INSPIRE Priority Data Set (Compliant) - Species range

This dataset has been generated using NYUSIM 3.0 mm-Wave channel simulator software, which takes into account atmospheric data such as rain rate, humidity, barometric pressure, and temperature. The input data was collected over the course of a year in South Asia. As a result, the dataset provides an accurate representation of the seasonal variations in mm-wave channel characteristics in these areas. The dataset includes a total of 2835 records, each of which contains T-R Separation Distance (m), Time Delay (ns), Received Power (dBm), Phase (rad), Azimuth AoD (degree), Elevation AoD (degree), Azimuth AoA (degree), Elevation, AoA (degree), RMS Delay Spread (ns), Season, Frequency and Path Loss (dB). Four main seasons have been considered in this dataset: Spring, Summer, Fall, and Winter. Each season is subdivided into three parts (i.e., low, medium, and high), to accurately include the atmospheric variations in a season. To simulate the path loss, realistic Tx and Rx height, NLoS environment, and mean human blockage attenuation effects have been taken into consideration. The data has been preprocessed and normalized to ensure consistency and ease of use. Researchers in the field of mm-wave communications and networking can use this dataset to study the impact of atmospheric conditions on mm-wave channel characteristics and develop more accurate models for predicting channel behavior. The dataset can also be used to evaluate the performance of different communication protocols and signal processing techniques under varying weather conditions. Note that while the data was collected specifically in South Asia region, the high correlation between the weather patterns in this region and other areas means that the dataset may also be applicable to other regions with similar atmospheric conditions.

Acknowledgements The paper in which the dataset was proposed is available on: https://ieeexplore.ieee.org/abstract/document/10307972

Citation

If you use this dataset, please cite the following paper:

Rashed Hasan Ratul, S. M. Mehedi Zaman, Hasib Arman Chowdhury, Md. Zayed Hassan Sagor, Mohammad Tawhid Kawser, and Mirza Muntasir Nishat, “Atmospheric Influence on the Path Loss at High Frequencies for Deployment of 5G Cellular Communication Networks,” 2023 14th International Conference on Computing Communication and Networking Technologies (ICCCNT), 2023, pp. 1–6. https://doi.org/10.1109/ICCCNT56998.2023.10307972

BibTeX ```bibtex @inproceedings{Ratul2023Atmospheric, author = {Ratul, Rashed Hasan and Zaman, S. M. Mehedi and Chowdhury, Hasib Arman and Sagor, Md. Zayed Hassan and Kawser, Mohammad Tawhid and Nishat, Mirza Muntasir}, title = {Atmospheric Influence on the Path Loss at High Frequencies for Deployment of {5G} Cellular Communication Networks}, booktitle = {2023 14th International Conference on Computing Communication and Networking Technologies (ICCCNT)}, year = {2023}, pages = {1--6}, doi = {10.1109/ICCCNT56998.2023.10307972}, keywords = {Wireless communication; Fluctuations; Rain; 5G mobile communication; Atmospheric modeling; Simulation; Predictive models; 5G-NR; mm-wave propagation; path loss; atmospheric influence; NYUSIM; ML} }

Vector datasets of CWHR range maps are one component of California Wildlife Habitat Relationships (CWHR), a comprehensive information system and predictive model for Californias wildlife. The CWHR System was developed to support habitat conservation and management, land use planning, impact assessment, education, and research involving terrestrial vertebrates in California. CWHR contains information on life history, management status, geographic distribution, and habitat relationships for wildlife species known to occur regularly in California. Range maps represent the maximum, current geographic extent of each species within California. They were originally delineated at a scale of 1:5,000,000 by species-level experts and have gradually been revised at a scale of 1:1,000,000. For more information about CWHR, visit the CWHR webpage (https://www.wildlife.ca.gov/Data/CWHR). The webpage provides links to download CWHR data and user documents such as a look up table of available range maps including species code, species name, and range map revision history; a full set of CWHR GIS data; .pdf files of each range map or species life history accounts; and a User Guide.

