This map provides information on speed limits that are posted on state-maintained roadways in Virginia. Cities and towns set their own speed limits and these are not available to show on the map. Zoom in on the map to display the speed limits. Speed limits exist for all roads however; where this information is not available for mapping, they are not displayed. Most roads where speed limits are not shown are either rural, secondary roads (routes numbered 600 or greater) where a statutory 55 mph speed limit typically applies, or subdivision streets where a statutory 25 mph speed limit usually applies. These statutory speed limits are often are not posted on these roads. Click on any roadway to display the speed limit information.
CC0 1.0 Universal Public Domain Dedicationhttps://creativecommons.org/publicdomain/zero/1.0/
License information was derived automatically
The road characteristics database (WKD) for speeds contains speed limits for all roads in the NWB. At the beginning of 2017, WKD was filled for the entire Netherlands with data supplied by municipalities. From that moment on, the new traffic decisions have been used via the Knowledge and Operation Center for Official Government Publications (KOOP) to detect and process changes in speed limits. The NWB changes faster than the speed limits are supplied by the road authorities or placed in COOP. Algorithms are used to supplement the speed where necessary on short intermediate road sections. As a result, the speed limit is unknown for a few percent. Since 2022, the features Trees, Entrances, Bowl Boundaries, Parking Points, Parking Spaces, Traffic Center, Traffic Types, Road Width, Road Categorization and Road Narrowings have been added to the database as a CSV file. NB: In residential areas where a maximum speed of 30 km per hour applies, or in a residential area, this leads to major deviations from reality. The number of rural roads with a 60 km limit has also increased significantly since 2017. The possible speeds that can be entered are 5, 15, 20, 30, 40, 50, 60, 70, 80, 90, 100, 120, 130 km per hour and unknown. The speeds only apply to roads that are open to car traffic. On cycle paths, footpaths and other roads that are not open to car traffic, the speed is entered as unknown. This also applies to the ferry connections. The file provides variable maximum speeds with a start time and an end time. These apply in particular to motorways. Outside this period with the indicated start time and end time, an alternative speed applies. So, for example, between 6:00 AM and 7:00 PM the speed limit is 100 km per hour and outside of that time the maximum speed is 120 km per hour. The road characteristics database for speeds also contains the recommended speed limits that apply to a specific road section or part thereof.
MIT Licensehttps://opensource.org/licenses/MIT
License information was derived automatically
This dynamic map service provodes a a linear representation of speed limit changes based on signs in the field or speed zones established by an Official Order.
Max Speed limit values in miles per hour. This data is an extract from the Geospatial Roadway Inventory Databse (GRID), which is TxDOT's system for managing roadway assets in Texas.Note: Extracts from GRID are made on a regular basis and reflect the state of the data at that moment. Assets on routes that are in the process of being edited may be affected.Update Frequency: 1 MonthsSource: Geospatial Roadway Inventory Database (GRID)Security Level: PublicOwned by TxDOT: TrueRelated LinksData Dictionary PDF [Generated 2025/04/24]
This data set is a linear representation of the extents and attribution associated with speed limit as derived from speed zone records as originally created by the Traffic Engineering Division (TED) of VDOT. This data layer was created for Speed Zone application of Roadway Network System by extracting the zone location information for each feature from the speed zone database and then applying this location description to the linear referencing system built for the Virginia roadway network, and then associating the zone business data to the spatially located feature. Over time new speed zones are created that may overlap - supersede an existing zone. This layer uses business rules to calculate the speed limit. A conventional zone and a variable limit may exist at a single selected location. This data set is maintained by RNS application. There are two types of SPZ records first are for "Statutory" zones where signs are erected to mark roads on which the statutory speed limits apply. The second type of zone is "Resolution" in which the VDOT Commissioner approves changes in speed limits based on recommendations from TED following traffic studies at the proposed location. In these cases the speed limit may be set to any recommended value, in 5 mph increments, and with differing speed limits for trucks versus other vehicles, different speed limits based on time of day, etc.
Geospatial data about North Carolina Interstate Speed Limits. Export to CAD, GIS, PDF, CSV and access via API.
