Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
This dataset is about cities in Australia. It has 187 rows. It features 7 columns including country, population, latitude, and longitude.
Attribution 3.0 (CC BY 3.0)https://creativecommons.org/licenses/by/3.0/
License information was derived automatically
Contains latest available estimates of the resident populations of areas of Australia as at 30 June in each year . These estimates are provided for Statistical Areas Level 2 - 4 (SA2s - SA4s), Greater Capital City Statistical Areas (GCCSAs), and states and territories of Australia according to the current edition of the Australian Statistical Geography Standard (ASGS).
Estimates are also provided for Local Government Areas (LGAs), Significant Urban Areas, Remoteness Areas, and Commonwealth and State Electoral Divisions.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
These population projections were prepared by the Australian Bureau of Statistics (ABS) for Geoscience Australia. The projections are not official ABS data and are owned by Geoscience Australia. These projections are for Statistical Areas Level 2 (SA2s) and Local Government Areas (LGAs), and are projected out from a base population as at 30 June 2022, by age and sex. Projections are for 30 June 2023 to 2032, with results disaggregated by age and sex.
Method
The cohort-component method was used for these projections. In this method, the base population is projected forward annually by calculating the effect of births, deaths and migration (the components) within each age-sex cohort according to the specified fertility, mortality and overseas and internal migration assumptions.
The projected usual resident population by single year of age and sex was produced in four successive stages – national, state/territory, capital city/rest of state, and finally SA2s. Assumptions were made for each level and the resulting projected components and population are constrained to the geographic level above for each year.
These projections were derived from a combination of assumptions published in Population Projections, Australia, 2022 (base) to 2071 on 23 November 2023, and historical patterns observed within each state/territory.
Projections – capital city/rest of state regions The base population is 30 June 2022 Estimated Resident Population (ERP) as published in National, state and territory population, June 2022. For fertility, the total fertility rate (at the national level) is based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, of 1.6 babies per woman being phased in from 2022 levels over five years to 2027, before remaining steady for the remainder of the projection span. Observed state/territory, and greater capital city level fertility differentials were applied to the national data so that established trends in the state and capital city/rest of state relativities were preserved. Mortality rates are based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, and assume that mortality rates will continue to decline across Australia with state/territory differentials persisting. State/territory and capital city/rest of state differentials were used to ensure projected deaths are consistent with the historical trend. Annual net overseas migration (NOM) is based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, with an assumed gain (at the national level) of 400,000 in 2022-23, increasing to 315,000 in 2023-24, then declining to 225,000 in 2026-27, after which NOM is assumed to remain constant. State and capital city/rest of state shares are based on a weighted average of NOM data from 2010 to 2019 at the state and territory level to account for the impact of COVID-19. For internal migration, net gains and losses from states and territories and capital city/rest of state regions are based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, and assume that net interstate migration will trend towards long-term historic average flows.
Projections – Statistical Areas Level 2 The base population for each SA2 is the estimated resident population in each area by single year of age and sex, at 30 June 2022, as published in Regional population by age and sex, 2022 on 28 September 2023. The SA2-level fertility and mortality assumptions were derived by combining the medium scenario state/territory assumptions from Population Projections, Australia, 2022 (base) to 2071, with recent fertility and mortality trends in each SA2 based on annual births (by sex) and deaths (by age and sex) published in Regional Population, 2021-22 and Regional Population by Age and Sex, 2022. Assumed overseas and internal migration for each SA2 is based on SA2-specific annual overseas and internal arrivals and departures estimates published in Regional Population, 2021-22 and Regional Population by Age and Sex, 2022. The internal migration data was strengthened with SA2-specific data from the 2021 Census, based on the usual residence one year before Census night question. Assumptions were applied by SA2, age and sex. Assumptions were adjusted for some SA2s, to provide more plausible future population levels, and age and sex distribution changes, including areas where populations may not age over time, for example due to significant resident student and defence force populations. Most assumption adjustments were made via the internal migration component. For some SA2s with zero or a very small population base, but where significant population growth is expected, replacement migration age/sex profiles were applied. All SA2-level components and projected projections are constrained to the medium series of capital city/rest of state data in Population Projections, Australia, 2022 (base) to 2071.