The World Inventory of Soil Emission Potentials (WISE) database currently contains data for over 4300 soil profiles collected mostly between 1950 and 1995. This database has been used to generate a series of uniform data sets of derived soil properties for each of the 106 soil units considered in the Soil Map of the World (FAO-UNESCO, 1974). These data sets were then linked to a 1/2 degree longitude by 1/2 degree latitude version of the edited and digital Soil Map of the World (FAO, 1995) to generate GIS raster image files for the following variables: Total available water capacity (mm water per 1 m soil depth) soil organic carbon density (kg C/m2 for 0-30cm depth range) soil organic carbon density (kg C/m2 for 0-100cm depth range) soil carbonate carbon density (kg C/m**2 for 0-100cm depth range) soil pH (0-30 cm depth range) soil pH (30-100 cm depth range) Data Citation: The data set should be cited as follows: Batjes, N. H. (ed). 2000. Global Data Set of Derived Soil Properties, 0.5-Degree Grid (ISRIC-WISE). Available on-line from Oak Ridge National Laboratory Distributed Active Archive Center, Oak Ridge, Tennessee, U.S.A.

This repo contains the npz files of the database that is required by the RANGE model. This dataset is associated with the paper RANGE: Retrieval Augmented Neural Fields for Multi-Resolution Geo-Embeddings (CVPR 2025). Code: https://github.com/mvrl/RANGE

Vector datasets of CWHR range maps are one component of California Wildlife Habitat Relationships (CWHR), a comprehensive information system and predictive model for Californias wildlife. The CWHR System was developed to support habitat conservation and management, land use planning, impact assessment, education, and research involving terrestrial vertebrates in California. CWHR contains information on life history, management status, geographic distribution, and habitat relationships for wildlife species known to occur regularly in California. Range maps represent the maximum, current geographic extent of each species within California. They were originally delineated at a scale of 1:5,000,000 by species-level experts and have gradually been revised at a scale of 1:1,000,000. For more information about CWHR, visit the CWHR webpage (https://www.wildlife.ca.gov/Data/CWHR). The webpage provides links to download CWHR data and user documents such as a look up table of available range maps including species code, species name, and range map revision history; a full set of CWHR GIS data; .pdf files of each range map or species life history accounts; and a User Guide.

GAP species range data are coarse representations of the total areal extent a species occupies, in other words the geographic limits within which a species can be found (Morrison and Hall 2002). These data provide the geographic extent within which the USGS Gap Analysis Project delineates areas of suitable habitat for terrestrial vertebrate species in their species habitat maps. The range maps are created by attributing a vector file derived from the 12-digit Hydrologic Unit Dataset (USDA NRCS 2009). Modifications to that dataset are described here < https://www.sciencebase.gov/catalog/item/56d496eee4b015c306f17a42>. Attribution of the season range for each species was based on the literature and online sources (See Cross Reference section of the metadata). Attribution for each hydrologic unit within the range included values for origin (native, introduced, reintroduced, vagrant), occurrence (extant, possibly present, potentially present, extirpated), reproductive use (breeding, non-breeding, both) and season (year-round, summer, winter, migratory, vagrant). These species range data provide the biological context within which to build our species distribution models. Versioning, Naming Conventions and Codes: A composite version code is employed to allow the user to track the spatial extent, the date of the ground conditions, and the iteration of the data set for that extent/date. For example, CONUS_2001v1 represents the spatial extent of the conterminous US (CONUS), the ground condition year of 2001, and the first iteration (v1) for that extent/date. In many cases, a GAP species code is used in conjunction with the version code to identify specific data sets or files (i.e. Cooper’s Hawk Habitat Map named bCOHAx_CONUS_2001v1_HabMap).

UNSW-NB15 Dataset

The UNSW-NB15 dataset is a modern and comprehensive benchmark dataset for network intrusion detection research.
It was created by the Cyber Range Lab at the Australian Centre for Cyber Security (ACCS) in 2015 to address the limitations of older datasets (such as KDD99 and NSL-KDD) by providing realistic traffic patterns, contemporary attack types, and a balanced representation of normal and malicious activities.

