A geographic representation of the County boundary created from fund numbers which are provided by the County Auditor/Controller's Property Tax Services (PTS) Division.

The California State Water Resources Control Board (State Water Board) and the nine Regional Water Quality Control Boards (Regional Water Boards), collectively known as the California Water Boards (Water Boards), are dedicated to a single vision: abundant clean water for human uses and environmental protection to sustain California’s future. Under the federal Clean Water Act (CWA) and the state’s pioneering Porter-Cologne Water Quality Control Act, the State and Regional Water Boards have regulatory responsibility for protecting the water quality of nearly 1.6 million acres of lakes, 1.3 million acres of bays and estuaries, 211,000 miles of rivers and streams, and about 1,100 miles of California coastline.The State Water Board is located in Sacramento. There are nine Regional Water Boards, the boundaries of which are generally based on watersheds, also known as hydrologic areas. The nine Regional Water Boards are referred to by specific names, which are: (1) North Coast, (2) San Francisco Bay, (3) Central Coast, (4) Los Angeles, (5) Central Valley, (6) Lahontan, (7) Colorado River Basin, (8) Santa Ana, and (9) San Diego. Due to their size, and/or geographic spread, the Central Valley Board has three offices and the Lahontan Board has two offices. In addition, the Drinking Water Program has fourteen District offices spread throughout the state.This map service shows the jurisdictional boundaries of the nine Regional Water Boards and the locations of their administrative offices. The official legal definitions of Regional Water Quality Control Board jurisdictions may be found in the Section 13200 of the California Water Code.For more information, please visit the California Water Boards website at https://www.waterboards.ca.gov.