Projections – Local Government Areas The base population for each LGA is the estimated resident population in each area by single year of age and sex, at 30 June 2022, as published in Regional population by age and sex, 2022 on 28 September 2023. Projections for 30 June 2023 to 2032 were created by converting from the SA2-level population projections to LGAs by age and sex. This was done using an age-specific population correspondence, where the data for each year of the projection span were converted based on 2021 population shares across SA2s. The LGA and SA2 projections are congruous in aggregation as well as in isolation. Unlike the projections prepared at SA2 level, no LGA-specific projection assumptions were used.
Nature of projections and considerations for usage The nature of the projection method and inherent fluctuations in population dynamics mean that care should be taken when using and interpreting the projection results. The projections are not forecasts, but rather illustrate future changes which would occur if the stated assumptions were to apply over the projection period. These projections do not attempt to allow for non-demographic factors such as major government policy decisions, economic factors, catastrophes, wars and pandemics, which may affect future demographic behaviour. To illustrate a range of possible outcomes, alternative projection series for national, state/territory and capital city/rest of state areas, using different combinations of fertility, mortality, overseas and internal migration assumptions, are prepared. Alternative series are published in Population Projections, Australia, 2022 (base) to 2071. Only one series of SA2-level projections was prepared for this product. Population projections can take account of planning and other decisions by governments known at the time the projections were derived, including sub-state projections published by each state and territory government. The ABS generally does not have access to the policies or decisions of commonwealth, state and local governments and businesses that assist in accurately forecasting small area populations. Migration, especially internal migration, accounts for the majority of projected population change for most SA2s. Volatile and unpredictable small area migration trends, especially in the short-term, can have a significant effect on longer-term projection results. Care therefore should be taken with SA2s with small total populations and very small age-sex cells, especially at older ages. While these projections are calculated at the single year of age level, small numbers, and fluctuations across individual ages in the base population and projection assumptions limit the reliability of SA2-level projections at single year of age level. These fluctuations reduce and reliability improves when the projection results are aggregated to broader age groups such as the five-year age bands in this product. For areas with small elderly populations, results aggregated to 65 and over are more reliable than for the individual age groups above 65. With the exception of areas with high planned population growth, SA2s with a base total population of less than 500 have generally been held constant for the projection period in this product as their populations are too small to be reliably projected at all, however their (small) age/sex distributions may change slightly. These SA2s are listed in the appendix. The base (2022) SA2 population estimates and post-2022 projections by age and sex include small artificial cells, including 1s and 2s. These are the result of a confidentialisation process and forced additivity, to control SA2 and capital city/rest of state age/sex totals, being applied to their original values. SA2s and LGAs in this product are based on the Australian Statistical Geography Standard (ASGS) boundaries as at the 2021 Census (ASGS Edition 3). For further information, see Australian Statistical Geography Standard (ASGS) Edition 3.
Made possible by the Digital Atlas of Australia The Digital Atlas of Australia is a key Australian Government initiative being led by Geoscience Australia, highlighted in the Data and Digital Government Strategy. It brings together trusted datasets from across government in an interactive, secure, and easy-to-use geospatial platform. The Australian Bureau of Statistics (ABS) is working in partnership with Geoscience Australia to establish a set of web services to make ABS data available in the Digital Atlas of Australia.
Contact the Australian Bureau of Statistics If you have questions or feedback about this web service, please email geography@abs.gov.au. To subscribe to updates about ABS web services and geospatial products, please complete this form. For information about how the ABS manages any personal information you provide view the ABS privacy policy.
Data and geography references Source data publication: Population Projections, Australia, 2022 (base)
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
This dataset presents the preliminary estimates of the resident population by age and sex as at 30 June 2017. The data is aggregated to Greater Capital City Statistical Areas (GCCSA), according to the 2016 edition of the Australian Statistical Geography Standard (ASGS). Estimated resident population (ERP) is the official estimate of the Australian population, which links people to a place of usual residence within Australia. Usual residence within Australia refers to that address at which the person has lived or intends to live for six months or more in a given reference year. For the 30 June reference date, this refers to the calendar year around it. Estimates of the resident population are based on Census counts by place of usual residence (excluding short-term overseas visitors in Australia), with an allowance for Census net undercount, to which are added the estimated number of Australian residents temporarily overseas at the time of the Census. A person is regarded as a usual resident if they have been (or expected to be) residing in Australia for a period of 12 months or more over a 16-month period. This data is ABS data (catalogue number: 3235.0) available from the Australian Bureau of Statistics. For more information please visit the Explanatory Notes.
