Population figures over a 25-year period, by five-year age groups and sex for regions in England. 2022-based datasets are the latest projection.

Population figures over a 25-year period, by five-year age groups and sex for clinical commissioning groups in England. 2018-based estimates are the latest principal projection.

The 2015 to 2040 population projections for the state of Connecticut were developed by the Connecticut State Data Center for planning, analysis, and to inform decision making. The projections are individual population projections for the resident population of Connecticut and were developed on July 31, 2017 and revised and republished on September 19, 2017 to address an error in the original dataset that was published on July 31, 2017. The County and Regional Council of Government Projections were published on June 29, 2018 and are based on the projections developed on September 19, 2017. These projections supersede the 2012 edition of the population projections developed by the Connecticut State Data Center.

Every four years, the Wasatch Front’s two metropolitan planning organizations (MPOs), Wasatch Front Regional Council (WFRC) and Mountainland Association of Governments (MAG), collaborate to update a set of annual small area -- traffic analysis zone and ‘city area’, see descriptions below) -- population and employment projections for the Salt Lake City-West Valley City (WFRC), Ogden-Layton (WFRC), and Provo-Orem (MAG) urbanized areas.

These projections are primarily developed for the purpose of informing long-range transportation infrastructure and services planning done as part of the 4 year Regional Transportation Plan update cycle, as well as Utah’s Unified Transportation Plan, 2023-2050. Accordingly, the foundation for these projections is largely data describing existing conditions for a 2019 base year, the first year of the latest RTP process. The projections are included in the official travel models, which are publicly released at the conclusion of the RTP process.

Projections within the Wasatch Front urban area ( SUBAREAID = 1) were produced with using the Real Estate Market Model as described below. Socioeconomic forecasts produced for Cache MPO (Cache County, SUBAREAID = 2), Dixie MPO (Washington County, SUBAREAID = 3), Summit County (SUBAREAID = 4), and UDOT (other areas of the state, SUBAREAID = 0) all adhere to the University of Utah Gardner Policy Institute's county-level projection controls, but other modeling methods are used to arrive at the TAZ-level forecasts for these areas.

As these projections may be a valuable input to other analyses, this dataset is made available here as a public service for informational purposes only. It is solely the responsibility of the end user to determine the appropriate use of this dataset for other purposes.

Wasatch Front Real Estate Market Model (REMM) Projections

WFRC and MAG have developed a spatial statistical model using the UrbanSim modeling platform to assist in producing these annual projections. This model is called the Real Estate Market Model, or REMM for short. REMM is used for the urban portion of Weber, Davis, Salt Lake, and Utah counties. REMM relies on extensive inputs to simulate future development activity across the greater urbanized region. Key inputs to REMM include:

Demographic data from the decennial census
County-level population and employment projections -- used as REMM control totals -- are produced by the University of Utah’s Kem C. Gardner Policy Institute (GPI) funded by the Utah State Legislature
Current employment locational patterns derived from the Utah Department of Workforce Services
Land use visioning exercises and feedback, especially in regard to planned urban and local center development, with city and county elected officials and staff
Current land use and valuation GIS-based parcel data stewarded by County Assessors
Traffic patterns and transit service from the regional Travel Demand Model that together form the landscape of regional accessibility to workplaces and other destinations
Calibration of model variables to balance the fit of current conditions and dynamics at the county and regional level

‘Traffic Analysis Zone’ Projections

The annual projections are forecasted for each of the Wasatch Front’s 3,546 Traffic Analysis Zone (TAZ) geographic units. TAZ boundaries are set along roads, streams, and other physical features and average about 600 acres (0.94 square miles). TAZ sizes vary, with some TAZs in the densest areas representing only a single city block (25 acres).

‘City Area’ Projections

The TAZ-level output from the model is also available for ‘city areas’ that sum the projections for the TAZ geographies that roughly align with each city’s current boundary. As TAZs do not align perfectly with current city boundaries, the ‘city area’ summaries are not projections specific to a current or future city boundary, but the ‘city area’ summaries may be suitable surrogates or starting points upon which to base city-specific projections.