This dataset comprises road centerlines for all roads in San Diego County. Road centerline information is collected from recorded documents (subdivision and parcel maps) and information provided by local jurisidictions (Cities in San Diego County, County of San Diego). Road names and address ranges are as designated by the official address coordinator for each jurisidcition. Jurisdictional information is created from spatial overlays with other data layers (e.g. Jurisdiction, Census Tract).The layer contains both public and private roads. Not all roads are shown on official, recorded documents. Centerlines may be included for dedicated public roads even if they have not been constructed. Public road names are the official names as maintained by the addressing authority for the jurisdiction in which the road is located. Official road names may not match the common or local name used to identify the road (e.g. State Route 94 is the official name of certain road segments commonly referred to as Campo Road).Private roads are either named or unnamed. Named private roads are as shown on official recorded documents or as directed by the addressing authority for the jurisdiction in which the road is located. Unnamed private roads are included where requested by the local jurisidiction or by SanGIS JPA members (primarily emergency response dispatch agencies). Roads are comprised of road segments that are individually identified by a unique, and persistent, ID (ROADSEGID). Roads segments are terminated where they intersect with each other, at jurisdictional boundaries (i.e. city limits), certain census tract and law beat boundaries, at locations where road names change, and at other locations as required by SanGIS JPA members. Each road segment terminates at an intersection point that can be found in the ROADS_INTERSECTION layer.Road centerlines do not necessarily follow the centerline of dedicated rights-of-way (ROW). Centerlines are adjusted as needed to fit the actual, constructed roadway. However, many road centerline segments are created intially based on record documents prior to construction and may not have been updated to meet as-built locations. Please notify SanGIS if the actual location differs from that shown. See the SanGIS website for contact information and reporting problems (http://www.sangis.org/contact/problem.html).Note, the road speeds in this layer are based on road segment class and were published as part of an agreement between San Diego Fire-Rescue, the San Diego County Sheriff's Department, and SanGIS. The average speed is based on heavy fire vehicles and may not represent the posted speed limit.
SpeedMap is a project with the aim of producing a national speed limit database for the UK and Republic of Ireland which can be used with any digital map. Ten years ago we recognised the need for an accurate map to support innovation in road safety – without being tied to a costly proprietary mapping solution. Our data is sourced from a multitude of datasets and boasts 100% coverage of the UK and RoI road network with industry-leading accuracy >99%. Since supplying the first version to a telematics startup in 2012, SpeedMap has become the number one choice for companies who need speed limit data. Our dataset is used by global mapping providers, delivery companies, utility providers, insurance companies, as well as those providing in-vehicle systems. We make our data accessible, reliable and exploitable for your commercial needs, as well as putting the data in the hands of those responsible for making our roads safer.
The North American Roads dataset was compiled on October 27, 2020 from the Bureau of Transportation Statistics (BTS) and is part of the U.S. Department of Transportation (USDOT)/Bureau of Transportation Statistics (BTS) National Transportation Atlas Database (NTAD). This dataset contains geospatial information regarding major roadways in North America. On March 31, 2025, the errant records with a value of 2 in the "NHS" field were corrected to have a value of 7 (Other NHS). The data set covers the 48 contiguous United States plus the District of Columbia, Alaska, Hawaii, Canada and Mexico. The nominal scale of the data set is 1:100,000. The data within the North American Roads layer is a compilation of data from Natural Resources Canada, USDOT’s Federal Highway Administration, and the Mexican Transportation Institute. North American Roads is a digital single-line representation of major roads and highways for Canada, the United States, and Mexico with consistent definitions by road class, jurisdiction, lane counts, speed limits and surface type.