WARNING: This is a pre-release dataset and its fields names and data structures are subject to change. It should be considered pre-release until the end of 2024. Expected changes:Metadata is missing or incomplete for some layers at this time and will be continuously improved.We expect to update this layer roughly in line with CDTFA at some point, but will increase the update cadence over time as we are able to automate the final pieces of the process.This dataset is continuously updated as the source data from CDTFA is updated, as often as many times a month. If you require unchanging point-in-time data, export a copy for your own use rather than using the service directly in your applications.PurposeCounty and incorporated place (city) boundaries along with third party identifiers used to join in external data. Boundaries are from the authoritative source the California Department of Tax and Fee Administration (CDTFA), altered to show the counties as one polygon. This layer displays the city polygons on top of the County polygons so the area isn"t interrupted. The GEOID attribute information is added from the US Census. GEOID is based on merged State and County FIPS codes for the Counties. Abbreviations for Counties and Cities were added from Caltrans Division of Local Assistance (DLA) data. Place Type was populated with information extracted from the Census. Names and IDs from the US Board on Geographic Names (BGN), the authoritative source of place names as published in the Geographic Name Information System (GNIS), are attached as well. Finally, the coastline is used to separate coastal buffers from the land-based portions of jurisdictions. This feature layer is for public use.Related LayersThis dataset is part of a grouping of many datasets:Cities: Only the city boundaries and attributes, without any unincorporated areasWith Coastal BuffersWithout Coastal BuffersCounties: Full county boundaries and attributes, including all cities within as a single polygonWith Coastal BuffersWithout Coastal BuffersCities and Full Counties: A merge of the other two layers, so polygons overlap within city boundaries. Some customers require this behavior, so we provide it as a separate service.With Coastal Buffers (this dataset)Without Coastal BuffersPlace AbbreviationsUnincorporated Areas (Coming Soon)Census Designated Places (Coming Soon)Cartographic CoastlinePolygonLine source (Coming Soon)Working with Coastal BuffersThe dataset you are currently viewing includes the coastal buffers for cities and counties that have them in the authoritative source data from CDTFA. In the versions where they are included, they remain as a second polygon on cities or counties that have them, with all the same identifiers, and a value in the COASTAL field indicating if it"s an ocean or a bay buffer. If you wish to have a single polygon per jurisdiction that includes the coastal buffers, you can run a Dissolve on the version that has the coastal buffers on all the fields except COASTAL, Area_SqMi, Shape_Area, and Shape_Length to get a version with the correct identifiers.Point of ContactCalifornia Department of Technology, Office of Digital Services, odsdataservices@state.ca.govField and Abbreviation DefinitionsCOPRI: county number followed by the 3-digit city primary number used in the Board of Equalization"s 6-digit tax rate area numbering systemPlace Name: CDTFA incorporated (city) or county nameCounty: CDTFA county name. For counties, this will be the name of the polygon itself. For cities, it is the name of the county the city polygon is within.Legal Place Name: Board on Geographic Names authorized nomenclature for area names published in the Geographic Name Information SystemGNIS_ID: The numeric identifier from the Board on Geographic Names that can be used to join these boundaries to other datasets utilizing this identifier.GEOID: numeric geographic identifiers from the US Census Bureau Place Type: Board on Geographic Names authorized nomenclature for boundary type published in the Geographic Name Information SystemPlace Abbr: CalTrans Division of Local Assistance abbreviations of incorporated area namesCNTY Abbr: CalTrans Division of Local Assistance abbreviations of county namesArea_SqMi: The area of the administrative unit (city or county) in square miles, calculated in EPSG 3310 California Teale Albers.COASTAL: Indicates if the polygon is a coastal buffer. Null for land polygons. Additional values include "ocean" and "bay".GlobalID: While all of the layers we provide in this dataset include a GlobalID field with unique values, we do not recommend you make any use of it. The GlobalID field exists to support offline sync, but is not persistent, so data keyed to it will be orphaned at our next update. Use one of the other persistent identifiers, such as GNIS_ID or GEOID instead.AccuracyCDTFA"s source data notes the following about accuracy:City boundary changes and county boundary line adjustments filed with the Board of Equalization per Government Code 54900. This GIS layer contains the boundaries of the unincorporated county and incorporated cities within the state of California. The initial dataset was created in March of 2015 and was based on the State Board of Equalization tax rate area boundaries. As of April 1, 2024, the maintenance of this dataset is provided by the California Department of Tax and Fee Administration for the purpose of determining sales and use tax rates. The boundaries are continuously being revised to align with aerial imagery when areas of conflict are discovered between the original boundary provided by the California State Board of Equalization and the boundary made publicly available by local, state, and federal government. Some differences may occur between actual recorded boundaries and the boundaries used for sales and use tax purposes. The boundaries in this map are representations of taxing jurisdictions for the purpose of determining sales and use tax rates and should not be used to determine precise city or county boundary line locations. COUNTY = county name; CITY = city name or unincorporated territory; COPRI = county number followed by the 3-digit city primary number used in the California State Board of Equalization"s 6-digit tax rate area numbering system (for the purpose of this map, unincorporated areas are assigned 000 to indicate that the area is not within a city).Boundary ProcessingThese data make a structural change from the source data. While the full boundaries provided by CDTFA include coastal buffers of varying sizes, many users need boundaries to end at the shoreline of the ocean or a bay. As a result, after examining existing city and county boundary layers, these datasets provide a coastline cut generally along the ocean facing coastline. For county boundaries in northern California, the cut runs near the Golden Gate Bridge, while for cities, we cut along the bay shoreline and into the edge of the Delta at the boundaries of Solano, Contra Costa, and Sacramento counties.In the services linked above, the versions that include the coastal buffers contain them as a second (or third) polygon for the city or county, with the value in the COASTAL field set to whether it"s a bay or ocean polygon. These can be processed back into a single polygon by dissolving on all the fields you wish to keep, since the attributes, other than the COASTAL field and geometry attributes (like areas) remain the same between the polygons for this purpose.SliversIn cases where a city or county"s boundary ends near a coastline, our coastline data may cross back and forth many times while roughly paralleling the jurisdiction"s boundary, resulting in many polygon slivers. We post-process the data to remove these slivers using a city/county boundary priority algorithm. That is, when the data run parallel to each other, we discard the coastline cut and keep the CDTFA-provided boundary, even if it extends into the ocean a small amount. This processing supports consistent boundaries for Fort Bragg, Point Arena, San Francisco, Pacifica, Half Moon Bay, and Capitola, in addition to others. More information on this algorithm will be provided soon.Coastline CaveatsSome cities have buffers extending into water bodies that we do not cut at the shoreline. These include South Lake Tahoe and Folsom, which extend into neighboring lakes, and San Diego and surrounding cities that extend into San Diego Bay, which our shoreline encloses. If you have feedback on the exclusion of these items, or others, from the shoreline cuts, please reach out using the contact information above.Offline UseThis service is fully enabled for sync and export using Esri Field Maps or other similar tools. Importantly, the GlobalID field exists only to support that use case and should not be used for any other purpose (see note in field descriptions).Updates and Date of ProcessingConcurrent with CDTFA updates, approximately every two weeks, Last Processed: 12/17/2024 by Nick Santos using code path at https://github.com/CDT-ODS-DevSecOps/cdt-ods-gis-city-county/ at commit 0bf269d24464c14c9cf4f7dea876aa562984db63. It incorporates updates from CDTFA as of 12/12/2024. Future updates will include improvements to metadata and update frequency.