Summary Variables in the Datasets

Annual projection counts are available for the following variables (please read Key Exclusions note below):

Demographics

Household Population Count (excludes persons living in group quarters) 
Household Count (excludes group quarters) 

Employment

Typical Job Count (includes job types that exhibit typical commuting and other travel/vehicle use patterns)
Retail Job Count (retail, food service, hotels, etc)
Office Job Count (office, health care, government, education, etc)
Industrial Job Count (manufacturing, wholesale, transport, etc)
Non-Typical Job Count* (includes agriculture, construction, mining, and home-based jobs) This can be calculated by subtracting Typical Job Count from All Employment Count 
All Employment Count* (all jobs, this sums jobs from typical and non-typical sectors).

• These variables includes REMM’s attempt to estimate construction jobs in areas that experience new and re-development activity. Areas may see short-term fluctuations in Non-Typical and All Employment counts due to the temporary location of construction jobs.

Key Exclusions from TAZ and ‘City Area’ Projections

As the primary purpose for the development of these population and employment projections is to model future travel in the region, REMM-based projections do not include population or households that reside in group quarters (prisons, senior centers, dormitories, etc), as residents of these facilities typically have a very low impact on regional travel. USTM-based projections also excludes group quarter populations. Group quarters population estimates are available at the county-level from GPI and at various sub-county geographies from the Census Bureau.

Statewide Projections

Population and employment projections for the Wasatch Front area can be combined with those developed by Dixie MPO (St. George area), Cache MPO (Logan area), and the Utah Department of Transportation (for the remainder of the state) into one database for use in the Utah Statewide Travel Model (USTM). While projections for the areas outside of the Wasatch Front use different forecasting methods, they contain the same summary-level population and employment projections making similar TAZ and ‘City Area’ data available statewide. WFRC plans, in the near future, to add additional areas to these projections datasets by including the projections from the USTM model.

Important Dataset Update 6/24/2020:Summit and Wasatch Counties updated.Important Dataset Update 6/12/2020:MAG area updated.Important Dataset Update 7/15/2019: This dataset now includes projections for all populated statewide traffic analysis zones (TAZs). Projections within the Wasatch Front urban area ( SUBAREAID = 1) were produced with using the Real Estate Market Model as described below. Socioeconomic forecasts produced for Cache MPO (Cache County, SUBAREAID = 2), Dixie MPO (Washington County, SUBAREAID = 3), Summit County (SUBAREAID = 4), and UDOT (other areas of the state, SUBAREAID = 0) all adhere to the University of Utah Gardner Policy Institute's county-level projection controls, but other modeling methods are used to arrive at the TAZ-level forecasts for these areas.As with any dataset that presents projections into the future, it is important to have a full understanding of the data before using it. Before using this data, you are strongly encouraged to read the metadata description below and direct any questions or feedback about this data to analytics@wfrc.org. Every four years, the Wasatch Front’s two metropolitan planning organizations (MPOs), Wasatch Front Regional Council (WFRC) and Mountainland Association of Governments (MAG), collaborate to update a set of annual small area -- traffic analysis zone and ‘city area’, see descriptions below) -- population and employment projections for the Salt Lake City-West Valley City (WFRC), Ogden-Layton (WFRC), and Provo-Orem (MAG) urbanized areas. These projections are primarily developed for the purpose of informing long-range transportation infrastructure and services planning done as part of the 4 year Regional Transportation Plan update cycle, as well as Utah’s Unified Transportation Plan, 2019-2050. Accordingly, the foundation for these projections is largely data describing existing conditions for a 2015 base year, the first year of the latest RTP process. The projections are included in the official travel models, which are publicly released at the conclusion of the RTP process. As these projections may be a valuable input to other analyses, this dataset is made available at http://data.wfrc.org/search?q=projections as a public service for informational purposes only. It is