View the diversity of challenges and opportunities across America's counties within different types of rural regions and communities. Get statistics on people, jobs, and agriculture.

The urban–rural continuum classifies the global population, allocating rural populations around differently-sized cities. The classification is based on four dimensions: population distribution, population density, urban center location, and travel time to urban centers, all of which can be mapped globally and consistently and then aggregated as administrative unit statistics.Using spatial data, we matched all rural locations to their urban center of reference based on the time needed to reach these urban centers. A hierarchy of urban centers by population size (largest to smallest) is used to determine which center is the point of “reference” for a given rural location: proximity to a larger center “dominates” over a smaller one in the same travel time category. This was done for 7 urban categories and then aggregated, for presentation purposes, into “large cities” (over 1 million people), “intermediate cities” (250,000 –1 million), and “small cities and towns” (20,000–250,000).Finally, to reflect the diversity of population density across the urban–rural continuum, we distinguished between high-density rural areas with over 1,500 inhabitants per km2 and lower density areas. Unlike traditional functional area approaches, our approach does not define urban catchment areas by using thresholds, such as proportion of people commuting; instead, these emerge endogenously from our urban hierarchy and by calculating the shortest travel time.Urban-Rural Catchment Areas (URCA).tif is a raster dataset of the 30 urban–rural continuum categories for the urban–rural continuum showing the catchment areas around cities and towns of different sizes. Each rural pixel is assigned to one defined travel time category: less than one hour, one to two hours, and two to three hours travel time to one of seven urban agglomeration sizes. The agglomerations range from large cities with i) populations greater than 5 million and ii) between 1 to 5 million; intermediate cities with iii) 500,000 to 1 million and iv) 250,000 to 500,000 inhabitants; small cities with populations v) between 100,000 and 250,000 and vi) between 50,000 and 100,000; and vii) towns of between 20,000 and 50,000 people. The remaining pixels that are more than 3 hours away from any urban agglomeration of at least 20,000 people are considered as either hinterland or dispersed towns being that they are not gravitating around any urban agglomeration. The raster also allows for visualizing a simplified continuum created by grouping the seven urban agglomerations into 4 categories.Urban-Rural Catchment Areas (URCA).tif is in GeoTIFF format, band interleaved with LZW compression, suitable for use in Geographic Information Systems and statistical packages. The data type is byte, with pixel values ranging from 1 to 30. The no data value is 128. It has a spatial resolution of 30 arc seconds, which is approximately 1km at the equator. The spatial reference system (projection) is EPSG:4326 - WGS84 - Geographic Coordinate System (lat/long). The geographic extent is 83.6N - 60S / 180E - 180W. The same tif file is also available as an ESRI ArcMap MapPackage Urban-Rural Catchment Areas.mpkFurther details are in the ReadMe_data_description.docx

In 2023, there were approximately ***** million people living in rural areas in the United States, while about ****** million people were living in urban areas. Within the provided time period, the number of people living in urban U.S. areas has increased significantly since totaling only ****** million in 1960.

Derived from King County comprehensive plan data. The rural towns allow urban land uses in the rural area. They are historic communities that were not incorporated, and subsequent to the Washington State GMA, and the adoption of the King County Urban Growth Boundary, are not eligable to be incorporated.

The 2013 Rural-Urban Continuum Codes form a classification scheme that distinguishes metropolitan counties by the population size of their metro area, and nonmetropolitan counties by degree of urbanization and adjacency to a metro area. The official Office of Management and Budget (OMB) metro and nonmetro categories have been subdivided into three metro and six nonmetro categories. Each county in the U.S. is assigned one of the 9 codes. This scheme allows researchers to break county data into finer residential groups, beyond metro and nonmetro, particularly for the analysis of trends in nonmetro areas that are related to population density and metro influence. The Rural-Urban Continuum Codes were originally developed in 1974. They have been updated each decennial since (1983, 1993, 2003, 2013), and slightly revised in 1988. Note that the 2013 Rural-Urban Continuum Codes are not directly comparable with the codes prior to 2000 because of the new methodology used in developing the 2000 metropolitan areas. See the Documentation for details and a map of the codes. An update of the Rural-Urban Continuum Codes is planned for mid-2023.

