No Description Was Provided. Link Function: 375-- download.

This resources is metadata for Aeroradioactivity and Generalized Geologic Maps of Parts of New York, Connecticut, Rhode Island and Massachusetts, USGS GP-359, 1:250000 scale. Airborne near surface gross gamma mapping, includes geologic discussion and explanatory text. Documents are US Geological Survey maps. The data are available in the following formats: web map service, ESRI service and a zipped folder with TIFF and TFW files of the maps.The data was provided by the Connecticut Geological Survey, Department of Energy and Environmental Protection, and made available for distribution through the National Geothermal Data System.

This map includes shoreline change data for the state of Massachusetts hosted by the Massachusetts Office of Coastal Zone Management.The active data layer in this map is Massachusetts Shoreline Change Transect (1970-2014) with short-term shoreline change rates. To view long-term rates, open map in Map Viewer to turn on layer.The Massachusetts Office of Coastal Zone Management launched the Shoreline Change Project in 1989 to identify erosion-prone areas of the coast. The shoreline position and change rate are used to inform management decisions regarding the erosion of coastal resources. In 2001, a shoreline from 1994 was added to calculate both long- and short-term shoreline change rates along ocean-facing sections of the Massachusetts coast. In 2013, two oceanfront shorelines for Massachusetts were added using 2008-9 color aerial orthoimagery and 2007 topographic lidar datasets obtained from the National Oceanic and Atmospheric Administration's Ocean Service, Coastal Services Center. In 2018 two new mean high water (MHW) shorelines for Massachusetts were extracted from lidar collected between 2010 and 2014 (described below). 2018 addition shoreline 1The North Shore and South Coast uses 2010 lidar data collected by the U.S. Army Corps of Engineers (USACE) Joint Airborne Lidar Bathymetry Technical Center of Expertise. The South Shore and Outer Cape uses 2011 lidar data collected by the U.S. Geological Survey's (USGS) National Geospatial Program Office. Nantucket and Martha’s Vineyard uses 2012 lidar data collected by the USACE (post Sandy)from a 2012 USACE Post Sandy Topographic lidar survey. 2018 addition shoreline 2The North Shore, Boston, South Shore, Cape Cod Bay, Outer Cape, South Cape, Nantucket, Martha’s Vineyard, and the South Coast (around Buzzards Bay to the Rhode Island Border) is from 2013-14 lidar data collected by the (USGS) Coastal and Marine Geology Program. This 2018 update of the rate of shoreline change in Massachusetts includes two types of rates. Some of the rates include a proxy-datum bias correction, this is indicated in the filename with “PDB”. The rates that do not account for this correction have “NB” in their file names. The proxy-datum bias is applied because in some areas a proxy shoreline (like a High Water Line shoreline) has a bias when compared to a datum shoreline (like a Mean High Water shoreline). In areas where it exists, this bias should be accounted for when calculating rates using a mix of proxy and datum shorelines. This issue is explained further in Ruggiero and List (2009) and in the process steps of the metadata associated with the rates. This release includes both long-term (~150 years) and short term (~30 years) rates. Files associated with the long-term rates have “LT” in their names, files associated with short-term rates have “ST” in their names.

no abstract provided

This data set contains the 1995-era and 2000-era classifications of US Coast zone 65 and can be used to analyze change. This imagery was collected as part of the Multi-Resolution Land Characteristics program in a multi- agency effort to provide baseline multi-scale environmental characteristics and to monitor environmental change. This data set utilized 41 full or partial Landsat 5 and 7 scenes which were analyzed according to the Coastal Change Analysis Program (C-CAP) protocol to determine land cover. Note: These data were reprojected from their native projection into North American Datum 1983 (NAD83) / Massachusetts State Plane coordinate system, Mainland Zone (Fipszone 2001) meters by the Massachusetts Office of Coastal Zone Management on Oct. 12, 2006. All data classified as unchanged (e.g. Deciduous Forest 1996 to Deciduous Forest 2001) were grouped and converted to No Data.

Initializing forest landscape models (FLMs) to simulate changes in tree species composition requires accurate fine-scale forest attribute information mapped contiguously over large areas. Nearest-neighbor imputation maps have high potential for use as the initial condition within FLMs, but the tendency for field plots to be imputed over large geographical distances results in species frequently mapped outside of their home ranges, which is problematic. We developed an approach for evaluating and selecting field plots for imputation based on their similarity in feature-space, their species composition, and their geographical distance between source and imputation to produce a map that is appropriate for initializing an FLM. We applied this approach to map 13m ha of forest throughout the six New England states (Rhode Island, Connecticut, Massachusetts, New Hampshire, Vermont, and Maine). The map itself is a .img raster file of FIA plot CN numbers. To access FIA data from this map, one has to link the mapcodes in this map to FIA data supplied by USDA FIA database (https://apps.fs.usda.gov/fia/datamart/datamart.html). Due to plot confidentiality and integrity concerns, pixels containing FIA plots were always assigned to some other plot than the actual one found there.