solely the responsibility of the end user to determine the appropriate use of this dataset for other purposes. Wasatch Front Real Estate Market Model (REMM) ProjectionsWFRC and MAG have developed a spatial statistical model using the UrbanSim modeling platform to assist in producing these annual projections. This model is called the Real Estate Market Model, or REMM for short. REMM is used for the urban portion of Weber, Davis, Salt Lake, and Utah counties. REMM relies on extensive inputs to simulate future development activity across the greater urbanized region. Key inputs to REMM include:Demographic data from the decennial census;County-level population and employment projections -- used as REMM control totals -- are produced by the University of Utah’s Kem C. Gardner Policy Institute (GPI) funded by the Utah State Legislature;Current employment locational patterns derived from the Utah Department of Workforce Services; Land use visioning exercises and feedback, especially in regard to planned urban and local center development, with city and county elected officials and staff;Current land use and valuation GIS-based parcel data stewarded by County Assessors;Traffic patterns and transit service from the regional Travel Demand Model that together form the landscape of regional accessibility to workplaces and other destinations; andCalibration of model variables to balance the fit of current conditions and dynamics at the county and regional level.‘Traffic Analysis Zone’ ProjectionsThe annual projections are forecasted for each of the Wasatch Front’s 2,800+ Traffic Analysis Zone (TAZ) geographic units. TAZ boundaries are set along roads, streams, and other physical features and average about 600 acres (0.94 square miles). TAZ sizes vary, with some TAZs in the densest areas representing only a single city block (25 acres). ‘City Area’ ProjectionsThe TAZ-level output from the model is also available for ‘city areas’ that sum the projections for the TAZ geographies that roughly align with each city’s current boundary. As TAZs do not align perfectly with current city boundaries, the ‘city area’ summaries are not projections specific to a current or future city boundary, but the ‘city area’ summaries may be suitable surrogates or starting points upon which to base city-specific projections.Summary Variables in the DatasetsAnnual projection counts are available for the following variables (please read Key Exclusions note below):DemographicsHousehold Population Count (excludes persons living in group quarters)Household Count (excludes group quarters)EmploymentTypical Job Count (includes job types that exhibit typical commuting and other travel/vehicle use patterns)Retail Job Count (retail, food service, hotels, etc)Office Job Count (office, health care, government, education, etc)Industrial Job Count (manufacturing, wholesale, transport, etc)Non-Typical Job Count* (includes agriculture, construction, mining, and home-based jobs) This can be calculated by subtracting Typical Job Count from All Employment Count.All Employment Count* (all jobs, this sums jobs from typical and non-typical sectors).* These variable includes REMM’s attempt to estimate construction jobs in areas that experience new and re-development activity. Areas may see short-term fluctuations in Non-Typical and All Employment counts due to the temporary location of construction jobs.Population and employment projections for the Wasatch Front area can be combined with those developed by Dixie MPO (St. George area), Cache MPO (Logan area), and the Utah Department of Transportation (for the remainder of the state) into one database for use in the Utah Statewide Travel Model (USTM). While projections for the areas outside of the Wasatch Front use different forecasting methods, they contain the same summary-level population and employment projections making similar TAZ and ‘City Area’ data available statewide. WFRC plans, in the near future, to add additional areas to these projections datasets by including the projections from the USTM model.Key Exclusions from TAZ and ‘City Area’ ProjectionsAs the primary purpose for the development of these population and employment projections is to model future travel in the region, REMM-based projections do not include population or households that reside in group quarters (prisons, senior centers, dormitories, etc), as residents of these facilities typically have a very low impact on regional travel. USTM-based projections also excludes group quarter populations. Group quarters population estimates are available at the county-level from GPI and at various sub-county geographies from the Census Bureau.