This map's colors indicate which population is larger in each area: urban (green) or rural (yellow). The map's layers contain total population counts by sex, age, and race groups for Nation, State Legislative Districts Upper, State Legislative Districts Lower, Congressional District in the United States and Puerto Rico.The U.S. Census designates each census block as part of an urban area or as rural. Larger geographies in this map such as block group, tract, county and state can therefore have a mix of urban and rural population. This map illustrates the 100% urban areas in dark green, and 100% rural areas in dark yellow. Areas with mixed urban/rural population have softer shades of green or yellow, to give a visual indication of where change may be happening. From the Census:"The Census Bureau’s urban-rural classification is a delineation of geographic areas, identifying both individual urban areas and the rural area of the nation. The Census Bureau’s urban areas represent densely developed territory, and encompass residential, commercial, and other non-residential urban land uses. The Census Bureau delineates urban areas after each decennial census by applying specified criteria to decennial census and other data. Rural encompasses all population, housing, and territory not included within an urban area.For the 2020 Census, an urban area will comprise a densely settled core of census blocks that meet minimum housing unit density and/or population density requirements. This includes adjacent territory containing non-residential urban land uses. To qualify as an urban area, the territory identified according to criteria must encompass at least 2,000 housing units or have a population of at least 5,000." SourceAbout the dataYou can use this map as is and you can also modify it to use other attributes included in its layers. This map's layers contain total population counts by sex, age, and race groups data from the 2020 Census Demographic and Housing Characteristics. This is shown by Nation, State, County, Census Tract, Block Group boundaries. Each geography layer contains a common set of Census counts based on available attributes from the U.S. Census Bureau. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.Vintage of boundaries and attributes: 2020 Demographic and Housing Characteristics Table(s): P1, H1, H3, P2, P3, P5, P12, P13, P17, PCT12 (Not all lines of these DHC tables are available in this feature layer.)Data downloaded from: U.S. Census Bureau’s data.census.gov siteDate the Data was Downloaded: May 25, 2023Geography Levels included: Nation, State, County, Census Tract, Block GroupNational Figures: included in Nation layer The United States Census Bureau Demographic and Housing Characteristics: 2020 Census Results 2020 Census Data Quality Geography & 2020 Census Technical Documentation Data Table Guide: includes the final list of tables, lowest level of geography by table and table shells for the Demographic Profile and Demographic and Housing Characteristics.News & Updates This map is ready to be used in ArcGIS Pro, ArcGIS Online and its configurable apps, Story Maps, dashboards, Notebooks, Python, custom apps, and mobile apps. Data can also be exported for offline workflows. Please cite the U.S. Census Bureau when using this data. Data Processing Notes: These 2020 Census boundaries come from the US Census TIGER geodatabases. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For Census tracts and block groups, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract and block group boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2020 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are unchanged and available as attributes within the data table (units are square meters).  The layer contains all US states, Washington D.C., and Puerto Rico. Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Block groups that fall within the same criteria (Block Group denoted as 0 with no area land) have also been removed.Percentages and derived counts, are calculated values (that can be identified by the "_calc_" stub in the field name). Field alias names were created based on the Table Shells file available from the Data Table Guide for the Demographic Profile and Demographic and Housing Characteristics. Not all lines of all tables listed above are included in this layer. Duplicative counts were dropped. For example, P0030001 was dropped, as it is duplicative of P0010001.To protect the privacy and confidentiality of respondents, their data has been protected using differential privacy techniques by the U.S. Census Bureau.

Over the past three decades, the share of the global population living in rural areas has decreased continuously. Since 2007, less than **** of the world's population lived in rural areas, a share that had dropped to ***** percent as of 2023. The urbanization is expected to continue over the coming decades.

Refer to the current geographies boundaries table for a list of all current geographies and recent updates.

This dataset is the definitive version of the annually released urban rural (UR) boundaries as at 1 January 2025 as defined by Stats NZ, clipped to the coastline. This clipped version has been created for cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 689 UR areas, including 195 urban areas and 402 rural settlements.

Urban rural (UR) is an output geography that classifies New Zealand into areas that share common urban or rural characteristics and is used to disseminate a broad range of Stats NZ’s social, demographic and economic statistics.