Key Characteristics

• Realistic Traffic Generation: Traffic was generated using the IXIA PerfectStorm tool, simulating both legitimate and malicious network behavior in a controlled environment.
• Diverse Attack Scenarios:
  • Fuzzers
  • Analysis
  • Backdoors
  • DoS (Denial-of-Service)
  • Exploits
  • Generic attacks
  • Reconnaissance
  • Shellcode
  • Worms
• Data Capture: Raw network traffic was captured in PCAP format.
• Feature Extraction: Features were generated using Argus and Bro-IDS tools, resulting in 49 attributes, including:
  • Flow-based: Duration, source/destination bytes, packet counts
  • Content-based: Payload characteristics, HTTP methods
  • Time-based: Flow inter-arrival times, active and idle periods
  • Additional generated features: Statistical measures for deeper analysis
• Labeling: Each record is labeled as either benign or belonging to one of the nine attack categories.
• Data Volume: Contains 2,540,044 records, split into training and testing sets.

Advantages

• Represents modern cyber threats absent in older datasets.
• Includes multiple attack categories for fine-grained classification.
• Suitable for binary classification (normal vs. attack) and multi-class classification (attack type identification).
• Balanced design for realistic intrusion detection system (IDS) evaluation.

Usage

The UNSW-NB15 dataset is widely used as a benchmark in intrusion detection and cybersecurity research due to its: - Comprehensive attack coverage - Rich set of network flow features - Realistic traffic patterns for both training and testing models

Vector datasets of CWHR range maps are one component of California Wildlife Habitat Relationships (CWHR), a comprehensive information system and predictive model for Californias wildlife. The CWHR System was developed to support habitat conservation and management, land use planning, impact assessment, education, and research involving terrestrial vertebrates in California. CWHR contains information on life history, management status, geographic distribution, and habitat relationships for wildlife species known to occur regularly in California. Range maps represent the maximum, current geographic extent of each species within California. They were originally delineated at a scale of 1:5,000,000 by species-level experts and have gradually been revised at a scale of 1:1,000,000. For more information about CWHR, visit the CWHR webpage (https://www.wildlife.ca.gov/Data/CWHR). The webpage provides links to download CWHR data and user documents such as a look up table of available range maps including species code, species name, and range map revision history; a full set of CWHR GIS data; .pdf files of each range map or species life history accounts; and a User Guide.

The “Fused Image dataset for convolutional neural Network-based crack Detection” (FIND) is a large-scale image dataset with pixel-level ground truth crack data for deep learning-based crack segmentation analysis. It features four types of image data including raw intensity image, raw range (i.e., elevation) image, filtered range image, and fused raw image. The FIND dataset consists of 2500 image patches (dimension: 256x256 pixels) and their ground truth crack maps for each of the four data types.

The images contained in this dataset were collected from multiple bridge decks and roadways under real-world conditions. A laser scanning device was adopted for data acquisition such that the captured raw intensity and raw range images have pixel-to-pixel location correspondence (i.e., spatial co-registration feature). The filtered range data were generated by applying frequency domain filtering to eliminate image disturbances (e.g., surface variations, and grooved patterns) from the raw range data [1]. The fused image data were obtained by combining the raw range and raw intensity data to achieve cross-domain feature correlation [2,3]. Please refer to [4] for a comprehensive benchmark study performed using the FIND dataset to investigate the impact from different types of image data on deep convolutional neural network (DCNN) performance.

If you share or use this dataset, please cite [4] and [5] in any relevant documentation.

In addition, an image dataset for crack classification has also been published at [6].

