This dataset provides information on 11 in Massachusetts, United States as of June, 2025. It includes details such as email addresses (where publicly available), phone numbers (where publicly available), and geocoded addresses. Explore market trends, identify potential business partners, and gain valuable insights into the industry. Download a complimentary sample of 10 records to see what's included.

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). Spatial data is georeferenced to the earth surface using the Transverse Mercator projected coordinate system and the North American Datum of 1983. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:6000.

This map service contains both polygon and linear features for the boundaries of the Massachusetts State House of Representatives districts, which were signed into law on November 4, 2021, with Chapter 83 of the Acts of 2021. These boundaries began to be used with the fall 2022 elections and are based on demographic data from the 2020 U.S. Census.Member names from the results of the November 2022 election were populated in January 2023 and updated in February 2024. An update to the attributes due to a special election in the 6th Worcester District was added in June 2024.Member names from the results of the November 2024 election were populated in January 2025.See full metadataFeature service also available.

This map service displays the year in which cities and towns in Massachusetts were first settled by Europeans. The data were gathered by the Secretary of the Commonwealth of Massachusetts. Sources include: 2010 Census Report; Community Profiles, Department of Housing and Community Development; Historic Atlas of Massachusetts, University of Massachusetts Press 1991.Data source: https://www.sec.state.ma.us/divisions/cis/historical/incorporation-settlement.htmFeature service also available.

The U.S. Geological Survey has conducted geologic mapping to characterize the sea floor offshore of Massachusetts. The mapping was carried out using a Simrad Subsea EM 1000 Multibeam Echo Sounder on the Frederick G. Creed on four cruises conducted between 1994 and 1998. The mapping was conducted in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and with support from the Canadian Hydrographic Service and the University of New Brunswick. The long-term goal of this mapping effort is to produce high-resolution geologic maps and a Geographic Information System (GIS) project that presents images and grids of bathymetry, shaded relief bathymetry, and backscatter intensity data from these surveys that will serve the needs of research, management and the public.

A GIS database of geologic units and structural features in Massachusetts, with lithology, age, data structure, and format written and arranged just like the other states.

The U.S. Geological Survey and the University of Massachusetts at Amherst (UMass Amherst), in cooperation with the Massachusetts Department of Environmental Protection (MassDEP), began a series of studies in 2019 to develop a web-based statewide hydraulic modeling tool to provide preliminary culvert designs to support stream crossing replacement projects in Massachusetts. This Web Map Service (WMS) has been developed to query data from the hydraulic models at select stream crossing locations using the StreamStats web application for Massachusetts. The WMS contains stream crossing point locations with hydrology and hydraulic data tables and associated watershed polygons. These stream crossing locations were derived from the North Atlantic Aquatic Connectivity Collaborative data center (NAACC Data Center). Preliminary culvert designs for three-sided box, conspan arch, and a pipe culvert have been modeled using the U.S. Army Corps of Engineer’s Hydrologic Engineering Center’s River Analysis System (HEC-RAS) software with cross-sectional and channel geometry data derived from high-resolution light detection and ranging (lidar) Digital Elevation Models (DEM). The WMS layer provides the ability to generate reports in the StreamStats web application for Massachusetts at the stream crossing locations for site location information, preliminary culvert designs, flood flows, bankfull channel geometry, aquatic habitat and stream connectivity restoration potential, basin characteristics, and other select information.

Massachusetts State House of Representatives 2021 District Boundaries (linear features), as signed into law on November 4, 2021, with Chapter 83 of the Acts of 2021. These boundaries will be used beginning with the fall 2022 elections. These districts were based on demographic data from the 2020 U.S. Census.Member names from the results of the November 2022 election were populated in January 2023 and updated in February 2024. An update to the attributes due to a special election in the 6th Worcester District was added in June 2024.Member names from the results of the November 2024 election were populated in January 2025.See full metadataMap service also available.

Background and Data Limitations The Massachusetts 1830 map series represents a unique data source that depicts land cover and cultural features during the historical period of widespread land clearing for agricultural. To our knowledge, Massachusetts is the only state in the US where detailed land cover information was comprehensively mapped at such an early date. As a result, these maps provide unusual insight into land cover and cultural patterns in 19th century New England. However, as with any historical data, the limitations and appropriate uses of these data must be recognized: (1) These maps were originally developed by many different surveyors across the state, with varying levels of effort and accuracy. (2) It is apparent that original mapping did not follow consistent surveying or drafting protocols; for instance, no consistent minimum mapping unit was identified or used by different surveyors; as a result, whereas some maps depict only large forest blocks, others also depict small wooded areas, suggesting that numerous smaller woodlands may have gone unmapped in many towns. Surveyors also were apparently not consistent in what they mapped as ‘woodlands’: comparison with independently collected tax valuation data from the same time period indicates substantial lack of consistency among towns in the relative amounts of ‘woodlands’, ‘unimproved’ lands, and ‘unimproveable’ lands that were mapped as ‘woodlands’ on the 1830 maps. In some instances, the lack of consistent mapping protocols resulted in substantially different patterns of forest cover being depicted on maps from adjoining towns that may in fact have had relatively similar forest patterns or in woodlands that ‘end’ at a town boundary. (3) The degree to which these maps represent approximations of ‘primary’ woodlands (i.e., areas that were never cleared for agriculture during the historical period, but were generally logged for wood products) varies considerably from town to town, depending on whether agricultural land clearing peaked prior to, during, or substantially after 1830. (4) Despite our efforts to accurately geo-reference and digitize these maps, a variety of additional sources of error were introduced in converting the mapped information to electronic data files (see detailed methods below). Thus, we urge considerable caution in interpreting these maps. Despite these limitations, the 1830 maps present an incredible wealth of information about land cover patterns and cultural features during the early 19th century, a period that continues to exert strong influence on the natural and cultural landscapes of the region.

