A. SUMMARY Medical provider confirmed COVID-19 cases and confirmed COVID-19 related deaths in San Francisco, CA aggregated by Census ZIP Code Tabulation Areas and normalized by 2018 American Community Survey (ACS) 5-year estimates for population data to calculate rate per 10,000 residents.

Cases and deaths are both mapped to the residence of the individual, not to where they were infected or died. For example, if one was infected in San Francisco at work but lives in the East Bay, those are not counted as SF Cases or if one dies in Zuckerberg San Francisco General but is from another county, that is also not counted in this dataset.

Dataset is cumulative and covers cases going back to March 2nd, 2020 when testing began. It is updated daily.

B. HOW THE DATASET IS CREATED Addresses from medical data are geocoded by the San Francisco Department of Public Health (SFDPH). Those addresses are spatially joined to the geographic areas. Counts are generated based on the number of address points that match each geographic area. The 2018 ACS estimates for population provided by the Census are used to create a rate which is equal to ([count] / [acs_population]) * 10000) representing the number of cases per 10,000 residents.

C. UPDATE PROCESS Geographic analysis is scripted by SFDPH staff and synced to this dataset each day.

D. HOW TO USE THIS DATASET Privacy rules in effect To protect privacy, certain rules are in effect: 1. Case counts greater than 0 and less than 10 are dropped - these will be null (blank) values 2. Cases dropped altogether for areas where acs_population < 1000

Rate suppression in effect where counts lower than 20 Rates are not calculated unless the case count is greater than or equal to 20. Rates are generally unstable at small numbers, so we avoid calculating them directly. We advise you to apply the same approach as this is best practice in epidemiology.

A note on Census ZIP Code Tabulation Areas (ZCTAs) ZIP Code Tabulation Areas are special boundaries created by the U.S. Census based on ZIP Codes developed by the USPS. They are not, however, the same thing. ZCTAs are polygonal representations of USPS ZIP Code service area routes. Read how the Census develops ZCTAs on their website.

This dataset is a filtered view of another dataset You can find a full dataset of cases and deaths summarized by this and other geographic areas.

E. CHANGE LOG

• 9/11/2023 - data on COVID-19 cases and deaths summarized by ZIP code tabulation area are no longer being updated. This data is currently through 9/6/2023 and will not include any new data after this date.

A. SUMMARY This dataset represents the COVID-19 vaccinations given to residents of San Francisco summarized by the geographic region of their residential address. All vaccines given to SF residents are included, no matter where the vaccination took place (the vaccine may have been administered in San Francisco or outside of San Francisco). Data provides counts for residents who have received at least one dose, residents who have completed a primary vaccine series, residents who have received one or two monovalent (not bivalent) booster doses, and residents who have received a bivalent booster dose. A primary vaccine series is complete after an individual has received all intended doses of the initial series. There are one, two, and three dose primary vaccine series. B. HOW THE DATASET IS CREATED Information on doses administered to those who live in San Francisco is from the California Immunization Registry (CAIR2), run by the California Department of Public Health (CDPH). The information on individuals’ residential addresses is recorded in CAIR and are self-reported at the time of vaccine administration. San Francisco Department of Public Health (SFDPH) then runs additional processes to spatially match each address to a geographical region. In order to estimate the percent of San Francisco residents vaccinated, we provide the 2016-2020 5-year American Community Survey (ACS) population estimates for each analysis neighborhood. C. UPDATE PROCESS Updated daily via automated process D. HOW TO USE THIS DATASET San Francisco population estimates for geographic regions can be found in a view based on the San Francisco Population and Demographic Census dataset. These population estimates are from the 2016-2020 5-year American Community Survey (ACS). This data is grouped by SF residents’ analysis neighborhoods of residence. To query counts of individuals vaccinated by analysis neighborhood, filter to "area_type" = ‘Analysis Neighborhood’, and "id" will contain the analysis neighborhood name. To query summarized counts of all vaccinated individuals in San Francisco and whether the San Francisco Department of Public Health (SFDPH) was able to match their residential address to a _location, filter to "area_type" = ‘Summary’. To count the number of individuals vaccinated (with any primary series dose), use the "count_vaccinated" column. To count the number of individuals vaccinated (with any primary series dose) by the San Francisco Department of Public Health (SFDPH), use the "count_vaccinated_by_dph" column. To count the number of individuals who have completed their primary vaccine series, use the "count_series_completed" column. To count the number of individuals who received one or two monovalent (not bivalent) boosters, use the "count_received_booster" and "count_received_2nd_booster" columns. To count the number of individuals who received at least one bivalent booster, use the "count_received_bivalent_booster" columns. E. ARCHIVED DATA A previous version of this dataset was archived on 10/27/2022. For historical purposes, you can access the archived dataset at the following link: ARCHIVED: COVID-19 Vaccines Given to San Franciscans by Geography F. CHANGE LOG 11/1/2023 - data on COVID-19 vaccinations given to SF residents by geography are no longer being updated. This data is currently through 10/31/2023 and will not include any new data after this date. 1/31/2023 - updated “acs_population” column to reflect the 2020 Census Bureau American Community Survey (ACS) San Francisco Population estimates. 1/31/2023 - implemented system updates to streamline and improve our geo-coded data, resulting in small shifts in our vaccination data by geography. 10/2

