Public Safety Layer containing EMS, Fire, Health Stations, Hospitals and Police

PLSS Townships and Sections dataset current as of 2008. Public Land Survey square-mile section boundaries within Sedgwick County. Layer was developed interactively by GIS staff. Primary attribues include section, township, and range identifiers, and x-y coordinates, and Public Safety (ortho) map numbers..

Election layer is a conflation of all electable districts within Sedgwick County that all other districts are derived from. Primary attributes include Precinct, City Code, CouDistNO, BOCCDistNO, SenDistNO, etc...

Police Districts dataset current as of 2008. Sedgwick County Sheriff Office 8 beat patrol areas. This cover is maintained interactively by GIS staff. Primary attributes include beat number. Published to scbeat8.shp. Supports the E911 CAD map roll..

The US Census Bureau defines Population as "All people, male and female, child and adult, living in a given geographic area.". 2020 Census block groups for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted from the 2020 State of Kansas Census Block Group shapefile provided by the State of Kansas GIS Data Access and Support Center (https://www.kansasgis.org/index.cfm).Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number. For example, blocks 3001, 3002, 3003… 3999 in census tract 1210.02 belong to Block Group 3. Due to boundary and feature changes that occur throughout the decade, current block groups do not always maintain these same block number to block group relationships. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the identification string (GEOID20) for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block identification strings are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain between 600 and 3,000 people. Local participants delineated most block groups as part of the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant.A block group usually covers a contiguous area. Each census tract contains at least one block group and block groups are uniquely numbered within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian, Alaska Native, and Native Hawaiian areas.Block groups have a valid range of 0 through 9. Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.

1990 Census blocks for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted based upon County FIPS code 173 which correlates to Sedgwick County Kansas.US Census Defines Census Block as the following: A census block is the smallest geographic unit used by the United States Census Bureau for tabulation of 100-percent data (data collected from all houses, rather than a sample of houses).Census blocks are grouped into block groups, which are grouped into census tracts. There are on average about 39 blocks per block group. Blocks typically have a four-digit number; the first number indicates which block group the block is in. For example, census block 3019 would be in block group 3.[2]Blocks are typically bounded by roads and highways, town/city/county/state boundaries, creeks and rivers, etc. In cities, a census block may correspond to a city block, but in rural areas where there are fewer roads, blocks may be delimited by other features such as political boundaries, rivers and other natural features, as well as parks and similar facilities, etc. The population of a census block varies greatly. As of the 2010 census, there were 4,871,270 blocks with a reported population of zero,[3] while a block that is entirely occupied by an apartment complex might have several hundred inhabitants.Census blocks covering the entire country were introduced with the 1990 census. Before that, back to the 1940 census, only selected areas were divided into blocks.

This web map was created to support reconnaissance of shoreline wetlands around Cheney Lake in Reno, Kingman, and Sedgwick Counties, Kansas.

The US Census Bureau defines Housing Units as "A house, an apartment, a mobile home or trailer, a group of rooms, or a single room occupied as separate living quarters, or if vacant, intended for occupancy as separate living quarters. Separate living quarters are those in which the occupants live separately from any other individuals in the building and which have direct access from outside the building or through a common hall. For vacant units, the criteria of separateness and direct access are applied to the intended occupants whenever possible.". 2020 Census block groups for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted from the 2020 State of Kansas Census Block Group shapefile provided by the State of Kansas GIS Data Access and Support Center (https://www.kansasgis.org/index.cfm).Change in Population and Housing for the Sedgwick County area from 2010 - 2020 based upon US Census. Census Blocks from 2010 were spatially joined to Census Block Groups from 2020 to compare the population and housing figures. This is not a product of the US Census Bureau and is only available through City of Wichita GIS. Please refer to Census Block Groups for 2010 and 2020 for verification of all data Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number. For example, blocks 3001, 3002, 3003… 3999 in census tract 1210.02 belong to Block Group 3. Due to boundary and feature changes that occur throughout the decade, current block groups do not always maintain these same block number to block group relationships. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the identification string (GEOID20) for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block identification strings are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain between 600 and 3,000 people. Local participants delineated most block groups as part of the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant.A block group usually covers a contiguous area. Each census tract contains at least one block group and block groups are uniquely numbered within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian, Alaska Native, and Native Hawaiian areas.Block groups have a valid range of 0 through 9. Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.

The US Census Bureau defines Vacant Housing Units as "A housing unit is vacant if no one is living in it at the time of enumeration, unless its occupants are only temporarily absent. Units temporarily occupied at the time of enumeration entirely by people who have a usual residence elsewhere are also classified as vacant.". Vacant housing percentage was calculated based upon total vacant housing units within the census block group divided the total housing units of the same census block group.2020 Census block groups for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted from the 2020 State of Kansas Census Block Group shapefile provided by the State of Kansas GIS Data Access and Support Center (https://www.kansasgis.org/index.cfm).Change in Population and Housing for the Sedgwick County area from 2010 - 2020 based upon US Census. Census Blocks from 2010 were spatially joined to Census Block Groups from 2020 to compare the population and housing figures. This is not a product of the US Census Bureau and is only available through City of Wichita GIS. Please refer to Census Block Groups for 2010 and 2020 for verification of all data Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number. For example, blocks 3001, 3002, 3003… 3999 in census tract 1210.02 belong to Block Group 3. Due to boundary and feature changes that occur throughout the decade, current block groups do not always maintain these same block number to block group relationships. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the identification string (GEOID20) for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block identification strings are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain between 600 and 3,000 people. Local participants delineated most block groups as part of the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant.A block group usually covers a contiguous area. Each census tract contains at least one block group and block groups are uniquely numbered within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian, Alaska Native, and Native Hawaiian areas.Block groups have a valid range of 0 through 9. Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.