Attribution 2.5 (CC BY 2.5)https://creativecommons.org/licenses/by/2.5/
License information was derived automatically
Abstract This dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are presented here as originally supplied. Australian Bureau of Statistics …Show full descriptionAbstract This dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are presented here as originally supplied. Australian Bureau of Statistics (ABS) Catalogue Number: 3218.0 Population Estimates by Local Government Area, 2011 to 2012. Dataset History ABS Catalogue Number 3218.0 Population Estimates by Local Government Area, 2011 to 2012. This dataset was downloaded as a single spreadsheet file (.xls) on 29 May, 2014 from the following website: http://www.abs.gov.au/AUSSTATS/abs@.nsf/DetailsPage/3218.02011-12?OpenDocument (Metadata taken from the Explanatory Notes section of the ABS website http://www.abs.gov.au/AUSSTATS/abs@.nsf/Lookup/3218.0Explanatory Notes12011-12?OpenDocument) INTRODUCTION 1 This product contains estimates of the resident population of Statistical Areas Level 2 to 4 (SA2s - SA4s) and Greater Capital City Statistical Areas (GCCSAs) of Australia. These estimates plus those for Local Government Areas, Significant Urban Areas, Remoteness Areas and Electoral Divisions are also provided in the Downloads tab of this issue. 2 To meet the conflicting demands for accuracy and timeliness there are several versions of sub-state/territory population estimates. Preliminary estimates as at 30 June are normally available by April of the following year, revised estimates twelve months later and rebased and final estimates after the following Census. The estimates in this issue are preliminary rebased for 2011, based on the results of the 2011 Census, and preliminary for 2012. For an ABS Glossary of Terms visit: http://www.abs.gov.au/ausstats/abs@.nsf/Lookup/2901.0Main Features12011 Dataset Citation Australian Bureau of Statistics (2013) ABS Regional Population Growth Australia 2011-2012. Bioregional Assessment Source Dataset. Viewed 29 September 2017, http://data.bioregionalassessments.gov.au/dataset/c27fc127-3743-4805-b4b6-f50712cd655f.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
These population projections were prepared by the Australian Bureau of Statistics (ABS) for Geoscience Australia. The projections are not official ABS data and are owned by Geoscience Australia. These projections are for Statistical Areas Level 2 (SA2s) and Local Government Areas (LGAs), and are projected out from a base population as at 30 June 2022, by age and sex. Projections are for 30 June 2023 to 2032, with results disaggregated by age and sex.
Method
The cohort-component method was used for these projections. In this method, the base population is projected forward annually by calculating the effect of births, deaths and migration (the components) within each age-sex cohort according to the specified fertility, mortality and overseas and internal migration assumptions.
The projected usual resident population by single year of age and sex was produced in four successive stages – national, state/territory, capital city/rest of state, and finally SA2s. Assumptions were made for each level and the resulting projected components and population are constrained to the geographic level above for each year.
These projections were derived from a combination of assumptions published in Population Projections, Australia, 2022 (base) to 2071 on 23 November 2023, and historical patterns observed within each state/territory.
Projections – capital city/rest of state regions The base population is 30 June 2022 Estimated Resident Population (ERP) as published in National, state and territory population, June 2022. For fertility, the total fertility rate (at the national level) is based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, of 1.6 babies per woman being phased in from 2022 levels over five years to 2027, before remaining steady for the remainder of the projection span. Observed state/territory, and greater capital city level fertility differentials were applied to the national data so that established trends in the state and capital city/rest of state relativities were preserved. Mortality rates are based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, and assume that mortality rates will continue to decline across Australia with state/territory differentials persisting. State/territory and capital city/rest of state differentials were used to ensure projected deaths are consistent with the historical trend. Annual net overseas migration (NOM) is based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, with an assumed gain (at the national level) of 400,000 in 2022-23, increasing to 315,000 in 2023-24, then declining to 225,000 in 2026-27, after which NOM is assumed to remain constant. State and capital city/rest of state shares are based on a weighted average of NOM data from 2010 to 2019 at the state and territory level to account for the impact of COVID-19. For internal migration, net gains and losses from states and territories and capital city/rest of state regions are based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, and assume that net interstate migration will trend towards long-term historic average flows.