    Acknowledgements
    Financial support for this project was provided by the BioMap Project of the Massachusetts Natural Heritage and Endangered Species Program, the National Science Foundation, and the Andrew Mellon Foundation. This project is a contribution of the Harvard Forest Long Term Ecological Research Program.

The Digital Surficial Geologic-GIS Map of Minuteman National Historical Site and Vicinity, Massachusetts is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (mima_surficial_geology.gdb), a 2.) Open Geospatial Consortium (OGC) geopackage, and 3.) 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (mima_surficial_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). The OGC geopackage is supported with a QGIS project (.qgz) file. Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) this file (mima_geology.gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (mima_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (mima_surficial_geology_metadata_faq.pdf). Please read the mima_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. Google Earth software is available for free at: http://www.google.com/earth/index.html. QGIS software is available for free at: https://www.qgis.org/en/site/. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (mima_surficial_geology_metadata.txt or mima_surficial_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:50,000 and United States National Map Accuracy Standards features are within (horizontally) 25.4 meters or 83.3 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in Google Earth, ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

This map service contains both polygon and linear features for the boundaries of the Massachusetts State Senate districts, which were signed into law on November 4, 2021, with Chapter 82 of the Acts of 2021. These boundaries began to be used with the fall 2022 elections and are based on demographic data from the 2020 U.S. Census.Member names with the results of the November 2022 election were entered in January 2023 and updated in February 2024.Member names from the results of the November 2024 election were populated in January 2025.See full metadataMap service also available.

This data set contains the sea floor topographic contours, sun-illuminated topographic imagery, and backscatter intensity generated from a multibeam sonar survey of the Stellwagen Bank National Marine Sanctuary region off Boston, Massachusetts, an area of approximately 1100 square nautical miles. The Stellwagen Bank NMS Mapping Project is designed to provide detailed maps of the Stellwagen Bank region's environments and habitats and the first complete multibeam topographic and sea floor characterization maps of a significant region of the shallow EEZ. Data were collected on four cruises over a two year period from the fall of 1994 to the fall of 1996. The surveys were conducted aboard the Candian Hydrographic Service vessel Frederick G. Creed, a SWATH (Small Waterplane Twin Hull) ship that surveys at speeds of 16 knots. The multibeam data were collected utilizing a Simrad Subsea EM 1000 Multibeam Echo Sounder (95 kHz) that is permanently installed in the hull of the Creed.

This public map service contains points and polygons representing information from the Massachusetts Cultural Resource Information System (MACRIS) database and related records on file at the Massachusetts Historical Commission (MHC), including the Inventory of Historic Assets of the Commonwealth, National Register of Historic Places nomination forms, local historic district study reports, local landmark reports, and other materials. The MACRIS database and the layers within the MACRIS Maps web application are updated regularly as new information is submitted and added, and as the accuracy of earlier versions of the datalayer is improved. Three datalayers are being made available to the public: The Inventory Points layer contains the locations of buildings, burial grounds, structures, and objects (e.g. statues, monuments, walls). The points layer is symbolized to indicate the most common historic designation types: 1) National Register of Historic Places, 2) local historic district, 3) both National Register and local historic district, 4) Preservation Restriction, 5) Massachusetts Historic Landmark (MA/HL) and 6) inventoried but not designated with one of the previous designations. Less common designations are not symbolized in MACRIS, but are included in the Designations attribute field.The Inventory Areas polygon layer includes areas and districts symbolized in MACRIS in a similar manner to Inventory Points. Another polygon layer, Towns, possesses a binary “y” or blank field to indicate whether a town has a survey pending digitization. Please note that new and updated information is added to MHC files daily, and that there may be considerable lag time before this information is reflected in MACRIS or in MACRIS Maps. Map information for “completed” towns may not reflect the most current information on file with MHC. For additional information, users may consult the source records, forms and maps that make up the official Inventory of Historic and Archaeological Assets of the Commonwealth, on file at the MHC, Massachusetts Archives Building, 220 Morrissey Boulevard, Boston, during weekday business hours. No appointment is needed. For directions, see https://www.sec.state.ma.us/mhc/.See the metadata for more details.