A. SUMMARY This dataset includes COVID-19 tests by resident neighborhood and specimen collection date (the day the test was collected). Specifically, this dataset includes tests of San Francisco residents who listed a San Francisco home address at the time of testing. These resident addresses were then geo-located and mapped to neighborhoods. The resident address associated with each test is hand-entered and susceptible to errors, therefore neighborhood data should be interpreted as an approximation, not a precise nor comprehensive total.

In recent months, about 5% of tests are missing addresses and therefore cannot be included in any neighborhood totals. In earlier months, more tests were missing address data. Because of this high percentage of tests missing resident address data, this neighborhood testing data for March, April, and May should be interpreted with caution (see below)

Percentage of tests missing address information, by month in 2020 Mar - 33.6% Apr - 25.9% May - 11.1% Jun - 7.2% Jul - 5.8% Aug - 5.4% Sep - 5.1% Oct (Oct 1-12) - 5.1%

To protect the privacy of residents, the City does not disclose the number of tests in neighborhoods with resident populations of fewer than 1,000 people. These neighborhoods are omitted from the data (they include Golden Gate Park, John McLaren Park, and Lands End).

Tests for residents that listed a Skilled Nursing Facility as their home address are not included in this neighborhood-level testing data. Skilled Nursing Facilities have required and repeated testing of residents, which would change neighborhood trends and not reflect the broader neighborhood's testing data.

This data was de-duplicated by individual and date, so if a person gets tested multiple times on different dates, all tests will be included in this dataset (on the day each test was collected).

The total number of positive test results is not equal to the total number of COVID-19 cases in San Francisco. During this investigation, some test results are found to be for persons living outside of San Francisco and some people in San Francisco may be tested multiple times (which is common). To see the number of new confirmed cases by neighborhood, reference this map: https://sf.gov/data/covid-19-case-maps#new-cases-maps

B. HOW THE DATASET IS CREATED COVID-19 laboratory test data is based on electronic laboratory test reports. Deduplication, quality assurance measures and other data verification processes maximize accuracy of laboratory test information. All testing data is then geo-coded by resident address. Then data is aggregated by analysis neighborhood and specimen collection date.

Data are prepared by close of business Monday through Saturday for public display.

C. UPDATE PROCESS Updates automatically at 05:00 Pacific Time each day. Redundant runs are scheduled at 07:00 and 09:00 in case of pipeline failure.

D. HOW TO USE THIS DATASET San Francisco population estimates for geographic regions can be found in a view based on the San Francisco Population and Demographic Census dataset. These population estimates are from the 2016-2020 5-year American Community Survey (ACS).

Due to the high degree of variation in the time needed to complete tests by different labs there is a delay in this reporting. On March 24 the Health Officer ordered all labs in the City to report complete COVID-19 testing information to the local and state health departments.

In order to track trends over time, a data user can analyze this data by "specimen_collection_date".

Calculating Percent Positivity: The positivity rate is the percentage of tests that return a positive result for COVID-19 (positive tests divided by the sum of positive and negative tests). Indeterminate results, which could not conclusively determine whether COVID-19 virus was present, are not included in the calculation of pe

On 6/28/2023, data on cases by vaccination status will be archived and will no longer update.

A. SUMMARY This dataset represents San Francisco COVID-19 positive confirmed cases by vaccination status over time, starting January 1, 2021. Cases are included on the date the positive test was collected (the specimen collection date). Cases are counted in three categories: (1) all cases; (2) unvaccinated cases; and (3) completed primary series cases.

1. All cases: Includes cases among all San Francisco residents regardless of vaccination status.

2. Unvaccinated cases: Cases are considered unvaccinated if their positive COVID-19 test was before receiving any vaccine. Cases that are not matched to a COVID-19 vaccination record are considered unvaccinated.

3. Completed primary series cases: Cases are considered completed primary series if their positive COVID-19 test was 14 days or more after they received their 2nd dose in a 2-dose COVID-19 series or the single dose of a 1-dose vaccine. These are also called “breakthrough cases.”

On September 12, 2021, a new case definition of COVID-19 was introduced that includes criteria for enumerating new infections after previous probable or confirmed infections (also known as reinfections). A reinfection is defined as a confirmed positive PCR lab test more than 90 days after a positive PCR or antigen test. The first reinfection case was identified on December 7, 2021.

Data is lagged by eight days, meaning the most recent specimen collection date included is eight days prior to today. All data updates daily as more information becomes available.

B. HOW THE DATASET IS CREATED Case information is based on confirmed positive laboratory tests reported to the City. The City then completes quality assurance and other data verification processes. Vaccination data comes from the California Immunization Registry (CAIR2). The California Department of Public Health runs CAIR2. Individual-level case and vaccination data are matched to identify cases by vaccination status in this dataset. Case records are matched to vaccine records using first name, last name, date of birth, phone number, and email address.

We include vaccination records from all nine Bay Area counties in order to improve matching rates. This allows us to identify breakthrough cases among people who moved to the City from other Bay Area counties after completing their vaccine series. Only cases among San Francisco residents are included.

C. UPDATE PROCESS Updates automatically at 08:00 AM Pacific Time each day.

D. HOW TO USE THIS DATASET Total San Francisco population estimates can be found in a view based on the San Francisco Population and Demographic Census dataset. These population estimates are from the 2016-2020 5-year American Community Survey (ACS). To identify total San Francisco population estimates, filter the view on “demographic_category_label” = “all ages”.

Population estimates by vaccination status are derived from our publicly reported vaccination counts, which can be found at COVID-19 Vaccinations Given to SF Residents Over Time.

The dataset includes new cases, 7-day average new cases, new case rates, 7-day average new case rates, percent of total cases, and 7-day average percent of total cases for each vaccination category.

New cases are the count of cases where the positive tests were collected on that specific specimen collection date. The 7-day rolling average shows the trend in new cases. The rolling average is calculated by averaging the new cases for a particular day with the prior 6 days.

New case rates are the count of new cases per 100,000 residents in each vaccination status group. The 7-day rolling average shows the trend in case rates. The rolling average is calculated by averaging the case rate for a part

A. SUMMARY This dataset includes San Francisco COVID-19 tests by race/ethnicity and by date. This dataset represents the daily count of tests collected, and the breakdown of test results (positive, negative, or indeterminate). Tests in this dataset include all those collected from persons who listed San Francisco as their home address at the time of testing. It also includes tests that were collected by San Francisco providers for persons who were missing a locating address. This dataset does not include tests for residents listing a locating address outside of San Francisco, even if they were tested in San Francisco.

The data were de-duplicated by individual and date, so if a person gets tested multiple times on different dates, all tests will be included in this dataset (on the day each test was collected). If a person tested multiple times on the same date, only one test is included from that date. When there are multiple tests on the same date, a positive result, if one exists, will always be selected as the record for the person. If a PCR and antigen test are taken on the same day, the PCR test will supersede. If a person tests multiple times on the same day and the results are all the same (e.g. all negative or all positive) then the first test done is selected as the record for the person.

The total number of positive test results is not equal to the total number of COVID-19 cases in San Francisco.

When a person gets tested for COVID-19, they may be asked to report information about themselves. One piece of information that might be requested is a person's race and ethnicity. These data are often incomplete in the laboratory and provider reports of the test results sent to the health department. The data can be missing or incomplete for several possible reasons:

• The person was not asked about their race and ethnicity.
• The person was asked, but refused to answer.
• The person answered, but the testing provider did not include the person's answers in the reports.
• The testing provider reported the person's answers in a format that could not be used by the health department.

For any of these reasons, a person's race/ethnicity will be recorded in the dataset as “Unknown.”

B. NOTE ON RACE/ETHNICITY The different values for Race/Ethnicity in this dataset are "Asian;" "Black or African American;" "Hispanic or Latino/a, all races;" "American Indian or Alaska Native;" "Native Hawaiian or Other Pacific Islander;" "White;" "Multi-racial;" "Other;" and “Unknown."

The Race/Ethnicity categorization increases data clarity by emulating the methodology used by the U.S. Census in the American Community Survey. Specifically, persons who identify as "Asian," "Black or African American," "American Indian or Alaska Native," "Native Hawaiian or Other Pacific Islander," "White," "Multi-racial," or "Other" do NOT include any person who identified as Hispanic/Latino at any time in their testing reports that either (1) identified them as SF residents or (2) as someone who tested without a locating address by an SF provider. All persons across all races who identify as Hispanic/Latino are recorded as “"Hispanic or Latino/a, all races." This categorization increases data accuracy by correcting the way “Other” persons were counted. Previously, when a person reported “Other” for Race/Ethnicity, they would be recorded “Unknown.” Under the new categorization, they are counted as “Other” and are distinct from “Unknown.”

If a person records their race/ethnicity as “Asian,” “Black or African American,” “American Indian or Alaska Native,” “Native Hawaiian or Other Pacific Islander,” “White,” or “Other” for their first COVID-19 test, then this data will not change—even if a different race/ethnicity is reported for this person for any future COVID-19 test. There are two exceptions to this rule. The first exception is if a person’s race/ethnicity value i

A. SUMMARY This dataset shows San Francisco COVID-19 deaths by population characteristics. This data may not be immediately available for recently reported deaths. Data updates as more information becomes available. Because of this, death totals may increase or decrease. Population characteristics are subgroups, or demographic cross-sections, like age, race, or gender. The City tracks how deaths have been distributed among different subgroups. This information can reveal trends and disparities among groups. B. HOW THE DATASET IS CREATED As of January 1, 2023, COVID-19 deaths are defined as persons who had COVID-19 listed as a cause of death or a significant condition contributing to their death on their death certificate. This definition is in alignment with the California Department of Public Health and the national Council of State and Territorial Epidemiologists. Death certificates are maintained by the California Department of Public Health. Data on the population characteristics of COVID-19 deaths are from: Case reports Medical records Electronic lab reports Death certificates Data are continually updated to maximize completeness of information and reporting on San Francisco COVID-19 deaths. To protect resident privacy, we summarize COVID-19 data by only one population characteristic at a time. Data are not shown until cumulative citywide deaths reach five or more. Data notes on select population characteristic types are listed below. Race/ethnicity * We include all race/ethnicity categories that are collected for COVID-19 cases. Gender * The City collects information on gender identity using these guidelines. C. UPDATE PROCESS Updates automatically at 06:30 and 07:30 AM Pacific Time on Wednesday each week. Dataset will not update on the business day following any federal holiday. D. HOW TO USE THIS DATASET Population estimates are only available for age groups and race/ethnicity categories. San Francisco population estimates for race/ethnicity and age groups can be found in a dataset based on the San Francisco Population and Demographic Census dataset.These population estimates are from the 2018-2022 5-year American Community Survey (ACS). This dataset includes several characteristic types. Filter the “Characteristic Type” column to explore a topic area. Then, the “Characteristic Group” column shows each group or category within that topic area and the number of cumulative deaths. Cumulative deaths are the running total of all San Francisco COVID-19 deaths in that characteristic group up to the date listed. To explore data on the total number of deaths, use the COVID-19 Deaths Over Time dataset. E. CHANGE LOG

A. SUMMARY Geographic zones of the priority areas in the Tenderloin neighborhood used in the COVID-19 assessment and Tenderloin Neighborhood Plan. See more details on the plan here: https://sf.gov/news/san-francisco-releases-tenderloin-neighborhood-safety-assessment-and-plan-covid-19 B. HOW THE DATASET IS CREATED A team of representative City departments from the Healthy Streets Operation Center (Department of Emergency Management, Department of Public Health, Department of Homelessness and Supportive Housing, Human Rights Commission, San Francisco Police Department, San Francisco Fire Department, and Department of Public Works), SF Homeless Outreach Team, Felton Institute, and community groups and stakeholders was assembled to design and implement a robust Tenderloin Neighborhood Needs Assessment. This assessment was conducted on the morning of April 28, 2020 and consisted of multi-disciplinary teams walking each block of an area of the Tenderloin broken into six geographic zones. These zone locations are shown in the plan, and are mapped in this dataset. C. UPDATE PROCESS This is a reference map that will not be updated. D. HOW TO USE THIS DATASET These zones can be used with other datasets to track trends by zone. Note that these zones are the priority zones for the Tenderloin Plan and do not represent the entire Tenderloin Neighborhood boundary. For a boundary of the entire Tenderloin, use the analysis neighborhood boundary: https://data.sfgov.org/Geographic-Locations-and-Boundaries/Analysis-Neighborhoods/p5b7-5n3h

This cross sectional study examined factors influencing access to dental care in the San Francisco Bay Area, using data from 2022 RAPID SF Survey. It assessed prevalence of dental visits in relation to race, household language, insurance type, education level, and income status.

Note: As of July 21, 2021, this dataset no longer updates. A. SUMMARY Data on daily hospital bed use and available capacity at San Francisco acute care hospitals from April 2020 onward. Long Term Care facilities (like Laguna Honda and Kentfield) are not included in this data as acute care patients cannot be admitted to these facilities. B. HOW THE DATASET IS CREATED This hospital capacity information is based on data that all SF acute care hospitals report to the San Francisco Department of Public Health. C. UPDATE PROCESS Updates automatically at 05:00 Pacific Time each day. Redundant runs are scheduled at 07:00 and 09:00 in case of pipeline failure. This data is on a 4-day lag to account for the time needed to complete and validate data from all SF acute care hospitals. D. HOW TO USE THIS DATASET This data provides visibility into current occupancy levels and use of San Francisco acute care hospitals and potential ability to accommodate anticipated surges of COVID patients. Data includes current census of COVID-19 patients (including both confirmed cases and suspected COVID patients) and other patients in acute care hospitals, shown in the “Status” column. The “Status” column also includes all available beds. This daily census information is stratified by type of bed (acute care, intensive care, and surge) in the “Bed Type” column. Acute care beds treat patients with illnesses and injuries including recovery from surgeries. Intensive care (ICU) beds are for sicker patients in need of critical and life support services that can include the use of a ventilator. Surge beds are the additional beds that can be made available to handle an influx of COVID-19 patients; surge beds are differentiated between acute care surge beds and ICU surge beds. Note: The current census of COVID patients shown here may not always match the hospitalizations data (https://data.sfgov.org/COVID-19/COVID-19-Hospitalizations/nxjg-bhem), as that data includes all hospitals and long term care facilities. As described above, those long term care facilities are not included here as they don’t have the capacity to take in additional acute care patients and therefore aren’t included in capacity measures.

A. SUMMARY This dataset represents San Francisco COVID-19 related deaths by day. This data may not be immediately available for recently reported deaths. Data updates as more information becomes available. Because of this, death totals for previous days may increase or decrease. More recent data is less reliable.

B. HOW THE DATASET IS CREATED As of January 1, 2023, COVID-19 deaths are defined as persons who had COVID-19 listed as a cause of death or a significant condition contributing to their death on their death certificate. This definition is in alignment with the California Department of Public Health and the national https://preparedness.cste.org/wp-content/uploads/2022/12/CSTE-Revised-Classification-of-COVID-19-associated-Deaths.Final_.11.22.22.pdf">Council of State and Territorial Epidemiologists. Death data is provided by the California Department of Public Health.

It takes time to process this data. Because of this, death totals may increase or decrease over time.

Data are continually updated to maximize completeness of information and reporting on San Francisco COVID-19 deaths.

C. UPDATE PROCESS Updates automatically at 06:30 and 07:30 AM Pacific Time on Wednesday each week.

Dataset will not update on the business day following any federal holiday.

D. HOW TO USE THIS DATASET This dataset shows new deaths and cumulative deaths by date of death. New deaths are the count of deaths on that specific date. Cumulative deaths are the running total of all San Francisco COVID-19 deaths up to the date listed.

Use the Deaths by Population Characteristics Over Time dataset to see deaths by different subgroups including race/ethnicity, age, and gender.

