This statistic shows the 25 largest counties in the United States in 2022, by population. In 2022, about 9.72 million people were estimated to be living in Los Angeles County, California.

Additional information on urbanization in the United States

Urbanization is defined as the process by which cities grow or by which societies become more urban. Rural to urban migration in the United States, and around the world, is often undertaken in the search for employment or to enjoy greater access to services such as healthcare. The largest cities in the United States are steadily growing. Given their size, incremental increases yield considerable numerical gains as seen by New York increasing by 69,777 people in 2011, the most of any city. However in terms of percentage growth, smaller cities outside the main centers are growing the fastest, such as Georgetown city and Leander city in Texas.

Urbanization has increased slowly in the United States, rising from 80.77 percent of the population living in urban areas in 2010 to 82.66 percent in 2020. In 2018, the United States ranked 14th in a ranking of countries based on their degree of urbanization. Unlike fully urbanized countries such as Singapore and Hong Kong, the United States maintains a sizeable agricultural industry. Although technological developments have reduced demands for rural labor, labor in the industry and supporting services are still required.

This map shows population density of the United States. Areas in darker magenta have much higher population per square mile than areas in orange or yellow. Data is from the U.S. Census Bureau’s 2020 Census Demographic and Housing Characteristics. The map's layers contain total population counts by sex, age, and race groups for Nation, State, County, Census Tract, and Block Group in the United States and Puerto Rico. From the Census:"Population density allows for broad comparison of settlement intensity across geographic areas. In the U.S., population density is typically expressed as the number of people per square mile of land area. The U.S. value is calculated by dividing the total U.S. population (316 million in 2013) by the total U.S. land area (3.5 million square miles).When comparing population density values for different geographic areas, then, it is helpful to keep in mind that the values are most useful for small areas, such as neighborhoods. For larger areas (especially at the state or country scale), overall population density values are less likely to provide a meaningful measure of the density levels at which people actually live, but can be useful for comparing settlement intensity across geographies of similar scale." SourceAbout the dataYou can use this map as is and you can also modify it to use other attributes included in its layers. This map's layers contain total population counts by sex, age, and race groups data from the 2020 Census Demographic and Housing Characteristics. This is shown by Nation, State, County, Census Tract, Block Group boundaries. Each geography layer contains a common set of Census counts based on available attributes from the U.S. Census Bureau. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.Vintage of boundaries and attributes: 2020 Demographic and Housing Characteristics Table(s): P1, H1, H3, P2, P3, P5, P12, P13, P17, PCT12 (Not all lines of these DHC tables are available in this feature layer.)Data downloaded from: U.S. Census Bureau’s data.census.gov siteDate the Data was Downloaded: May 25, 2023Geography Levels included: Nation, State, County, Census Tract, Block GroupNational Figures: included in Nation layer The United States Census Bureau Demographic and Housing Characteristics: 2020 Census Results 2020 Census Data Quality Geography & 2020 Census Technical Documentation Data Table Guide: includes the final list of tables, lowest level of geography by table and table shells for the Demographic Profile and Demographic and Housing Characteristics.News & Updates This map is ready to be used in ArcGIS Pro, ArcGIS Online and its configurable apps, Story Maps, dashboards, Notebooks, Python, custom apps, and mobile apps. Data can also be exported for offline workflows. Please cite the U.S. Census Bureau when using this data. Data Processing Notes: These 2020 Census boundaries come from the US Census TIGER geodatabases. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For Census tracts and block groups, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract and block group boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2020 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are unchanged and available as attributes within the data table (units are square meters).  The layer contains all US states, Washington D.C., and Puerto Rico. Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Block groups that fall within the same criteria (Block Group denoted as 0 with no area land) have also been removed.Percentages and derived counts, are calculated values (that can be identified by the "_calc_" stub in the field name). Field alias names were created based on the Table Shells file available from the Data Table Guide for the Demographic Profile and Demographic and Housing Characteristics. Not all lines of all tables listed above are included in this layer. Duplicative counts were dropped. For example, P0030001 was dropped, as it is duplicative of P0010001.To protect the privacy and confidentiality of respondents, their data has been protected using differential privacy techniques by the U.S. Census Bureau.