I. SNEP HRU Project Background The Southeast New England Program (SNEP) region consists of watersheds in Massachusetts and Rhode Island that primarily drain into Narragansett Bay, Buzzards Bay, or Nantucket Sound. It encompasses all or portions of 134 municipalities many of which are highly developed. The region faces multiple water quality issues with stormwater being previously identified a major contributor. These maps have been generated for all 134 Municipalities including 81 subwatersheds in the SNEP region to provide organizations and municipalities a way to understand where significant stormwater pollution may be originating. For organizations or municipalities with GIS capabilities the data that created these maps is available as well. II. What are HRUs? Hydrologic Response Units (HRUs) describe a landscape through unique combinations of land use and land cover (residential, commercial, forest, etc.), soil types (A, B, C, D), and additional characteristics such as slope, and impervious cover. These landscape characteristics, or HRUs, provide the building block to quantify stormwater pollutant loads (nitrogen, phosphorus, and total suspended solids (TSS)) originating from a given land area. The HRUs and nutrient pollutant loads in stormwater provides a baseline from which reduction targets can be created. III. How can HRUs be used? These maps and their underlying data can provide critical information to municipalities, watershed organizations, EPA, and others to assess stormwater pollutant loads in SNEP watersheds. EPA expects that this information will facilitate further understanding of the distribution of stormwater pollutant load source areas throughout the watersheds. This information serves to advance a broader understanding of stormwater impacts and potential management options by the public and direct stakeholders. Consistent HRUs may help municipalities implement MS4 permitting requirements and facilitate stormwater management strategies, such as land use conversion, stormwater Control Measure (SCM) siting, and targeting areas for conservation. HRU mapping can identify best locations for SCMs and can be utilized with additional stormwater planning tools (such as EPA’s Opti-Tool) to develop a cost-effective stormwater management plan. By providing a consistent HRU map for the SNEP region, practitioners can focus their efforts on implementation of SCM strategies rather than mapping their landscape. Hotspot mapping is a tool that integrates the HRU analysis and stormwater runoff pollutant load outputs to indicate areas where pollutant loads are highest and areas that stormwater controls may be best implemented. The HRUs and pollutant loads can be overlayed with parcel analysis to determine which parcels have high loads/areas of large impervious cover. The parcel data can help towns prioritize their efforts by determining the properties with highest potential to reduce pollutant loads through stormwater controls. Similarly, it can help determine which properties have large stormwater pollutant loads. IV. Other Resources HRUs That have been completed by EPA - Taunton River Watershed FDC Project and Tisbury, MA IC Disconnection Project The Cape Cod Commission developed HRUs for Barnstable County (CCC: Barnstable County HRUs). The UNH Stormwater Center developed parcel level hotspot mapping in New Hampshire for municipalities to prioritize where new BMPs should be placed (UNHSC: NH Hotspot Mapping).

no abstract provided

This hosted feature layer has been published in RI State Plane Feet NAD83.This is a statewide, seamless digital dataset of the land cover/land use for the State of Rhode Island derived using semi-automated methods and based on imagery captured in 2003-2004. The project area encompasses the State of Rhode Island and also extends 1/2 mile into the neighboring states of Connecticut and Massachusetts or to the limits of source orthophotography. Geographic feature accuracy meets the National Mapping Standards for 1:5000 scale mapping with respect to base level data (roads, hydrography, and orthos). The minimum mapping unit for this dataset is .5 acre. The land use classification scheme used for these data was based on the Anderson Level III modified coding schema used in previous land use datasets in Rhode Island (1988 & 1995) with some modifications for the 2003 classification.The dataset is also intended to be incorporated into the Rhode Island Geographic Information System database for use by federal, state and local government and made available to the general public under established RIGIS licensing procedures.This hosted feature service layer replaces the map service https://maps.edc.uri.edu/arcgis/rest/services/Atlas_PLAN/Land_Use_and_Land_Cover_0304/MapServer/0

This hosted feature layer has been published in RI State Plane Feet NAD83This is a statewide digital dataset of land cover/land use for the State of Rhode Island that combines forestry data from several existing datasets, incorporates a recently prepared shrubland dataset, and includes a manual update of some categories. The dataset covers the entire state of Rhode Island and extends approximately 1/2 mile into the neighboring states of Connecticut and Massachusetts.