Population Projections: Population Growth per thousand inhabitants according to year. Annual. National.

The Population Projections for Newfoundland and Labrador are produced by the Economic Research and Analysis Division of the Department of Finance. The projections are generally released in April of each year. The current projections were produced in April 2014. The projections provide population by age (five-year age cohorts) and gender for various geographies in Newfoundland and Labrador until the year 2035. Three different projection scenarios are available. The medium scenario is considered to be the "most likely" scenario and is integrated with government's economic forecast. This scenario is the one used by government for planning purposes.

Vintage 2024 population projections of North Carolina counties produced by the State Demographer of the North Carolina Office of State Budget & Management. Population by sex (male/female) and single years of age for the total population. Includes the total population and median age for July 1, 2020 through July 1, 2060. Includes revised population estimates for 2020-2022, 2023 certified population estimate, and July 1, 2024 through July 1, 2060 population projections.

These population projections were prepared by the Australian Bureau of Statistics (ABS) for Geoscience Australia. The projections are not official ABS data and are owned by Geoscience Australia. These projections are for Statistical Areas Level 2 (SA2s) and Local Government Areas (LGAs), and are projected out from a base population as at 30 June 2022, by age and sex. Projections are for 30 June 2023 to 2032, with results disaggregated by age and sex.

Method The cohort-component method was used for these projections. In this method, the base population is projected forward annually by calculating the effect of births, deaths and migration (the components) within each age-sex cohort according to the specified fertility, mortality and overseas and internal migration assumptions. The projected usual resident population by single year of age and sex was produced in four successive stages – national, state/territory, capital city/rest of state, and finally SA2s. Assumptions were made for each level and the resulting projected components and population are constrained to the geographic level above for each year.
These projections were derived from a combination of assumptions published in Population Projections, Australia, 2022 (base) to 2071 on 23 November 2023, and historical patterns observed within each state/territory.

Projections – capital city/rest of state regions The base population is 30 June 2022 Estimated Resident Population (ERP) as published in National, state and territory population, June 2022. For fertility, the total fertility rate (at the national level) is based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, of 1.6 babies per woman being phased in from 2022 levels over five years to 2027, before remaining steady for the remainder of the projection span. Observed state/territory, and greater capital city level fertility differentials were applied to the national data so that established trends in the state and capital city/rest of state relativities were preserved. Mortality rates are based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, and assume that mortality rates will continue to decline across Australia with state/territory differentials persisting. State/territory and capital city/rest of state differentials were used to ensure projected deaths are consistent with the historical trend. Annual net overseas migration (NOM) is based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, with an assumed gain (at the national level) of 400,000 in 2022-23, increasing to 315,000 in 2023-24, then declining to 225,000 in 2026-27, after which NOM is assumed to remain constant. State and capital city/rest of state shares are based on a weighted average of NOM data from 2010 to 2019 at the state and territory level to account for the impact of COVID-19. For internal migration, net gains and losses from states and territories and capital city/rest of state regions are based on the medium assumption used in Population Projections, Australia, 2022 (base) to 2071, and assume that net interstate migration will trend towards long-term historic average flows.

Projections – Statistical Areas Level 2 The base population for each SA2 is the estimated resident population in each area by single year of age and sex, at 30 June 2022, as published in Regional population by age and sex, 2022 on 28 September 2023. The SA2-level fertility and mortality assumptions were derived by combining the medium scenario state/territory assumptions from Population Projections, Australia, 2022 (base) to 2071, with recent fertility and mortality trends in each SA2 based on annual births (by sex) and deaths (by age and sex) published in Regional Population, 2021-22 and Regional Population by Age and Sex, 2022. Assumed overseas and internal migration for each SA2 is based on SA2-specific annual overseas and internal arrivals and departures estimates published in Regional Population, 2021-22 and Regional Population by Age and Sex, 2022. The internal migration data was strengthened with SA2-specific data from the 2021 Census, based on the usual residence one year before Census night question. Assumptions were applied by SA2, age and sex. Assumptions were adjusted for some SA2s, to provide more plausible future population levels, and age and sex distribution changes, including areas where populations may not age over time, for example due to significant resident student and defence force populations. Most assumption adjustments were made via the internal migration component. For some SA2s with zero or a very small population base, but where significant population growth is expected, replacement migration age/sex profiles were applied. All SA2-level components and projected projections are constrained to the medium series of capital city/rest of state data in Population Projections, Australia, 2022 (base) to 2071.

Projections – Local Government Areas The base population for each LGA is the estimated resident population in each area by single year of age and sex, at 30 June 2022, as published in Regional population by age and sex, 2022 on 28 September 2023. Projections for 30 June 2023 to 2032 were created by converting from the SA2-level population projections to LGAs by age and sex. This was done using an age-specific population correspondence, where the data for each year of the projection span were converted based on 2021 population shares across SA2s. The LGA and SA2 projections are congruous in aggregation as well as in isolation. Unlike the projections prepared at SA2 level, no LGA-specific projection assumptions were used.

