The US Census Bureau defines Housing Units as "A house, an apartment, a mobile home or trailer, a group of rooms, or a single room occupied as separate living quarters, or if vacant, intended for occupancy as separate living quarters. Separate living quarters are those in which the occupants live separately from any other individuals in the building and which have direct access from outside the building or through a common hall. For vacant units, the criteria of separateness and direct access are applied to the intended occupants whenever possible.". 2020 Census block groups for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted from the 2020 State of Kansas Census Block Group shapefile provided by the State of Kansas GIS Data Access and Support Center (https://www.kansasgis.org/index.cfm).Change in Population and Housing for the Sedgwick County area from 2010 - 2020 based upon US Census. Census Blocks from 2010 were spatially joined to Census Block Groups from 2020 to compare the population and housing figures. This is not a product of the US Census Bureau and is only available through City of Wichita GIS. Please refer to Census Block Groups for 2010 and 2020 for verification of all data Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number. For example, blocks 3001, 3002, 3003… 3999 in census tract 1210.02 belong to Block Group 3. Due to boundary and feature changes that occur throughout the decade, current block groups do not always maintain these same block number to block group relationships. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the identification string (GEOID20) for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block identification strings are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain between 600 and 3,000 people. Local participants delineated most block groups as part of the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant.A block group usually covers a contiguous area. Each census tract contains at least one block group and block groups are uniquely numbered within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian, Alaska Native, and Native Hawaiian areas.Block groups have a valid range of 0 through 9. Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.

NG911 Roads layer, Airports and Railroads in Sedgwick County Kansas

The US Census Bureau defines Population as "All people, male and female, child and adult, living in a given geographic area.". 2020 Census block groups for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted from the 2020 State of Kansas Census Block Group shapefile provided by the State of Kansas GIS Data Access and Support Center (https://www.kansasgis.org/index.cfm).Change in Population and Housing for the Sedgwick County area from 2010 - 2020 based upon US Census. Census Blocks from 2010 were spatially joined to Census Block Groups from 2020 to compare the population and housing figures. This is not a product of the US Census Bureau and is only available through City of Wichita GIS. Please refer to Census Block Groups for 2010 and 2020 for verification of all data Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number. For example, blocks 3001, 3002, 3003… 3999 in census tract 1210.02 belong to Block Group 3. Due to boundary and feature changes that occur throughout the decade, current block groups do not always maintain these same block number to block group relationships. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the identification string (GEOID20) for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block identification strings are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain between 600 and 3,000 people. Local participants delineated most block groups as part of the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant.A block group usually covers a contiguous area. Each census tract contains at least one block group and block groups are uniquely numbered within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian, Alaska Native, and Native Hawaiian areas.Block groups have a valid range of 0 through 9. Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.

Easements and setbacks are legal concepts in land use and property rights, common in real estate and urban planning:- Easements grant the legal right to use someone else's land for specific purposes (e.g., utilities, access, or public use) without transferring ownership.- Setbacks are zoning regulations specifying the minimum distance between a building and property boundaries (front, side, and rear). They ensure safety, aesthetics, and orderly development, varying by location and zoning. Setbacks are typically measured in feet or meters from the property line to the building.

The US Census Bureau defines Occupied Housing Units as "A housing unit is classified as occupied if it is the usual place of residence of the person or group of people living in it at the time of enumeration.". Occupied housing percentage was calculated based upon total occupied housing units within the census block group divided the total housing units of the same census block group.2020 Census block groups for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted from the 2020 State of Kansas Census Block Group shapefile provided by the State of Kansas GIS Data Access and Support Center (https://www.kansasgis.org/index.cfm).Change in Population and Housing for the Sedgwick County area from 2010 - 2020 based upon US Census. Census Blocks from 2010 were spatially joined to Census Block Groups from 2020 to compare the population and housing figures. This is not a product of the US Census Bureau and is only available through City of Wichita GIS. Please refer to Census Block Groups for 2010 and 2020 for verification of all data Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number. For example, blocks 3001, 3002, 3003… 3999 in census tract 1210.02 belong to Block Group 3. Due to boundary and feature changes that occur throughout the decade, current block groups do not always maintain these same block number to block group relationships. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the identification string (GEOID20) for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block identification strings are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain between 600 and 3,000 people. Local participants delineated most block groups as part of the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant.A block group usually covers a contiguous area. Each census tract contains at least one block group and block groups are uniquely numbered within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian, Alaska Native, and Native Hawaiian areas.Block groups have a valid range of 0 through 9. Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.