This dataset contains poverty estimates at county level based on US Census Bureau program, Small Area Income and Poverty Estimates (SAIPE). The estimates are for counties and states in the United States, for the entire population and for three age groups of population.

How many incorporated places are registered in the U.S.?

There were 19,502 incorporated places registered in the United States as of July 31, 2019. 16,410 had a population under 10,000 while, in contrast, only 10 cities had a population of one million or more.

Small-town America

Suffice it to say, almost nothing is more idealized in the American imagination than small-town America. When asked where they would prefer to live, 30 percent of Americans reported that they would prefer to live in a small town. Americans tend to prefer small-town living due to a perceived slower pace of life, close-knit communities, and a more affordable cost of living when compared to large cities.

An increasing population

Despite a preference for small-town life, metropolitan areas in the U.S. still see high population figures, with the New York, Los Angeles, and Chicago metro areas being the most populous in the country. Metro and state populations are projected to increase by 2040, so while some may move to small towns to escape city living, those small towns may become more crowded in the upcoming decades.

A dataset listing North Carolina counties by population for 2024.

Only counties in nonmetropolitan areas may be eligible for HUBZone designated status. In order for a nonmetropolitan county to qualify: the median household income in the county must be less than 80% of the nonmetropolitan state median household income, or the unemployment rate in the county must be at least 140% of either the national or state unemployment rate, or the county is classified as a Difficult Development Area, as designated by HUD within Alaska, Hawaii, or any territory or possession of the United States, outside of the 48 contiguous states.

The Census data utilized for developing the Community Layer used 2010 TIGER/Line shapefile datasets (TIGER = Topologically Integrated Geographic Encoding and Referencing). TIGER/Line shapefiles are available for free download from the US Census Bureau and include various legal and statistical geographic areas for which the Census tabulates data. The shapefiles are designed to be used in a GIS environment, with the ability to directly link the geographic areas to Census data via a unique GEOID number.The following TIGER/Line datasets should be used: - Counties and Equivalent Entities –primary legal divisions within each state (counties, parishes, etc)- County Subdivisions –includes both legal areas (Minor Civil Divisions or MCDs) and various statistical areas- Places –includes both legal areas (Incorporated Places) and statistical areas (Census Designated Places or CDPs)- Blocks –the smallest geographical area for which Census population counts are recorded; blocks never cross boundaries of any entity for which the Census Bureau tabulates data, including counties, county subdivisions, places, and American Indian, Alaska Native, and Native Hawaiian (AIANNH) areas- American Indian, Alaska Native, and Native Hawaiian (AIANNH) AreasExtracting and Formatting CIS DataA key component of the community layer is the ability to link CIS information spatially. Data from CIS cannot directly be joined with Census data. The two datasets have community name discrepancies which impede an exact match. Therefore, CIS data needs to be formatted to match Census community names. A custom report can be obtained from CIS to include a CID number, Community Name, County, State, Community Status, and Tribal status for all CIS records. Make sure all CID numbers are six digits and you follow the CIS community naming convention outlined in Table 4.2.1.1 in the Community Layer Update Technical Guide 20131206. Converting the CIS name“ADDISON, VILLAGE OF” to “ADDISON TOWN”involves removing unneeded spaces, comma, and preposition to make the join successful to the Census data. Using a comprehensive report at a national level gains efficiencies as bulk edits can be made. Data for each state should be extracted as needed by separating the CIS data into each type of community corresponding to the Census geography layers used, and a new JoinID column (e.g. ADDISON TOWN) can be created for each dataset allowing the CIS data to be joined to the Census data.

This map layer includes Global Map data showing the counties and equivalent entities of the United States, Puerto Rico, and the U.S. Virgin Islands. States and the national extent may be derived from the information included in the map layer. The data are a modified version of the National Atlas of the United States 1:1,000,000-Scale County Boundaries of the United States; that data set was created by extracting county polygon features from the CENSUS 2006 TIGER/Line files produced by the U.S. Census Bureau.

Graph and download economic data for Poverty Universe, Age 0-17 for Petersburg Census Area, AK (PUA0T17AK02195A647NCEN) from 2009 to 2023 about Petersburg Census Area, AK; AK; child; poverty; and USA.