Projections – Statistical Areas Level 2 The base population for each SA2 is the estimated resident population in each area by single year of age and sex, at 30 June 2022, as published in Regional population by age and sex, 2022 on 28 September 2023. The SA2-level fertility and mortality assumptions were derived by combining the medium scenario state/territory assumptions from Population Projections, Australia, 2022 (base) to 2071, with recent fertility and mortality trends in each SA2 based on annual births (by sex) and deaths (by age and sex) published in Regional Population, 2021-22 and Regional Population by Age and Sex, 2022. Assumed overseas and internal migration for each SA2 is based on SA2-specific annual overseas and internal arrivals and departures estimates published in Regional Population, 2021-22 and Regional Population by Age and Sex, 2022. The internal migration data was strengthened with SA2-specific data from the 2021 Census, based on the usual residence one year before Census night question. Assumptions were applied by SA2, age and sex. Assumptions were adjusted for some SA2s, to provide more plausible future population levels, and age and sex distribution changes, including areas where populations may not age over time, for example due to significant resident student and defence force populations. Most assumption adjustments were made via the internal migration component. For some SA2s with zero or a very small population base, but where significant population growth is expected, replacement migration age/sex profiles were applied. All SA2-level components and projected projections are constrained to the medium series of capital city/rest of state data in Population Projections, Australia, 2022 (base) to 2071.
Projections – Local Government Areas The base population for each LGA is the estimated resident population in each area by single year of age and sex, at 30 June 2022, as published in Regional population by age and sex, 2022 on 28 September 2023. Projections for 30 June 2023 to 2032 were created by converting from the SA2-level population projections to LGAs by age and sex. This was done using an age-specific population correspondence, where the data for each year of the projection span were converted based on 2021 population shares across SA2s. The LGA and SA2 projections are congruous in aggregation as well as in isolation. Unlike the projections prepared at SA2 level, no LGA-specific projection assumptions were used.
Nature of projections and considerations for usage The nature of the projection method and inherent fluctuations in population dynamics mean that care should be taken when using and interpreting the projection results. The projections are not forecasts, but rather illustrate future changes which would occur if the stated assumptions were to apply over the projection period. These projections do not attempt to allow for non-demographic factors such as major government policy decisions, economic factors, catastrophes, wars and pandemics, which may affect future demographic behaviour. To illustrate a range of possible outcomes, alternative projection series for national, state/territory and capital city/rest of state areas, using different combinations of fertility, mortality, overseas and internal migration assumptions, are prepared. Alternative series are published in Population Projections, Australia, 2022 (base) to 2071. Only one series of SA2-level projections was prepared for this product. Population projections can take account of planning and other decisions by governments known at the time the projections were derived, including sub-state projections published by each state and territory government. The ABS generally does not have access to the policies or decisions of commonwealth, state and local governments and businesses that assist in accurately forecasting small area populations. Migration, especially internal migration, accounts for the majority of projected population change for most SA2s. Volatile and unpredictable small area migration trends, especially in the short-term, can have a significant effect on longer-term projection results. Care therefore should be taken with SA2s with small total populations and very small age-sex cells, especially at older ages. While these projections are calculated at the single year of age level, small numbers, and fluctuations across individual ages in the base population and projection assumptions limit the reliability of SA2-level projections at single year of age level. These fluctuations reduce and reliability improves when the projection results are aggregated to broader age groups such as the five-year age bands in this product. For areas with small elderly populations, results aggregated to 65 and over are more reliable than for the individual age groups above 65. With the exception of areas with high planned population growth, SA2s with a base total population of less than 500 have generally been held constant for the projection period in this product as their populations are too small to be reliably projected at all, however their (small) age/sex distributions may change slightly. These SA2s are listed in the appendix. The base (2022) SA2 population estimates and post-2022 projections by age and sex include small artificial cells, including 1s and 2s. These are the result of a confidentialisation process and forced additivity, to control SA2 and capital city/rest of state age/sex totals, being applied to their original values. SA2s and LGAs in this product are based on the Australian Statistical Geography Standard (ASGS) boundaries as at the 2021 Census (ASGS Edition 3). For further information, see Australian Statistical Geography Standard (ASGS) Edition 3.