The UR separately identifies urban areas, rural settlements, other rural areas, and water areas. Urban areas and rural settlements are form-based geographies delineated by the inspection of aerial imagery, local government land designations on district plan maps, address registers, property title data, and any other available information. However, because the underlying meshblock pattern is used to define the geographies, boundaries may not align exactly with local government land designations or what can be seen in aerial images. Other rural areas, and bodies of water represent areas not included within an urban area.

Urban areas are built from the statistical area 2 (SA2) geography, while rural and water areas are built from the statistical area 1 (SA1) geography.

Urban areas

Urban areas are statistically defined areas with no administrative or legal basis. They are characterised by high population density with many built environment features where people and buildings are located close together for residential, cultural, productive, trade and social purposes.

Urban areas are delineated using the following criteria. They:

form a contiguous cluster of one or more SA2s,

contain an estimated resident population of more than 1,000 people and usually have a population density of more than 400 residents or 200 address points per square kilometre,

have a high coverage of built physical structures and artificial landscapes such as:

• residential dwellings and apartments,

• commercial structures, such as factories, office complexes, and shopping centres,

• transport and communication facilities, such as airports, ports and port facilities, railway stations, bus stations and similar transport hubs, and communications infrastructure,

• medical, education, and community facilities,

• tourist attractions and accommodation facilities,

• waste disposal and sewerage facilities,

• cemeteries,

• sports and recreation facilities, such as stadiums, golf courses, racecourses, showgrounds, and fitness centres,

• green spaces, such as community parks, gardens, and reserves,

have strong economic ties where people gather together to work, and for social, cultural, and recreational interaction,

have planned development within the next 5–8 years.

Urban boundaries are independent of local government and other administrative boundaries. However, the Richmond urban area, which is mainly in the Tasman District, is the only urban area that crosses territorial authority boundaries

Rural areas

Rural areas are classified as rural settlements or other rural.

Rural settlements

Rural settlements are statistically defined areas with no administrative or legal basis. A rural settlement is a cluster of residential dwellings about a place that usually contains at least one community or public building.

Rural settlements are delineated using the following criteria. They:

form a contiguous cluster of one or more SA1s,

contain an estimated resident population of 200–1,000, or at least 40 residential dwellings,

represent a reasonably compact area or have a visible centre of population with a population density of at least 200 residents per square kilometre or 100 address points per square kilometre,

contain at least one community or public building, such as a church, school, or shop.

To reach the target SA2 population size of more than 1,000 residents, rural settlements are usually included with other rural SA1s to form an SA2. In some instances, the settlement and the SA2 have the same name, for example, Kirwee rural settlement is part of the Kirwee SA2.

Some rural settlements whose populations are just under 1,000 are a single SA2. Creating separate SA2s for these rural settlements allows for easy reclassification to urban areas if their populations grow beyond 1,000.

Other rural

Other rural areas are the mainland areas and islands located outside urban areas or rural settlements. Other rural areas include land used for agriculture and forestry, conservation areas, and regional and national parks. Other rural areas are defined by territorial authority.

Water

Bodies of water are classified separately, using the land/water demarcation classification described in the Statistical standard for meshblock. These water areas are not named and are defined by territorial authority or regional council.

The water classes include:

inland water – non-contiguous, defined by territorial authority,

inlets (which also includes tidal areas and harbours) – non-contiguous, defined by territorial authority,

oceanic – non-contiguous, defined by regional council.

To minimise suppression of population data, separate meshblocks have been created for marinas. These meshblocks are attached to adjacent land in the UR geography.

Non-digitised

The following 4 non-digitised UR areas have been aggregated from the 16 non-digitised meshblocks/SA2s.

6901; Oceanic outside region, 6902; Oceanic oil rigs, 6903; Islands outside region, 6904; Ross Dependency outside region.

UR numbering and naming

Each urban area and rural settlement is a single geographic entity with a name and a numeric code.

Other rural areas, inland water areas, and inlets are defined by territorial authority; oceanic areas are defined by regional council; and each have a name and a numeric code.

Urban rural codes have four digits. North Island locations start with a 1, South Island codes start with a 2, oceanic codes start with a 6 and non-digitised codes start with 69.