This EnviroAtlas dataset shows the San Diego, CA EnviroAtlas community boundary. It represents the outside edge of all the block groups included in the EnviroAtlas Community. This dataset was produced the US EPA to support research and online mapping activities related to EnviroAtlas. EnviroAtlas (https://www.epa.gov/enviroatlas) allows the user to interact with a web-based, easy-to-use, mapping application to view and analyze multiple ecosystem services for the contiguous United States. The dataset is available as downloadable data (https://edg.epa.gov/data/Public/ORD/EnviroAtlas) or as an EnviroAtlas map service. Additional descriptive information about each attribute in this dataset can be found in its associated EnviroAtlas Fact Sheet (https://www.epa.gov/enviroatlas/enviroatlas-fact-sheets).

© Planning and Community Development Department, Comprehensive Division Updated per Ordinance 2015-01-15-0020, Boundary Adjustment of approx. 1,906.12 Acres (Government Cayon) Updated per Ordinance 2014-11-06-0861, Boundary Adjustment of approx. 36.266 Acres. Updated per Ordinance 2014-09-04-0658 Boundary Adjustment of approx. 1.73 Acres from the City of Live Oak to the City of San Antonio. Updated per Ordinance 2014-09-04-0657 Boundary Adjustment of approx. 31.81 acres from the City of Shavano park to the City of San Antonio and approx. 6.24 acres from the City of San Antonio to Shavano Park.

This layer is sourced from qagis.sanantonio.gov.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Face refers to the areal (polygon) topological primitives that make up MTDB. A face is bounded by one or more edges; its boundary includes only the edges that separate it from other faces, not any interior edges contained within the area of the face. The Topological Faces Shapefile contains the attributes of each topological primitive face. Each face has a unique topological face identifier (TFID) value. Each face in the shapefile includes the key geographic area codes for all geographic areas for which the Census Bureau tabulates data for both the 2020 Census and the annual estimates and surveys. The geometries of each of these geographic areas can then be built by dissolving the face geometries on the appropriate key geographic area codes in the Topological Faces Shapefile.

Tax rate area boundaries and related data based on changes filed with the Board of Equalization per Government Code 54900 for the specified assessment roll year. The data included in this map is maintained by the California State Board of Equalization and may differ slightly from the data published by other agencies. BOE_TRA layer = tax rate area boundaries and the assigned TRA number for the specified assessment roll year; BOE_Changes layer = boundary changes filed with the Board of Equalization for the specified assessment roll year; Data Table (C##_YYYY) = tax rate area numbers and related districts for the specified assessment roll year

Tax rate area boundaries and related data based on changes filed with the Board of Equalization per Government Code 54900 for the specified assessment roll year. The data included in this map is maintained by the California State Board of Equalization and may differ slightly from the data published by other agencies. BOE_TRA layer = tax rate area boundaries and the assigned TRA number for the specified assessment roll year; BOE_Changes layer = boundary changes filed with the Board of Equalization for the specified assessment roll year; Data Table (C##_YYYY) = tax rate area numbers and related districts for the specified assessment roll year

Polygon features representing the COSA Boundary in the city of San Antonio.

Historical districts contain multiple properties and/or objects that share historical significance. The City’s Historical Resources Board can establish a district if the contributing resources meet one of six criteria. For more information, read the nomination guidelines.

Geospatial data about City of San Antonio, Texas Boundaries. Export to CAD, GIS, PDF, CSV and access via API.

Tax rate area boundaries and related data based on changes filed with the Board of Equalization per Government Code 54900 for the specified assessment roll year. The data included in this map is maintained by the California State Board of Equalization and may differ slightly from the data published by other agencies. BOE_TRA layer = tax rate area boundaries and the assigned TRA number for the specified assessment roll year; BOE_Changes layer = boundary changes filed with the Board of Equalization for the specified assessment roll year; Data Table (C##_YYYY) = tax rate area numbers and related districts for the specified assessment roll year

Polygon versions of the terrestrial CZB with a generalized shoreline (USGS 1:24,000 Quadrangle shoreline heads up digitized at 1:3000) and with a more detailed shoreline that includes most bays and estuaries. It was digitized within AutoCAD from the Commission's certified Coastal Zone Boundary hard copy maps. The files were then imported into ArcView, and merged together following Commission jurisdictional boundaries (North Coast, North Central Coast, Central Coast, South Central Coast, South Coast, and San Diego). The line work was originally georeferenced to the USGS Digital Raster Graphics (DRG) in Teale Albers projection. The data was later refined to the DRGs in UTM, Zones 10 and 11, NAD 83 meters. This file is intended to be displayed upon the UTM DRGs as a base map. In addition, the data was later attributed to help explain the basis of the mapped Coastal Zone.