Graph and download economic data for Estimate of Median Household Income for Sierra County, CA (MHICA06091A052NCEN) from 1989 to 2023 about Sierra County, CA; CA; households; median; income; and USA.

A dataset listing Alabama counties by population for 2024.

U.S. Census Bureau QuickFacts statistics for Essex County, Massachusetts. QuickFacts data are derived from: Population Estimates, American Community Survey, Census of Population and Housing, Current Population Survey, Small Area Health Insurance Estimates, Small Area Income and Poverty Estimates, State and County Housing Unit Estimates, County Business Patterns, Nonemployer Statistics, Economic Census, Survey of Business Owners, Building Permits.

About this dataset

Context

The dataset presents median household incomes for various household sizes in County Line, AL, as reported by the U.S. Census Bureau. The dataset highlights the variation in median household income with the size of the family unit, offering valuable insights into economic trends and disparities within different household sizes, aiding in data analysis and decision-making.

Key observations

• Of the 7 household sizes (1 person to 7-or-more person households) reported by the census bureau, only 2, and 3-person households were found in County Line. Across the different household sizes in County Line the mean income is $94,220, and the standard deviation is $9,045. The coefficient of variation (CV) is 9.60%. This high CV indicates high relative variability, suggesting that the incomes vary significantly across different sizes of households.
• In the most recent year, 2021, The smallest household size for which the bureau reported a median household income was 2-person households, with an income of $100,615. It then further decreased to 87,824 for 3-person households, the largest household size for which the bureau reported a median household income.

https://i.neilsberg.com/ch/county-line-al-median-household-income-by-household-size.jpeg" alt="County Line, AL median household income, by household size (in 2022 inflation-adjusted dollars)">

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2017-2021 5-Year Estimates.

Household Sizes:

• 1-person households
• 2-person households
• 3-person households
• 4-person households
• 5-person households
• 6-person households
• 7-or-more-person households

Variables / Data Columns

• Household Size: This column showcases 7 household sizes ranging from 1-person households to 7-or-more-person households (As mentioned above).
• Median Household Income: Median household income, in 2022 inflation-adjusted dollars for the specific household size.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for County Line median household income. You can refer the same here

About this dataset

Context

The dataset presents median household incomes for various household sizes in Laclede County, MO, as reported by the U.S. Census Bureau. The dataset highlights the variation in median household income with the size of the family unit, offering valuable insights into economic trends and disparities within different household sizes, aiding in data analysis and decision-making.

Key observations

• Of the 7 household sizes (1 person to 7-or-more person households) reported by the census bureau, all of the household sizes were found in Laclede County. Across the different household sizes in Laclede County the mean income is $69,729, and the standard deviation is $23,756. The coefficient of variation (CV) is 34.07%. This high CV indicates high relative variability, suggesting that the incomes vary significantly across different sizes of households.
• In the most recent year, 2023, The smallest household size for which the bureau reported a median household income was 1-person households, with an income of $25,703. It then further increased to $90,032 for 7-person households, the largest household size for which the bureau reported a median household income.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates.

Household Sizes:

• 1-person households
• 2-person households
• 3-person households
• 4-person households
• 5-person households
• 6-person households
• 7-or-more-person households

Variables / Data Columns

• Household Size: This column showcases 7 household sizes ranging from 1-person households to 7-or-more-person households (As mentioned above).
• Median Household Income: Median household income, in 2023 inflation-adjusted dollars for the specific household size.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Laclede County median household income. You can refer the same here

U.S. Census Bureau QuickFacts statistics for Groveland town, Essex County, Massachusetts. QuickFacts data are derived from: Population Estimates, American Community Survey, Census of Population and Housing, Current Population Survey, Small Area Health Insurance Estimates, Small Area Income and Poverty Estimates, State and County Housing Unit Estimates, County Business Patterns, Nonemployer Statistics, Economic Census, Survey of Business Owners, Building Permits.