Urban rural indicator (IUR)

The accompanying urban rural indicator (IUR) classifies the urban, rural, and water areas by type. Urban areas are further classified by the size of their estimated resident population:

• major urban area – 100,000 or more residents,

• large urban area – 30,000–99,999 residents,

• medium urban area – 10,000–29,999 residents,

• small urban area – 1,000–9,999 residents.

This was based on 2018 Census data and 2021 population estimates. Their IUR status (urban area size/rural settlement) may change if the 2025 Census population count moves them up or down a category.

The indicators, by name, with their codes in brackets, are:

urban area – major urban (11), large urban (12), medium urban (13), small urban (14),

rural area – rural settlement (21), rural other (22),

water – inland water (31), inlet (32), oceanic (33).

Clipped Version

This clipped version has been created for cartographic purposes and so does not fully represent the official full extent boundaries.

​

High definition version

This high definition (HD) version is the most detailed geometry, suitable for use in GIS for geometric analysis operations and for the computation of areas, centroids and other metrics. The HD version is aligned to the LINZ cadastre.

​

Macrons

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

​

Digital data

Digital boundary data became freely available on 1 July 2007.

​

Further information

To download geographic classifications in table formats such as CSV please use Ariā

For more information please refer to the Statistical standard for geographic areas 2023.

Contact: geography@stats.govt.nz

Contained within the 3rd Edition (1957) of the Atlas of Canada is a map consisting of two condensed maps showing the distribution of rural population according to the 1951 census of Canada. The term 'rural population' embraces all persons residing outside the census metropolitan areas and cities, towns and villages of 1000 inhabitants and over, whether such cities, towns and villages were incorporated or not. The distribution is shown according to the two divisions of rural population commonly made, namely, rural farm and rural non-farm. The rural farm population comprises all people residing on a farm regardless of occupation. A farm for such purposes is defined as a land holding of over three acres in size on which agricultural operations are carried out, or a land holding from one to three acres in size, which in 1950 accounted for an agricultural production amounting to $250 or more. All other persons classed as rural population come under the rural non-farm division. The northern parts of Yukon Territory and the Northwest Territories are not included on the rural non-farm map although there are some rural non-farm dwellers in these areas. In 1951, Canada's rural population was 52.5% rural farm, and 47.5% rural non-farm.

The rural-urban commuting area codes (RUCA) classify U.S. census tracts using measures of urbanization, population density, and daily commuting from the decennial census. The most recent RUCA codes are based on data from the 2000 decennial census. The classification contains two levels. Whole numbers (1-10) delineate metropolitan, micropolitan, small town, and rural commuting areas based on the size and direction of the primary (largest) commuting flows. These 10 codes are further subdivided to permit stricter or looser delimitation of commuting areas, based on secondary (second largest) commuting flows. The approach errs in the direction of more codes, providing flexibility in combining levels to meet varying definitional needs and preferences. The 1990 codes are similarly defined. However, the Census Bureau's methods of defining urban cores and clusters changed between the two censuses. And, census tracts changed in number and shapes. The 2000 rural-urban commuting codes are not directly comparable with the 1990 codes because of these differences. An update of the Rural-Urban Commuting Area Codes is planned for late 2013.

The Global Rural-Urban Mapping Project, Version 1 (GRUMPv1): Land and Geographic Unit Area Grids measure land areas in square kilometers and the mean Unit size (population-weighted) in square kilometers. The land area grid permits the summation of areas (net of permanent ice and water) at the same resolution as the population density, count, and urban-rural grids. The mean Unit size grids provide a quantitative surface that indicates the size of the input Unit(s) from which population count and density grids are derived. Additional global grids are created from the 30 arc-second grid at 1/4, 1/2, and 1 degree resolutions. This data set is produced by the Columbia University Center for International Earth Science Information Network (CIESIN) in collaboration with the International Food Policy Research Institute (IFPRI), The World Bank, and Centro Internacional de Agricultura Tropical (CIAT).

Location of urban, rural, and urban coastal boundaries in San Mateo County.

Refer to the current geographies boundaries table for a list of all current geographies and recent updates.

This dataset is the definitive version of the annually released urban rural (UR) boundaries as at 1 January 2025 as defined by Stats NZ. This version contains 689 UR areas, including 195 urban areas and 402 rural settlements.

