A data set of cross-nationally comparable microdata samples for 15 Economic Commission for Europe (ECE) countries (Bulgaria, Canada, Czech Republic, Estonia, Finland, Hungary, Italy, Latvia, Lithuania, Romania, Russia, Switzerland, Turkey, UK, USA) based on the 1990 national population and housing censuses in countries of Europe and North America to study the social and economic conditions of older persons. These samples have been designed to allow research on a wide range of issues related to aging, as well as on other social phenomena. A common set of nomenclatures and classifications, derived on the basis of a study of census data comparability in Europe and North America, was adopted as a standard for recoding. This series was formerly called Dynamics of Population Aging in ECE Countries. The recommendations regarding the design and size of the samples drawn from the 1990 round of censuses envisaged: (1) drawing individual-based samples of about one million persons; (2) progressive oversampling with age in order to ensure sufficient representation of various categories of older people; and (3) retaining information on all persons co-residing in the sampled individual''''s dwelling unit. Estonia, Latvia and Lithuania provided the entire population over age 50, while Finland sampled it with progressive over-sampling. Canada, Italy, Russia, Turkey, UK, and the US provided samples that had not been drawn specially for this project, and cover the entire population without over-sampling. Given its wide user base, the US 1990 PUMS was not recoded. Instead, PAU offers mapping modules, which recode the PUMS variables into the project''''s classifications, nomenclatures, and coding schemes. Because of the high sampling density, these data cover various small groups of older people; contain as much geographic detail as possible under each country''''s confidentiality requirements; include more extensive information on housing conditions than many other data sources; and provide information for a number of countries whose data were not accessible until recently. Data Availability: Eight of the fifteen participating countries have signed the standard data release agreement making their data available through NACDA/ICPSR (see links below). Hungary and Switzerland require a clearance to be obtained from their national statistical offices for the use of microdata, however the documents signed between the PAU and these countries include clauses stipulating that, in general, all scholars interested in social research will be granted access. Russia requested that certain provisions for archiving the microdata samples be removed from its data release arrangement. The PAU has an agreement with several British scholars to facilitate access to the 1991 UK data through collaborative arrangements. Statistics Canada and the Italian Institute of statistics (ISTAT) provide access to data from Canada and Italy, respectively. * Dates of Study: 1989-1992 * Study Features: International, Minority Oversamples * Sample Size: Approx. 1 million/country Links: * Bulgaria (1992), http://www.icpsr.umich.edu/icpsrweb/ICPSR/studies/02200 * Czech Republic (1991), http://www.icpsr.umich.edu/icpsrweb/ICPSR/studies/06857 * Estonia (1989), http://www.icpsr.umich.edu/icpsrweb/ICPSR/studies/06780 * Finland (1990), http://www.icpsr.umich.edu/icpsrweb/ICPSR/studies/06797 * Romania (1992), http://www.icpsr.umich.edu/icpsrweb/ICPSR/studies/06900 * Latvia (1989), http://www.icpsr.umich.edu/icpsrweb/ICPSR/studies/02572 * Lithuania (1989), http://www.icpsr.umich.edu/icpsrweb/ICPSR/studies/03952 * Turkey (1990), http://www.icpsr.umich.edu/icpsrweb/ICPSR/studies/03292 * U.S. (1990), http://www.icpsr.umich.edu/icpsrweb/ICPSR/studies/06219

Abstract

The main objectives of the study were to assess the knowledge and beliefs of high-risk groups about STI and HIV, determine the prevalence of HIV infection and syphilis among these groups and obtain baseline data that will permit comparisons of risk behaviours, HIV infection and syphilis over time.

Geographic coverage

Six selected states

Analysis unit

State, group, individual

Universe

The Integrated Biological and Behavioural Surveillance Survey 2007 covered only males and females aged up to 15-49 years among seven sub-populations at risk of HIV in six selected states of Nigeria, namely Female Sex Workers (both brothel- and non-brothel-based), men who have sex with men (MSM), injecting drug users (IDU), members of the armed forces, police, and transport workers (TW).

Kind of data

Sample survey data [ssd]

Sampling procedure

In order to reach a representative sample of all groups involved in the 2007 IBBSS, a number of different sampling techniques were used depending on the group in question, including simple random sampling (SRS), cluster sampling (probability proportionate to size (PPS) for fixed populations), time-location sampling (TLS) and respondent-driven sampling (RDS). For MSM and IDU, the RDS method was used, while a TLS technique was used to select non-brothel-based FSW and TW. The brothel-based FSW, armed forces, and police were selected using a two-stage cluster sampling technique. The take all (TA) sampling method was used when the desired sample size was not attainable based on the results of target population mapping.

ITLS is a form of cluster sampling that contains both time and location dimensions. TLS provides the opportunity to reach members of a target population who access certain locations at any point in time. The process starts by creating time * location PSU (PSU that have both a time and a location dimensions) from which a random sample is selected. At the second stage all or a sub-sample of randomly selected population members who appear at the site during a designated time interval of fixed length, for example 4 hours, are interviewed. To the extent that all members of a target population access the locations at some point in time, TLS is a probability sampling method because: (i) all population members have a non-zero chance of selection as long as the TLS frame is complete; and (ii) the selection probabilities can be calculated by taking the time dimension as well as the space dimension into account.

RDS is a method that combines "snowball sampling" with a mathematical model that weights the sample to compensate for the fact that the sample was collected in a non-random way. Characterized by long referral chains (to ensure that all members of the target population can be reached) and a statistical theory of the sampling process which controls for bias including the effects of choice of seeds and differences in network size, RDS overcomes the shortcomings of institutional sampling (coverage) and snow-ball type methods (statistical validity). By making chain-referral into a probability sampling method and consequently resolving the dilemma of a choice between coverage and statistical validity, RDS has become the most appropriate method for reaching the hard-to-reach population groups. The RDS process starts with the recruitment of the initial seeds each of whom recruits a maximum of two to three members from their population group.

Sampling deviation

Cluster samples were chosen randomly based on sampling frames developed through the mapping process. This process was to identify places where potential subjects could be reached and sampled. Field work for the mapping exercise was performed over one week. Due to the limited period some hidden populations may not be adequately represented in sampling frames.

