The Access Network Map of England is a national composite dataset of Access layers, showing analysis of extent of Access provision for each Lower Super Output Area (LSOA), as a percentage or area coverage of access in England. The ‘Access Network Map’ was developed by Natural England to inform its work to improve opportunities for people to enjoy the natural environment. This map shows, across England, the relative abundance of accessible land in relation to where people live. Due to issues explained below, the map does not, and cannot, provide a definitive statement of where intervention is necessary. Rather, it should be used to identify areas of interest which require further exploration. Natural England believes that places where people can enjoy the natural environment should be improved and created where they are most wanted. Access Network Maps help support this work by providing means to assess the amount of accessible land available in relation to where people live. They combine all the available good quality data on access provision into a single dataset and relate this to population. This provides a common foundation for regional and national teams to use when targeting resources to improve public access to greenspace, or projects that rely on this resource. The Access Network Maps are compiled from the datasets available to Natural England which contain robust, nationally consistent data on land and routes that are normally available to the public and are free of charge. Datasets contained in the aggregated data:•
Agri-environment scheme permissive access (routes and open access)•
CROW access land (including registered common land and Section 16)•
Country Parks•
Cycleways (Sustrans Routes) including Local/Regional/National and Link Routes•
Doorstep Greens•
Local Nature Reserves•
Millennium Greens•
National Nature Reserves (accessible sites only)•
National Trails•
Public Rights of Way•
Forestry Commission ‘Woods for People’ data•
Village Greens – point data only Due to the quantity and complexity of data used, it is not possible to display clearly on a single map the precise boundary of accessible land for all areas. We therefore selected a unit which would be clearly visible at a variety of scales and calculated the total area (in hectares) of accessible land in each. The units we selected are ‘Lower Super Output Areas’ (LSOAs), which represent where approximately 1,500 people live based on postcode. To calculate the total area of accessible land for each we gave the linear routes a notional width of 3 metres so they could be measured in hectares. We then combined together all the datasets and calculated the total hectares of accessible land in each LSOA. For further information about this data see the following links:Access Network Mapping GuidanceAccess Network Mapping Metadata Full metadata can be viewed on data.gov.uk.

This file contains the digital vector boundaries for NHS England Regions in England as at July 2022. The boundaries available are: (BUC) Ultra generalised (500m) - clipped to the coastline (Mean High Water mark). Contains both Ordnance Survey and ONS Intellectual Property Rights.REST URL of ArcGIS for INSPIRE View Service – https://services1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/rest/services/NHS_England_(Regions)_(July_2022)_EN_BUC/MapServerREST URL of ArcGIS for INSPIRE Feature DownloadService – https://dservices1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/services/NHS_England_Regions_July_2022_EN_BUC/WFSServer?service=wfs&request=getcapabilitiesREST URL of Feature Access Service – https://services1.arcgis.com/ESMARspQHYMw9BZ9/arcgis/rest/services/NHS_England_Regions_July_2022_EN_BUC_2022/FeatureServer

A collection of hydrogeological maps created by the British Geological Survey between 1967 and 1994. The maps in the collection cover aspects of groundwater availability, exploitation and quality and were published at various scales from 1:25 000 to 1:625 000 A hydrogeological map is a specialized type of map that illustrates the distribution and characteristics of hydrogeological features in a particular area. Hydrogeological maps of the UK provide information on major aquifers, including geological and lithological information, surface drainage systems and water quality issues. The 23 maps show information on surface water features, the three dimensional geometry of aquifers, groundwater levels, abstractions and quality including saline intrusion in varying amounts of detail. They range in scale from 1:625 000, for the national map of the hydrogeology of England and Wales, down to 1:25 000 for some of the smaller regional maps. These maps are important tools for understanding and managing groundwater resources, as well as for addressing water-related environmental issues. These maps are hard-copy paper records stored in the National Geoscience Data Centre (NGDC), and are delivered as digital scans through the BGS website.

This file contains the digital vector boundaries for Regions in England as at December 2024.

The boundaries available are: Generalised Clipped (BGC) - Generalised to 20m and clipped to the coastline (Mean High Water mark) and more generalised than the BFE boundaries.

Contains both Ordnance Survey and ONS Intellectual Property Rights.TopoJSON Shapefile for Power BIOn the Export tab you will find a file under the Alternative exports. This file is in TopoJSON format and is ready for use in compatible visualisation tools such as Power BI or Mapbox.

