Reporting of new Aggregate Case and Death Count data was discontinued May 11, 2023, with the expiration of the COVID-19 public health emergency declaration. This dataset will receive a final update on June 1, 2023, to reconcile historical data through May 10, 2023, and will remain publicly available.

Aggregate Data Collection Process Since the start of the COVID-19 pandemic, data have been gathered through a robust process with the following steps:

• A CDC data team reviews and validates the information obtained from jurisdictions’ state and local websites via an overnight data review process.
• If more than one official county data source exists, CDC uses a comprehensive data selection process comparing each official county data source, and takes the highest case and death counts respectively, unless otherwise specified by the state.
• CDC compiles these data and posts the finalized information on COVID Data Tracker.
• County level data is aggregated to obtain state and territory specific totals.

This process is collaborative, with CDC and jurisdictions working together to ensure the accuracy of COVID-19 case and death numbers. County counts provide the most up-to-date numbers on cases and deaths by report date. CDC may retrospectively update counts to correct data quality issues.

Methodology Changes Several differences exist between the current, weekly-updated dataset and the archived version:

• Source: The current Weekly-Updated Version is based on county-level aggregate count data, while the Archived Version is based on State-level aggregate count data.
• Confirmed/Probable Cases/Death breakdown:  While the probable cases and deaths are included in the total case and total death counts in both versions (if applicable), they were reported separately from the confirmed cases and deaths by jurisdiction in the Archived Version.  In the current Weekly-Updated Version, the counts by jurisdiction are not reported by confirmed or probable status (See Confirmed and Probable Counts section for more detail).
• Time Series Frequency: The current Weekly-Updated Version contains weekly time series data (i.e., one record per week per jurisdiction), while the Archived Version contains daily time series data (i.e., one record per day per jurisdiction).
• Update Frequency: The current Weekly-Updated Version is updated weekly, while the Archived Version was updated twice daily up to October 20, 2022.

Important note: The counts reflected during a given time period in this dataset may not match the counts reflected for the same time period in the archived dataset noted above. Discrepancies may exist due to differences between county and state COVID-19 case surveillance and reconciliation efforts.

Confirmed and Probable Counts In this dataset, counts by jurisdiction are not displayed by confirmed or probable status. Instead, confirmed and probable cases and deaths are included in the Total Cases and Total Deaths columns, when available. Not all jurisdictions report probable cases and deaths to CDC.* Confirmed and probable case definition criteria are described here:

Council of State and Territorial Epidemiologists (ymaws.com).

Deaths CDC reports death data on other sections of the website: CDC COVID Data Tracker: Home, CDC COVID Data Tracker: Cases, Deaths, and Testing, and NCHS Provisional Death Counts. Information presented on the COVID Data Tracker pages is based on the same source (total case counts) as the present dataset; however, NCHS Death Counts are based on death certificates that use information reported by physicians, medical examiners, or coroners in the cause-of-death section of each certificate. Data from each of these pages are considered provisional (not complete and pending verification) and are therefore subject to change. Counts from previous weeks are continually revised as more records are received and processed.

Number of Jurisdictions Reporting There are currently 60 public health jurisdictions reporting cases of COVID-19. This includes the 50 states, the District of Columbia, New York City, the U.S. territories of American Samoa, Guam, the Commonwealth of the Northern Mariana Islands, Puerto Rico, and the U.S Virgin Islands as well as three independent countries in compacts of free association with the United States, Federated States of Micronesia, Republic of the Marshall Islands, and Republic of Palau. New York State’s reported case and death counts do not include New York City’s counts as they separately report nationally notifiable conditions to CDC.

CDC COVID-19 data are available to the public as summary or aggregate count files, including total counts of cases and deaths, available by state and by county. These and other data on COVID-19 are available from multiple public locations, such as:

https://www.cdc.gov/coronavirus/2019-ncov/cases-updates/cases-in-us.html

https://www.cdc.gov/covid-data-tracker/index.html

https://www.cdc.gov/coronavirus/2019-ncov/covid-data/covidview/index.html

https://www.cdc.gov/coronavirus/2019-ncov/php/open-america/surveillance-data-analytics.html

Additional COVID-19 public use datasets, include line-level (patient-level) data, are available at: https://data.cdc.gov/browse?tags=covid-19.

Archived Data Notes:

November 3, 2022: Due to a reporting cadence issue, case rates for Missouri counties are calculated based on 11 days’ worth of case count data in the Weekly United States COVID-19 Cases and Deaths by State data released on November 3, 2022, instead of the customary 7 days’ worth of data.