Mode of data collection

Face-to-face [f2f]

Research instrument

The questionnaire was designed in collaboration with FMOH, SFH, CDC, WHO, UNAIDS and other stakeholders. At both central- and state-level trainings, each question in the questionnaire was reviewed and role-played and possible challenges were identified and addressed. The questionnaire of Integrated Biological and Behavioural Surveillance Survey 2007 was grouped into fifteen sections

Section 0: Identification particularsBackground characteristics Section 1: Background characteristics Section 2: Marriage and partnerships Section 3: Sexual history numbers and types of partners Section 4: Sexual history-regular partners (for those with spouse/live-in sexual partners only; for MSM, female spouse/live-in sexual partners only) Section 5: Sexual history-boy friends/girl friends (for those with boy friends/girl friends sexual partners only; for MSM, female boy friends/girl friends sexual partners only) Section 6: Sexual history-purchasing sex (male only) (for those with commercial sex partners only; for MSM, female commercial sex partners only) Section 7: Sexual history-casual-non regular non-paying sexual partners (for those with casual sexual partners only; for MSM, female casual sexual partners only) Section 8: Selling sex (for female populatios only) Section 9: Social habits (all groups) Section 10: Dru use/needle sharing (all population reporting drug injection in the past 12 months) Section 11: MSM-men who have sex with men (ask all respondents) Section 12: STIs (ask all respondents) Section 13: Knowledge, opinions, and attitudes towards HIV/AIDS (ask all respondents) Section 12: Exposure to interventions

Cleaning operations

After data entry, the data was cleaned using STATA 10. Frequency counts were carried out to check consistency and assess cleaniness of the database. The data cleaning also included the following:

Searching for ages outside the age range criteria; Cross-checking all corresponding skips to the questionnaire; Reviewing the cluster allocations; Cross-checking the questionnaire completion responses from the interviewers in the database with the records in the supervisors log to ensure they matched; Tallying the supervisors log of blood samples collected to ensure that recorded numbers of samples collected matched the results recorded in the database; and Consistency checks involving cross-checking answers to related questions.

Response rate

There were 11,175 individuals selected for this study out of whom 0.8% and 8.1% refused to participate in behavioural and biological componenets of the study respectively.

Non-brothel based FSW had the highest refusal rate of 2.7% and 19.4% for behavioural and biological components respectively, followed by brothel-based FSW at 2.2% and 13.1% respectively. Refusal rates for the behavioural component were less than 0.5% for other groups.

For the biological component, refusal rates were 3% for police, 0.8% for the armed forces, 1 .2% for TW, 4.6% for MSM, and 3.3% for IDU.

Sampling error estimates

No sampling error estimate

Data appraisal

A template for the questionnaire was designed with pre-programmed consistency checks for cross-checking answers, including skips and eligibility criteria. Laboratory data forms were collected on a periodic basis from the central laboratories and brought to the same centralized location for data entry. At least 25% of the questionnaires entered daily by each data entry clerk had the behaviour and other non-biological data entered, while 100% double-data entry was achieved for the biological data for quality control purposes. The data entry clerks were supervised by three supervisors who reviewed and validated all questionnaires entered.

Values are for low (LC) and high clustered (HC) populations with different proportions intensively surveyed and detection probabilities. Proportion surveyed with the rapid method was 50%. Values are based on 1,000 simulated surveys.

Abstract

The Estimating the Size of Populations through a Household Survey (EPSHS), sought to assess the feasibility of the network scale-up and proxy respondent methods for estimating the sizes of key populations at higher risk of HIV infection and to compare the results to other estimates of the population sizes. The study was undertaken based on the assumption that if these methods proved to be feasible with a reasonable amount of data collection for making adjustments, countries would be able to add this module to their standard household survey to produce size estimates for their key populations at higher risk of HIV infection. This would facilitate better programmatic responses for prevention and caring for people living with HIV and would improve the understanding of how HIV is being transmitted in the country.

The specific objectives of the ESPHS were: 1. To assess the feasibility of the network scale-up method for estimating the sizes of key populations at higher risk of HIV infection in a Sub-Saharan African context; 2. To assess the feasibility of the proxy respondent method for estimating the sizes of key populations at higher risk of HIV infection in a Sub-Saharan African context; 3. To estimate the population size of MSM, FSW, IDU, and clients of sex workers in Rwanda at a national level; 4. To compare the estimates of the sizes of key populations at higher risk for HIV produced by the network scale-up and proxy respondent methods with estimates produced using other methods; and 5. To collect data to be used in scientific publications comparing the use of the network scale-up method in different national and cultural environments.

Geographic coverage

National

Analysis unit

• Household
• Individual

Sampling procedure

The Estimating the Size of Populations through a Household Survey (ESPHS) used a two-stage sample design, implemented in a representative sample of 2,125 households selected nationwide in which all women and men age 15 years and above where eligible for an individual interview. The sampling frame used was the preparatory frame for the Rwanda Population and Housing Census (RPHC), which was conducted in 2012; it was provided by the National Institute of Statistics of Rwanda (NISR).

The sampling frame was a complete list of natural villages covering the whole country (14,837 villages). Two strata were defined: the city of Kigali and the rest of the country. One hundred and thirty Primary Sampling Units (PSU) were selected from the sampling frame (35 in Kigali and 95 in the other stratum). To reduce clustering effect, only 20 households were selected per cluster in Kigali and 15 in the other clusters. As a result, 33 percent of the households in the sample were located in Kigali.

The list of households in each cluster was updated upon arrival of the survey team in the cluster. Once the listing had been updated, a number was assigned to each existing household in the cluster. The supervisor then identified the households to be interviewed in the survey by using a table in which the households were randomly pre-selected. This table also provided the list of households pre-selected for each of the two different definitions of what it means "to know" someone.

For further details on sample design and implementation, see Appendix A of the final report.

Mode of data collection

Face-to-face [f2f]

Research instrument

The Estimating the Size of Populations through a Household Survey (ESPHS) used two types of questionnaires: a household questionnaire and an individual questionnaire. The same individual questionnaire was used to interview both women and men. In addition, two versions of the individual questionnaire were developed, using two different definitions of what it means “to know” someone. Each version of the individual questionnaire was used in half of the selected households.

Cleaning operations

The processing of the ESPHS data began shortly after the fieldwork commenced. Completed questionnaires were returned periodically from the field to the SPH office in Kigali, where they were entered and checked for consistency by data processing personnel who were specially trained for this task. Data were entered using CSPro, a programme specially developed for use in DHS surveys. All data were entered twice (100 percent verification). The concurrent processing of the data was a distinct advantage for data quality, because the School of Public Health had the opportunity to advise field teams of problems detected during data entry. The data entry and editing phase of the survey was completed in late August 2011.

Response rate

A total of 2,125 households were selected in the sample, of which 2,120 were actually occupied at the time of the interview. The number of occupied households successfully interviewed was 2,102, yielding a household response rate of 99 percent.

From the households interviewed, 2,629 women were found to be eligible and 2,567 were interviewed, giving a response rate of 98 percent. Interviews with men covered 2,102 of the eligible 2,149 men, yielding a response rate of 98 percent. The response rates do not significantly vary by type of questionnaire or residence.

Sampling error estimates

The estimates from a sample survey are affected by two types of errors: (1) non-sampling errors, and (2) sampling errors. Non-sampling errors are the results of mistakes made in implementing data collection and data processing, such as failure to locate and interview the correct household, misunderstanding of the questions on the part of either the interviewer or the respondent, and data entry errors. Although numerous efforts were made to minimize this type of error during the implementation of the Rwanda ESPHS 2011, non-sampling errors are impossible to avoid and difficult to evaluate statistically.

Sampling errors, on the other hand, can be evaluated statistically. The sample of respondents selected in the ESPHS 2011 is only one of many samples that could have been selected from the same population, using the same design and identical size. Each of these samples would yield results that differ somewhat from the results of the actual sample selected. Sampling errors are a measure of the variability between all possible samples. Although the degree of variability is not known exactly, it can be estimated from the survey results.