Tax rate area boundaries and related data based on changes filed with the Board of Equalization per Government Code 54900 for the specified assessment roll year. The data included in this map is maintained by the California State Board of Equalization and may differ slightly from the data published by other agencies. BOE_TRA layer = tax rate area boundaries and the assigned TRA number for the specified assessment roll year; BOE_Changes layer = boundary changes filed with the Board of Equalization for the specified assessment roll year; Data Table (C##_YYYY) = tax rate area numbers and related districts for the specified assessment roll year

This is a graphical polygon dataset depicting the polygon boundaries of the ten City of San Antonio City Council Districts. 2012 Redistricting Plan precleared by D.O.J. under Section 5 of the Voting Rights Act 11/27/2012. Updated per Limited Purpose Annexation Ordinance 2014-11-06-0861, of 36.266 Acres. Ordinance 2014-01-09-0001 of Areas 1 - 4.Updated per Ordinance 2015-01-15-0020, Boundary Adjustment of approx. 1,906.12 Acres (Government Cayon)

Tax rate area boundaries and related data based on changes filed with the Board of Equalization per Government Code 54900 for the specified assessment roll year. The data included in this map is maintained by the California State Board of Equalization and may differ slightly from the data published by other agencies. BOE_TRA layer = tax rate area boundaries and the assigned TRA number for the specified assessment roll year; BOE_Changes layer = boundary changes filed with the Board of Equalization for the specified assessment roll year; Data Table (C##_YYYY) = tax rate area numbers and related districts for the specified assessment roll year

This dataset comprises road centerlines for all roads in San Diego County. Road centerline information is collected from recorded documents (subdivision and parcel maps) and information provided by local jurisidictions (Cities in San Diego County, County of San Diego). Road names and address ranges are as designated by the official address coordinator for each jurisidcition. Jurisdictional information is created from spatial overlays with other data layers (e.g. Jurisdiction, Census Tract).The layer contains both public and private roads. Not all roads are shown on official, recorded documents. Centerlines may be included for dedicated public roads even if they have not been constructed. Public road names are the official names as maintained by the addressing authority for the jurisdiction in which the road is located. Official road names may not match the common or local name used to identify the road (e.g. State Route 94 is the official name of certain road segments commonly referred to as Campo Road).Private roads are either named or unnamed. Named private roads are as shown on official recorded documents or as directed by the addressing authority for the jurisdiction in which the road is located. Unnamed private roads are included where requested by the local jurisidiction or by SanGIS JPA members (primarily emergency response dispatch agencies). Roads are comprised of road segments that are individually identified by a unique, and persistent, ID (ROADSEGID). Roads segments are terminated where they intersect with each other, at jurisdictional boundaries (i.e. city limits), certain census tract and law beat boundaries, at locations where road names change, and at other locations as required by SanGIS JPA members. Each road segment terminates at an intersection point that can be found in the ROADS_INTERSECTION layer.Road centerlines do not necessarily follow the centerline of dedicated rights-of-way (ROW). Centerlines are adjusted as needed to fit the actual, constructed roadway. However, many road centerline segments are created intially based on record documents prior to construction and may not have been updated to meet as-built locations. Please notify SanGIS if the actual location differs from that shown. See the SanGIS website for contact information and reporting problems (http://www.sangis.org/contact/problem.html).Note, the road speeds in this layer are based on road segment class and were published as part of an agreement between San Diego Fire-Rescue, the San Diego County Sheriff's Department, and SanGIS. The average speed is based on heavy fire vehicles and may not represent the posted speed limit.

This is a graphical polygon dataset depicting the polygon boundaries of Cities within Bexar County Texas and Surrounding Counties. (excluding San Antonio)Updated per Ordinance No. 564, No. 565, and No. 567 on April 9, 2015 extending the Helotes City limits with the annexation of four parcels of vacant property known as Bricewood Subdivision. Updated previously per Resolution No 2012-007-R From the City of Somerset .Updated per ordinance 2014-09-04-0657 (Savano Park ETJ ONLY release)Updated per ordinance 2014-09-04-0658 (Live Oak City Limit release)Updated per ordinance 2014-08-21-0614 (Fair Oaks Ranch ETJ ONLY release.