This service provides lines representing posted speed limits along centerlines of North Carolina state-maintained roads. This data comes from traffic ordinances governing speed limit; where there is no ordinance, the speed limit is 35 within municipalities and 55 outside. The N.C. Department of Transportation sets the speed limit for all state-maintained roads, including access-controlled highways, which are highways with medians that require drivers to enter or exit only at interchanges with bridges, inside the town or city limits. For other state-maintained roads within the municipal limits, NCDOT and the town or city must concur before changing the speed limit. Roads are designed for a specific speed. NCDOT may review the speed limit for various reasons, such as part of a study to improve highway safety, or for proposed new developments. Citizens and local officials may also request NCDOT to conduct a speed zone study to determine whether a road has the appropriate speed limits and signage.The department considers several factors when adjusting the speed limit, such as:Alignment of the roadwayTypes of development along the roadwayThe density, or number, of driveways on a corridorHow far one can see the roadCrash historyVarious speed dataOne of the most common types of speed data NCDOT uses is based on the speed at or below which 85 percent of drivers are traveling. NCDOT uses the 85th percentile to help avoid posting speed limits that are artificially low, which can become difficult to enforce. In the absence of strict enforcement, most people drive at the speed they are comfortable with, regardless of the speed limit.MetadataThe metadata for the contained layer of the NCDOT Speed Limit Service is available through the following link:Speed LimitPoint of Contact North Carolina Department of Information Technology -Transportation, GIS UnitGIS Data and Services ConsultantContact information:gishelp@ncdot.govCentury Center – Building B1020 Birch Ridge DriveRaleigh, NC 27610Hours of service: 9:00am - 5:00pm Monday – FridayContact instructions: Please send an email with any issues, questions, or comments regarding the Speed Limit data. If it is an immediate need, please indicate as such in the subject line in an email.NCDOT GIS Unit GO! NC Product TeamLastUpdated: 2024-01-01 00:00:00
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
Speed zones are set to enable drivers travelling at a speed limit to safely respond to potential risks in the road environment. This dataset contains data for NSW speed zones that are categorised as: Ordinary Permanent Shared High Pedestrian School Variable Local Traffic Truck & bus Wet Weather School Bus Toll Plaza
Roadway Posted Speed Limit Signs data consists of point feature geometry which represents the geographic location of posted speed limit signs along public roadways in the State of Maryland. PLEASE NOTE: This layer is now deprecated as of September, 2020 and will be removed in September 2021.Data has been replaced with the following https://maryland.maps.arcgis.com/home/item.html?id=7549d74e31df427a82a64ab5a19d74e3#overviewRoadway Posted Speed Limit Signs data is developed as part of the Highway Performance Monitoring System (HPMS) which maintains and reports transportation related information to the Federal Highway Administration (FHWA) on an annual basis. HPMS is maintained by the Maryland Department of Transportation State Highway Administration (MDOT SHA), under the Office of Planning and Preliminary Engineering (OPPE) Data Services Division (DSD). This data is used by various business units throughout MDOT, as well as many other Federal, State and local government agencies. Roadway Posted Speed Limit Signs data is key to understanding the location of posted speed limit signs throughout the State of Maryland. Roadway Posted Speed Limit Signs data is updated and published on an annual basis for the prior year. This data is for the year 2017.For additional information, contact the MDOT SHA Geospatial Technologies Email: GIS@mdot.state.md.us For additional information related to the Maryland Department of Transportation (MDOT) Website: https://www.mdot.maryland.gov/ For additional information related to the Maryland Department of Transportation State Highway Administration (MDOT SHA) Website: https://roads.maryland.gov/Home.aspx Data Legal Disclaimer: The Maryland Department of Transportation State Highway Administration (MDOT SHA) makes no warranty, expressed or implied, as to the use or appropriateness of geospatial data, and there are no warranties of merchantability or fitness for a particular purpose or use. The information contained in geospatial data is from publicly available sources, but no representation is made as to the accuracy or completeness of geospatial data. MDOT SHA shall not be subject to liability for human error, error due to software conversion, defect, or failure of machines, or any material used in the connection with the machines, including tapes, disks, CD-ROMs or DVD-ROMs and energy. MDOT SHA shall not be liable for any lost profits, consequential damages, or claims against MDOT SHA by third parties.This is a MD iMAP hosted service layer. Find more information at https://imap.maryland.gov.Feature Service Link:https://geodata.md.gov/imap/rest/services/Transportation/MD_RoadwayPostedSpeedLimits/FeatureServer/0
https://data.gov.tw/licensehttps://data.gov.tw/license
The data on provincial highway speed limit signs (Category 5 signs) is exported from the Highway Basic Data Database of the Highway Bureau. In addition to CSV format, the bureau also provides the facility information in KMZ format for reference.
MIT Licensehttps://opensource.org/licenses/MIT
License information was derived automatically
Displays Speed Limit Ordinances for the City of Tucson. Created by copying features from stnetall.PurposeLine Layer that shows the speed limits of streets in Tucson.Dataset ClassificationLevel 0 - OpenKnown UsesUsed in Various Web MapsKnown ErrorsUrban streets from 12000 scale & rural streets from 100000 scale; 1/3 streets rectified to parcel base. 10/2013: While this layer is maintained as a Shapefile, the coverage format is still required for certain nightly processing. Data ContactDepartment of Transportation and MobilityUpdate FrequencyUpdated as needed
The Office of the State Traffic Administration (OSTA) is responsible for approving speed limits on all state roadways in this state per Section 14-218a of the Connecticut General Statutes. Pursuant to Public Act 21-28, the Local Traffic Authority of any town, city or borough may establish, modify and maintain speed limits on all local streets, highways and bridges or in any parking area for ten cars or more or on any private road wholly within the municipality under its jurisdiction, without approval from the OSTA, subject to certain requirements.