A sampling error is usually measured in terms of the standard error for a particular statistic (mean, percentage, etc.), which is the square root of the variance. The standard error can be used to calculate confidence intervals within which the true value for the population can reasonably be assumed to fall. For example, for any given statistic calculated from a sample survey, the value of that statistic will fall within a range of plus or minus two times the standard error of that statistic in 95 percent of all possible samples of identical size and design.

If the sample of respondents had been selected as a simple random sample, it would have been possible to use straightforward formulas for calculating sampling errors. However, the ESPHS 2011 sample is the result of a multi-stage stratified design, and, consequently, it was necessary to use more complex formulae. The computer software used to calculate sampling errors for the ESPHS 2011 is a SAS program. This program uses the Taylor linearization method for variance estimation for survey estimates that are means or proportions.

A more detailed description of estimates of sampling errors are presented in Appendix B of the survey report.

Abstract

Most countries collect official statistics on energy use due to its vital role in the infrastructure, economy and living standards.

In Palestine, additional attention is warranted for energy statistics due to a scarcity of natural resources, the high cost of energy and high population density. These factors demand comprehensive and high quality statistics.

In this contest PCBS decided to conduct a special Energy Consumption in Transport Survey to provide high quality data about energy consumption by type, expenditure on maintenance and insurance for vehicles, and questions on vehicles motor capacity and year of production.

The survey aimed to provide data on energy consumption by transport sector and also on the energy consumption by the type of vehicles and its motor capacity and year of production.

Geographic coverage

Palestine

Analysis unit

Vehicles

Universe

All the operating vehicles in Palestine in 2014.

Kind of data

Sample survey data [ssd]

Sampling procedure

Target Population: All the operating vehicles in Palestine in 2014.

2.1Sample Frame A list of the number of the operating vehicles in Palestine in 2014, they are broken down by governorates and vehicle types, this list was obtained from Ministry of transport.

2.2.1 Sample size The sample size is 6,974 vehicles.

2.2.2 Sampling Design it is stratified random sample, and in some of the small size strata the quota sample was used to cover them.

The method of reaching the vehicles sample was through : 1-reaching to all the dynamometers (the centers for testing the vehicles) 2-selecting a random sample of vehicles by type of vehicle, model, fuel type and engine capacity

Mode of data collection

Face-to-face [f2f]

Research instrument

The design of the questionnaire was based on the experiences of other similar countries in energy statistics subject to cover the most important indicators for energy statistics in transport sector, taking into account Palestine's particular situation.

Cleaning operations

The data processing stage consisted of the following operations: Editing and coding prior to data entry: all questionnaires were edited and coded in the office using the same instructions adopted for editing in the field.

Data entry: The survey questionnaire was uploaded on office computers. At this stage, data were entered into the computer using a data entry template developed in Access Database. The data entry program was prepared to satisfy a number of requirements: ·To prevent the duplication of questionnaires during data entry. ·To apply checks on the integrity and consistency of entered data. ·To handle errors in a user friendly manner. ·The ability to transfer captured data to another format for data analysis using statistical analysis software such as SPSS. Audit after data entered at this stage is data entered scrutiny by pulling the data entered file periodically and review the data and examination of abnormal values and check consistency between the different questions in the questionnaire, and if there are any errors in the data entered to be the withdrawal of the questionnaire and make sure this data and adjusted, even been getting the final data file that is the final extract data from it. Extraction Results: The extract final results of the report by using the SPSS program, and then display the results through tables to Excel format.

Response rate

80.7%

Sampling error estimates

Data of this survey may be affected by sampling errors due to use of a sample and not a complete enumeration. Therefore, certain differences are anticipated in comparison with the real values obtained through censuses. The variance was calculated for the most important indicators: the variance table is attached with the final report. There is no problem in the dissemination of results at national and regional level (North, Middle, South of West Bank, Gaza Strip).

Data appraisal

The survey sample consisted of around 6,974 vehicles, of which 5,631 vehicles completed the questionnaire, 3,652 vehicles from the West Bank and 1,979 vehicles in Gaza Strip.

I explore the sample size in qualitative research that is required to reach theoretical saturation. I conceptualize a population as consisting of sub-populations that contain different types of information sources that hold a number of codes. Theoretical saturation is reached after all the codes in the population have been observed once in the sample. I delineate three different scenarios to sample information sources: “random chance,” which is based on probability sampling, “minimal information,” which yields at least one new code per sampling step, and “maximum information,” which yields the largest number of new codes per sampling step. Next, I use simulations to assess the minimum sample size for each scenario for systematically varying hypothetical populations. I show that theoretical saturation is more dependent on the mean probability of observing codes than on the number of codes in a population. Moreover, the minimal and maximal information scenarios are significantly more efficient than random chance, but yield fewer repetitions per code to validate the findings. I formulate guidelines for purposive sampling and recommend that researchers follow a minimum information scenario.

Abstract

IPUMS-International is an effort to inventory, preserve, harmonize, and disseminate census microdata from around the world. The project has collected the world's largest archive of publicly available census samples. The data are coded and documented consistently across countries and over time to facillitate comparative research. IPUMS-International makes these data available to qualified researchers free of charge through a web dissemination system.

The IPUMS project is a collaboration of the Minnesota Population Center, National Statistical Offices, and international data archives. Major funding is provided by the U.S. National Science Foundation and the Demographic and Behavioral Sciences Branch of the National Institute of Child Health and Human Development. Additional support is provided by the University of Minnesota Office of the Vice President for Research, the Minnesota Population Center, and Sun Microsystems.

Geographic coverage

National coverage

Analysis unit

Dwelling

UNITS IDENTIFIED: - Dwellings: No - Households: Yes - Individuals: Yes - Group quarters: Yes

UNIT DESCRIPTIONS: - Group quarters: A collective household is a group of persons that does not live in an ordinary household, but lives in a collective establishment, sharing meal times.

Universe

Residents of France, of any nationality. Does not include French citizens living in other countries, foreign tourists, or people passing through.

Kind of data

Census/enumeration data [cen]

Sampling procedure

SAMPLE UNIT: Private dwellings and individuals for group quarters and compte a part

SAMPLE FRACTION: 5%

SAMPLE UNIVERSE: The microdata sample includes mainland France and Corsica.

SAMPLE SIZE (person records): 2,934,758

Mode of data collection

Face-to-face [f2f]

Research instrument

Form 1A for dwelling consists of (1) dwelling characteristics, (2) List A. permanent occupants of the dwelling, (3) List B. household members who do not live in the dwelling of enumeration, and (4) building characteristics; Form 2B. Individual form.