A PDF map that shows the Regions in England, as at December 2018. (File Size - 486 KB)

A PDF map that shows the counties and unitary authorities in the United Kingdom as at 1 April 2023. (File Size - 583 KB)

A PDF map showing the Rural Urban Classification (2011) of the LSOAs in the East Midlands Region. (File Size - 2 MB)

This dataset is part of the Geographical repository maintained by Opendatasoft. This dataset contains data for regions in the United Kingdom.Government offices for the regions (GOR) were established across England in 1994. Reflecting a number of government departments, their aim was to work in partnership with local people and organisations in order to maximise prosperity and the quality of life within their area. In 1996 the GORs became the primary classification for the presentation of regional statistics. GORs were built up of complete counties/unitary authorities, so although they were subject to change, they always reflected administrative boundaries as at the end of the previous year. Scotland, Wales and Northern Ireland were not subdivided into GORs but are listed with them as regions in UK-wide statistical comparisons. After the Comprehensive Spending Review, it was confirmed that the GORs would close on 31 March 2011, shifting focus away from regions to local areas. However, there is still a requirement to maintain a region-level geography for statistical purposes. Processors and tools are using this data.EnhancementsAdd ISO 3166-3 codes.Simplify geometries to provide better performance across the services.Add administrative hierarchy.

A PDF map that shows the regions and their constituent counties and unitary authorities in the United Kingdom as at 1 April 2020. (File Size - 557 KB)

A PDF map showing the Output Areas in the West Midlands Region of England as at December 2011. (File Size - 26 MB)

Hydrogeological maps of the UK at various scales. Hydrogeological maps of the UK provide information on major aquifers, including geological and lithological information, surface drainage systems and water quality issues. The 23 maps show information on surface water features, the three dimensional geometry of aquifers, groundwater levels, abstractions and quality including saline intrusion in varying amounts of detail. They range in scale from 1:625 000, for the national map of the hydrogeology of England and Wales, down to 1:25 000 for some of the smaller regional maps.

The Marine Maps and Chart Archive held by BGS contains maps created by BGS (the majority of which result from BGS offshore mapping projects) and also maps acquired from various other sources (e.g. UK Hydrographic Office and MCA Civil Hydrography Programme survey charts). The maps which date from the 1960s onwards are very variable in subject type and scale ranging from survey navigation to geological interpretation. The maps are primarily for the UKCS (United Kingdom Continental Shelf). The coverage of some map types is the entire UKCS whilst other have only regional or localised extent. The maps which are a mix of paper and digital are applicable to a wide range of uses including environmental, geotechnical, geophysical and geological studies. range of uses including environmental, geotechnical, geophysical and geological studies. Scanned maps can be viewed via the BGS maps portal http://www.bgs.ac.uk/data/maps.

A PDF map showing the Public Health England Centres and Public Health England Regions in England as at December 2013. (File Size - 183 KB)

This is an Ash (Fraxinus excelsior) host map for Great Britain at the 1 km x 1 km scale. The units are in terms of ha or ash per 1km x 1km grid square. There are 100 ha in 1km x 1 km, so this can be thought of as a percent.
It was created generating a 20m x 20m land use layer based on the UKCEH Land Cover Map for 2019, deriving areas of broadleaved tree cover for each cell of the land use layer and estimating the percentage of ash within broadleaf, which were assigned dependent on land use and region (see more details about the methods in data preparation and processing activities). The percentage of ash and area of broadleaf trees were combined to give an area of ash for each land use in cell and this was aggregated (summed) across all land use types to give a 1km by 1km ash area map.

A PDF map that shows the Combined Authorities and Regions in England as at December 2021. (File Size - 454 KB)

A PDF map that shows the Combined Authorities and Regions in England as at December 2017. (File Size - 191 KB)

A PDF map showing the Rural Urban Classification (2011) of the MSOAs in the East of England Region. (File Size - 932 KB)

Main Topics:

In the middle of 2001 Roger Kain and Richard Oliver, from the University of Exeter, published a substantial work entitled Historic Parishes of England and Wales: Electronic Map - Gazetteer- Metadata. This was the final product of a project aimed at locating and mapping the boundaries of parish and sub-parish units of the mid-nineteenth century. The authors published the results in a series of electronic maps supplied on CD-ROM. Each one of these 115 maps contain a scanned 1”:1 mile OS New Popular Series map, overlain by the boundaries. A reference number can be found in each of the polygons that can then be used to look up information about that parish in gazetteer in an accompanying book.

A major limitation of this work is that although the boundaries are in digital form, they are divided into 115 tiles, none of which have any spatial co-ordinate information inherent in them. This means that although the maps are invaluable as a reference tool, they can not be used together within a GIS to select, analyse and present historic information.

We have therefore created a single digital map of the boundaries to provide a single, continuous coverage of polygons, each of which contain the information provided by Kain and Oliver in their accompanying book. This information includes the parish name, Ancient County, and a reference number that coincides with entries for that parish in the 1851 census report.

It is recommended that users also order disc 1 of study 4348; Historic Parishes of England and Wales : an Electronic Map of Boundaries before 1850 with a Gazetteer and Metadata



Please note: this study does not include information on named individuals and would therefore not be useful for personal family history research.