Urban rural (UR) is an output geography that classifies New Zealand into areas that share common urban or rural characteristics and is used to disseminate a broad range of Stats NZ’s social, demographic and economic statistics.

The UR separately identifies urban areas, rural settlements, other rural areas, and water areas. Urban areas and rural settlements are form-based geographies delineated by the inspection of aerial imagery, local government land designations on district plan maps, address registers, property title data, and any other available information. However, because the underlying meshblock pattern is used to define the geographies, boundaries may not align exactly with local government land designations or what can be seen in aerial images. Other rural areas, and bodies of water represent areas not included within an urban area.

Urban areas are built from the statistical area 2 (SA2) geography, while rural and water areas are built from the statistical area 1 (SA1) geography.

Urban areas

Urban areas are statistically defined areas with no administrative or legal basis. They are characterised by high population density with many built environment features where people and buildings are located close together for residential, cultural, productive, trade and social purposes.

Urban areas are delineated using the following criteria. They:

form a contiguous cluster of one or more SA2s,

contain an estimated resident population of more than 1,000 people and usually have a population density of more than 400 residents or 200 address points per square kilometre,

have a high coverage of built physical structures and artificial landscapes such as:

• residential dwellings and apartments,
• commercial structures, such as factories, office complexes, and shopping centres,
• transport and communication facilities, such as airports, ports and port facilities, railway stations, bus stations and similar transport hubs, and communications infrastructure,
• medical, education, and community facilities,
• tourist attractions and accommodation facilities,
• waste disposal and sewerage facilities,
• cemeteries,
• sports and recreation facilities, such as stadiums, golf courses, racecourses, showgrounds, and fitness centres,
• green spaces, such as community parks, gardens, and reserves,

have strong economic ties where people gather together to work, and for social, cultural, and recreational interaction,

have planned development within the next 5–8 years.

Urban boundaries are independent of local government and other administrative boundaries. However, the Richmond urban area, which is mainly in the Tasman District, is the only urban area that crosses territorial authority boundaries

Rural areas

Rural areas are classified as rural settlements or other rural.

Rural settlements

Rural settlements are statistically defined areas with no administrative or legal basis. A rural settlement is a cluster of residential dwellings about a place that usually contains at least one community or public building.

Rural settlements are delineated using the following criteria. They:

form a contiguous cluster of one or more SA1s,

contain an estimated resident population of 200–1,000, or at least 40 residential dwellings,

represent a reasonably compact area or have a visible centre of population with a population density of at least 200 residents per square kilometre or 100 address points per square kilometre,

contain at least one community or public building, such as a church, school, or shop.

To reach the target SA2 population size of more than 1,000 residents, rural settlements are usually included with other rural SA1s to form an SA2. In some instances, the settlement and the SA2 have the same name, for example, Kirwee rural settlement is part of the Kirwee SA2.

Some rural settlements whose populations are just under 1,000 are a single SA2. Creating separate SA2s for these rural settlements allows for easy reclassification to urban areas if their populations grow beyond 1,000.

Other rural

Other rural areas are the mainland areas and islands located outside urban areas or rural settlements. Other rural areas include land used for agriculture and forestry, conservation areas, and regional and national parks. Other rural areas are defined by territorial authority.

Water

Bodies of water are classified separately, using the land/water demarcation classification described in the Statistical standard for meshblock. These water areas are not named and are defined by territorial authority or regional council.

The water classes include:

inland water – non-contiguous, defined by territorial authority,

inlets (which also includes tidal areas and harbours) – non-contiguous, defined by territorial authority,

oceanic – non-contiguous, defined by regional council.

To minimise suppression of population data, separate meshblocks have been created for marinas. These meshblocks are attached to adjacent land in the UR geography.

Non-digitised

The following 4 non-digitised UR areas have been aggregated from the 16 non-digitised meshblocks/SA2s.

6901; Oceanic outside region, 6902; Oceanic oil rigs, 6903; Islands outside region, 6904; Ross Dependency outside region.

UR numbering and naming

Each urban area and rural settlement is a single geographic entity with a name and a numeric code.

Other rural areas, inland water areas, and inlets are defined by territorial authority; oceanic areas are defined by regional council; and each have a name and a numeric code.

