Level from NOAA MPA Inventory). The "Combined" feature class integrates all fee, easement and MPA features as the best available national inventory of protected areas in the standard PAD-US framework. In addition to geographic boundaries, PAD-US describes the protection mechanism category (e.g. fee, easement, designation, other), owner and managing agency, designation type, unit name, area, public access and state name in a suite of standardized fields. An informative set of references (i.e. Aggregator Source, GIS Source, GIS Source Date) and "local" or source data fields provide a transparent link between standardized PAD-US fields and information from authoritative data sources. The areas in PAD-US are also assigned conservation measures that assess management intent to permanently protect biological diversity: the nationally relevant "GAP Status Code" and global "IUCN Category" standard. A wealth of attributes facilitates a wide variety of data analyses and creates a context for data to be used at local, regional, state, national and international scales. More information about specific updates and changes to this PAD-US version can be found in the Data Quality Information section of this metadata record as well as on the PAD-US website, http://gapanalysis.usgs.gov/padus/data/history/.) Due to the completeness and complexity of these data, it is highly recommended to review the Supplemental Information Section of the metadata record as well as the Data Use Constraints, to better understand data partnerships as well as see tips and ideas of appropriate uses of the data and how to parse out the data that you are looking for. For more information regarding the PAD-US dataset please visit, http://gapanalysis.usgs.gov/padus/. To find more data resources as well as view example analysis performed using PAD-US data visit, http://gapanalysis.usgs.gov/padus/resources/. The PAD-US dataset and data standard are compiled and maintained by the USGS Gap Analysis Program, http://gapanalysis.usgs.gov/ . For more information about data standards and how the data are aggregated please review the “Standards and Methods Manual for PAD-US,” http://gapanalysis.usgs.gov/padus/data/standards/ .

For large areas, like Washington State, download as a file geodatabase. Large data sets like this one, for the State of Washington, may exceed the limits for downloading as shape files, excel files, or KML files. For areas less than a county, you may use the map to zoom to your area and download as shape file, excel or KML, if that format is desired.The Boundary layer consists of lines representing the boundaries of Parcels and Legal Descriptions. (See the metadata for those two layers.) Boundary lines are the places that are surveyed in order to delimit the extent of Parcels and Legal Descriptions. The character and accuracy of Boundary locations is held in the attributes of the Points that are at the ends of Boundary lines. All the boundaries of Parcels and Legal Descriptions are covered by a Boundary line. Currently the Boundary layer has little functionality. The only distinction it makes is between upland boundaries and shorelines. In the future Boundary lines will have a richer set of attributes in order to accommodate cartographic needs to distinguish between types of boundaries.WA Boundaries Metadata

The Point layer covers the State of Washington with a variety of different types of locations. The great majority of Points, point type 1, Corner Point, are located at the corners, or angle points, of Legal Description and Parcel areas. (See the metadata for Legal Description and Parcel.) Corner Points can represent differing types of locations such as surveyed monuments, locations calculated by survey, locations digitized from various maps like US Geological Survey quadrangles, and locations that serve no other purpose than to stabilize the endpoint of a Boundary or angle point of a Legal Description or Parcel. Points are the only features in the upland Cadastre that have attributes regarding the source and accuracy of the data. The known accuracy of the data varies dramatically from place to place. The attributes also indicate whether there is a known physical object to look for on the ground. The second type of Point, Geodetic Control Point, point type 2, is not currently populated. The third type of Point, Significant Coordinated Location, point type 3, can be used to store any type of point location that has cadastral significance. At present, the only Significant Coordinated Points in Cadastre are those points along the Washington Pacific Ocean coast which were used by the US Minerals Management Service to calculate the boundary of the State at one marine league from the coast.WA Public Land Survey Points MetadataClick to download

Click to downloadClick for metadataService URL: https://gis.dnr.wa.gov/site3/rest/services/Public_Boundaries/WADNR_PUBLIC_Cadastre_OpenData/FeatureServer/10Official Washington State boundary

Government Land Office maps (GLOs) are a result of the effort to survey all United States public lands before settlement. Starting in 1812 land was divided into square six mile blocks called townships, then subdivided into sections and ranges. Each subdivided area was surveyed and given its own map or GLO. During this process surveyors were required to indicate cultural resources such as roads and Indian trails and standardized symbols were used to represent geographic features. These GLOs are now maintained by the Bureau of Land Management as part of the official Land Status and Cadastral Survey records. As land was divided into parcels of individual ownership additional cadastral survey maps were created over time. For this reason there are often multiple GLOs or "cadastral survey maps" for one township / range, generally numbered one through four. For this seamless GLO layer, DAHP focused solely on the more historical GLOs which were usually listed as image number one or two for that specific township / range in the BLM Cadastral Survey records. In some cases no GLOs were available for review. Such areas included National Forest Lands, National Parks, Indian Reservations, and remote wilderness areas.