Geographic coverage

National coverage

Analysis unit

households/individuals

Kind of data

survey

Frequency of data collection

Quarterly

Sampling procedure

Sample size:

Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, it is the Census Bureau's Population Estimates Program that produces and disseminates the official estimates of the population for the nation, states, counties, cities, and towns and estimates of housing units for states and counties..Supporting documentation on code lists, subject definitions, data accuracy, and statistical testing can be found on the American Community Survey website in the Technical Documentation section.Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Source: U.S. Census Bureau, 2017-2021 American Community Survey 5-Year Estimates.Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted roughly as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see ACS Technical Documentation). The effect of nonsampling error is not represented in these tables..Methodological changes to citizenship edits may have affected citizenship data for those born in American Samoa. Users should be aware of these changes when using 2018 data or multi-year data containing data from 2018. For more information, see: American Samoa Citizenship User Note..When information is missing or inconsistent, the Census Bureau logically assigns an acceptable value using the response to a related question or questions. If a logical assignment is not possible, data are filled using a statistical process called allocation, which uses a similar individual or household to provide a donor value. The "Allocated" section is the number of respondents who received an allocated value for a particular subject..The 2017-2021 American Community Survey (ACS) data generally reflect the March 2020 Office of Management and Budget (OMB) delineations of metropolitan and micropolitan statistical areas. In certain instances, the names, codes, and boundaries of the principal cities shown in ACS tables may differ from the OMB delineation lists due to differences in the effective dates of the geographic entities..Estimates of urban and rural populations, housing units, and characteristics reflect boundaries of urban areas defined based on Census 2010 data. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..Explanation of Symbols:- The estimate could not be computed because there were an insufficient number of sample observations. For a ratio of medians estimate, one or both of the median estimates falls in the lowest interval or highest interval of an open-ended distribution. For a 5-year median estimate, the margin of error associated with a median was larger than the median itself.N The estimate or margin of error cannot be displayed because there were an insufficient number of sample cases in the selected geographic area. (X) The estimate or margin of error is not applicable or not available.median- The median falls in the lowest interval of an open-ended distribution (for example "2,500-")median+ The median falls in the highest interval of an open-ended distribution (for example "250,000+").** The margin of error could not be computed because there were an insufficient number of sample observations.*** The margin of error could not be computed because the median falls in the lowest interval or highest interval of an open-ended distribution.***** A margin of error is not appropriate because the corresponding estimate is controlled to an independent population or housing estimate. Effectively, the corresponding estimate has no sampling error and the margin of error may be treated as zero.

Abstract

This study is an experiment designed to compare the performance of three methodologies for sampling households with migrants:

• a stratified sample using the census to sample census tracts randomly, in which each household is then listed and screened to determine whether or not it has a migrant, with the full length questionnaire then being applied in a second phase only to the households of interest;
• a snowball survey in which households are asked to provide referrals to other households with migrant members;
• an intercept point survey (or time-and-space sampling survey), in which individuals are sampled during set time periods at a prespecified set of locations where households in the target group are likely to congregate.

Researchers from the World Bank applied these methods in the context of a survey of Brazilians of Japanese descent (Nikkei), requested by the World Bank. There are approximately 1.2-1.9 million Nikkei among Brazil’s 170 million population.

The survey was designed to provide detail on the characteristics of households with and without migrants, to estimate the proportion of households receiving remittances and with migrants in Japan, and to examine the consequences of migration and remittances on the sending households.

The same questionnaire was used for the stratified random sample and snowball surveys, and a shorter version of the questionnaire was used for the intercept surveys. Researchers can directly compare answers to the same questions across survey methodologies and determine the extent to which the intercept and snowball surveys can give similar results to the more expensive census-based survey, and test for the presence of biases.

Geographic coverage

Sao Paulo and Parana states

Analysis unit

Japanese-Brazilian (Nikkei) households and individuals

The 2000 Brazilian Census was used to classify households as Nikkei or non-Nikkei. The Brazilian Census does not ask ethnicity but instead asks questions on race, country of birth and whether an individual has lived elsewhere in the last 10 years. On the basis of these questions, a household is classified as (potentially) Nikkei if it has any of the following: 1) a member born in Japan; 2) a member who is of yellow race and who has lived in Japan in the last 10 years; 3) a member who is of yellow race, who was not born in a country other than Japan (predominantly Korea, Taiwan or China) and who did not live in a foreign country other than Japan in the last 10 years.

Kind of data

Sample survey data [ssd]

Sampling procedure

1) Stratified random sample survey

Two states with the largest Nikkei population - Sao Paulo and Parana - were chosen for the study.

The sampling process consisted of three stages. First, a stratified random sample of 75 census tracts was selected based on 2000 Brazilian census. Second, interviewers carried out a door-to-door listing within each census tract to determine which households had a Nikkei member. Third, the survey questionnaire was then administered to households that were identified as Nikkei. A door-to-door listing exercise of the 75 census tracts was then carried out between October 13th, 2006, and October 29th, 2006. The fieldwork began on November 19, 2006, and all dwellings were visited at least once by December 22, 2006. The second wave of surveying took place from January 18th, 2007, to February 2nd, 2007, which was intended to increase the number of households responding.

2) Intercept survey

The intercept survey was designed to carry out interviews at a range of locations that were frequented by the Nikkei population. It was originally designed to be done in Sao Paulo city only, but a second intercept point survey was later carried out in Curitiba, Parana. Intercept survey took place between December 9th, 2006, and December 20th, 2006, whereas the Curitiba intercept survey took place between March 3rd and March 12th, 2007.

Consultations with Nikkei community organizations, local researchers and officers of the bank Sudameris, which provides remittance services to this community, were used to select a broad range of locations. Interviewers were assigned to visit each location during prespecified blocks of time. Two fieldworkers were assigned to each location. One fieldworker carried out the interviews, while the other carried out a count of the number of people with Nikkei appearance who appeared to be 18 years old or older who passed by each location. For the fixed places, this count was made throughout the prespecified time block. For example, between 2.30 p.m. and 3.30 p.m. at the sports club, the interviewer counted 57 adult Nikkeis. Refusal rates were carefully recorded, along with the sex and approximate age of the person refusing.

In all, 516 intercept interviews were collected.

3) Snowball sampling survey

The questionnaire that was used was the same as used for the stratified random sample. The plan was to begin with a seed list of 75 households, and to aim to reach a total sample of 300 households through referrals from the initial seed households. Each household surveyed was asked to supply the names of three contacts: (a) a Nikkei household with a member currently in Japan; (b) a Nikkei household with a member who has returned from Japan; (c) a Nikkei household without members in Japan and where individuals had not returned from Japan.

The snowball survey took place from December 5th to 20th, 2006. The second phase of the snowballing survey ran from January 22nd, 2007, to March 23rd, 2007. More associations were contacted to provide additional seed names (69 more names were obtained) and, as with the stratified sample, an adaptation of the intercept survey was used when individuals refused to answer the longer questionnaire. A decision was made to continue the snowball process until a target sample size of 100 had been achieved.

The final sample consists of 60 households who came as seed households from Japanese associations, and 40 households who were chain referrals. The longest chain achieved was three links.

Mode of data collection

Face-to-face [f2f]

Research instrument

1) Stratified sampling and snowball survey questionnaire

This questionnaire has 36 pages with over 1,000 variables, taking over an hour to complete.