References:

[1] Shanglian Zhou, & Wei Song. (2020). Robust Image-Based Surface Crack Detection Using Range Data. Journal of Computing in Civil Engineering, 34(2), 04019054. https://doi.org/10.1061/(asce)cp.1943-5487.0000873

[2] Shanglian Zhou, & Wei Song. (2021). Crack segmentation through deep convolutional neural networks and heterogeneous image fusion. Automation in Construction, 125. https://doi.org/10.1016/j.autcon.2021.103605

[3] Shanglian Zhou, & Wei Song. (2020). Deep learning–based roadway crack classification with heterogeneous image data fusion. Structural Health Monitoring, 20(3), 1274-1293. https://doi.org/10.1177/1475921720948434

[4] Shanglian Zhou, Carlos Canchila, & Wei Song. (2023). Deep learning-based crack segmentation for civil infrastructure: data types, architectures, and benchmarked performance. Automation in Construction, 146. https://doi.org/10.1016/j.autcon.2022.104678

[5] (This dataset) Shanglian Zhou, Carlos Canchila, & Wei Song. (2022). Fused Image dataset for convolutional neural Network-based crack Detection (FIND) [Data set]. Zenodo. https://doi.org/10.5281/zenodo.6383044

[6] Wei Song, & Shanglian Zhou. (2020). Laser-scanned roadway range image dataset (LRRD). Laser-scanned Range Image Dataset from Asphalt and Concrete Roadways for DCNN-based Crack Classification, DesignSafe-CI. https://doi.org/10.17603/ds2-bzv3-nc78

About this dataset

Context

The dataset tabulates the population of Grass Range by gender across 18 age groups. It lists the male and female population in each age group along with the gender ratio for Grass Range. The dataset can be utilized to understand the population distribution of Grass Range by gender and age. For example, using this dataset, we can identify the largest age group for both Men and Women in Grass Range. Additionally, it can be used to see how the gender ratio changes from birth to senior most age group and male to female ratio across each age group for Grass Range.

Key observations

Largest age group (population): Male # 35-39 years (7) | Female # 70-74 years (36). Source: U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates.

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Scope of gender :

Please note that American Community Survey asks a question about the respondents current sex, but not about gender, sexual orientation, or sex at birth. The question is intended to capture data for biological sex, not gender. Respondents are supposed to respond with the answer as either of Male or Female. Our research and this dataset mirrors the data reported as Male and Female for gender distribution analysis.

Variables / Data Columns

• Age Group: This column displays the age group for the Grass Range population analysis. Total expected values are 18 and are define above in the age groups section.
• Population (Male): The male population in the Grass Range is shown in the following column.
• Population (Female): The female population in the Grass Range is shown in the following column.
• Gender Ratio: Also known as the sex ratio, this column displays the number of males per 100 females in Grass Range for each age group.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Grass Range Population by Gender. You can refer the same here

General

For more details and the most up-to-date information please consult our project page: https://kainmueller-lab.github.io/fisbe.

Summary

A new dataset for neuron instance segmentation in 3d multicolor light microscopy data of fruit fly brains

30 completely labeled (segmented) images

71 partly labeled images

altogether comprising ∼600 expert-labeled neuron instances (labeling a single neuron takes between 30-60 min on average, yet a difficult one can take up to 4 hours)

To the best of our knowledge, the first real-world benchmark dataset for instance segmentation of long thin filamentous objects

A set of metrics and a novel ranking score for respective meaningful method benchmarking

An evaluation of three baseline methods in terms of the above metrics and score

Abstract

Instance segmentation of neurons in volumetric light microscopy images of nervous systems enables groundbreaking research in neuroscience by facilitating joint functional and morphological analyses of neural circuits at cellular resolution. Yet said multi-neuron light microscopy data exhibits extremely challenging properties for the task of instance segmentation: Individual neurons have long-ranging, thin filamentous and widely branching morphologies, multiple neurons are tightly inter-weaved, and partial volume effects, uneven illumination and noise inherent to light microscopy severely impede local disentangling as well as long-range tracing of individual neurons. These properties reflect a current key challenge in machine learning research, namely to effectively capture long-range dependencies in the data. While respective methodological research is buzzing, to date methods are typically benchmarked on synthetic datasets. To address this gap, we release the FlyLight Instance Segmentation Benchmark (FISBe) dataset, the first publicly available multi-neuron light microscopy dataset with pixel-wise annotations. In addition, we define a set of instance segmentation metrics for benchmarking that we designed to be meaningful with regard to downstream analyses. Lastly, we provide three baselines to kick off a competition that we envision to both advance the field of machine learning regarding methodology for capturing long-range data dependencies, and facilitate scientific discovery in basic neuroscience.