Washington Department of Natural Resources Local Unit. These areas are administrative subunits of a Washington Department of Natural Resources District.WA DNR Units Metadata

This dataset describes Tribal Lands in Washington State. Included are areas where the tribes ceded title to their historic areas of use to the U.S. Government through various treaties enacted during the later half of the 19th century. Boundary lines have been digitized from a variety of digital data sources including 1:100,000 streams for boundaries described in treaties as following a stream or river, 1:24k Water Resource Inventory Areas (WRIA), Watershed Administrative Unit (WAU) and Hydrologic Unit Code (HUC) boundaries for boundaries referred to in treaties as 'divide', 'summit' or 'between the waters of', 1:100,000 Major Public Lands (for current reservation areas), 10 meter DEM and 7.5 minute USGS digital Quad maps (to define ridgelines and 'divide' where WRIA, WAU or HUC boundaries don't exist) and NAIP orthophoto imagery (to get a feel for what a questionable boundary area actually looks like today). Ceded Land treaty areas are based on treaty language and US Government decrees dated 1854-1892. Natural geographic barriers such as streams and ridge lines were used where described or eluded to in treaty descriptions. Coordinate based latitude/longitude boundary lines were used in some Central Washington areas where described. References to general compass directions were followed using natural barriers such as watershed boundaries or drainages wherever possible. Some treaty boundary descriptions were found to be inadequate, inaccurate and in some cases misleading in nature in describing what should have been a natural boundary or even a coordinate based solution to a property description. Some of these boundary areas open to interpretation are discussed below in the Supplemental Information based on the language and definite boundaries of other treaty areas. Ceded areas in Oregon and Idaho from the Camp Stevens Treaties have been included in this dataset. The Washington State Department of Ecology makes no warranty for the accuracy of this material and is not libel for its use. Ecology will maintain this data layer for its own use and distribute to all interested parties. Updates, corrections and documentation should be submitted to the contact person. This data may or may not reflect the most current tribal reservation areas. Tribal reservations are updated regularly in the Major Public Lands (MPL) layer maintained by Washington State Department of Natural Resources. This GIS data is draft information and a work in progress and should be used only as a generalized visual guide to 150 year old treaties of limited content.

Mobile Map Packages (MMPK’s) can be used in the ESRI Field Maps app (no login required), either by direct download in the Field Maps app or by sideloading from your PC. They can also be used in desktop applications that support MMPK’s such as ArcGIS Pro, and ArcGIS Navigator. MMPK’s will expire quarterly and have a warning for the user at that time but will still function afterwards. They are updated quarterly to ensure you have the most up to date data possible. These mobile map packages include the following national datasets along with others: Surface Management Agency, Public Land Survey System (PLSS), BLM Recreation Sites, National Conservation Lands, ESRI’s Navigation Basemap and Vector Tile Package. Last updated 20250321. Contact jlzimmer@blm.gov with any questions.

For large areas, like Washington State, download as a file geodatabase. Large data sets like this one, for the State of Washington, may exceed the limits for downloading as shape files, excel files, or KML files. For areas less than a county, you may use the map to zoom to your area and download as shape file, excel or KML, if that format is desired.General DescriptionThis layer shows only Active Roads on DNR Lands in black. This does not include abandoned, orphaned, decommisioned, or closed roads on DNR lands. Roads not on DNR Lands are of unknown status are shown in grey. Roads not on DNR lands and of unknown status may not be drivable. IncludesThe ROAD feature class stores the spatial location and attributes of the State of Washington, Department of Natural Resources’ (DNR) forest roads and of other DNR, public and selected private roads in the state. Other elements of the transportation network such as ferries, railroads, and trails are not included. ContactWashington State Department of Natural Resources (WA DNR) Engineering DivisionAlexandra WashburnAlexandra.Washburn@dnr.wa.gov Updating EffortsUpdating and editing efforts are primarily focused on roads in DNR managed state lands, adjunct roads or in areas that are covered by a published map that is undergoing an update. The original road lines were entered primarily by digitizing from paper maps, scanning by machine, or derived stereoscopically from black and white photo imagery. They are currently updated and corrected as needed, in most cases using on-line, geo-referenced orthophotography, stereo color imagery, GPS or field survey.Roads on DNR Lands should be edited frequently by division staff.Roads outside of DNR Lands are probably edited much less frequently. The group in mapping that did this, does not do it anymore.AttributesThe ROAD layer includes basic attributes that are linked to the intersection-based road segments. These attributes store information about route id, road name, road number, control, responsibility, status, access, surface, classification, and abandonment.PurposeThis layer is used to help in road infrastructure planning and maintenance, Forest Practices and Road Maintenance and Abandonment Planning (RMAP) compliance reporting, forest management, timber sales planning, and is the basis for the ROAD_ROUTE_FT layer and associated event tables that currently record these maintenance activities and road easements. It is widely used as a layer in cartographic presentations and published maps.

The Public Lands Inventory focuses on natural resource and recreation lands and shows ownership (federal, by agency; state, by agency; local government, by county or city), ownership type (fee simple or assumed fee simple; aquatic, upland, or assumed upland), location, acreage, principal use (developed recreation, habitat and passive recreation, revenue generation, conservation, assumed habitat and passive recreation, other, or unknown), and the date and cost of recent acquisitions (within the past ten years).