If subjects refused to answer the questionnaire, interviewers would leave a much shorter version of the questionnaire to be completed by the household by themselves, and later picked up. This shorter questionnaire was the same as used in the intercept point survey, taking seven minutes on average. The intention with the shorter survey was to provide some data on households that would not answer the full survey because of time constraints, or because respondents were reluctant to have an interviewer in their house.

2) Intercept questionnaire

The questionnaire is four pages in length, consisting of 62 questions and taking a mean time of seven minutes to answer. Respondents had to be 18 years old or older to be interviewed.

Response rate

1) Stratified random sampling 403 out of the 710 Nikkei households were surveyed, an interview rate of 57%. The refusal rate was 25%, whereas the remaining households were either absent on three attempts or were not surveyed because building managers refused permission to enter the apartment buildings. Refusal rates were higher in Sao Paulo than in Parana, reflecting greater concerns about crime and a busier urban environment.

2) Intercept Interviews 516 intercept interviews were collected, along with 325 refusals. The average refusal rate is 39%, with location-specific refusal rates ranging from only 3% at the food festival to almost 66% at one of the two grocery stores.

This layer shows Population. This is shown by county boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.
This layer is symbolized to show the point by Population Density and size of the point by Total Population. The size of the symbol represents the total count of housing units. Population Density was calculated based on the total population and area of land fields, which both came from the U.S. Census Bureau. Formula used for Calculating the Pop Density (B01001_001E/GEO_LAND_AREA_SQ_KM). To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top right. Current Vintage: 2015-2019ACS Table(s): B01001, B09020Data downloaded from: Census Bureau's API for American Community Survey Date of API call: February 10, 2021National Figures: data.census.gov The United States Census Bureau's American Community Survey (ACS): About the SurveyGeography & ACSTechnical Documentation News & UpdatesThis ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. Please cite the Census and ACS when using this data.Data Note from the Census:Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables. Data Processing Notes: Boundaries come from the US Census TIGER geodatabases. Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines clipped for cartographic purposes. For census tracts, the water cutouts are derived from a subset of the 2010 AWATER (Area Water) boundaries offered by TIGER. For state and county boundaries, the water and coastlines are derived from the coastlines of the 500k TIGER Cartographic Boundary Shapefiles. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters). The States layer contains 52 records - all US states, Washington D.C., and Puerto RicoCensus tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99).Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey.Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.Margin of error (MOE) values of -555555555 in the API (or "*****" (five asterisks) on data.census.gov) are displayed as 0 in this dataset. The estimates associated with these MOEs have been controlled to independent counts in the ACS weighting and have zero sampling error. So, the MOEs are effectively zeroes, and are treated as zeroes in MOE calculations. Other negative values on the API, such as -222222222, -666666666, -888888888, and -999999999, all represent estimates or MOEs that can't be calculated or can't be published, usually due to small sample sizes.
All of these are rendered in this dataset as null (blank) values.

Additional information available in attached README.txt

Abstract

The Jordan Population and Family Health Survey (JPFHS) is part of the worldwide Demographic and Health Surveys Program, which is designed to collect data on fertility, family planning, and maternal and child health.

The primary objective of the 2012 Jordan Population and Family Health Survey (JPFHS) is to provide reliable estimates of demographic parameters, such as fertility, mortality, family planning, and fertility preferences, as well as maternal and child health and nutrition, that can be used by program managers and policymakers to evaluate and improve existing programs. The JPFHS data will be useful to researchers and scholars interested in analyzing demographic trends in Jordan, as well as those conducting comparative, regional, or cross-national studies.

Geographic coverage

National coverage

Analysis unit

• Household
• Women age 15-49

Kind of data

Sample survey data [ssd]

Sampling procedure

Sample Design The 2012 JPFHS sample was designed to produce reliable estimates of major survey variables for the country as a whole, urban and rural areas, each of the 12 governorates, and for the two special domains: the Badia areas and people living in refugee camps. To facilitate comparisons with previous surveys, the sample was also designed to produce estimates for the three regions (North, Central, and South). The grouping of the governorates into regions is as follows: the North consists of Irbid, Jarash, Ajloun, and Mafraq governorates; the Central region consists of Amman, Madaba, Balqa, and Zarqa governorates; and the South region consists of Karak, Tafiela, Ma'an, and Aqaba governorates.

The 2012 JPFHS sample was selected from the 2004 Jordan Population and Housing Census sampling frame. The frame excludes the population living in remote areas (most of whom are nomads), as well as those living in collective housing units such as hotels, hospitals, work camps, prisons, and the like. For the 2004 census, the country was subdivided into convenient area units called census blocks. For the purposes of the household surveys, the census blocks were regrouped to form a general statistical unit of moderate size (30 households or more), called a "cluster", which is widely used in surveys as a primary sampling unit (PSU).

Stratification was achieved by first separating each governorate into urban and rural areas and then, within each urban and rural area, by Badia areas, refugee camps, and other. A two-stage sampling procedure was employed. In the first stage, 806 clusters were selected with probability proportional to the cluster size, that is, the number of residential households counted in the 2004 census. A household listing operation was then carried out in all of the selected clusters, and the resulting lists of households served as the sampling frame for the selection of households in the second stage. In the second stage of selection, a fixed number of 20 households was selected in each cluster with an equal probability systematic selection. A subsample of two-thirds of the selected households was identified for anthropometry measurements.

Refer to Appendix A in the final report (Jordan Population and Family Health Survey 2012) for details of sampling weights calculation.

Mode of data collection

Face-to-face [f2f]

Research instrument

The 2012 JPFHS used two questionnaires, namely the Household Questionnaire and the Woman’s Questionnaire (see Appendix D). The Household Questionnaire was used to list all usual members of the sampled households, and visitors who slept in the household the night before the interview, and to obtain information on each household member’s age, sex, educational attainment, relationship to the head of the household, and marital status. In addition, questions were included on the socioeconomic characteristics of the household, such as source of water, sanitation facilities, and the availability of durable goods. Moreover, the questionnaire included questions about child discipline. The Household Questionnaire was also used to identify women who were eligible for the individual interview (ever-married women age 15-49 years). In addition, all women age 15-49 and children under age 5 living in the subsample of households were eligible for height and weight measurement and anemia testing.

The Woman’s Questionnaire was administered to ever-married women age 15-49 and collected information on the following topics: • Respondent’s background characteristics • Birth history • Knowledge, attitudes, and practice of family planning and exposure to family planning messages • Maternal health (antenatal, delivery, and postnatal care) • Immunization and health of children under age 5 • Breastfeeding and infant feeding practices • Marriage and husband’s background characteristics • Fertility preferences • Respondent’s employment • Knowledge of AIDS and sexually transmitted infections (STIs) • Other health issues specific to women • Early childhood development • Domestic violence

In addition, information on births, pregnancies, and contraceptive use and discontinuation during the five years prior to the survey was collected using a monthly calendar.