Nature of projections and considerations for usage The nature of the projection method and inherent fluctuations in population dynamics mean that care should be taken when using and interpreting the projection results. The projections are not forecasts, but rather illustrate future changes which would occur if the stated assumptions were to apply over the projection period. These projections do not attempt to allow for non-demographic factors such as major government policy decisions, economic factors, catastrophes, wars and pandemics, which may affect future demographic behaviour. To illustrate a range of possible outcomes, alternative projection series for national, state/territory and capital city/rest of state areas, using different combinations of fertility, mortality, overseas and internal migration assumptions, are prepared. Alternative series are published in Population Projections, Australia, 2022 (base) to 2071. Only one series of SA2-level projections was prepared for this product. Population projections can take account of planning and other decisions by governments known at the time the projections were derived, including sub-state projections published by each state and territory government. The ABS generally does not have access to the policies or decisions of commonwealth, state and local governments and businesses that assist in accurately forecasting small area populations. Migration, especially internal migration, accounts for the majority of projected population change for most SA2s. Volatile and unpredictable small area migration trends, especially in the short-term, can have a significant effect on longer-term projection results. Care therefore should be taken with SA2s with small total populations and very small age-sex cells, especially at older ages. While these projections are calculated at the single year of age level, small numbers, and fluctuations across individual ages in the base population and projection assumptions limit the reliability of SA2-level projections at single year of age level. These fluctuations reduce and reliability improves when the projection results are aggregated to broader age groups such as the five-year age bands in this product. For areas with small elderly populations, results aggregated to 65 and over are more reliable than for the individual age groups above 65. With the exception of areas with high planned population growth, SA2s with a base total population of less than 500 have generally been held constant for the projection period in this product as their populations are too small to be reliably projected at all, however their (small) age/sex distributions may change slightly. These SA2s are listed in the appendix. The base (2022) SA2 population estimates and post-2022 projections by age and sex include small artificial cells, including 1s and 2s. These are the result of a confidentialisation process and forced additivity, to control SA2 and capital city/rest of state age/sex totals, being applied to their original values. SA2s and LGAs in this product are based on the Australian Statistical Geography Standard (ASGS) boundaries as at the 2021 Census (ASGS Edition 3). For further information, see Australian Statistical Geography Standard (ASGS) Edition 3.

Made possible by the Digital Atlas of Australia The Digital Atlas of Australia is a key Australian Government initiative being led by Geoscience Australia, highlighted in the Data and Digital Government Strategy. It brings together trusted datasets from across government in an interactive, secure, and easy-to-use geospatial platform. The Australian Bureau of Statistics (ABS) is working in partnership with Geoscience Australia to establish a set of web services to make ABS data available in the Digital Atlas of Australia.

Contact the Australian Bureau of Statistics If you have questions or feedback about this web service, please email geography@abs.gov.au. To subscribe to updates about ABS web services and geospatial products, please complete this form. For information about how the ABS manages any personal information you provide view the ABS privacy policy.

Data and geography references Source data publication: Population Projections, Australia, 2022 (base)

By the end of 2100, the population of Central and Eastern Europe will amount to 187.07 million, a decrease of 43 percent from 2017. If Russia is excluded from the tally, the CEE population will decrease by more than half. Latvia will lose the most population, nearly 80 percent. Russia, on the other hand, will experience the smallest decline (-27 percent).

Official population projections for: • South Australia and regions for 2016 to 2041 • Local government areas (LGAs) and Statistical Areas level 2 (SA2s) for 2016 to 2036. Users should familiarise themselves with the assumptions, qualifications and background information provided on the DPTI population projections webpage at http://www.dpti.sa.gov.au/planning/population in order to choose the projection that best suits their needs. Updated every 5 years.

Projections of the total population for Queensland statistical areas level 4 (SA4s), SA3s and SA2s, and local government areas.

Sub-provincial population estimates and projections by age and gender for a variety of region types. Customizable breakdowns for counts and additional statistics are available via BC Stats' Population App. Estimates: A population estimate is a measure of the current or historical population. BC Stats annually releases total population estimates for sub-provincial region types. These estimates are consistent in aggregate with the July 1st provincial level estimates produced by Statistics Canada. More information can be found on BC Stats' Population Estimates page. Projections: A population projection is a forecast of future population growth. BC Stats applies the Component/Cohort-Survival method to project the population. This method "grows" the population from the latest base year estimate by forecasting births, deaths and migration by age. These forecasts are based on past trends modified to account for possible future changes and, consequently, should be viewed as only one possible scenario of future population. Projections are also released annually and are as of July 1st. The methodological document, P.E.O.P.L.E. Sub-provincial Population Projections: Methodology and Assumptions, is provided only for reference. More information can be found on BC Stats' Population Projections page. Wondering about the location of a particular region or its boundaries? Check out the Administrative Boundaries page for more information.

Population: Projection: Residents: Central West: Goiás data was reported at 7,740,785.000 Person in Dec 2030. This records an increase from the previous number of 7,735,607.000 Person for Nov 2030. Population: Projection: Residents: Central West: Goiás data is updated monthly, averaging 6,606,921.000 Person from Jan 2000 (Median) to Dec 2030, with 372 observations. The data reached an all-time high of 7,740,785.000 Person in Dec 2030 and a record low of 5,014,220.000 Person in Jan 2000. Population: Projection: Residents: Central West: Goiás data remains active status in CEIC and is reported by Brazilian Institute of Geography and Statistics. The data is categorized under Brazil Premium Database’s Socio and Demographic – Table BR.GAB001: Population: Projection: by Region.