The WA RCO Funded Land Acquisitions layer supports the Public Lands Inventory required by:

The 2013-15 Capital Budget, Chapter 19, Laws of 2013, Section 3174, (ESSB 5035) has tasked the Recreation and Conservation Office (RCO) to provide a centralized inventory of lands in Washington owned by federal, state and local governments, and by Native American tribes. This work is to be undertaken in collaboration with the Joint Legislative Audit and Review Committee (JLARC).

The proviso stipulates that the inventory must: • Be in a web-accessible format, including a Geographic Information System (GIS)-based interactive map that allows users to find out information about specific aspects of land ownership. The data must be standardized to allow summary information to be accessible. • Include the following information: o Ownership (federal; state, by state agency; local government; and tribal); o Ownership type (fee simple or easements); o Location; o Acreage; o Principal use of these lands (intended use at the time of acquisition and current use) including, but not limited to, developed recreation land, habitat and passive recreation land, and revenue-generation uses; and o Acquisition costs if acquired by state agencies over the last ten years, including acquisition funding sources.

In addition, RCO shall develop recommendations for standardization of acquisition and disposal recordkeeping on a biennial basis, including identifying a preferred process for centralizing acquisition data.

Key dates are January 1, 2014, when a status report on the inventory to the appropriate committees of the Legislature is due, and July 1, 2014, when the project must be complete and a final report is due.

The inventory is a key component for a three-part review of public lands that the Legislature tasked to JLARC in capital budget proviso 1001. The JLARC review is due December 1, 2014.

This EnviroAtlas dataset describes the breakdown of the land cover classes with each Census Block Group. In this commmunity, forest is defined as Trees & Forest, and Woody Wetlands. Green space is defined as Trees & Forest, Grass & Herbaceous, Agriculture, Woody Wetlands, and Emergent Wetlands. Agriculture is defined as Agriculture alone.Wetlands are defined as Woody Wetlands and Emergent Wetlands. This dataset also includes the area per capita for each block group for some land cover types. This dataset was produced by the US EPA to support research and online mapping activities related to EnviroAtlas. EnviroAtlas (https://www.epa.gov/enviroatlas) allows the user to interact with a web-based, easy-to-use, mapping application to view and analyze multiple ecosystem services for the contiguous United States. The dataset is available as downloadable data (https://edg.epa.gov/data/Public/ORD/EnviroAtlas) or as an EnviroAtlas map service. Additional descriptive information about each attribute in this dataset can be found in its associated EnviroAtlas Fact Sheet (https://www.epa.gov/enviroatlas/enviroatlas-fact-sheets).

Planned Land Use from the 2021 Comprehensive Plan Amendment Act of 2021. This data set is an update to the 2006 original version, which was digitized from the Generalized Land Use Map of the District of Columbia Comprehensive Plan. It shows which areas of the city are planned for various uses. These uses include residential and commercial uses at various densities, public land, institutional, federal, and industrial uses. Although planned uses and current uses may be similar, this is not a data set describing current land use. This is a generalized product, and cannot be used to identity specific uses for all specific locations in the District of Columbia.

This EnviroAtlas dataset describes the breakdown of the land cover classes with each Census Block Group. In this commmunity, forest is defined as Trees & Forest, and Woody Wetlands. Green space is defined as Trees & Forest, Grass & Herbaceous, Agriculture, Woody Wetlands, and Emergent Wetlands. Agriculture is defined as Agriculture alone.Wetlands are defined as Woody Wetlands and Emergent Wetlands. This dataset also includes the area per capita for each block group for some land cover types. This dataset was produced by the US EPA to support research and online mapping activities related to EnviroAtlas. EnviroAtlas (https://www.epa.gov/enviroatlas) allows the user to interact with a web-based, easy-to-use, mapping application to view and analyze multiple ecosystem services for the contiguous United States. The dataset is available as downloadable data (https://edg.epa.gov/data/Public/ORD/EnviroAtlas) or as an EnviroAtlas map service. Additional descriptive information about each attribute in this dataset can be found in its associated EnviroAtlas Fact Sheet (https://www.epa.gov/enviroatlas/enviroatlas-fact-sheets).

Planned Land Use from the 2021 Comprehensive Plan Amendment Act of 2021. This data set is an update to the 2006 original version, which was digitized from the Generalized Land Use Map of the District of Columbia Comprehensive Plan. It shows which areas of the city are planned for various uses. These uses include residential and commercial uses at various densities, public land, institutional, federal, and industrial uses. Although planned uses and current uses may be similar, this is not a data set describing current land use. This is a generalized product, and cannot be used to identity specific uses for all specific locations in the District of Columbia.

Planned Land Use from the 2021 Comprehensive Plan Amendment Act of 2021. This data set is an update to the 2006 original version, which was digitized from the Generalized Land Use Map of the District of Columbia Comprehensive Plan. It shows which areas of the city are planned for various uses. These uses include residential and commercial uses at various densities, public land, institutional, federal, and industrial uses. Although planned uses and current uses may be similar, this is not a data set describing current land use. This is a generalized product, and cannot be used to identity specific uses for all specific locations in the District of Columbia.