The SanGIS data set includes an extensive collection of GIS maps that are available to the public.

 Application Data Included:

 1. Public Safety: Crime Mapping & Analysis, Computer Aided Dispatch,
 Emergency Response Planning

 2. Planning & Development: Specific Plans, Vegetation Mapping, Zoning,
 Geologic Hazards, Codes Enforcement

 3. Facilities Management: Water and Waste Water Utilities, Street
 Lighting, Storm Drains, Pavement Management

 4. Subdivision Mapping: Basemap Maintenance, Parcel Mapping, Survey
 Control, Orthophotography

 5. Route Management: Water Meter Readers, Trash & Recycling Routes

 6. Decision Support & Analysis: Facility Siting, Airport Noise, Slope
 Analysis, Demographics, Economic Development

 SanGIS was created in July, 1997, as a Joint Powers Agreement (JPA)
 between the City and County of San Diego. After 13 years of working
 together on data and application development, the City and County
 decided to formalize their partnership in GIS by creating the SanGIS
 JPA. Finding that access to correct and current geographic data was
 considered more important than application development to County and
 City departments, SanGIS focuses on ensuring geographic data is
 maintained and accessible.

 SanGIS Mission:

 To maintain and promote the use of a regional geographic data
 warehouse for the San Diego area and to facilitate the development of
 shared geographic data and automated systems which use that data.

 SanGIS Goals:

 1. To ensure geographic data currency and integrity.

 2. To provide cost effective access to geographic data to member
 agencies, subscribers and the public.

 3. To generate revenue from the sale of geographic data products to
 reduce the cost of map maintenance to member agencies.

 Data Collection:

 SanGIS data was created or obtained from several sources. Some of our
 data is licensed; some data was created from tabular digital files;
 some data was digitized from paper maps; and other data was entered
 using coordinate geometry tools.

 Updating the Data:

 Responsibility for the maintenance of the over 200 geographic data
 layers is distributed to City and County departments based on several
 factors such as who has the source documents, who has the greatest
 need for the data, and who is held accountable for this data as part
 of their city-wide or county-wide duties. Most basemap maintenance is
 completed by SanGIS staff. SanGIS is also responsible for coordinating
 with other data maintainers to ensure currency and accuracy for all
 participants.

 Data Coverage:

 All of the SanGIS geographic data is within San Diego County
 only. Much of our data covers the entire County of San Diego but some
 is only for the City of San Diego.

 [Summary provided by SanGIS]

The Vegetation Map of Cañada de San Vicente (CSV), San Diego County, was created by the California Department of Fish and Game (DFG) Vegetation and Mapping Program (VegCAMP). CSV, formerly known as Monte Vista Ranch, was acquired in April 2009 by DFG and is currently not open to the public as the management plan is not complete. The map study area boundary is based on the DFG Lands layer that was published in April, 2011 and includes 4888 acres of land. This includes 115 acres of private land located in the northeast corner of the map that was considered an area of interest (AOI) before purchase by DFG. The map is based on field data from 38 vegetation Rapid Assessment surveys (RAs), 111 reconnaissance points, and 118 verification points that were conducted between April 2009 and January 2012. The rapid assessment surveys were collected as part of a comprehensive effort to create the Vegetation Classification Manual for Western San Diego County (Sproul et al., 2011). A total of 1265 RAs and 18 relevés were conducted for this larger project, all of which were analyzed together using cluster analysis to develop the final vegetation classification. The CSV area was delineated by vegetation type and each polygon contains attributes for hardwood tree, shrub and herb cover, roadedness, development, clearing, and heterogeneity. Of 545 woodland and shrubland polygons that were delineated, 516 were mapped to the association level and 29 to the alliance level (due to uncertainty in the association). Of 46 herbaceous polygons that were delineated, 36 were mapped to the group or macrogroup level and 8 were mapped to association. Four polygons were mapped as urban or agriculture. The classification and map follow the National Vegetation Classification Standard (NVCS) and Federal Geographic Data Committee (FGDC) standard and State of California Vegetation and Mapping Standards. The minimum mapping area unit (MMU) is one acre, though occasionally, vegetation is mapped below MMU for special types including wetland, riparian, and native herbaceous and when it was possible to delineate smaller stands with a high degree of certainty (e.g., with available field data). In total, about 45 percent of the polygons were supported by field data points and 55 percent were based on photointerpretation.