The US Census Bureau defines Other Ethnic Origin or Race as "This definition is used only for American Samoa, the Commonwealth of the Northern Mariana Islands, and Guam (U.S. Island Areas). Includes all other responses not included in the "Hispanic or Latino," "White," "Black or African American," "American Indian or Alaska Native," "Asian," and "Native Hawaiian or Other Pacific Islander" ethnic origin or race categories. Respondents reporting entries such as "multiracial," "mixed," or "interracial" in response to the ethnic origin or race question are included in this category.". 2020 Census block groups for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted from the 2020 State of Kansas Census Block Group shapefile provided by the State of Kansas GIS Data Access and Support Center (https://www.kansasgis.org/index.cfm).Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number. For example, blocks 3001, 3002, 3003… 3999 in census tract 1210.02 belong to Block Group 3. Due to boundary and feature changes that occur throughout the decade, current block groups do not always maintain these same block number to block group relationships. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the identification string (GEOID20) for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block identification strings are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain between 600 and 3,000 people. Local participants delineated most block groups as part of the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant.A block group usually covers a contiguous area. Each census tract contains at least one block group and block groups are uniquely numbered within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian, Alaska Native, and Native Hawaiian areas.Block groups have a valid range of 0 through 9. Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.

The US Census Bureau defines Native Hawaiian Other Pacific Islander as "A person having origins in any of the original peoples of Hawaii, Guam, Samoa, or other Pacific Islands. This includes people who reported detailed Pacific Islander responses such as: Fijian, Guamanian or Chamorro, Marshallese, Native Hawaiian, Other Micronesian, Other Pacific Islander, not specified Other Polynesian, Samoan, Tongan.". 2020 Census block groups for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted from the 2020 State of Kansas Census Block Group shapefile provided by the State of Kansas GIS Data Access and Support Center (https://www.kansasgis.org/index.cfm).Change in Population and Housing for the Sedgwick County area from 2010 - 2020 based upon US Census. Census Blocks from 2010 were spatially joined to Census Block Groups from 2020 to compare the population and housing figures. This is not a product of the US Census Bureau and is only available through City of Wichita GIS. Please refer to Census Block Groups for 2010 and 2020 for verification of all data Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number. For example, blocks 3001, 3002, 3003… 3999 in census tract 1210.02 belong to Block Group 3. Due to boundary and feature changes that occur throughout the decade, current block groups do not always maintain these same block number to block group relationships. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the identification string (GEOID20) for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block identification strings are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain between 600 and 3,000 people. Local participants delineated most block groups as part of the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant.A block group usually covers a contiguous area. Each census tract contains at least one block group and block groups are uniquely numbered within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian, Alaska Native, and Native Hawaiian areas.Block groups have a valid range of 0 through 9. Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.

The US Census Bureau defines Vacant Housing Units as "A housing unit is vacant if no one is living in it at the time of enumeration, unless its occupants are only temporarily absent. Units temporarily occupied at the time of enumeration entirely by people who have a usual residence elsewhere are also classified as vacant.". Vacant housing percentage was calculated based upon total vacant housing units within the census block group divided the total housing units of the same census block group.2020 Census block groups for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted from the 2020 State of Kansas Census Block Group shapefile provided by the State of Kansas GIS Data Access and Support Center (https://www.kansasgis.org/index.cfm).Change in Population and Housing for the Sedgwick County area from 2010 - 2020 based upon US Census. Census Blocks from 2010 were spatially joined to Census Block Groups from 2020 to compare the population and housing figures. This is not a product of the US Census Bureau and is only available through City of Wichita GIS. Please refer to Census Block Groups for 2010 and 2020 for verification of all data Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number. For example, blocks 3001, 3002, 3003… 3999 in census tract 1210.02 belong to Block Group 3. Due to boundary and feature changes that occur throughout the decade, current block groups do not always maintain these same block number to block group relationships. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the identification string (GEOID20) for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block identification strings are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain between 600 and 3,000 people. Local participants delineated most block groups as part of the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant.A block group usually covers a contiguous area. Each census tract contains at least one block group and block groups are uniquely numbered within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian, Alaska Native, and Native Hawaiian areas.Block groups have a valid range of 0 through 9. Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.