The Household and Woman’s Questionnaires were based on the model questionnaires developed by the MEASURE DHS program. Additions and modifications to the model questionnaires were made in order to provide detailed information specific to Jordan. The questionnaires were then translated into Arabic.

Anthropometric data were collected during the 2012 JPFHS in a subsample of two-thirds of the selected households in each cluster. All women age 15-49 and children age 0-4 in these households were measured for height using Shorr height boards and for weight using electronic Seca scales. In addition, a drop of capillary blood was taken from these women and children in the field to measure their hemoglobin level using the HemoCue system. Hemoglobin testing was used to estimate the prevalence of anemia.

Cleaning operations

Fieldwork and data processing activities overlapped. Data processing began two weeks after the start of the fieldwork. After field editing of questionnaires for completeness and consistency, the questionnaires for each cluster were packaged together and sent to the central office in Amman, where they were registered and stored. Special teams were formed to carry out office editing and coding of the openended questions.

Data entry and verification started after two weeks of office data processing. The process of data entry, including 100 percent reentry, editing, and cleaning, was done by using PCs and the CSPro (Census and Survey Processing) computer package, developed specially for such surveys. The CSPro program allows data to be edited while being entered. Data processing operations were completed by early January 2013. A data processing specialist from ICF International made a trip to Jordan in February 2013 to follow up on data editing and cleaning and to work on the tabulation of results for the survey preliminary report, which was published in March 2013. The tabulations for this report were completed in April 2013.

Response rate

In all, 16,120 households were selected for the survey and, of these, 15,722 were found to be occupied households. Of these households, 15,190 (97 percent) were successfully interviewed.

In the households interviewed, 11,673 ever-married women age 15-49 were identified and interviews were completed with 11,352 women, or 97 percent of all eligible women.

Sampling error estimates

The estimates from a sample survey are affected by two types of errors: (1) nonsampling errors and (2) sampling errors. Nonsampling errors are the results of mistakes made in implementing data collection and data processing, such as failure to locate and interview the correct household, misunderstanding of the questions on the part of either the interviewer or the respondent, and data entry errors. Although numerous efforts were made during the implementation of the 2012 Jordan Population and Family Health Survey (JPFHS) to minimize this type of error, nonsampling errors are impossible to avoid and difficult to evaluate statistically.

Sampling errors, on the other hand, can be evaluated statistically. The sample of respondents selected in the 2012 JPFHS is only one of many samples that could have been selected from the same population, using the same design and identical size. Each of these samples would yield results that differ somewhat from the results of the actual sample selected. Sampling error is a measure of the variability between all possible samples. Although the degree of variability is not known exactly, it can be estimated from the survey results.

A sampling error is usually measured in terms of the standard error for a particular statistic (mean, percentage, etc.), which is the square root of the variance. The standard error can be used to calculate confidence intervals within which the true value for the population can reasonably be assumed to fall. For example, for any given statistic calculated from a sample survey, the value of that statistic will fall within a range of plus or minus two times the standard error of that statistic in 95 percent of all possible samples of identical size and design.

If the sample of respondents had been selected as a simple random sample, it would have been possible to use straightforward formulas for calculating sampling errors. However, the 2012 JPFHS sample is the result of a multistage stratified design, and, consequently, it was necessary to use more complex formulae. The computer

The distinction between the effective size of a population (Ne) and the effective size of its neighborhoods (Nn) has sometimes become blurred. Ne reflects the effect of random sampling on the genetic composition of a population of size N, whereas Nn is a measure of within-population spatial genetic structure and depends strongly on the dispersal characteristics of a species. Although Nn is independent of Ne, the reverse is not true. Using simulations of a population of annual plants, it was found that the effect of Nn on Ne was well approximated by Ne=N/(1−FIS), where FIS (determined by Nn) was evaluated population wide. Nn only had a notable influence of increasing Ne as it became smaller (less than or equal to16). In contrast, the effect of Nn on genetic estimates of Ne was substantial. Using the temporal method (a standard two-sample approach) based on 1000 single-nucleotide polymorphisms (SNPs), and varying sampling method, sample size (2–25% of N) and interval between samples (T=1–32 generations), estimates of Ne ranged from infinity to <0.1% of the true value (defined as Ne based on 100% sampling). Estimates were never accurate unless Nn and T were large. Three sampling techniques were tested: same-site resampling, different-site resampling and random sampling. Random sampling was the least biased method. Extremely low estimates often resulted when different-site resampling was used, especially when the population was large and the sample fraction was small, raising the possibility that this estimation bias could be a factor determining some very low Ne/N that have been published.

Abstract

The Bangladesh Demographic and Health Survey (BDHS) is part of the worldwide Demographic and Health Surveys program, which is designed to collect data on fertility, family planning, and maternal and child health.

The BDHS is intended to serve as a source of population and health data for policymakers and the research community. In general, the objectives of the BDHS are to: - assess the overall demographic situation in Bangladesh, - assist in the evaluation of the population and health programs in Bangladesh, and - advance survey methodology.

More specifically, the objective of the BDHS is to provide up-to-date information on fertility and childhood mortality levels; nuptiality; fertility preferences; awareness, approval, and use of family planning methods; breastfeeding practices; nutrition levels; and maternal and child health. This information is intended to assist policymakers and administrators in evaluating and designing programs and strategies for improving health and family planning services in the country.

Geographic coverage

National

Analysis unit

• Household
• Children under five years
• Women age 10-49
• Men age 15-59

Kind of data

Sample survey data

Sampling procedure

Bangladesh is divided into six administrative divisions, 64 districts (zillas), and 490 thanas. In rural areas, thanas are divided into unions and then mauzas, a land administrative unit. Urban areas are divided into wards and then mahallas. The 1996-97 BDHS employed a nationally-representative, two-stage sample that was selected from the Integrated Multi-Purpose Master Sample (IMPS) maintained by the Bangladesh Bureau of Statistics. Each division was stratified into three groups: 1 ) statistical metropolitan areas (SMAs), 2) municipalities (other urban areas), and 3) rural areas. 3 In the rural areas, the primary sampling unit was the mauza, while in urban areas, it was the mahalla. Because the primary sampling units in the IMPS were selected with probability proportional to size from the 1991 Census frame, the units for the BDHS were sub-selected from the IMPS with equal probability so as to retain the overall probability proportional to size. A total of 316 primary sampling units were utilized for the BDHS (30 in SMAs, 42 in municipalities, and 244 in rural areas). In order to highlight changes in survey indicators over time, the 1996-97 BDHS utilized the same sample points (though not necessarily the same households) that were selected for the 1993-94 BDHS, except for 12 additional sample points in the new division of Sylhet. Fieldwork in three sample points was not possible (one in Dhaka Cantonment and two in the Chittagong Hill Tracts), so a total of 313 points were covered.

Since one objective of the BDHS is to provide separate estimates for each division as well as for urban and rural areas separately, it was necessary to increase the sampling rate for Barisal and Sylhet Divisions and for municipalities relative to the other divisions, SMAs and rural areas. Thus, the BDHS sample is not self-weighting and weighting factors have been applied to the data in this report.