The US Census Bureau defines American Indian or Alaskan Native as "A person having origins in any of the original peoples of North and South America (including Central America) and who maintains tribal affiliation or community attachment. This category includes people who indicate their race as "American Indian or Alaska Native" or report entries such as Navajo, Blackfeet, Inupiat, Yup'ik, or Central American Indian groups or South American Indian groups.Respondents who identified themselves as "American Indian or Alaska Native" were asked to report their enrolled or principal tribe. Therefore, tribal data in tabulations reflect the written entries reported on the questionnaires. Some of the entries (for example, Metlakatla Indian Community and Umatilla) represent reservations or a confederation of tribes on a reservation. The information on tribe is based on self-identification and, therefore, does not reflect any designation of federally or state-recognized tribe. The information for the 2010 Decennial Census was derived from the American Indian and Alaska Native Tribal Classification List for Decennial Census 2000 and updated from 2002 to 2009 based on the annual Federal Register notice entitled "Indian Entities Recognized and Eligible to Receive Services From the United States Bureau of Indian Affairs," Department of the Interior, Bureau of Indian Affairs, issued by OMB, and through consultation with American Indian and Alaska Native communities and leaders.". 2020 Census block groups for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted from the 2020 State of Kansas Census Block Group shapefile provided by the State of Kansas GIS Data Access and Support Center (https://www.kansasgis.org/index.cfm).Change in Population and Housing for the Sedgwick County area from 2010 - 2020 based upon US Census. Census Blocks from 2010 were spatially joined to Census Block Groups from 2020 to compare the population and housing figures. This is not a product of the US Census Bureau and is only available through City of Wichita GIS. Please refer to Census Block Groups for 2010 and 2020 for verification of all data Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number. For example, blocks 3001, 3002, 3003… 3999 in census tract 1210.02 belong to Block Group 3. Due to boundary and feature changes that occur throughout the decade, current block groups do not always maintain these same block number to block group relationships. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the identification string (GEOID20) for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block identification strings are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain between 600 and 3,000 people. Local participants delineated most block groups as part of the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant.A block group usually covers a contiguous area. Each census tract contains at least one block group and block groups are uniquely numbered within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian, Alaska Native, and Native Hawaiian areas.Block groups have a valid range of 0 through 9. Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.

The US Census Bureau defines Other Ethnic Origin or Race as "This definition is used only for American Samoa, the Commonwealth of the Northern Mariana Islands, and Guam (U.S. Island Areas). Includes all other responses not included in the "Hispanic or Latino," "White," "Black or African American," "American Indian or Alaska Native," "Asian," and "Native Hawaiian or Other Pacific Islander" ethnic origin or race categories. Respondents reporting entries such as "multiracial," "mixed," or "interracial" in response to the ethnic origin or race question are included in this category.". Other Race population percentage was calculated based upon total Other Race population within the census block group divided the total population of the same census block group. 2020 Census block groups for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted from the 2020 State of Kansas Census Block Group shapefile provided by the State of Kansas GIS Data Access and Support Center (https://www.kansasgis.org/index.cfm).Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number. For example, blocks 3001, 3002, 3003… 3999 in census tract 1210.02 belong to Block Group 3. Due to boundary and feature changes that occur throughout the decade, current block groups do not always maintain these same block number to block group relationships. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the identification string (GEOID20) for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block identification strings are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain between 600 and 3,000 people. Local participants delineated most block groups as part of the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant.A block group usually covers a contiguous area. Each census tract contains at least one block group and block groups are uniquely numbered within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian, Alaska Native, and Native Hawaiian areas.Block groups have a valid range of 0 through 9. Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.

The US Census Bureau defines Two or More Races as "People may choose to provide two or more races either by checking two or more race response check boxes, by providing multiple responses, or by some combination of check boxes and other responses. The race response categories shown on the questionnaire are collapsed into the five minimum race groups identified by OMB and the Census Bureau's "Some Other Race" category. For data product purposes, "Two or More Races" refers to combinations of two or more of the following race categories: White, Black or African American, American Indian or Alaska Native, Asian, Native Hawaiian or Other Pacific Islander, Some Other Race.". 2020 Census block groups for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted from the 2020 State of Kansas Census Block Group shapefile provided by the State of Kansas GIS Data Access and Support Center (https://www.kansasgis.org/index.cfm).Change in Population and Housing for the Sedgwick County area from 2010 - 2020 based upon US Census. Census Blocks from 2010 were spatially joined to Census Block Groups from 2020 to compare the population and housing figures. This is not a product of the US Census Bureau and is only available through City of Wichita GIS. Please refer to Census Block Groups for 2010 and 2020 for verification of all data Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number. For example, blocks 3001, 3002, 3003… 3999 in census tract 1210.02 belong to Block Group 3. Due to boundary and feature changes that occur throughout the decade, current block groups do not always maintain these same block number to block group relationships. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the identification string (GEOID20) for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block identification strings are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain between 600 and 3,000 people. Local participants delineated most block groups as part of the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant.A block group usually covers a contiguous area. Each census tract contains at least one block group and block groups are uniquely numbered within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian, Alaska Native, and Native Hawaiian areas.Block groups have a valid range of 0 through 9. Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.