The US Census Bureau defines Two or More Races as "People may choose to provide two or more races either by checking two or more race response check boxes, by providing multiple responses, or by some combination of check boxes and other responses. The race response categories shown on the questionnaire are collapsed into the five minimum race groups identified by OMB and the Census Bureau's "Some Other Race" category. For data product purposes, "Two or More Races" refers to combinations of two or more of the following race categories: White, Black or African American, American Indian or Alaska Native, Asian, Native Hawaiian or Other Pacific Islander, Some Other Race.". Two or More Races population percentage was calculated based upon total Two or More Races population within the census block group divided the total population of the same census block group. 2020 Census block groups for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted from the 2020 State of Kansas Census Block Group shapefile provided by the State of Kansas GIS Data Access and Support Center (https://www.kansasgis.org/index.cfm).Change in Population and Housing for the Sedgwick County area from 2010 - 2020 based upon US Census. Census Blocks from 2010 were spatially joined to Census Block Groups from 2020 to compare the population and housing figures. This is not a product of the US Census Bureau and is only available through City of Wichita GIS. Please refer to Census Block Groups for 2010 and 2020 for verification of all data Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number. For example, blocks 3001, 3002, 3003… 3999 in census tract 1210.02 belong to Block Group 3. Due to boundary and feature changes that occur throughout the decade, current block groups do not always maintain these same block number to block group relationships. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the identification string (GEOID20) for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block identification strings are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain between 600 and 3,000 people. Local participants delineated most block groups as part of the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant.A block group usually covers a contiguous area. Each census tract contains at least one block group and block groups are uniquely numbered within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian, Alaska Native, and Native Hawaiian areas.Block groups have a valid range of 0 through 9. Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.

The US Census Bureau defines White as "A person having origins in any of the original peoples of Europe, the Middle East, or North Africa. It includes people who indicate their race as "White" or report entries such as Irish, German, Italian, Lebanese, Arab, Moroccan, or Caucasian.". 2020 Census block groups for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted from the 2020 State of Kansas Census Block Group shapefile provided by the State of Kansas GIS Data Access and Support Center (https://www.kansasgis.org/index.cfm).Change in Population and Housing for the Sedgwick County area from 2010 - 2020 based upon US Census. Census Blocks from 2010 were spatially joined to Census Block Groups from 2020 to compare the population and housing figures. This is not a product of the US Census Bureau and is only available through City of Wichita GIS. Please refer to Census Block Groups for 2010 and 2020 for verification of all data Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number. For example, blocks 3001, 3002, 3003… 3999 in census tract 1210.02 belong to Block Group 3. Due to boundary and feature changes that occur throughout the decade, current block groups do not always maintain these same block number to block group relationships. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the identification string (GEOID20) for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block identification strings are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain between 600 and 3,000 people. Local participants delineated most block groups as part of the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant.A block group usually covers a contiguous area. Each census tract contains at least one block group and block groups are uniquely numbered within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian, Alaska Native, and Native Hawaiian areas.Block groups have a valid range of 0 through 9. Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.

The US Census Bureau defines Black or African American as "A person having origins in any of the Black racial groups of Africa. It includes people who indicate their race as "Black or African American," or report entries such as African American, Kenyan, Nigerian, or Haitian.". Black population percentage was calculated based upon total Black or African Americans within the census block group divided the total population of the same census block group. 2020 Census block groups for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted from the 2020 State of Kansas Census Block Group shapefile provided by the State of Kansas GIS Data Access and Support Center (https://www.kansasgis.org/index.cfm).Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number. For example, blocks 3001, 3002, 3003… 3999 in census tract 1210.02 belong to Block Group 3. Due to boundary and feature changes that occur throughout the decade, current block groups do not always maintain these same block number to block group relationships. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the identification string (GEOID20) for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block identification strings are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain between 600 and 3,000 people. Local participants delineated most block groups as part of the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant.A block group usually covers a contiguous area. Each census tract contains at least one block group and block groups are uniquely numbered within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian, Alaska Native, and Native Hawaiian areas.Block groups have a valid range of 0 through 9. Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.

The US Census Bureau defines Hispanic or Latino as "Hispanic or Latino refers to a person of Cuban, Mexican, Puerto Rican, South or Central American, or other Spanish culture or origin regardless of race. This includes people who reported detailed Hispanic or Latino groups such as: Mexican, Puerto Rican, Cuban, Dominican Republic, Costa Rican, Guatemalan, Honduran, Nicaraguan, Panamanian, Salvadoran, Other Central American, Argentinian, Bolivian, Chilean, Colombian, Ecuadorian, Paraguayan, Peruvian, Uruguayan, Venezuelan, Other South American, Spaniard, All other Hispanic or Latino." Hispanic Latino population percentage was calculated based upon total Hispanic Latino population within the census block group divided the total population of the same census block group. 2020 Census block groups for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted from the 2020 State of Kansas Census Block Group shapefile provided by the State of Kansas GIS Data Access and Support Center (https://www.kansasgis.org/index.cfm).Change in Population and Housing for the Sedgwick County area from 2010 - 2020 based upon US Census. Census Blocks from 2010 were spatially joined to Census Block Groups from 2020 to compare the population and housing figures. This is not a product of the US Census Bureau and is only available through City of Wichita GIS. Please refer to Census Block Groups for 2010 and 2020 for verification of all data Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number. For example, blocks 3001, 3002, 3003… 3999 in census tract 1210.02 belong to Block Group 3. Due to boundary and feature changes that occur throughout the decade, current block groups do not always maintain these same block number to block group relationships. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the identification string (GEOID20) for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block identification strings are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain between 600 and 3,000 people. Local participants delineated most block groups as part of the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant.A block group usually covers a contiguous area. Each census tract contains at least one block group and block groups are uniquely numbered within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian, Alaska Native, and Native Hawaiian areas.Block groups have a valid range of 0 through 9. Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.