Mitra and Associates conducted a household listing operation in all the sample points from 15 September to 15 December 1996. A systematic sample of 9,099 households was then selected from these lists. Every second household was selected for the men's survey, meaning that, in addition to interviewing all ever-married women age 10-49, interviewers also interviewed all currently married men age 15-59. It was expected that the sample would yield interviews with approximately 10,000 ever-married women age 10-49 and 3,000 currently married men age 15-59.

Note: See detailed in APPENDIX A of the survey report.

Mode of data collection

Face-to-face

Research instrument

Four types of questionnaires were used for the BDHS: a Household Questionnaire, a Women's Questionnaire, a Men' s Questionnaire and a Community Questionnaire. The contents of these questionnaires were based on the DHS Model A Questionnaire, which is designed for use in countries with relatively high levels of contraceptive use. These model questionnaires were adapted for use in Bangladesh during a series of meetings with a small Technical Task Force that consisted of representatives from NIPORT, Mitra and Associates, USAID/Bangladesh, the International Centre for Diarrhoeal Disease Research, Bangladesh (ICDDR,B), Population Council/Dhaka, and Macro International Inc (see Appendix D for a list of members). Draft questionnaires were then circulated to other interested groups and were reviewed by the BDHS Technical Review Committee (see Appendix D for list of members). The questionnaires were developed in English and then translated into and printed in Bangla (see Appendix E for final version in English).

The Household Questionnaire was used to list all the usual members and visitors in the selected households. Some basic information was collected on the characteristics of each person listed, including his/her age, sex, education, and relationship to the head of the household. The main purpose of the Household Questionnaire was to identify women and men who were eligible for the individual interview. In addition, information was collected about the dwelling itself, such as the source of water, type of toilet facilities, materials used to construct the house, and ownership of various consumer goods.

The Women's Questionnaire was used to collect information from ever-married women age 10-49. These women were asked questions on the following topics: - Background characteristics (age, education, religion, etc.), - Reproductive history, - Knowledge and use of family planning methods, - Antenatal and delivery care, - Breastfeeding and weaning practices, - Vaccinations and health of children under age five, - Marriage, - Fertility preferences, - Husband's background and respondent's work, - Knowledge of AIDS, - Height and weight of children under age five and their mothers.

The Men's Questionnaire was used to interview currently married men age 15-59. It was similar to that for women except that it omitted the sections on reproductive history, antenatal and delivery care, breastfeeding, vaccinations, and height and weight. The Community Questionnaire was completed for each sample point and included questions about the existence in the community of income-generating activities and other development organizations and the availability of health and family planning services.

Response rate

A total of 9,099 households were selected for the sample, of which 8,682 were successfully interviewed. The shortfall is primarily due to dwellings that were vacant or in which the inhabitants had left for an extended period at the time they were visited by the interviewing teams. Of the 8,762 households occupied, 99 percent were successfully interviewed. In these households, 9,335 women were identified as eligible for the individual interview (i.e., ever-married and age 10-49) and interviews were completed for 9,127 or 98 percent of them. In the half of the households that were selected for inclusion in the men's survey, 3,611 eligible ever-married men age 15-59 were identified, of whom 3,346 or 93 percent were interviewed.

The principal reason for non-response among eligible women and men was the failure to find them at home despite repeated visits to the household. The refusal rate was low.

Note: See summarized response rates by residence (urban/rural) in Table 1.1 of the survey report.

Sampling error estimates

The estimates from a sample survey are affected by two types of errors: (1) non-sampling errors, and (2) sampling errors. Non-sampling errors are the results of mistakes made in implementing data collection and data processing, such as failure to locate and interview the correct household, misunderstanding of the questions on the part of either the interviewer or the respondent, and data entry errors. Although numerous efforts were made during the implementation of the BDHS to minimize this type of error, non-sampling errors are impossible to avoid and difficult to evaluate statistically.

Sampling errors, on the other hand, can be evaluated statistically. The sample of respondents selected in the BDHS is only one of many samples that could have been selected from the same population, using the same design and expected size. Each of these samples would yield results that differ somewhat from the results of the actual sample selected. Sampling errors are a measure of the variability between all possible samples. Although the degree of variability is not known exactly, it can be estimated from the survey results.

A sampling error is usually measured in terms of the standard error for a particular statistic (mean, percentage, etc.), which is the square root of the variance. The standard error can be used to calculate confidence intervals within which the true value for the population can reasonably be assumed to fall. For example, for any given statistic calculated from a sample survey, the value of that statistic will fall within a range of plus or minus two times the standard error of that statistic in 95 percent of all possible samples of identical size and design.

If the sample of respondents had been selected as a simple random sample, it would have been possible to use straightforward formulas for calculating sampling errors. However, the BDHS sample is the result of a two-stage stratified design, and, consequently, it was necessary to use more complex formulae. The computer software used to calculate sampling errors for the BDHS is the ISSA Sampling Error Module. This module used the Taylor

The Urban Household Sample of the 1860 United States Census was designed to supplement the Bateman-Foust rural sample with observations from urban areas. The sample covers both northern and southern towns and cities and permits examination of female occupations and labor force participation rates. Information on individuals includes occupation, city of residence, age, sex, race, dollar value of real and personal property owned, whether American or foreign born, and literacy. The second release of this collection adds nine constructed variables, including several weight variables, collapsed occupation, ICPSR state code, region, and unique internal family and household identifier numbers.

Population: County: Age 65 and Above: Zhejiang data was reported at 4.201 Person th in 2023. This records an increase from the previous number of 4.078 Person th for 2022. Population: County: Age 65 and Above: Zhejiang data is updated yearly, averaging 2.643 Person th from Dec 1997 (Median) to 2023, with 27 observations. The data reached an all-time high of 3,755.490 Person th in 2020 and a record low of 2.109 Person th in 2012. Population: County: Age 65 and Above: Zhejiang data remains active status in CEIC and is reported by National Bureau of Statistics. The data is categorized under China Premium Database’s Socio-Demographic – Table CN.GA: Population: Sample Survey: By Age and Region: Rural.

Supporting documentation on code lists, subject definitions, data accuracy, and statistical testing can be found on the American Community Survey website in the Data and Documentation section...Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, it is the Census Bureau''s Population Estimates Program that produces and disseminates the official estimates of the population for the nation, states, counties, cities and towns and estimates of housing units for states and counties..Explanation of Symbols:An ''**'' entry in the margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate..An ''-'' entry in the estimate column indicates that either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution..An ''-'' following a median estimate means the median falls in the lowest interval of an open-ended distribution..An ''+'' following a median estimate means the median falls in the upper interval of an open-ended distribution..An ''***'' entry in the margin of error column indicates that the median falls in the lowest interval or upper interval of an open-ended distribution. A statistical test is not appropriate..An ''*****'' entry in the margin of error column indicates that the estimate is controlled. A statistical test for sampling variability is not appropriate. .An ''N'' entry in the estimate and margin of error columns indicates that data for this geographic area cannot be displayed because the number of sample cases is too small..An ''(X)'' means that the estimate is not applicable or not available..Estimates of urban and rural population, housing units, and characteristics reflect boundaries of urban areas defined based on Census 2000 data. Boundaries for urban areas have not been updated since Census 2000. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..While the 2012 American Community Survey (ACS) data generally reflect the December 2009 Office of Management and Budget (OMB) definitions of metropolitan and micropolitan statistical areas; in certain instances the names, codes, and boundaries of the principal cities shown in ACS tables may differ from the OMB definitions due to differences in the effective dates of the geographic entities..Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted roughly as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables..Source: U.S. Census Bureau, 2012 American Community Survey

Abstract

The main purpose of a Household Income and Expenditure Survey (HIES) was to present high quality and representative national household data on income and expenditure in order to update Consumer Price Index (CPI), improve statistics on National Accounts and measure poverty within the country.