Made possible by the Digital Atlas of Australia The Digital Atlas of Australia is a key Australian Government initiative being led by Geoscience Australia, highlighted in the Data and Digital Government Strategy. It brings together trusted datasets from across government in an interactive, secure, and easy-to-use geospatial platform. The Australian Bureau of Statistics (ABS) is working in partnership with Geoscience Australia to establish a set of web services to make ABS data available in the Digital Atlas of Australia.
Contact the Australian Bureau of Statistics If you have questions or feedback about this web service, please email geography@abs.gov.au. To subscribe to updates about ABS web services and geospatial products, please complete this form. For information about how the ABS manages any personal information you provide view the ABS privacy policy.
Data and geography references Source data publication: Population Projections, Australia, 2022 (base)
In 2021, the proportion of Aboriginal and/or Torres Strait Islander people living in major cities in Australia amounted to 41.1 percent of the Aboriginal and/or Torres Strait Islander population. By comparison, 73.7 percent of the non-Indigenous population lived in major cities. Although the majority of the Aboriginal and/or Torres Strait Islander population lived in major cities and inner regional areas, almost one in ten lived in very remote communities.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
This dataset presents the estimates of the internal migration statistics of Australia by Greater Capital City Statistical Area (GCCSA) following the 2011 Australian Statistical Geography Standard (ASGS). The dataset spans from the 2006-07 financial year up to the 2015-16 financial year.
Regional internal migration is the movement of people from one region to another within Australia (both interstate and intrastate). For example, it incorporates moves from a GCCSA to any other GCCSA within the country. Net regional internal migration is the net gain or loss of population through this movement.
The ABS has developed a new series of annual regional internal migration estimates (RIME) based on the 2011 edition of the Australian Statistical Geography Standard (ASGS). The Medicare and Defence data used for estimating interstate migration is now also used to estimate internal migration below the state/territory level. A similar method was used to prepare RIME at the LGA level, based on 2011 boundaries.
This data is Australian Bureau of Statistics (ABS) data (catalogue number: 3412.0) used with permission from the ABS.
For more information please visit the ABS Explanatory Notes.
Please note: RIME are not directly comparable with estimated resident populations (ERPs) because of the different methods and source data used to prepare each series. The combination of natural increase and net migration (internal and overseas) therefore may not correspond with change in ERP. AURIN has spatially enabled the original data.
https://koordinates.com/license/attribution-4-0-international/https://koordinates.com/license/attribution-4-0-international/
Greater Capital City Statistical Areas (GCCSAs) represent the Capital City regions of each state and territory in Australia.
They are designed to represent the functional area of each of the eight state and territory capital cities. This includes populations who regularly socialise, shop or work within the city, but may live either in the city or in the small towns and rural areas surrounding the city.
Within each state and territory, the area outside of a capital city is called the ‘Rest of State’ region. The ‘Rest of State’ region together with the capital city area builds the whole state or territory.
Use GCCSAs if you would like to understand how a population interacts within and around a Capital City. Examples include but are not limited to, journey to work, cultural diversity, long-term health conditions, usual address and internal migration.
Australian Bureau of Statistics (Jul2021-Jun2026), Data services and APIs, ABS Website, accessed 25 July 2023.
https://www.abs.gov.au/website-privacy-copyright-and-disclaimer#copyright-and-creative-commons
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
This horizontal bar chart displays median age (year) by capital city using the aggregation average, weighted by population in Australia and New Zealand. The data is filtered where the date is 2021. The data is about countries per year.
ABS Statistics about the population, density and components of change (births, deaths, migration) for Australia's capital cities and regions.This dataset is based on ABS Population estimates and components by LGA Excel files as data sources.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
This data collection contains de-identified clinical health service utilisation data from Bendigo Health and the General Practitioners Practices associated with the Loddon Mallee Murray Medicare Local. The collection also includes associated population health data from the ABS, AIHW and the Municipal Health Plans. Health researchers have a major interest in how clinical data can be used to monitor population health and health care in rural and regional Australia through analysing a broad range of factors shown to impact the health of different populations. The Population Health data collection provides students, managers, clinicians and researchers the opportunity to use clinical data in the study of population health, including the analysis of health risk factors, disease trends and health care utilisation and outcomes.Temporal range (data time period):2004 to 2014Spatial coverage:Bendigo Latitude -36.758711200000010000, Bendigo Longitude 144.283745899999990000
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
This topographic dataset contains point features representing the centre of named towns and cities.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
The National Regional Profile (NRP) presents data for 2010-14 for Local Government Areas, Australian Statistical Geography Standard regions (Statistical Areas 2, 3 and 4, and Greater Capital City Statistical Areas), States/Territories and Australia.\r \r The NRP is designed for users interested in the socio-economic and environmental characteristics of regions - and in comparisons with similar geographies across Australia. Data are arranged under the broad themes/topics of Economy, Industry, People, and Energy and Environment.
