This is a geographic dataset of the Master Development Plans (MDP). A MDP is required for any development of two or more phases. The agreement includes the location and widths of proposed streets, lots, blocks, floodplains and easement information.

The Digital Geologic-GIS Map of San Antonio Missions National Historical Park and Vicinity, Texas is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (saan_geology.gdb), a 2.) Open Geospatial Consortium (OGC) geopackage, and 3.) 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (saan_geology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (saan_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). The OGC geopackage is supported with a QGIS project (.qgz) file. Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) A GIS readme file (saan_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (saan_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (saan_geology_metadata_faq.pdf). Please read the saan_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. Google Earth software is available for free at: https://www.google.com/earth/versions/. QGIS software is available for free at: https://www.qgis.org/en/site/. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: Texas Bureau of Economic Geology, University of Texas at Austin and Texas Water Development Board. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (saan_geology_metadata.txt or saan_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:250,000 and United States National Map Accuracy Standards features are within (horizontally) 127 meters or 416.7 feet of their actual _location as presented by this dataset. Users of this data should thus not assume the _location of features is exactly where they are portrayed in Google Earth, ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

Preliminary Development Plan Review (PDPR) and Preliminary Plan Review (PPR) meetings offer opportunities for the owner and/or owner’s agent(s) to meet with Development Services staff to discuss future development projects. These meetings will assist the owner and/or design team to identify items that need to be addressed or modified before the development plans are submitted to the City for review.

description: The Digital Geologic Map of San Antonio Missions National Historical Park and vicinity, Texas is composed of GIS data layers complete with ArcMap 9.3 layer (.LYR) files, two ancillary GIS tables, a Map PDF document with ancillary map text, figures and tables, a FGDC metadata record and a 9.3 ArcMap (.MXD) Document that displays the digital map in 9.3 ArcGIS. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) funded program that is administered by the NPS Geologic Resources Division (GRD). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: Texas Water Development Board and University of Texas at Austin, Bureau of Economic Geology. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation sections(s) of this metadata record (saan_metadata.txt; available at http://nrdata.nps.gov/saan/nrdata/geology/gis/saan_metadata.xml). All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.1. (available at: http://science.nature.nps.gov/im/inventory/geology/GeologyGISDataModel.cfm). The GIS data is available as a 9.3 personal geodatabase (saan_geology.mdb), and as shapefile (.SHP) and DBASEIV (.DBF) table files. The GIS data projection is NAD83, UTM Zone 14N. The data is within the area of interest of San Antonio Missions National Historical Park.; abstract: The Digital Geologic Map of San Antonio Missions National Historical Park and vicinity, Texas is composed of GIS data layers complete with ArcMap 9.3 layer (.LYR) files, two ancillary GIS tables, a Map PDF document with ancillary map text, figures and tables, a FGDC metadata record and a 9.3 ArcMap (.MXD) Document that displays the digital map in 9.3 ArcGIS. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) funded program that is administered by the NPS Geologic Resources Division (GRD). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: Texas Water Development Board and University of Texas at Austin, Bureau of Economic Geology. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation sections(s) of this metadata record (saan_metadata.txt; available at http://nrdata.nps.gov/saan/nrdata/geology/gis/saan_metadata.xml). All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.1. (available at: http://science.nature.nps.gov/im/inventory/geology/GeologyGISDataModel.cfm). The GIS data is available as a 9.3 personal geodatabase (saan_geology.mdb), and as shapefile (.SHP) and DBASEIV (.DBF) table files. The GIS data projection is NAD83, UTM Zone 14N. The data is within the area of interest of San Antonio Missions National Historical Park.

© Planning and Community Development Department, Comprehensive Division Updated per Ordinance 2015-01-15-0020, Boundary Adjustment of approx. 1,906.12 Acres (Government Cayon) Updated per Ordinance 2014-11-06-0861, Boundary Adjustment of approx. 36.266 Acres. Updated per Ordinance 2014-09-04-0658 Boundary Adjustment of approx. 1.73 Acres from the City of Live Oak to the City of San Antonio. Updated per Ordinance 2014-09-04-0657 Boundary Adjustment of approx. 31.81 acres from the City of Shavano park to the City of San Antonio and approx. 6.24 acres from the City of San Antonio to Shavano Park.

This layer is sourced from qagis.sanantonio.gov.

As per UDC Section 35-673, Low Impact Development (LID) is required for properties that are within River Improvement Overlay (RIO) Districts 1, 2, 4, 5, 6 or 7 and are directly adjacent to the San Antonio River or San Pedro Creek. LID design and construction shall be in accordance with UDC Section 35-210. These exhibits are intended to illustrate the limits of the mandatory LID areas. Subdivision of tracts within or adjacent to the mandatory LID areas may result in modification to the mandatory LID area boundary. Contact the Transportation & Capital Improvements (TCI) Storm Water Engineering Review Team for questions regarding the limits of mandatory LID areas and for guidance on LID design.

Neighborhood, Community, Perimeter and Strategic Implementation Plan boundaries

The City annexes territory to: Apply zoning and development standards, including environmental protection; Create efficiency in service delivery, particularly for public safety services; Maximize the return on the City’s investment in infrastructure and business incentives; Protect and expand the tax base; and/or Provide municipal services beyond those available in rural areas.