Dataset documentation:

We provide a detailed documentation of our dataset, following the Datasheet for Datasets questionnaire:

FISBe Datasheet

Our dataset originates from the FlyLight project, where the authors released a large image collection of nervous systems of ~74,000 flies, available for download under CC BY 4.0 license.

Files

fisbe_v1.0_{completely,partly}.zip

contains the image and ground truth segmentation data; there is one zarr file per sample, see below for more information on how to access zarr files.

fisbe_v1.0_mips.zip

maximum intensity projections of all samples, for convenience.

sample_list_per_split.txt

a simple list of all samples and the subset they are in, for convenience.

view_data.py

a simple python script to visualize samples, see below for more information on how to use it.

dim_neurons_val_and_test_sets.json

a list of instance ids per sample that are considered to be of low intensity/dim; can be used for extended evaluation.

Readme.md

general information

How to work with the image files

Each sample consists of a single 3d MCFO image of neurons of the fruit fly.For each image, we provide a pixel-wise instance segmentation for all separable neurons.Each sample is stored as a separate zarr file (zarr is a file storage format for chunked, compressed, N-dimensional arrays based on an open-source specification.").The image data ("raw") and the segmentation ("gt_instances") are stored as two arrays within a single zarr file.The segmentation mask for each neuron is stored in a separate channel.The order of dimensions is CZYX.

We recommend to work in a virtual environment, e.g., by using conda:

conda create -y -n flylight-env -c conda-forge python=3.9conda activate flylight-env

How to open zarr files

Install the python zarr package:

pip install zarr

Opened a zarr file with:

import zarrraw = zarr.open(, mode='r', path="volumes/raw")seg = zarr.open(, mode='r', path="volumes/gt_instances")

optional:import numpy as npraw_np = np.array(raw)

Zarr arrays are read lazily on-demand.Many functions that expect numpy arrays also work with zarr arrays.Optionally, the arrays can also explicitly be converted to numpy arrays.

How to view zarr image files

We recommend to use napari to view the image data.

Install napari:

pip install "napari[all]"

Save the following Python script:

import zarr, sys, napari

raw = zarr.load(sys.argv[1], mode='r', path="volumes/raw")gts = zarr.load(sys.argv[1], mode='r', path="volumes/gt_instances")

viewer = napari.Viewer(ndisplay=3)for idx, gt in enumerate(gts): viewer.add_labels( gt, rendering='translucent', blending='additive', name=f'gt_{idx}')viewer.add_image(raw[0], colormap="red", name='raw_r', blending='additive')viewer.add_image(raw[1], colormap="green", name='raw_g', blending='additive')viewer.add_image(raw[2], colormap="blue", name='raw_b', blending='additive')napari.run()

Execute:

python view_data.py /R9F03-20181030_62_B5.zarr

Metrics

S: Average of avF1 and C

avF1: Average F1 Score

C: Average ground truth coverage

clDice_TP: Average true positives clDice

FS: Number of false splits

FM: Number of false merges

tp: Relative number of true positives

For more information on our selected metrics and formal definitions please see our paper.

Baseline

To showcase the FISBe dataset together with our selection of metrics, we provide evaluation results for three baseline methods, namely PatchPerPix (ppp), Flood Filling Networks (FFN) and a non-learnt application-specific color clustering from Duan et al..For detailed information on the methods and the quantitative results please see our paper.

License

The FlyLight Instance Segmentation Benchmark (FISBe) dataset is licensed under the Creative Commons Attribution 4.0 International (CC BY 4.0) license.