The US Census Bureau defines Hispanic or Latino as "Hispanic or Latino refers to a person of Cuban, Mexican, Puerto Rican, South or Central American, or other Spanish culture or origin regardless of race. This includes people who reported detailed Hispanic or Latino groups such as: Mexican, Puerto Rican, Cuban, Dominican Republic, Costa Rican, Guatemalan, Honduran, Nicaraguan, Panamanian, Salvadoran, Other Central American, Argentinian, Bolivian, Chilean, Colombian, Ecuadorian, Paraguayan, Peruvian, Uruguayan, Venezuelan, Other South American, Spaniard, All other Hispanic or Latino." 2020 Census block groups for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted from the 2020 State of Kansas Census Block Group shapefile provided by the State of Kansas GIS Data Access and Support Center (https://www.kansasgis.org/index.cfm).Change in Population and Housing for the Sedgwick County area from 2010 - 2020 based upon US Census. Census Blocks from 2010 were spatially joined to Census Block Groups from 2020 to compare the population and housing figures. This is not a product of the US Census Bureau and is only available through City of Wichita GIS. Please refer to Census Block Groups for 2010 and 2020 for verification of all data Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number. For example, blocks 3001, 3002, 3003… 3999 in census tract 1210.02 belong to Block Group 3. Due to boundary and feature changes that occur throughout the decade, current block groups do not always maintain these same block number to block group relationships. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the identification string (GEOID20) for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block identification strings are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain between 600 and 3,000 people. Local participants delineated most block groups as part of the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant.A block group usually covers a contiguous area. Each census tract contains at least one block group and block groups are uniquely numbered within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian, Alaska Native, and Native Hawaiian areas.Block groups have a valid range of 0 through 9. Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.

The US Census Bureau defines Asian as "A person having origins in any of the original peoples of the Far East, Southeast Asia, or the Indian subcontinent, including, for example, Cambodia, China, India, Japan, Korea, Malaysia, Pakistan, the Philippine Islands, Thailand, and Vietnam. This includes people who reported detailed Asian responses such as: Indian, Bangladeshi, Bhutanese, Burmese, Cambodian, Chinese, Filipino, Hmong, Indonesian, Japanese, Korean, Laotian, Malaysian, Nepalese, Pakistani, Sri Lankan, Taiwanese, Thai, Vietnamese, Other Asian specified, Other Asian not specified.". 2020 Census block groups for the Wichita / Sedgwick County area, clipped to the county line. Features were extracted from the 2020 State of Kansas Census Block Group shapefile provided by the State of Kansas GIS Data Access and Support Center (https://www.kansasgis.org/index.cfm).Change in Population and Housing for the Sedgwick County area from 2010 - 2020 based upon US Census. Census Blocks from 2010 were spatially joined to Census Block Groups from 2020 to compare the population and housing figures. This is not a product of the US Census Bureau and is only available through City of Wichita GIS. Please refer to Census Block Groups for 2010 and 2020 for verification of all data Standard block groups are clusters of blocks within the same census tract that have the same first digit of their 4-character census block number. For example, blocks 3001, 3002, 3003… 3999 in census tract 1210.02 belong to Block Group 3. Due to boundary and feature changes that occur throughout the decade, current block groups do not always maintain these same block number to block group relationships. For example, block 3001 might move due to a change in the census tract boundary. Even if the block is no longer in block group 3, the block number (3001) will not change. However, the identification string (GEOID20) for that block, identifying block group 3, would remain the same in the attribute information in the TIGER/Line Shapefiles because block identification strings are always built using the decennial geographic codes.Block groups delineated for the 2020 Census generally contain between 600 and 3,000 people. Local participants delineated most block groups as part of the Census Bureau's Participant Statistical Areas Program (PSAP). The Census Bureau delineated block groups only where a local or tribal government declined to participate or where the Census Bureau could not identify a potential local participant.A block group usually covers a contiguous area. Each census tract contains at least one block group and block groups are uniquely numbered within census tract. Within the standard census geographic hierarchy, block groups never cross county or census tract boundaries, but may cross the boundaries of county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian, Alaska Native, and Native Hawaiian areas.Block groups have a valid range of 0 through 9. Block groups beginning with a zero generally are in coastal and Great Lakes water and territorial seas. Rather than extending a census tract boundary into the Great Lakes or out to the 3-mile territorial sea limit, the Census Bureau delineated some census tract boundaries along the shoreline or just offshore.