The 2010 Forest Habitat Map for Rhode Island was created to provide forest owners with a simple tool to analyze and map forest habitats at the scales of 1:5000 or more using licensed or free mapping GIS software.

These ESI data were collected, mapped, and digitized to provide environmental data for oil spill planning and response. The Clean Water Act with amendments by the Oil Pollution Act of 1990 requires response plans for immediate and effective protection of sensitive resources. The ESI data include information for three main components: shoreline habitats, sensitive biological resources, and human-use resources. ESI MAPS SHOULD NOT BE USED FOR NAVIGATIONAL PURPOSES. Source data used in the development of these regional atlases range from 1900 to 2005 with much of the data dated from the 1980s, 1990s, to 2005. Source data dates are extensively documented in the included metadata and include the following DE_NJ_PA, data range 1969-1995, compiled 1995, HudsonRiver data range 1942-2005, compiled 2005, Massachusetts data range 1978-1998, compiled 1998, New Hampshire data range 1948-2003, compiled 2003, and RI_CT_NY_NJ data range 1900-2001, compiled 1999.

This atlas update adds data formats to those originally released to accommodate new technologies of digital mapping. The underlying data have not been updated since the atlas publication dates shown. Each ESI atlas listed is provided in a variety of GIS formats, including a personal Geodatabase for use with the ESRI ArcGIS product line. An .mxd file, created in ArcMap 9.3 is also included. This mapping document provides links to all of the data tables and symbolization of the layers using the standardized ESI colors and hatch patterns. Layer files are also supplied. These, together with the associated geodatabase, can be used in other mapping projects to define the symbology and links established in the original ESI .mxd file.

PDF files of the map pages are also included. These PDFS now have the seasonality pages attached to the appropriate map document. This should make it easier to print and distribute individual maps and insure that the supporting information is always included. The GIS data are also provided in ARC Export .e00 format, as shape files with an ArcView 3.x project and in MOSS format. Database files are included in text and .e00 format. Each area directory contains a readme file which shows the area of coverage and gives a bit more description of the various file formats included.

Geotiff image of the Bristol map. Includes collar information

This hosted feature layer has been published in RI State Plane Feet NAD 83.A statewide, seamless, vector-formatted geospatial dataset depicting 2020 land use and land cover ground conditions. The product was developed by comparing high resolution 2020 and 2011 leaf-off aerial orthoimagery and employing both automated and manual processes to detect, delineate and photointerpret changes since 2011. The project area encompasses the State of Rhode Island and also extends 1/2 mile into the neighboring states of Connecticut and Massachusetts, or to the limits of the source orthoimagery. The minimum mapping unit for this dataset is 0.5 acre.The classification scheme is based on the same RI-modified Anderson Level III scheme used in previous classifications (1988, 1995, 2003/2004, and 2011) with the addition of two new classes (148) Ground-mounted Solar Energy Systems and (149) Wind Energy Systems. If data are used for change detection using the 2003/2004 edition be aware that marinas were coded from other transportation and developed recreation to commercial in the 2020 data to more accurately fit the classification system. The RI classification is based upon Anderson Level III coding described in the United States Geological Survey Publication: "A Land Use And Land Cover Classification System for Use With Remote Sensor Data, Geological Survey Professional Paper 964" Available Online at: https://landcover.usgs.gov/pdf/anderson.pdfPlease consider the source, spatial accuracy, attribute accuracy, and scale of these data before incorporating them into your project. These data were derived from both automated and manual photointerpretation processes and should be used for planning purposes only. The wetland areas contained in this dataset do not include all wetlands previously identified in other RIGIS land use and land cover datasets or in other separate GIS wetland datasets and interpretation of wetland areas should lean toward the side of caution. Wetland areas previously classified as forested wetlands are shown as forested areas in this dataset. Statistical comparisons with RIGIS land use and land cover data prior to 2003 should be treated with caution since some differences in the methodologies used to delineate features were employed

This map is designed for use in ArcGIS Navigator and contains data for the U.S. Northeast Region supporting map display, geocoding and routing. The U.S. Northeast Region includes Connecticut, Maine, Massachusetts, New Hampshire, New Jersey, New York, Pennsylvania, Rhode Island, and Vermont.
The data is from ArcGIS StreetMap Premium North America 2025 Release 1 (based on TomTom 2024.12 vintage).

Note: Only the latest version of the map is available for download. See the 
Navigator map coverage 
and click on the map to access details (including file size, updated date, and data source).

Debris flows, debris avalanches, mud flows and lahars are fast-moving landslides that occur in a wide variety of environments throughout the world. They are particularly dangerous to life and property because they move quickly, destroy objects in their paths, and can strike with little warning. The purpose of this map is to show where debris flows have occurred in the conterminous United States and where these slope movements might be expected in the future.