Citation

If you use FISBe in your research, please use the following BibTeX entry:

@misc{mais2024fisbe, title = {FISBe: A real-world benchmark dataset for instance segmentation of long-range thin filamentous structures}, author = {Lisa Mais and Peter Hirsch and Claire Managan and Ramya Kandarpa and Josef Lorenz Rumberger and Annika Reinke and Lena Maier-Hein and Gudrun Ihrke and Dagmar Kainmueller}, year = 2024, eprint = {2404.00130}, archivePrefix ={arXiv}, primaryClass = {cs.CV} }

Acknowledgments

We thank Aljoscha Nern for providing unpublished MCFO images as well as Geoffrey W. Meissner and the entire FlyLight Project Team for valuablediscussions.P.H., L.M. and D.K. were supported by the HHMI Janelia Visiting Scientist Program.This work was co-funded by Helmholtz Imaging.

Changelog

There have been no changes to the dataset so far.All future change will be listed on the changelog page.

Contributing

If you would like to contribute, have encountered any issues or have any suggestions, please open an issue for the FISBe dataset in the accompanying github repository.

All contributions are welcome!

According to INSPIRE transformed development plan “Amendment 09-02, area Adlerstr.12-30” of the city of Aalen based on an XPlanung dataset in version 5.0.

Movie dataset This is short-range dataset based on movie information, basically having 20 rows in the data set

WiFi CSI-Based Long-Range Through-Wall Human Activity Recognition with the ESP32

This repository contains the WiFi CSI human presence detection and activity recognition datasets proposed in [1].

Datasets

• DP_LOS - Line-of-sight (LOS) presence detection dataset, comprised of 392 CSI amplitude spectrograms.
• DP_NLOS - Non-line-of-sight (NLOS) presence detection dataset, comprised of 384 CSI amplitude spectrograms.
• DA_LOS - LOS activity recognition dataset, comprised of 392 CSI amplitude spectrograms.
• DA_NLOS - NLOS activity recognition dataset, comprised of 384 CSI amplitude spectrograms.

Table 1: Characteristics of presence detection and activity recognition datasets.

Data Format

Each dataset employs an 8:1:1 training-validation-test split, defined in the provided label files trainLabels.csv, validationLabels.csv, and testLabels.csv. Label files use the sample format [i c], with i corresponding to the spectrogram index (i.png) and c corresponding to the class. For presence detection datasets (DP_LOS , DP_NLOS), c in {0 = "no presence", 1 = "presence in room 1", ..., 5 = "presence in room 5"}. For activity recognition datasets (DA_LOS , DA_NLOS), c in {0="no activity", 1="walking", and 2="walking + arm-waving"}. Furthermore, the mean and standard deviation of a given dataset are provided in meanStd.csv.

Download and Use
This data may be used for non-commercial research purposes only. If you publish material based on this data, we request that you include a reference to our paper [1].

[1] Strohmayer, Julian, and Martin Kampel. "WiFi CSI-Based Long-Range Through-Wall Human Activity Recognition with the ESP32" International Conference on Computer Vision Systems. Cham: Springer Nature Switzerland, 2023.

BibTeX citation:

@inproceedings{strohmayer2023wifi,
 title={WiFi CSI-Based Long-Range Through-Wall Human Activity Recognition with the ESP32},
 author={Strohmayer, Julian and Kampel, Martin},
 booktitle={International Conference on Computer Vision Systems},
 pages={41--50},
 year={2023},
 organization={Springer}
}