As a part of DVRPC’s long-range planning activities, the Commission is required to maintain forecasts with at least a 20-year horizon. DVRPC has updated forecasts through the horizon year of the 2050 Long-Range Plan. The 2050 Version 2.0 Population and Employment Forecasts (2050 Version 2.0, v2.0) were adopted by the DVRPC Board on October 24, 2024, They update the 2050 v1.0 forecasts with a new county-level age-cohort model and new base data from the 2020 Decennial Census, 2020 Bureau of Economic Analysis (BEA), and 2021 National Establishments Time Series (NETS). The age-cohort model calculates future population for five year age-sex cohorts using the 2020 Census base population, and anticipated birth, death, and migration rates. These anticipated rates were developed using historic birth and death records from New Jersey and Pennsylvania state health department data, as well as historic net migration data, calculated from decennial census data. Employment forecasts were developed by multiplying population forecasts by a ratio of working age population to jobs, calculated from 2022 ACS and BEA data. The municipal and TAZ forecasts use the growth factors from the v1.0 forecasts, scaled to the new county and regional population totals from the age-cohort model. While the forecast is not adopted at the transportation analysis zone (TAZ) level, it is allocated to these zones for use in DVRPC’s travel demand model, and conforms to municipal/district level adopted totals. This data provides TAZ-level population and employment. Other travel model attributes are available upon request. DVRPC has prepared regional- and county-level population and employment forecasts in five-year increments for years 2020–2050. 2019 land use model results are also available. A forthcoming Analytical Data Report will document the forecasting process and methodologies.

Projections estimate that the population in Italy will decrease in the following years. In January 2025, the Italian population added up to 59 million people, but in 2030 Italians will be 58 million individuals. Twenty years later, the population will be around 52 million people. Low birth rate and old population The birth rate in Italy has constantly dropped in the last years. In 2023, 6.4 children were born per 1,000 inhabitants, three babies less than in 2002. Nationwide, the highest number of births was registered in the southern regions, whereas central Italy had the lowest number of children born every 1,000 people. More specifically, the birth rate in the south stood at 7 infants, while in the center it was equal to 5.9 births. Consequently, the population in Italy has aged over the last decade. Between 2002 and 2024, the age distribution of the Italian population showed a growing share of people aged 65 years and older. As a result, the share of young people decreased. The European exception Similarly, the population in Europe is estimated to decrease in the coming years. In 2024, there were 740 million people living in Europe. In 2100, the figure is expected to drop to 586 million inhabitants. However, projections of the world population suggest that Europe might be the only continent experiencing a population decrease. For instance, the population in Africa could grow from 1.41 billion people in 2022 to 3.92 billion individuals in 2100, the fastest population growth worldwide.