Urban rural codes have four digits. North Island locations start with a 1, South Island codes start with a 2, oceanic codes start with a 6 and non-digitised codes start with 69.

Urban rural indicator (IUR)

The accompanying urban rural indicator (IUR) classifies the urban, rural, and water areas by type. Urban areas are further classified by the size of their estimated resident population:

• major urban area – 100,000 or more residents,
• large urban area – 30,000–99,999 residents,
• medium urban area – 10,000–29,999 residents,
• small urban area – 1,000–9,999 residents.

This was based on 2018 Census data and 2021 population estimates. Their IUR status (urban area size/rural settlement) may change if the 2025 Census population count moves them up or down a category.

The indicators, by name, with their codes in brackets, are:

urban area – major urban (11), large urban (12), medium urban (13), small urban (14),

rural area – rural settlement (21), rural other (22),

water – inland water (31), inlet (32), oceanic (33).

​

High definition version

This high definition (HD) version is the most detailed geometry, suitable for use in GIS for geometric analysis operations and for the computation of areas, centroids and other metrics. The HD version is aligned to the LINZ cadastre.

​

Macrons

Names are provided with and without tohutō/macrons. The column name for those without macrons is suffixed ‘ascii’.

​

Digital data

Digital boundary data became freely available on 1 July 2007.

​

Further information

To download geographic classifications in table formats such as CSV please use Ariā

For more information please refer to the Statistical standard for geographic areas 2023.

Contact: geography@stats.govt.nz

This link contains downloadable data for the Atlas of Rural and Small-Town America which provides statistics by broad categories of socioeconomic factors: People: Demographic data from the American Community Survey (ACS), including age, race and ethnicity, migration and immigration, education, household size, and family composition. Jobs: Economic data from the Bureau of Labor Statistics and other sources, including information on employment trends, unemployment, and industrial composition of employment from the ACS. County classifications: Categorical variables including the rural-urban continuum codes, economic dependence codes, persistent poverty, persistent child poverty, population loss, onshore oil/natural gas counties, and other ERS county typology codes. Income: Data on median household income, per capita income, and poverty (including child poverty). Veterans: Data on veterans, including service period, education, unemployment, income, and other demographic characteristics.

This Alberta Official Statistic describes the percent change in Alberta’s population between 1986 and 2011 by 5-year census cycles. The population is divided into "Larger Urban Centres" and Rural and Small Town areas. Within rural Alberta, the population is divided into four categories with each category consecutively representing lesser integration with urban economies. The four categories are called Metropolitan Influenced Zones (MIZ) and capture urban integration based on the percent of the working population commuting to urban centers. The categories are: Strong MIZ (where 30% or more of the workforce commutes to an urban core) Moderate MIZ (where 5% to 29% commute to any urban core) Weak MIZ (where greater than 0% but less than 5% commute to any urban core) No MIZ (where there are no residents commuting to an urban core)

2007 marked the first year where more of the world's population lived in an urban setting than a rural setting. In 1960, roughly a third of the world lived in an urban setting; it is expected that this figure will reach two thirds by 2050. Urbanization is a fairly new phenomenon; for the vast majority of human history, fewer than five percent of the world lived in urban areas, due to the dependency on subsistence agriculture. Advancements in agricultural practices and technology then coincided with the beginning of the industrial revolution in Europe in the late 19th century, which resulted in waves of urbanization to meet the demands of emerging manufacturing industries. This trend was replicated across the rest of the world as it industrialized over the following two centuries, and the most significant increase coincided with the industrialization of the most populous countries in Asia. In more developed economies, urbanization remains high even as economies de-industrialize, due to a variety of factors such as housing availability, labor demands in service industries, and social trends.

FHFA's Duty to Serve regulation defines "rural area" as: (i) A census tract outside of an MSA as designated by the Office of Management and Budget (OMB); or (ii) A census tract in an MSA as designated by OMB that is: (A) Outside of the MSA’s Urbanized Areas as designated by the U.S. Department of Agriculture’s (USDA) Rural-Urban Commuting Area (RUCA) Code #1, and outside of tracts with a housing density of over 64 housing units per square mile for USDA’s RUCA Code #2; or (B) A colonia census tract that does not satisfy paragraphs (i) or (ii)(A) of this definition. This data contains both the specific geographies which meet the Rural Areas definition and also the areas defined as “high-needs rural regions”.