CC0 1.0 Universal Public Domain Dedicationhttps://creativecommons.org/publicdomain/zero/1.0/
License information was derived automatically
This map is the result of the balancing framework of the network perspective Provincial Roads 2040 (additional with existing different regime rates). You can see the proposed speed limits on provincial roads, indicating, among other things, which 60 km/h routes have been added to the current network of 60 km/h roads.
https://koordinates.com/license/attribution-3-0/https://koordinates.com/license/attribution-3-0/
The FDOT GIS Roads with Maximum Speed Limits feature class provides spatial information Maximum Speed Limits on Florida Roadways.
Source: http://www.dot.state.fl.us/planning/statistics/gis
Disclaimer: This product has been compiled from the most accurate source data from the Florida Department of Transportation's Transportation Statistics Office. However, this product is for reference purposes only and is not to be construed as a legal document or survey instrument. Any reliance on the information contained herein is at the user's own risk. The Florida Department of Transportation assumes no responsibility for any use of the information contained herein or any loss resulting therefrom.
Thanks to OS MasterMap Highways Network with Speed Data, you can also access road speed information through our product. It’s an additional dataset to help you plan logistics and monitor our roads more effectively.
Perhaps you're looking for more data about Great Britain's roads? Or maybe you're studying drive times or comparing vehicle types along routes or the impact of a new development? This could be the product for you.
We have enhanced our Highways Network family of products with these three speed data additions. Each product is supplied with an additional data file which will be either Average Speed, Speed Limits or a combination of both.
This layer shows the New Zealand Road network with along with the current speed limit applied to the road. This data is generated nightly from the National Speed Limit Register. Please note, some roads have variable, seasonal or emergency speed limits applied. For further detail about a road segment, click the segment in the map to view the full details of the segement.
Explore the interactive maps showing the average delay and average speed on the Strategic Road Network and Local ‘A’ Roads in England, in 2020.
Additional http://bit.ly/COVID_Congestion_Analysis" class="govuk-link">Analysis on the impact of the Coronavirus (COVID-19) pandemic on the road journeys is also available. This story map contains charts and interactive maps for road journeys in England.
On the Strategic Road Network (SRN) for 2020, the average delay is estimated to be 6.7 seconds per vehicle per mile compared to speed limits travel times, a 29.5% decrease compared to 2019.
The average speed is estimated to be 61.8mph, 5.1% up on 2019.
In 2020, on average 42.1% of additional time was needed compared to speed limits travel times, on individual road sections of the SRN to ensure on time arrival. This is down 25.2 percentage points compared to 2019, so on average a lower proportion of additional time is required.
On local ‘A’ roads for 2020, the average delay is estimated to be 33.9 seconds per vehicle per mile compared to free flow travel times. This is a decrease of 22.8% on 2019.
The average speed is estimated to be 27.3 mph. This is an increase of 8.2% on 2019.
Please note a break in the statistical time series for local ‘A’ roads travel times has been highlighted beginning January 2019.
Please note that figures for the SRN and local ‘A’ roads are not directly comparable.
The outbreak of coronavirus (COVID-19) has had a marked impact on everyday life, including on congestion on the road network. As these data are affected by the coronavirus pandemic in the UK, caution should be taken when interpreting these statistics and comparing them with previous time periods. While values had previously been moving towards their pre-lockdown levels, this trend appears to have reversed in the months following September 2020.
Email mailto:congestion.stats@dft.gov.uk">congestion.stats@dft.gov.uk
SRN and local 'A' roads travel time measures 020 7944 3095
</div>
This map provides information on speed limits that are posted on state-maintained roadways in Virginia. Cities and towns set their own speed limits and these are not available to show on the map. Zoom in on the map to display the speed limits. Speed limits exist for all roads however; where this information is not available for mapping, they are not displayed. Most roads where speed limits are not shown are either rural, secondary roads (routes numbered 600 or greater) where a statutory 55 mph speed limit typically applies, or subdivision streets where a statutory 25 mph speed limit usually applies. These statutory speed limits are often are not posted on these roads. Click on any roadway to display the speed limit information.