Important Dataset Update 6/24/2020:Summit and Wasatch Counties updated.Important Dataset Update 6/12/2020:MAG area updated.Important Dataset Update 7/15/2019: This dataset now includes projections for all populated statewide traffic analysis zones (TAZs). Projections within the Wasatch Front urban area ( SUBAREAID = 1) were produced with using the Real Estate Market Model as described below. Socioeconomic forecasts produced for Cache MPO (Cache County, SUBAREAID = 2), Dixie MPO (Washington County, SUBAREAID = 3), Summit County (SUBAREAID = 4), and UDOT (other areas of the state, SUBAREAID = 0) all adhere to the University of Utah Gardner Policy Institute's county-level projection controls, but other modeling methods are used to arrive at the TAZ-level forecasts for these areas.As with any dataset that presents projections into the future, it is important to have a full understanding of the data before using it. Before using this data, you are strongly encouraged to read the metadata description below and direct any questions or feedback about this data to analytics@wfrc.org. Every four years, the Wasatch Front’s two metropolitan planning organizations (MPOs), Wasatch Front Regional Council (WFRC) and Mountainland Association of Governments (MAG), collaborate to update a set of annual small area -- traffic analysis zone and ‘city area’, see descriptions below) -- population and employment projections for the Salt Lake City-West Valley City (WFRC), Ogden-Layton (WFRC), and Provo-Orem (MAG) urbanized areas. These projections are primarily developed for the purpose of informing long-range transportation infrastructure and services planning done as part of the 4 year Regional Transportation Plan update cycle, as well as Utah’s Unified Transportation Plan, 2019-2050. Accordingly, the foundation for these projections is largely data describing existing conditions for a 2015 base year, the first year of the latest RTP process. The projections are included in the official travel models, which are publicly released at the conclusion of the RTP process. As these projections may be a valuable input to other analyses, this dataset is made available at http://data.wfrc.org/search?q=projections as a public service for informational purposes only. It is solely the responsibility of the end user to determine the appropriate use of this dataset for other purposes. Wasatch Front Real Estate Market Model (REMM) ProjectionsWFRC and MAG have developed a spatial statistical model using the UrbanSim modeling platform to assist in producing these annual projections. This model is called the Real Estate Market Model, or REMM for short. REMM is used for the urban portion of Weber, Davis, Salt Lake, and Utah counties. REMM relies on extensive inputs to simulate future development activity across the greater urbanized region. Key inputs to REMM include:Demographic data from the decennial census;County-level population and employment projections -- used as REMM control totals -- are produced by the University of Utah’s Kem C. Gardner Policy Institute (GPI) funded by the Utah State Legislature;Current employment locational patterns derived from the Utah Department of Workforce Services; Land use visioning exercises and feedback, especially in regard to planned urban and local center development, with city and county elected officials and staff;Current land use and valuation GIS-based parcel data stewarded by County Assessors;Traffic patterns and transit service from the regional Travel Demand Model that together form the landscape of regional accessibility to workplaces and other destinations; andCalibration of model variables to balance the fit of current conditions and dynamics at the county and regional level.‘Traffic Analysis Zone’ ProjectionsThe annual projections are forecasted for each of the Wasatch Front’s 2,800+ Traffic Analysis Zone (TAZ) geographic units. TAZ boundaries are set along roads, streams, and other physical features and average about 600 acres (0.94 square miles). TAZ sizes vary, with some TAZs in the densest areas representing only a single city block (25 acres). ‘City Area’ ProjectionsThe TAZ-level output from the model is also available for ‘city areas’ that sum the projections for the TAZ geographies that roughly align with each city’s current boundary. As TAZs do not align perfectly with current city boundaries, the ‘city area’ summaries are not projections specific to a current or future city boundary, but the ‘city area’ summaries may be suitable surrogates or starting points upon which to base city-specific projections.Summary Variables in the DatasetsAnnual projection counts are available for the following variables (please read Key Exclusions note below):DemographicsHousehold Population Count (excludes persons living in group quarters)Household Count (excludes group quarters)EmploymentTypical Job Count (includes job types that exhibit typical commuting and other travel/vehicle use patterns)Retail Job Count (retail, food service, hotels, etc)Office Job Count (office, health care, government, education, etc)Industrial Job Count (manufacturing, wholesale, transport, etc)Non-Typical Job Count* (includes agriculture, construction, mining, and home-based jobs) This can be calculated by subtracting Typical Job Count from All Employment Count.All Employment Count* (all jobs, this sums jobs from typical and non-typical sectors).* These variable includes REMM’s attempt to estimate construction jobs in areas that experience new and re-development activity. Areas may see short-term fluctuations in Non-Typical and All Employment counts due to the temporary location of construction jobs.Population and employment projections for the Wasatch Front area can be combined with those developed by Dixie MPO (St. George area), Cache MPO (Logan area), and the Utah Department of Transportation (for the remainder of the state) into one database for use in the Utah Statewide Travel Model (USTM). While projections for the areas outside of the Wasatch Front use different forecasting methods, they contain the same summary-level population and employment projections making similar TAZ and ‘City Area’ data available statewide. WFRC plans, in the near future, to add additional areas to these projections datasets by including the projections from the USTM model.Key Exclusions from TAZ and ‘City Area’ ProjectionsAs the primary purpose for the development of these population and employment projections is to model future travel in the region, REMM-based projections do not include population or households that reside in group quarters (prisons, senior centers, dormitories, etc), as residents of these facilities typically have a very low impact on regional travel. USTM-based projections also excludes group quarter populations. Group quarters population estimates are available at the county-level from GPI and at various sub-county geographies from the Census Bureau.