CLICK ON THE ABOVE IMAGE TO LAUNCH THE MAP - Healthcare access issues vary greatly between urban and rural areas of New Mexico. Launch the map to explore alternate ways to classify geographies as urban or rural. These classifications are often used for food access as well as healthcare access.BIBLIOGRAPHY WITH LINKS:US Census Bureau, Urban Area - Urban Cluster FAQ - https://www2.census.gov/geo/pdfs/reference/ua/2010ua_faqs.pdfAre the problems with Rural areas actually just a result of definitions that change?: "When a rural county grows, it transmutes into an urban one." - The real (surprisingly comforting) reason rural America is doomed to decline, https://www.washingtonpost.com/business/2019/05/24/real-surprisingly-comforting-reason-rural-america-is-doomed-decline/ (See also the complete study - http://programme.exordo.com/2018annualmeeting/delegates/presentation/130/ )Rural Definitions for Health Policy, Harvey Licht, a presentation for the University of New Mexico Center for Health Policy: : http://nmcdc.maps.arcgis.com/home/item.html?id=7076f283b8de4bb69bf3153bc42e0402Rural Definitions for Health Policy, update of 2019, Harvey Licht, a presentation to the NMDOH Quarterly Epidemiology Meeting, November, 2019 - http://www.arcgis.com/home/item.html?id=a60a73f4e5614eb3ab01e2f96227ce4bNew Mexico Rural-Urban Counties Comparison Tables - October 2017, Harvey Licht, A preliminary compilation for the National Conference of State Legislators Rural Health Plan Taskforce : https://nmcdc.maps.arcgis.com/home/item.html?id=d3ca56e99f8b45c58522b2f9e061999eNew Mexico Rural Health Plan - Report of the Rural Health Planning Workgroup convened by the NM Department of Health 2018-2019 - http://nmcdc.maps.arcgis.com/home/item.html?id=d4b9b66a5ca34ec9bbe90efd9562586aFrontier and Remote Areas Zip Code Map - http://nmcdc.maps.arcgis.com/home/webmap/viewer.html?webmap=56b4005256244499a58f863c17bbac8aHOUSING ISSUES, RURAL & URBAN, 2017 - http://nmcdc.maps.arcgis.com/home/webmap/viewer.html?webmap=3e3aeabc04ac4672994e25a1ec94df83FURTHER READING:What is Rural? Rural Health Information Hub: https://www.ruralhealthinfo.org/topics/what-is-ruralDefining Rural. Research and Training Center on Disability in Rural Communities: http://rtc.ruralinstitute.umt.edu/resources/defining-rural/What is Rural? USDA: https://www.ers.usda.gov/topics/rural-economy-population/rural-classifications/what-is-rural/National Center for Health Statistics Urban–Rural Classification Scheme: https://www.cdc.gov/nchs/data_access/urban_rural.htm.Health-Related Behaviors by Urban-Rural County Classification — United States, 2013, CDC: https://www.cdc.gov/mmwr/volumes/66/ss/ss6605a1.htm?s_cid=ss6605a1_wExtending Work on Rural Health Disparities, The Journal of Rural Health: http://onlinelibrary.wiley.com/doi/10.1111/jrh.12241/fullMinority Populations Driving Community Growth in the Rural West, Headwaters Economics: https://headwaterseconomics.org/economic-development/trends-performance/minority-populations-driving-county-growth/ Methodology - https://headwaterseconomics.org/wp-content/uploads/Minorities_Methods.pdfThe Role of Medicaid in Rural America, Kaiser Family Foundation: http://www.kff.org/medicaid/issue-brief/the-role-of-medicaid-in-rural-america/The Future of the Frontier: Water, Energy & Climate Change in America’s Most Remote Communities: http://frontierus.org/wp-content/uploads/2017/09/FUTURE-OF-THE-FRONTIER_Final-Version_Spring-2017.pdfRural and Urban Differences in Passenger-Vehicle–Occupant Deaths and Seat Belt Use Among Adults — United States, 2014, CDC: https://www.cdc.gov/mmwr/volumes/66/ss/ss6617a1.htm