Adobe PDF of the Quaternary Geologic Map of the Bristol Quadranglerangle, Rhode Island

This ArcGIS Map Package contains information on brook trout occupancy in the southern portion of the brook trout range (PA and south). Fish sample data from a number of state and federal agencies/organizations were used to define patches for brook trout as groups of occupied contiguous catchment polygons from the National Hydrography Dataset Plus Version 1 (NHDPlusV1) catchment GIS layer. After defining patches, NHDPlusV1 catchments were assigned occupancy codes. Then state and federal agencies reviewed patches and codes to verify data accuracy. A similar effort is currently being conducted by the Eastern Brook Trout Joint Venture to develop occupancy data for the remainder of the brook trout range including states of New York, Maine, New Hampshire, Connecticut, Vermont, Massachusetts, Rhode Island, and Ohio. This ArcGIS Map Package contains data for the entire southern portion of the brook trout range with preset symbology that displays brook trout occupancy. The Map Package also includes the same information clipped into seperate layers for each state. State information is provided for the convenience of users that are interested in data for only a particular state. Additional layers displaying state boundaries, quadrangle maps, and the brook trout range are also included as spatial references.

This Coastal Barrier Resources System (CBRS) data set, produced by the U.S. Fish and Wildlife Service (Service), contains areas designated as undeveloped coastal barriers in accordance with the Coastal Barrier Resources Act (CBRA), 16 U.S.C. 3501 et seq., as amended. The boundaries used to create the polygons herein were compiled between 12/6/2013 and 12/16/2016 from the official John H. Chafee Coastal Barrier Resources System CBRS maps. The boundaries of the CBRS Units in Connecticut, Massachusetts, Rhode Island, and the Long Island portion of New York, were digitized from the official paper maps according to the guidelines in a notice published in the Federal Register on August 29, 2013 (see the â Georeferencing and Boundary Interpretationâ and â Boundary Transcriptionâ sections of 78 FR 53467; available at https://www.federalregister.gov/d/2013-21167). In all other cases where the official map was created through digital methods, the digital boundary was used. These digital polygons are only representations of the CBRS boundaries shown on the official CBRS maps and are not to be considered authoritative. The Service is not responsible for any misuse or misinterpretation of this digital data set, including use of the data to determine eligibility for federal financial assistance such as federal flood insurance. CBRS maps are either enacted by Congress or adopted administratively by the Secretary of the Interior (Secretary), and are maintained by the Service. As maps are revised, this data set will be updated with the new boundaries. Copies of the official CBRS maps are available for viewing at Serviceâ s Headquarters office and are also available to view or download at https://www.fws.gov/ecological-services/habitat-conservation/cbra/Maps/index.html. CBRS boundaries viewed using the CBRS Mapper or the shapefile are subject to misrepresentations beyond the Serviceâ s control, including misalignments of the boundaries with third party base layers and misprojections of spatial data. The official CBRS map is the controlling document and should be consulted for all official determinations. Official determinations are recommended for all properties that are in close proximity (within 20 feet) of a CBRS boundary. For an official determination of whether or not an area or specific property is located within the CBRS, please follow the procedures found at https://www.fws.gov/ecological-services/habitat-conservation/cbra/Determinations.html. For any questions regarding the CBRS, please contact your local Service field office or email CBRA@fws.gov. Contact information for Service field offices can be found at http://www.fws.gov/offices.

This storymap visualizes data from Piping Plovers that were tagged at nesting areas in southern New England and tracked during fall migration using the Motus network (www.motus.org). The storymap is available at the following link: https://storymaps.arcgis.com/stories/5bab01fc5fa445f58ee54c062b4d2f3dExplore the map below to see how Piping Plovers take flight and make their away across the Atlantic--sometimes flying as fast as 80 km an hour. For migrating plovers, wind and weather conditions play an important role in their flight departures; and stopover sites in the Mid-Atlantic provide critical habitat for rest and refueling. Here in this map, you can look at how nano-tagged Piping Plovers from Rhode Island and Massachusetts timed their migration flights with wind conditions.The storymap is available at the following link: https://storymaps.arcgis.com/stories/5bab01fc5fa445f58ee54c062b4d2f3dStory Map Created by Alex Cook, USFWS Directorate Fellowship Program 2020 Cohort

Debris flows, debris avalanches, mud flows and lahars are fast-moving landslides that occur in a wide variety of environments throughout the world. They are particularly dangerous to life and property because they move quickly, destroy objects in their paths, and can strike with little warning. The purpose of this map is to show where debris flows have occurred in the conterminous United States and where these slope movements might be expected in the future.