ADMMR map collection: St. Anthony Mining & Development Co. Ltd. Topographic Map; 1 in. to 100 feet; 34 x 49 in.

On May 6, 2017, voters approved Proposition 6 for the City’s 2017-2022 Bond Program, authorizing the city to issue bonds in the amount of $20 million to acquire real property within the City Council approved 12 Neighborhood Improvement Areas. The Neighborhood Improvements Bond funds will be used to facilitate private sector and/or non-profit development of single-family, multi-family or mixed-use affordable/workforce housing consistent with the 2017 Urban Renewal Plan. This program is designed to serve low-to-moderate income working families with a required minimum of half of the housing units serving families earning 80% of the Area Median Income or less, allowing these families to eliminate the cost-burden of today’s housing and rental prices.

Hurricane Harvey made landfall near Rockport, Texas on August 25 as a category 4 hurricane with wind gusts exceeding 150 miles per hour. As Harvey moved inland the forward motion of the storm slowed down and produced tremendous rainfall amounts to southeastern Texas and southwestern Louisiana. Historic flooding occurred in Texas and Louisiana as a result of the widespread, heavy rainfall over an 8-day period in Louisiana in August and September 2017. Following the storm event, U.S. Geological Survey (USGS) hydrographers recovered and documented 2,123 high-water marks in Texas, noting location and height of the water above land surface. Many of these high-water marks were used to create flood-inundation maps for selected communities of Texas that experienced flooding in August and September, 2017.
The mapped area boundary, flood inundation extents, depth rasters, and coastal surge layer were created to provide an estimated extent of flood inundation in Coastal basins including East and West Matagorda Bay Subbasins, East and West San Antonio Bay Subbasins, and Aransas Bay Subbasin, Texas. The mapped area of the Coastal basins were separated into three sections based on the availability and location of high-water marks. The maps of the eastern part of the East Matagorda Bay Subbasin include a 17-mi reach of Peyton Creek and a 16-mi reach of Big Boggy Creek, and flood-inundation map for 6-mi reach of Little Boggy Creek in Matagorda County. The maps of the western part of East Matagorda Bay Subbasin include a 13.5-mi reach of West Carancahua Creek, 14.5-mi reach of East Carancahua Creek, and 9.6-mi reach of Keller Creek within Matagorda, Jackson, and Calhoun Counties. The maps of the middle part of the East Matagorda Bay Subbasin are for a 21-mi reach of the Tres Palacios River within Matagorda County. These geospatial data include the following items: 1. bnd_emb1, bnd_emb2, and bnd_tres_palacios; shapefiles containing the polygon showing the mapped area boundary for the Coastal basins flood maps, 2. hwm_emb_1, hwm_emb2, and hwm_tres_palacios; shapefiles containing high-water mark points used for inundation maps, 3. polygon_emb1, polygon_emb_2, and polygon_tres_palacios; shapefiles containing mapped extent of flood inundation for the Coastal basins, derived from the water-surface elevation surveyed at high-water marks, 4. depth_emb1, depth_emb2, and depth_tres; raster files for the flood depths derived from the water-surface elevation surveyed at high-water marks, and 5. coastal_surge.lyr; a layer file generated from the depth raster depicting water height above ground recorded at the high-water marks. The upstream and downstream mapped area extent is limited to the upstream-most and downstream-most high-water mark locations. In areas of uncertainty of flood extent, the mapped area boundary is lined up with the flood inundation polygon extent. The mapped area boundary polygon was used to extract the final flood inundation polygon and depth raster from the water-surface elevation raster file. Depth raster files were created using the "Topo to Raster" tool in ArcMap (ESRI, 2012). The HWM elevation data from the USGS Short-tern Network (STN) was used to create the flood water-surface raster file (U.S. Geological Survey [USGS], 2018, Short-Term Network Data Portal: USGS flood information web page, accessed February 13, 2018, at https://water.usgs.gov/floods/FEV.). The water-surface raster was the basis for the creation of the final flood inundation polygon and depth layer to support the development of flood inundation map for the Federal Emergency Management Agency's (FEMA) response and recovery operations.

Point locations of churches, cemeteries, post offices, libraries, recreational facilities, and the like within the 16-county NCTCOG region. Data can be viewed in the Development Monitoring in North Central Texas web mapping application. For the program overview, visit NCTCOG Development Monitoring Program Overview.pdf

Landmarks are resources that have been officially recognized by the City of San Antonio for their outstanding historical, cultural, architectural, or archaeological significance. There are currently over 1,500 designated landmarks in the city. In the past, landmark designation identified Historic Exceptional (HE) and Historic Significant (HS) landmarks. 2010 amendments to the City's Unified Development Code (UDC) include the consolidation of the two landmark designations into one Historic Landmark (HL) designation. Those resources previously designated as historic landmarks prior to the UDC Amendments of June 24, 2010, will continue to bear the words "historic, exceptional" (HE) or "historic, significant" (HS) in their zoning designation.