The project lead for the collection of this data was Carrington Hilson. Elk (4 adult females) were captured and equipped with GPS collars (Lotek Iridium) transmitting data from 2017-2021. The Rowdy herd does not migrate between traditional summer and winter seasonal ranges. Therefore, annual home ranges were modeled using year-round data to demarcate high use areas in lieu of modeling the specific winter ranges commonly seen in other ungulate analyses in California. GPS locations were fixed between 1-6 hour intervals in the dataset. To improve the quality of the data set as per Bjørneraas et al. (2010), the GPS data were filtered prior to analysis to remove locations which were: i) further from either the previous point or subsequent point than an individual pronghorn is able to travel in the elapsed time, ii) forming spikes in the movement trajectory based on outgoing and incoming speeds and turning angles sharper than a predefined threshold , or iii) fixed in 2D space and visually assessed as a bad fix by the analyst. The methodology used for this migration analysis allowed for the mapping of the herd’s home range. Brownian bridge movement models (BBMMs; Sawyer et al. 2009) were constructed with GPS collar data from 4 elk, including 7 annual home range sequences, location, date, time, and average location error as inputs in Migration Mapper. BBMMs were produced at a spatial resolution of 50 m using a sequential fix interval of less than 27 hours. Large water bodies were clipped from the final output. Home range is visualized as the 50thpercentile contour (high use) and the 99thpercentile contour of the year-round utilization distribution. Home range designations for this herd may expand with a larger sample.

What’s in a tank of fuel?

The cars with the best (and worst) driving range in Australia is included in the dataset.

Content

The data is divided into two files: - PETROL.csv - DIESEL.csv

Both the datasets contain the same type of columns and one can combine the two by just adding the is_petrol_diesel column. Dataset Description is as follows: - MAKE: car company - MODEL: car model - TYPE: car type - CYL: number of cylinders - ENGINE L: engine capacity in Litres - FUEL TANK L: fuel tank capacity - CONS. L/100km: fuel consumption per 100 km RANGE km: the distance range of the car

Acknowledgements

The data is been collected from drive.com.au. A detailed and nice article has been published on site which can help while analyzing the data.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) System (MTS). The MTS represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. The Address Range Features shapefile contains the geospatial edge geometry and attributes of all unsuppressed address ranges for a county or county equivalent area. The term "address range" refers to the collection of all possible structure numbers from the first structure number to the last structure number and all numbers of a specified parity in between along an edge side relative to the direction in which the edge is coded. Single-address address ranges have been suppressed to maintain the confidentiality of the addresses they describe. Multiple coincident address range feature edge records are represented in the shapefile if more than one left or right address ranges are associated to the edge. This shapefile contains a record for each address range to street name combination. Address ranges associated to more than one street name are also represented by multiple coincident address range feature edge records. Note that this shapefile includes all unsuppressed address ranges compared to the All Lines shapefile (edges.shp) which only includes the most inclusive address range associated with each side of a street edge. The TIGER/Line shapefiles contain potential address ranges, not individual addresses. The address ranges in the TIGER/Line shapefiles are potential ranges that include the full range of possible structure numbers even though the actual structures may not exist.

The project lead for the collection of this data was Erin Zulliger. Elk (11 adult females, 3 adult males) were captured and equipped with GPS collars (Litetrack/Pinpoint Iridium collars, Lotek Wireless Inc., Newmarket, Ontario, Canada or Vectronic Aerospace) transmitting data from 2019-2023. The West Goose Lake herd migrates between traditional summer and winter seasonal ranges, and migration corridors, migration stopovers, and winter ranges were modeled separately for this herd, but were not a part of this analysis. Annual home ranges were modeled using year-round data to demarcate high use areas. GPS locations were fixed at 1-6 hour intervals in the dataset. To improve the quality of the data set, the GPS data locations fixed in 2D space and visually assessed as a bad fix by the analyst were removed.The methodology used for this migration analysis allowed for the mapping of the herd’s annual range. Brownian bridge movement models (BBMMs; Sawyer et al. 2009) were constructed with GPS collar data from 14 elk, including 44 annual home range sequences, location, date, time, and average location error as inputs in Migration Mapper. BBMMs were produced at a spatial resolution of 50 m using a sequential fix interval of less than 27 hours. Home range is visualized as the 50th percentile contour (high use) and the 99th percentile contour of the year-round utilization distribution. Annual home range designations for this herd may expand with a larger sample.