Population: Projection: Residents: North: Pará data was reported at 9,335,730.000 Person in Dec 2030. This records an increase from the previous number of 9,331,528.000 Person for Nov 2030. Population: Projection: Residents: North: Pará data is updated monthly, averaging 8,165,438.000 Person from Jan 2000 (Median) to Dec 2030, with 372 observations. The data reached an all-time high of 9,335,730.000 Person in Dec 2030 and a record low of 6,307,018.000 Person in Jan 2000. Population: Projection: Residents: North: Pará data remains active status in CEIC and is reported by Brazilian Institute of Geography and Statistics. The data is categorized under Brazil Premium Database’s Socio and Demographic – Table BR.GAB001: Population: Projection: by Region.

Population: Projection: Residents: South: Paraná data was reported at 12,063,635.000 Person in Dec 2030. This records an increase from the previous number of 12,060,792.000 Person for Nov 2030. Population: Projection: Residents: South: Paraná data is updated monthly, averaging 11,164,249.000 Person from Jan 2000 (Median) to Dec 2030, with 372 observations. The data reached an all-time high of 12,063,635.000 Person in Dec 2030 and a record low of 9,613,794.000 Person in Jan 2000. Population: Projection: Residents: South: Paraná data remains active status in CEIC and is reported by Brazilian Institute of Geography and Statistics. The data is categorized under Brazil Premium Database’s Socio and Demographic – Table BR.GAB001: Population: Projection: by Region.

NOTE FOR USERS: For local-level projections, such as at a township and municipal-level, please use the original “2018 Series”. This is the data CMAP recommends be used for planning, grant applications, and other official purposes. CMAP is confident in the updated regional-level population projections; however, the projections for township and municipal level populations appear less reflective of current trends in nearterm population growth. Further refinements of the local forecasts are likely needed.CONTENTS:Filename: ONTO2050OriginalForecastData2018.zipTitle: Socioeconomic Forecast Data, 2018 SeriesThis .zip file contains data associated with the original ON TO 2050 forecast, adopted in October 2018. Includes:Excel file of regional projections of population and employment to the year 2050:CMAP_RegionalReferenceForecast_2015adj.xlsx (94kb)Excel file of local (county, municipality, Chicago community area) projections of household population and employment to the year 2050: ONTO2050LAAresults20181010.xlsx (291kb)GIS shapefile of projected local area allocations to the year 2050 by Local Allocation Zone (LAZ): CMAP_ONTO2050_ForecastByLAZ_20181010.shp (19.7mb)Filename: ONTO2050OriginalForecastDocumentation2018.zipTitle: Socioeconomic Forecast Documentation, 2018 SeriesThis .zip file contains PDF documentation of the original ON TO 2050 forecast, adopted in October 2018. Includes:Louis Berger forecast technical report (2016): CMAPSocioeconomicForecastFinal-Report04Nov2016.pdf (2.3mb)Louis Berger addendum (2017): CMAPSocioeconomicForecastRevisionAddendum20Jun2017.pdf (0.6mb)ON TO 2050 Forecast appendix (2018): ONTO2050appendixSocioeconomicForecast10Oct2018.pdf (2.6mb)Filename: Socioeconomic-Forecast-Appendix-Final-October-2022.pdfTitle: Socioeconomic Forecast Appendix, 2022 SeriesDocumentation & results for the updated socioeconomic forecast accompanying the ON TO 2050 plan update, adopted October 2022. PDF, 2.7mbFilename: RegionalDemographicForecast_TechnicalReport_202210.pdfTitle: 2050 Regional Demographic Forecast Technical Report, 2022 SeriesSummary of methodology and results for the ON TO 2050 plan update regional demographic forecast, developed in coordination with the Applied Population Lab at the University of Wisconsin, Madison. PDF, 1.7mbFilename: RegionalEmpForecast_TechnicalReport_202112.pdfTitle: 2050 Regional Employment Forecast Technical Report, 2022 SeriesSummary of methodology and results for the ON TO 2050 plan update regional employment forecast, developed by EBP and Moody's Analytics. PDF, 0.8mbFilename: CMAPRegionalForecastONTO2050update202209.xlsxTitle: Regional Projections, 2022 SeriesProjections of population and employment to the year 2050, produced for the ON TO 2050 plan update adopted October 2022. 60kbFilename: CMAPLocalForecastONTO2050update202210.xlsxTitle: County and Municipal Projections, October 2022 (2022 Series)Projections of population and employment to the year 2050 at the county and municipal level, produced for the ON TO 2050 plan update adopted October 2022.