https://koordinates.com/license/attribution-4-0-international/https://koordinates.com/license/attribution-4-0-international/
Statistical Areas Level 2 (SA2s) are medium-sized general purpose areas built up from whole Statistical Areas Level 1 (SA1s). They generally have a population between 3,000 and 25,000.
Their purpose is to represent a community that interacts together socially and economically. SA2s represent suburbs within cities and catchments of rural areas. In remote and regional areas, SA2s have smaller populations and cover a larger area than those in urban areas.
Use SA2s if you are analysing and comparing Census data at a suburb level in urban areas over Census years. A variety of other ABS data is released at the SA2 level for comparison.
Australian Bureau of Statistics (Jul2021-Jun2026), Data services and APIs, ABS Website, accessed 25 July 2023.
https://www.abs.gov.au/website-privacy-copyright-and-disclaimer#copyright-and-creative-commons
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
This bar chart displays incidence of HIV (per 1,000 uninfected population) by capital city using the aggregation average, weighted by population in Australia and New Zealand. The data is filtered where the date is 2021. The data is about countries per year.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
Population density metrics for 2011 Statistical Area Level 2 (SA2) within 2011 Greater Capital City Statistical Areas (GCCSA), including SA2 Population-weighted density (PWD) for 2011 and 2014, PWD change 2011-2014, and ERP population counts by density classes. Selected Density Classes were based on the Australian Population Density Grid published by the ABS, December 2014 (cat. no. 1270.0.55.007). Corresponding population metrics for 2011 GCCSAs. PWD using standardised 1km grid cells provides a more comparable measure of the density in larger regions. It does this by weighting the density using the proportion of population living at that density. In this way the density measure reflects the density at which people actually live. This removes the effect of large unpopulated areas that may be within the regions being compared. In this way comparisons between regions are more valid.
The map service can be viewed at http://soe.terria.io/#share=s-AgXEN0N0Q95icRW7M9JIC9IYBdE
Downloadable spatial data also available below.
Map prepared by the ABS and presented as Figure BLT3 in Built environment theme of the 2016 State of the Environment Report, available at http://www.soe.environment.gov.au.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
This bar chart displays health expenditure per capita (current US$) by capital city using the aggregation average, weighted by population in Australia and New Zealand. The data is filtered where the date is 2021. The data is about countries per year.
Attribution-NonCommercial 4.0 (CC BY-NC 4.0)https://creativecommons.org/licenses/by-nc/4.0/
License information was derived automatically
This table contains shelter indicators (homelessness of city population) for ACT (SA3) and surrounding NSW Councils (LGA) from ABS estimate of homelessness based on the 2011 Census of Population and Housing.
https://koordinates.com/license/attribution-4-0-international/https://koordinates.com/license/attribution-4-0-international/
Significant Urban Areas (SUA) are used to output a broad range of ABS social and demographic statistics. They represent towns and cities of 10,000 people or more.
SUAs are built of Statistical Areas Level 2 (SA2s). They are defined by Urban Centres from the Urban Centres and Localities (UCLs) geography i.e. a single SUA can represent either a single Urban Centre or a cluster of related Urban Centres.
Areas that are not in an SUA are combined to form a ‘Not in any significant urban area’ region for each state or territory.
SUAs are useful to understand the characteristics of the built up area of cities and towns. A wider range of ABS data is also available for SUAs such as Estimated Resident Population which can be used for more detailed analysis.
Australian Bureau of Statistics (Jul2021-Jun2026), Data services and APIs, ABS Website, accessed 25 July 2023.
https://www.abs.gov.au/website-privacy-copyright-and-disclaimer#copyright-and-creative-commons
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
This dataset is about cities in Australia. It has 187 rows. It features 7 columns including country, population, latitude, and longitude.