The main objectives of this survey - update the weight of each expenditure item (from COICOP) and obtain weights for the revision of the Consumer Price Index (CPI) for Funafuti - provide data on the household sectors contribution to the National Accounts - design the structure of consumption for food secutiry - To provide information on the nature and distribution of household income, expenditure and food consumption patterns household living standard useful for planning purposes - To provide information on economic activity of men and women to study gender issues - To generate the income distribution for poverty analysis

The 2010 Household Income and Expenditure Survey (HIES) is the third HIES that was conducted by the Central Statistics Division since Tuvalu gained political independence in 1978.

This survey deals mostly with expenditure and income on the cash side and non cash side (gift, home production). Moreover, a lot of information are collected:

at a household level: - goods possession - description of the dwelling - water tank capacity - fruits and vegetables in the garden - livestock

at an individual level: - education level - employment - health

Geographic coverage

National Coverage: Funafuti and /Outer islands.

Analysis unit

• Household level
• Individual level

Universe

The scope of the 2010 Household Income and Expenditure Survey (HIES) was all occupied households in Tuvalu. Households are the sampling unit, defined as a group of people (related or not) who pool their money, and cook and eat together. It is not the physical structure (dwelling) in which people live. HIES covered all persons who were considered to be usual residents of private dwellings (must have been living in Tuvalu for a period of 12-months, or have intention to live in Tuvalu for a period of 12-months in order to be included in the survey). Usual residents who are temporary away are included as well (e.g., for work or a holiday).

All the private household are included in the sampling frame. In each household selected, the current resident are surveyed, and people who are usual resident but are currently away (work, health, holydays reasons, or border student for example. If the household had been residing in Tuvalu for less than one year: - but intend to reside more than 12 months => he is included - do not intend to reside more than 12 months => out of scope.

Kind of data

Sample survey data [ssd]

Sampling procedure

The Tuvalu 2010 Household Income and Expenditure Survey (HIES) outputs breakdowns at the domain level which is Funafuti and Outer Islands. To achieve this, and to match the budget constraint, a third of the households were selected in both domains. It was decided that 33% (one third) sample was sufficient to achieve suitable levels of accuracy for key estimates in the survey. So the sample selection was spread proportionally across all the islands except Niulakita as it was considered too small. The selection method used is the simple random survey, meaning that within each domain households were directly selected from the population frame (which was the updated 2009 household listing). All islands were included in the selection except Niulakita that was excluded due to its remoteness, and size.

For selection purposes, in the outer island domain, each island was treated as a separate strata and independent samples were selected from each (one third). The strategy used was to list each dwelling on the island by their geographical position and run a systematic skip through the list to achieve the 33% sample. This approach assured that the sample would be spread out across each island as much as possible and thus more representative.

Population and sample counts of dwellings by islands for 2010 HIES Islands: -Nanumea: Population: 123; sample: 41 -Nanumaga: Population: 117; sample: 39 -Niutao: Population: 138; sample: 46 -Nui: Population: 141; sample: 47 -Vaitupu: Population: 298; sample: 100 -Nukufetau: Population: 141; sample: 47 -Nukulaelae: Population: 78; sample: 26 -Funafuti: Population: 791; sample: 254 -TOTAL: Population: 1827; sample: 600.

Mode of data collection

Face-to-face [f2f]

Research instrument

3 forms were used. Each question is writen in English and translated in Tuvaluan on the same version of the questionnaire. The questionnaire was highly based on the previous one (2004 survey).

Household Schedule This questionnaire, to be completed by interviewers, is used to collect information about the household composition, living conditions and is also the main form for collecting expenditure on goods and services purchased infrequently.

• composition of the household and demographic profile of each members
• dwelling information
• dwelling expenditure
• transport expenditure
• education expenditure
• health expenditure
• land and property expenditure
• household furnishing
• home appliances
• cultural and social payments
• holydays/travel costs
• Loans and saving
• clothing
• other major expenditure items

Individual Schedule There will be two individual schedules: - health and education - labor force (individual aged 15 and above) - employment activity and income (individual aged 15 and above): wages and salaries working own business agriculture and livestock fishing income from handicraft income from gambling small scale activies jobs in the last 12 months other income childreen income tobacco and alcohol use other activities seafarer

Diary (one diary per week, on a 2 weeks period, 2 diaries per household were required) The diaries are used to record all household expenditure and consumption over the two week diary keeping period. The diaries are to be filled in by the household members, with the assistance from interviewers when necessary. - All kind of expenses - Home production - food and drink (eaten by the household, given away, sold) - Goods taken from own business (consumed, given away) - Monetary gift (given away, received, winning from gambling) - Non monetary gift (given away, received, winning from gambling).

Cleaning operations

Consistency of the data: - each questionnaire was checked by the supervisor during and after the collection - before data entry, all the questionnaire were coded - the CSPRo data entry system included inconsistency checks which allow the National Statistics Office staff to point some errors and to correct them with imputation estimation from their own knowledge (no time for double entry), 4 data entry operators. 1. presence of all the form for each household 2. consistency of data within the questionnaire

at this stage, all the errors were corrected on the questionnaire and on the data entry system in the meantime.

• after data entry, the extreme amount of each questionnaire where selected in order to check their consistency. at this stage, all the inconsistency were corrected by imputation on CSPRO editing.

Response rate

The final response rates for the survey was very pleasing with an average rate of 97 per cent across all islands selected. The response rates were derived by dividing the number of fully responding households by the number of selected households in scope of the survey which weren't vacant.

Response rates for Tuvalu 2010 Household Income and Expenditure Survey (HIES): - Nanumea 100% - Nanumaga 100% - Niutao 98% - Nui 100% - Vaitupu 99% - Nukufetau 89% - Nukulaelae 100% - Funafuti 96%

As can be seen in the table, four of the islands managed a 100 per cent response, whereas only Nukufetau had a response rate of less than 90 per cent.

Further explanation of response rates can be located in the external resource entitled Tuvalu 2010 HIES Report Table 1.2.

Sampling error estimates

The quality of the results can be found in the report provided in this documentation.

Geographic coverage

National coverage

Analysis unit

households/individuals

Kind of data

survey

Frequency of data collection

Quarterly

Sampling procedure

Sample size: