This dataset has been deprecated. Please use our 2017 Countywide Contours instead.These data comprise of one foot contours showing the elevation of Lake County, IL corresponding to the orthometric heights of the bare surface of the county (no buildings or vegetation cover). These data were developed from LIDAR data obtained between April 16, 2007 and May 07, 2007, and further supplemented by break lines collected from aerial photography taken at the same time. The contours and the aerial photography meet National Map Accuracy Standards for a 1 inch = 100 foot product. The contours have been created to be cartographically pleasing, as such some generalization has been introduced as expected. The contours have been tested against the original LIDAR points and conforms to the American Society for Photogrammetry and Remote Sensing (ASPRS) Specifications and Standards Committee, 1990, ASPRS Accuracy Standards for Large-Scale Maps, CLASS 1 map accuracy. The vertical datum is the North American Vertical Datum of 1988. The U.S. Army Corps of Engineers Engineering and Design Manual for Photogrammetric Production recommends that data intended for this usage scale be used for any of the following purposes: route location, preliminary alignment and design, preliminary project planning, hydraulic sections, rough earthwork estimates, or high-gradient terrain / low unit cost earthwork excavation estimates. The manual does not recommend that these data be used for final design, excavation and grading plans, earthwork computations for bid estimates or contract measurement and payment. Contour data is used by county agencies to study drainage issues such as flooding and erosion. Customers interested in the actual LiDAR data may download it at no cost from the USGS Center for LiDAR Information Coordination and Knowledge. These files are tiled by PLSS section and grouped by township and format for easier download. Please note that this dataset is available in for GIS in Esri shapefile format as well as for CAD in AutoCAD DWG and MicroStation DGN. We are unable to provide any support for CAD users beyond providing the data.

The seamless, county-wide parcel layer was digitized from official Assessor Parcel (AP) Maps which were originally maintained on mylar sheets and/or maintained as individual Computer Aided Design (CAD) drawing files (e.g., DWG). The CRA office continues to maintain the official AP Maps in CAD drawings and Information Systems Department/Geographic Information Systems (ISD/GIS) staff apply updates from these maps to the seamless parcel base in the County’s Enterprise GIS. This layer is a partial view of the Information Sales System (ISS) extract, a report of property characteristics taken from the County’s Megabyte Property Tax System (MPTS). This layer may be missing some attributes (e.g., Owner Name) which may not be published to the Internet due to privacy conditions under the California Public Records Act (CPRA). Please contact the Clerk-Recorder-Assessor (CRA) office at (707) 565-1888 for information on availability, associated fees, and access to other versions of Sonoma County parcels containing additional property characteristics.The seamless parcel layer is updated and published to the Internet on a monthly basis.The seamless parcel layer was developed from the source data using the general methodology outlined below. The mylar sheets were scanned and saved to standard image file format (e.g., TIFF). The individual scanned maps or CAD drawing files were imported into GIS software and geo-referenced to their corresponding real-world locations using high resolution orthophotography as control. The standard approach was to rescale and rotate the scanned drawing (or CAD file) to match the general location on the orthophotograph. Then, appropriate control points were selected to register and rectify features on the scanned map (or CAD drawing file) to the orthophotography. In the process, features in the scanned map (or CAD drawing file) were transformed to real-world coordinates, and line features were created using “heads-up digitizing” and stored in new GIS feature classes. Recommended industry best practices were followed to minimize root mean square (RMS) error in the transformation of the data, and to ensure the integrity of the overall pattern of each AP map relative to neighboring pages. Where available Coordinate Geometry (COGO) & survey data, tied to global positioning systems (GPS) coordinates, were also referenced and input to improve the fit and absolute location of each page. The vector lines were then assembled into a polygon features, with each polygon being assigned a unique identifier, the Assessor Parcel Number (APN). The APN field in the parcel table was joined to the corresponding APN field in the assessor property characteristics table extracted from the MPTS database to create the final parcel layer. The result is a seamless parcel land base, each parcel polygon coded with a unique APN, assembled from approximately 6,000 individual map page of varying scale and accuracy, but ensuring the correct topology of each feature within the whole (i.e., no gaps or overlaps). The accuracy and quality of the parcels varies depending on the source. See the fields RANK and DESCRIPTION fields below for information on the fit assessment for each source page. These data should be used only for general reference and planning purposes. It is important to note that while these data were generated from authoritative public records, and checked for quality assurance, they do not provide survey-quality spatial accuracy and should NOT be used to interpret the true location of individual property boundary lines. Please contact the Sonoma County CRA and/or a licensed land surveyor before making a business decision that involves official boundary descriptions.

Hydrography dataset current as of 1996. Polk County was flown in May 1996. Ayres Associates, Madison, digitized all hydrography features and provided this data as a two-dimensional AutoCAD drawing file. In 2006 Polk County converted the AutoCAD hydrography file into and shapefile creating the h.

This layer identifies the Commercial Core Area. This area has specific development restrictions that differ from other portions of the City. Layer is available for download as a shapefile, GDB or CAD drawing via the City of Aspen Open Data Site.

This dataset has been deprecated. Please use our 2017 Countywide Contours instead.These data comprise of one foot contours showing the elevation of Lake County, IL corresponding to the orthometric heights of the bare surface of the county (no buildings or vegetation cover). These data were developed from LIDAR data obtained between April 16, 2007 and May 07, 2007, and further supplemented by break lines collected from aerial photography taken at the same time. The contours and the aerial photography meet National Map Accuracy Standards for a 1 inch = 100 foot product. The contours have been created to be cartographically pleasing, as such some generalization has been introduced as expected. The contours have been tested against the original LIDAR points and conforms to the American Society for Photogrammetry and Remote Sensing (ASPRS) Specifications and Standards Committee, 1990, ASPRS Accuracy Standards for Large-Scale Maps, CLASS 1 map accuracy. The vertical datum is the North American Vertical Datum of 1988. The U.S. Army Corps of Engineers Engineering and Design Manual for Photogrammetric Production recommends that data intended for this usage scale be used for any of the following purposes: route location, preliminary alignment and design, preliminary project planning, hydraulic sections, rough earthwork estimates, or high-gradient terrain / low unit cost earthwork excavation estimates. The manual does not recommend that these data be used for final design, excavation and grading plans, earthwork computations for bid estimates or contract measurement and payment. Contour data is used by county agencies to study drainage issues such as flooding and erosion. Customers interested in the actual LiDAR data may download it at no cost from the USGS Center for LiDAR Information Coordination and Knowledge. These files are tiled by PLSS section and grouped by township and format for easier download. Please note that this dataset is available in for GIS in Esri shapefile format as well as for CAD in AutoCAD DWG and MicroStation DGN. We are unable to provide any support for CAD users beyond providing the data.

This dataset is very large and detailed. As a result, there is no option to download a single dataset of the entire City as a shapefile (.shp) since it would exceed the 2 GB file size limit. If you intend to use this data in a CAD program, you should download the zone(s) in shapefile format and attach the data to your project.

 Download Shapefile by Zone(click on a zone to start the download)



  Zone A





  Zone C


  Zone B





  Zone D

This layer shows the townsite block information for the City of Aspen. It is available for download as a shapefile, GDB or CAD drawing via the City of Aspen Open Data Site

These data comprise of one foot contours showing the elevation of Lake County, IL corresponding to the orthometric heights of the bare surface of the county (no buildings or vegetation cover). These data were developed from LIDAR data obtained between April 16, 2007 and May 07, 2007, and further supplemented by break lines collected from aerial photography taken at the same time. The contours and the aerial photography meet National Map Accuracy Standards for a 1 inch = 100 foot product. The contours have been created to be cartographically pleasing, as such some generalization has been introduced as expected. The contours have been tested against the original LIDAR points and conforms to the American Society for Photogrammetry and Remote Sensing (ASPRS) Specifications and Standards Committee, 1990, ASPRS Accuracy Standards for Large-Scale Maps, CLASS 1 map accuracy. The vertical datum is the North American Vertical Datum of 1988.

The U.S. Army Corps of Engineers Engineering and Design Manual for Photogrammetric Production recommends that data intended for this usage scale be used for any of the following purposes: route location, preliminary alignment and design, preliminary project planning, hydraulic sections, rough earthwork estimates, or high-gradient terrain / low unit cost earthwork excavation estimates. The manual does not recommend that these data be used for final design, excavation and grading plans, earthwork computations for bid estimates or contract measurement and payment.

Contour data is used by county agencies to study drainage issues such as flooding and erosion. Customers interested in the actual LiDAR data may download it at no cost from the USGS Center for LiDAR Information Coordination and Knowledge.

These files are tiled by PLSS section and grouped by township and format for easier download. Please note that this dataset is available in for GIS in Esri shapefile format as well as for CAD in AutoCAD DWG and MicroStation DGN. We are unable to provide any support for CAD users beyond providing the data.

These data comprise of one foot contours showing the elevation of Lake County, IL corresponding to the orthometric heights of the bare surface of the county (no buildings or vegetation cover). These data were developed from LIDAR data obtained between April 16, 2007 and May 07, 2007, and further supplemented by break lines collected from aerial photography taken at the same time. The contours and the aerial photography meet National Map Accuracy Standards for a 1 inch = 100 foot product. The contours have been created to be cartographically pleasing, as such some generalization has been introduced as expected. The contours have been tested against the original LIDAR points and conforms to the American Society for Photogrammetry and Remote Sensing (ASPRS) Specifications and Standards Committee, 1990, ASPRS Accuracy Standards for Large-Scale Maps, CLASS 1 map accuracy. The vertical datum is the North American Vertical Datum of 1988.

The U.S. Army Corps of Engineers Engineering and Design Manual for Photogrammetric Production recommends that data intended for this usage scale be used for any of the following purposes: route location, preliminary alignment and design, preliminary project planning, hydraulic sections, rough earthwork estimates, or high-gradient terrain / low unit cost earthwork excavation estimates. The manual does not recommend that these data be used for final design, excavation and grading plans, earthwork computations for bid estimates or contract measurement and payment.

Contour data is used by county agencies to study drainage issues such as flooding and erosion. Customers interested in the actual LiDAR data may download it at no cost from the USGS Center for LiDAR Information Coordination and Knowledge.

These files are tiled by PLSS section and grouped by township and format for easier download. Please note that this dataset is available in for GIS in Esri shapefile format as well as for CAD in AutoCAD DWG and MicroStation DGN. We are unable to provide any support for CAD users beyond providing the data.

Dataset contains contours at 10-foot intervals of the San Antonio Reservoir, California, based on the bathymetric survey conducted in April of 2018. Files are provided as geospatial shapefiles and CAD (.dwg file extension) files.

Geospatial data about grid.shp.xml. Export to CAD, GIS, PDF, CSV and access via API.

Vector polygon map data of property parcels from Sarasota County, Florida containing 285,291 features.

Property parcel GIS map data consists of detailed information about individual land parcels, including their boundaries, ownership details, and geographic coordinates.

Property parcel data can be used to analyze and visualize land-related information for purposes such as real estate assessment, urban planning, or environmental management.

Available for viewing and sharing as a map in a Koordinates map viewer. This data is also available for export to DWG for CAD, PDF, KML, CSV, and GIS data formats, including Shapefile, MapInfo, and Geodatabase.

This layer shows the townsite lot information for the City of Aspen. It is available for download as a shapefile, GDB or CAD drawing via the City of Aspen Open Data Sited

Utilities data were supplied to Geoscience Australia by Gutteridge Haskins & Davey Pty Ltd (GHD) on 25th May 2001. Utilities data supplied included fuel related infrastructure. GHD compiled the utilities data from original CAD drawings collected over many years through management of island infrastructure by the Commonwealth Department of Administrative Services. The CAD drawings were converted into ESRI shapefiles by GHD. In 2006 GHD updated several of the 2001 utilities shapefiles. The fuel points shapefile (fuel_points.shp) shows isolation valves and ‘caution pipeline below’ signposts. Data indicative only and not to be relied on. Data may not include most recent changes. Disclaimer

Geospatial data about key_species.shp.xml. Export to CAD, GIS, PDF, CSV and access via API.

Vector polygon map data of city limits from Houston, Texas containing 731 features.

City limits GIS (Geographic Information System) data provides valuable information about the boundaries of a city, which is crucial for various planning and decision-making processes. Urban planners and government officials use this data to understand the extent of their jurisdiction and to make informed decisions regarding zoning, land use, and infrastructure development within the city limits.

By overlaying city limits GIS data with other layers such as population density, land parcels, and environmental features, planners can analyze spatial patterns and identify areas for growth, conservation, or redevelopment. This data also aids in emergency management by defining the areas of responsibility for different emergency services, helping to streamline response efforts during crises..

This city limits data is available for viewing and sharing as a map in a Koordinates map viewer. This data is also available for export to DWG for CAD, PDF, KML, CSV, and GIS data formats, including Shapefile, MapInfo, and Geodatabase.

Vector polygon map data of property parcels from Memphis, Tennessee containing 349,370 features.

Property parcel GIS map data consists of detailed information about individual land parcels, including their boundaries, ownership details, and geographic coordinates.

Property parcel data can be used to analyze and visualize land-related information for purposes such as real estate assessment, urban planning, or environmental management.

Available for viewing and sharing as a map in a Koordinates map viewer. This data is also available for export to DWG for CAD, PDF, KML, CSV, and GIS data formats, including Shapefile, MapInfo, and Geodatabase.

These data comprise of one foot contours showing the elevation of Lake County, IL corresponding to the orthometric heights of the bare surface of the county (no buildings or vegetation cover). These data were developed from LIDAR data obtained between April 16, 2007 and May 07, 2007, and further supplemented by break lines collected from aerial photography taken at the same time. The contours and the aerial photography meet National Map Accuracy Standards for a 1 inch = 100 foot product. The contours have been created to be cartographically pleasing, as such some generalization has been introduced as expected. The contours have been tested against the original LIDAR points and conforms to the American Society for Photogrammetry and Remote Sensing (ASPRS) Specifications and Standards Committee, 1990, ASPRS Accuracy Standards for Large-Scale Maps, CLASS 1 map accuracy. The vertical datum is the North American Vertical Datum of 1988.

The U.S. Army Corps of Engineers Engineering and Design Manual for Photogrammetric Production recommends that data intended for this usage scale be used for any of the following purposes: route location, preliminary alignment and design, preliminary project planning, hydraulic sections, rough earthwork estimates, or high-gradient terrain / low unit cost earthwork excavation estimates. The manual does not recommend that these data be used for final design, excavation and grading plans, earthwork computations for bid estimates or contract measurement and payment.

Contour data is used by county agencies to study drainage issues such as flooding and erosion. Customers interested in the actual LiDAR data may download it at no cost from the USGS Center for LiDAR Information Coordination and Knowledge.

These files are tiled by PLSS section and grouped by township and format for easier download. Please note that this dataset is available in for GIS in Esri shapefile format as well as for CAD in AutoCAD DWG and MicroStation DGN. We are unable to provide any support for CAD users beyond providing the data.

Geospatial data about droughttrends_XYTabl_Project.shp.xml. Export to CAD, GIS, PDF, CSV and access via API.

The TIGER/Line shapefiles and related database files (.dbf) are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). The MTDB represents a seamless national file with no overlaps or gaps between parts, however, each TIGER/Line shapefile is designed to stand alone as an independent data set, or they can be combined to cover the entire nation. Face refers to the areal (polygon) topological primitives that make up MTDB. A face is bounded by one or more edges; its boundary includes only the edges that separate it from other faces, not any interior edges contained within the area of the face. The Topological Faces Shapefile contains the attributes of each topological primitive face. Each face has a unique topological face identifier (TFID) value. Each face in the shapefile includes the key geographic area codes for all geographic areas for which the Census Bureau tabulates data for both the 2020 Census and the annual estimates and surveys. The geometries of each of these geographic areas can then be built by dissolving the face geometries on the appropriate key geographic area codes in the Topological Faces Shapefile.