The U.S. Geological Survey has conducted geologic mapping to characterize the sea floor offshore of Massachusetts. The mapping was carried out using a Simrad Subsea EM 1000 Multibeam Echo Sounder on the Frederick G. Creed on four cruises conducted between 1994 and 1998. The mapping was conducted in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and with support from the Canadian Hydrographic Service and the University of New Brunswick. The long-term goal of this mapping effort is to produce high-resolution geologic maps and a Geographic Information System (GIS) project that presents images and grids of bathymetry, shaded relief bathymetry, and backscatter intensity data from these surveys that will serve the needs of research, management and the public.

The Digital Bedrock Geologic-GIS Map of Minuteman National Historical Site and Vicinity, Massachusetts is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (mima_bedrock_geology.gdb), a 2.) Open Geospatial Consortium (OGC) geopackage, and 3.) 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (mima_bedrock_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). The OGC geopackage is supported with a QGIS project (.qgz) file. Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) this file (mima_geology.gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (mima_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (mima_bedrock_geology_metadata_faq.pdf). Please read the mima_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. Google Earth software is available for free at: http://www.google.com/earth/index.html. QGIS software is available for free at: https://www.qgis.org/en/site/. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: Boston College and U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (mima_bedrock_geology_metadata.txt or mima_bedrock_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:24,000 and United States National Map Accuracy Standards features are within (horizontally) 25.4 meters or 83.3 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in Google Earth, ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

The symbology of the data in this hosted tile layer is optimized for display atop aerial (ortho) imagery. Tiles are available for levels 7 through 20.Map Features for imagery include:

Political Boundaries: Massachusetts cities and towns, counties and state border, MassGIS).Transportation: Massachusetts Department of Transportation (MassDOT) Roads (MassDOT, MassGIS); MBTA subway and Commuter Rail lines and stations (Central Transportation Planning Staff, MassGIS); Airports, Ferry Routes and Seaports (MassDOT); Airport Runways and Airfields (Massachusetts Emergency Management Agency (MEMA)).Infrastructure and Facilities: Lighthouses and Lights (Massachusetts Coastal Zone Management); Licensed Child Care Programs (Department of Early Education and Care); Schools (Pre-K-High School) (Massachusetts Department of Education, MassGIS); Colleges and Universities (MassGIS); Acute Care Hospitals and Non-acute Care Hospitals (Massachusetts Department of Public Health Office of Emergency Medical Services, CHIA); Libraries, Police Stations, Fire Stations, Town Halls, Places of Worship, Courthouses, Prisons, DCR Pools.This service is used in the MassGIS Image Basemap.

The U.S. Geological Survey has conducted geologic mapping to characterize the sea floor offshore of Massachusetts. The mapping was carried out using a Simrad Subsea EM 1000 Multibeam Echo Sounder on the Frederick G. Creed on four cruises conducted between 1994 and 1998. The mapping was conducted in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and with support from the Canadian Hydrographic Service and the University of New Brunswick. The long-term goal of this mapping effort is to produce high-resolution geologic maps and a Geographic Information System (GIS) project that presents images and grids of bathymetry, shaded relief bathymetry, and backscatter intensity data from these surveys that will serve the needs of research, management and the public.

This map service contains both polygon and linear features for the boundaries of the Massachusetts State Senate districts, which were signed into law on November 4, 2021, with Chapter 82 of the Acts of 2021. These boundaries began to be used with the fall 2022 elections and are based on demographic data from the 2020 U.S. Census.Member names with the results of the November 2022 election were entered in January 2023 and updated in February 2024.Member names from the results of the November 2024 election were populated in January 2025.See full metadataFeature service also available.

In Spring 2019, with funding from several State partners, MassGIS contracted with the U.S. Geological Survey for statewide, 15 cm resolution, 16-bit, 4-band (RGB-IR) digital orthophotos. The data were delivered in early 2020 as 10,218 individual 1,500 m x 1,500 m tiles in a GeoTIFF format. To allow for easier distribution of this free imagery, MassGIS compressed the GeoTIFFS into the JPEG 2000 format, which retains the IR band. The tile naming convention is based on the U.S. National Grid (USNG), taking the coordinates of the southwest corner of the tile.Project specifications are based on the American Society of Photogrammetry and Remote Sensing (ASPRS) standards. The data were developed based on a horizontal projection/datum of NAD 1983 2011 UTM zones 18N and 19N meters and a vertical projection/datum of NAVD 88 (GEOID 12B) meters.This digital orthoimagery was created to provide easily accessible geospatial data which are readily available to enhance the capability of federal, state, and local emergency responders, as well as to plan for homeland security efforts. These data also support The National Map.These images can serve a variety of purposes, from general planning to field reference for spatial analysis, to a tool for data development and revision of vector maps. The imagery can also serve as a reference layer or basemap for myriad applications inside geographic information system (GIS) software and web-based maps.This image service was created using JPEG 2000 versions of the imagery that MassGIS converted from GeoTiffs and distributes online.For more information see the imagery's MassGIS metadata page.

The precincts displayed on this map were developed based on the 2020 U.S Census blocks and revised by the City of Boston Election Commission to conform to the voting precinct guidelines. These precincts were adopted in 2022 by the Board of Election Commission and by the MA State Legislature. Sources: U.S. Census, voter Registration database, and Massachusetts Secretary of the Commonwealth. This map is intended for planning and visualization purposes only.