This map's colors indicate which population is larger in each area: urban (green) or rural (yellow). The map's layers contain total population counts by sex, age, and race groups for Nation, State Legislative Districts Upper, State Legislative Districts Lower, Congressional District in the United States and Puerto Rico.The U.S. Census designates each census block as part of an urban area or as rural. Larger geographies in this map such as block group, tract, county and state can therefore have a mix of urban and rural population. This map illustrates the 100% urban areas in dark green, and 100% rural areas in dark yellow. Areas with mixed urban/rural population have softer shades of green or yellow, to give a visual indication of where change may be happening. From the Census:"The Census Bureau’s urban-rural classification is a delineation of geographic areas, identifying both individual urban areas and the rural area of the nation. The Census Bureau’s urban areas represent densely developed territory, and encompass residential, commercial, and other non-residential urban land uses. The Census Bureau delineates urban areas after each decennial census by applying specified criteria to decennial census and other data. Rural encompasses all population, housing, and territory not included within an urban area.For the 2020 Census, an urban area will comprise a densely settled core of census blocks that meet minimum housing unit density and/or population density requirements. This includes adjacent territory containing non-residential urban land uses. To qualify as an urban area, the territory identified according to criteria must encompass at least 2,000 housing units or have a population of at least 5,000." SourceAbout the dataYou can use this map as is and you can also modify it to use other attributes included in its layers. This map's layers contain total population counts by sex, age, and race groups data from the 2020 Census Demographic and Housing Characteristics. This is shown by Nation, State, County, Census Tract, Block Group boundaries. Each geography layer contains a common set of Census counts based on available attributes from the U.S. Census Bureau. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.Vintage of boundaries and attributes: 2020 Demographic and Housing Characteristics Table(s): P1, H1, H3, P2, P3, P5, P12, P13, P17, PCT12 (Not all lines of these DHC tables are available in this feature layer.)Data downloaded from: U.S. Census Bureau’s data.census.gov siteDate the Data was Downloaded: May 25, 2023Geography Levels included: Nation, State, County, Census Tract, Block GroupNational Figures: included in Nation layer The United States Census Bureau Demographic and Housing Characteristics: 2020 Census Results 2020 Census Data Quality Geography & 2020 Census Technical Documentation Data Table Guide: includes the final list of tables, lowest level of geography by table and table shells for the Demographic Profile and Demographic and Housing Characteristics.News & Updates This map is ready to be used in ArcGIS Pro, ArcGIS Online and its configurable apps, Story Maps, dashboards, Notebooks, Python, custom apps, and mobile apps. Data can also be exported for offline workflows. Please cite the U.S. Census Bureau when using this data. Data Processing Notes: These 2020 Census boundaries come from the US Census TIGER geodatabases. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For Census tracts and block groups, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract and block group boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2020 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are unchanged and available as attributes within the data table (units are square meters).  The layer contains all US states, Washington D.C., and Puerto Rico. Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Block groups that fall within the same criteria (Block Group denoted as 0 with no area land) have also been removed.Percentages and derived counts, are calculated values (that can be identified by the "_calc_" stub in the field name). Field alias names were created based on the Table Shells file available from the Data Table Guide for the Demographic Profile and Demographic and Housing Characteristics. Not all lines of all tables listed above are included in this layer. Duplicative counts were dropped. For example, P0030001 was dropped, as it is duplicative of P0010001.To protect the privacy and confidentiality of respondents, their data has been protected using differential privacy techniques by the U.S. Census Bureau.

Graph and download economic data for Poverty Universe, All Ages for Wade Hampton Census Area, AK (DISCONTINUED) (PUAAAK02270A647NCEN) from 1999 to 2014 about kusilvak census area, ak; AK; poverty; and USA.

A dataset listing Colorado counties by population for 2024.

U.S. Census Bureau QuickFacts statistics for Marion town, Plymouth County, Massachusetts. QuickFacts data are derived from: Population Estimates, American Community Survey, Census of Population and Housing, Current Population Survey, Small Area Health Insurance Estimates, Small Area Income and Poverty Estimates, State and County Housing Unit Estimates, County Business Patterns, Nonemployer Statistics, Economic Census, Survey of Business Owners, Building Permits.

U.S. Census Bureau QuickFacts statistics for Medfield town, Norfolk County, Massachusetts. QuickFacts data are derived from: Population Estimates, American Community Survey, Census of Population and Housing, Current Population Survey, Small Area Health Insurance Estimates, Small Area Income and Poverty Estimates, State and County Housing Unit Estimates, County Business Patterns, Nonemployer Statistics, Economic Census, Survey of Business Owners, Building Permits.