E. CHANGE LOG

• 9/11/2023 – on this date, we began using an updated definition of a COVID-19 death to align with the California Department of Public Health. This change was applied to COVID-19 deaths retrospectively beginning on 1/1/2023. More information about the recommendation by the Council of State and Territorial Epidemiologists that motivated this change can be found https://preparedness.cste.org/wp-content/uploads/2022/12/CSTE-Revised-Classification-of-COVID-19-associated-Deaths.Final_.11.22.22.pdf">here.
• 4/6/2023 - the State implemented system updates to improve the integrity of historical data.
• 1/22/2022 - system updates to improve timeliness and accuracy of cases and deaths data were implemented.

On 7/18/2025, we will be pausing COVID-19 hospitalization admission data to assess data quality and completeness. A. SUMMARY This dataset includes information on COVID+ hospital admissions for San Francisco residents into San Francisco hospitals. Specifically, the dataset includes the count and rate of COVID+ hospital admissions per 100,000. The data are reported by week. B. HOW THE DATASET IS CREATED Hospital admission data is reported to the San Francisco Department of Public Health (SFDPH) via the COVID Hospital Data Repository (CHDR), a system created via health officer order C19-16. The data includes all San Francisco hospitals except for the San Francisco VA Medical Center. San Francisco population estimates are pulled from a view based on the San Francisco Population and Demographic Census dataset. These population estimates are from the 2018-2022 5-year American Community Survey (ACS). C. UPDATE PROCESS Data updates weekly on Wednesday with data for the past Wednesday-Tuesday (one week lag). Data may change as more current information becomes available. D. HOW TO USE THIS DATASET New admissions are the count of COVID+ hospital admissions among San Francisco residents to San Francisco hospitals by week. The admission rate per 100,000 is calculated by multiplying the count of admissions each week by 100,000 and dividing by the population estimate. E. CHANGE LOG 7/18/2025 - Dataset update is paused to assess data quality and completeness. 9/12/2024 - We updated the data source for our COVID-19 hospitalization data to a San Francisco specific dataset. These new data differ slightly from previous hospitalization data sources but the overall patterns and trends in hospitalizations remain consistent. You can access the previous data here.

A. SUMMARY This dataset represents all San Francisco (SF) residents who have received a vaccine for certain respiratory viruses that circulate more heavily in the fall and winter months. All vaccines given to SF residents are included, even if they received their vaccination elsewhere in California. The data are broken down by demographic and geographical stratifications.

COVID-19: This dataset represents all SF residents who are considered up to date on their COVID-19 vaccine. A person is up to date if they have received at least one dose of the 2025–2026 COVID-19 vaccine. The specific up-to-date criteria can be found on the California Department of Public Health (CDPH) website.

(Note: As of November 2024, this dataset only contains data regarding COVID-19 vaccinations. This documentation will be updated as other seasonal vaccination data is added).

B. HOW THE DATASET IS CREATED Information on doses administered to those who live in SF is from the California Immunization Registry (CAIR2), run by CDPH. The information on individuals’ city of residence, age, race, and ethnicity are also recorded in CAIR and are self-reported at the time of vaccine administration.

In order to estimate the percent of San Franciscans vaccinated, we provide the 2018-2022 American Community Survey (ACS) population estimates for each demographic group and analysis neighborhood.

C. UPDATE PROCESS Updated daily via automated process.

D. HOW TO USE THIS DATASET SF population estimates for race/ethnicity and age groups can be found in a https://data.sfgov.org/Economy-and-Community/SF-COVID-19-reporting-demographics-population-esti/cedd-86uf">view based on the San Francisco Population and Demographic Census dataset. SF population estimates for analysis neighborhoods can be found in a view based on the San Francisco Population and Geography Census dataset. Both of these views use population estimates from the 2018-2022 5-year ACS.

Before analysis, you must filter the dataset to the desired stratification of data using the “vaccine_type” and "demographic_group" columns. For example, filtering “vaccine_type” to “COVID-19” will allow you to only look at rows corresponding to COVID-19 vaccinations. Filtering “demographic_subgroup” to “Analysis Neighborhood” will allow you to only look at rows corresponding to SF neighborhoods. You can then calculate the percentages of those up to date with their COVID-19 vaccinations by neighborhood. The “vaccine_subtype” field provides information about the current vaccine product being tracked in this dataset.

E. CHANGE LOG