November 10, 2022: Due to a reporting cadence change, case rates for Alabama counties are calculated based on 13 days’ worth of case count data in the Weekly United States COVID-19 Cases and Deaths by State data released on November 10, 2022, instead of the customary 7 days’ worth of data.

November 10, 2022: Per the request of the jurisdiction, cases and deaths among non-residents have been removed from all Hawaii county totals throughout the entire time series. Cumulative case and death counts reported by CDC will no longer match Hawaii’s COVID-19 Dashboard, which still includes non-resident cases and deaths. 

November 17, 2022: Two new columns, weekly historic cases and weekly historic deaths, were added to this dataset on November 17, 2022. These columns reflect case and death counts that were reported that week but were historical in nature and not reflective of the current burden within the jurisdiction. These historical cases and deaths are not included in the new weekly case and new weekly death columns; however, they are reflected in the cumulative totals provided for each jurisdiction. These data are used to account for artificial increases in case and death totals due to batched reporting of historical data.

December 1, 2022: Due to cadence changes over the Thanksgiving holiday, case rates for all Ohio counties are reported as 0 in the data released on December 1, 2022.

January 5, 2023: Due to North Carolina’s holiday reporting cadence, aggregate case and death data will contain 14 days’ worth of data instead of the customary 7 days. As a result, case and death metrics will appear higher than expected in the January 5, 2023, weekly release.

January 12, 2023: Due to data processing delays, Mississippi’s aggregate case and death data will be reported as 0. As a result, case and death metrics will appear lower than expected in the January 12, 2023, weekly release.

January 19, 2023: Due to a reporting cadence issue, Mississippi’s aggregate case and death data will be calculated based on 14 days’ worth of data instead of the customary 7 days in the January 19, 2023, weekly release.

January 26, 2023: Due to a reporting backlog of historic COVID-19 cases, case rates for two Michigan counties (Livingston and Washtenaw) were higher than expected in the January 19, 2023 weekly release.

January 26, 2023: Due to a backlog of historic COVID-19 cases being reported this week, aggregate case and death counts in Charlotte County and Sarasota County, Florida, will appear higher than expected in the January 26, 2023 weekly release.

January 26, 2023: Due to data processing delays, Mississippi’s aggregate case and death data will be reported as 0 in the weekly release posted on January 26, 2023.

February 2, 2023: As of the data collection deadline, CDC observed an abnormally large increase in aggregate COVID-19 cases and deaths reported for Washington State. In response, totals for new cases and new deaths released on February 2, 2023, have been displayed as zero at the state level until the issue is addressed with state officials. CDC is working with state officials to address the issue.

February 2, 2023: Due to a decrease reported in cumulative case counts by Wyoming, case rates will be reported as 0 in the February 2, 2023, weekly release. CDC is working with state officials to verify the data submitted.

February 16, 2023: Due to data processing delays, Utah’s aggregate case and death data will be reported as 0 in the weekly release posted on February 16, 2023. As a result, case and death metrics will appear lower than expected and should be interpreted with caution.

February 16, 2023: Due to a reporting cadence change, Maine’s

The Indian state of Punjab reported the highest number of active coronavirus (COVID-19) cases of over one thousand cases as of October 20, 2023. Kerala and Karnataka followed, with relatively lower casualties. That day, there were a total of over 44 million confirmed infections across India.

Note: DPH is updating and streamlining the COVID-19 cases, deaths, and testing data. As of 6/27/2022, the data will be published in four tables instead of twelve. The COVID-19 Cases, Deaths, and Tests by Day dataset contains cases and test data by date of sample submission. The death data are by date of death. This dataset is updated daily and contains information back to the beginning of the pandemic. The data can be found at https://data.ct.gov/Health-and-Human-Services/COVID-19-Cases-Deaths-and-Tests-by-Day/g9vi-2ahj. The COVID-19 State Metrics dataset contains over 93 columns of data. This dataset is updated daily and currently contains information starting June 21, 2022 to the present. The data can be found at https://data.ct.gov/Health-and-Human-Services/COVID-19-State-Level-Data/qmgw-5kp6 . The COVID-19 County Metrics dataset contains 25 columns of data. This dataset is updated daily and currently contains information starting June 16, 2022 to the present. The data can be found at https://data.ct.gov/Health-and-Human-Services/COVID-19-County-Level-Data/ujiq-dy22 . The COVID-19 Town Metrics dataset contains 16 columns of data. This dataset is updated daily and currently contains information starting June 16, 2022 to the present. The data can be found at https://data.ct.gov/Health-and-Human-Services/COVID-19-Town-Level-Data/icxw-cada . To protect confidentiality, if a town has fewer than 5 cases or positive NAAT tests over the past 7 days, those data will be suppressed. COVID-19 cases and associated deaths that have been reported among Connecticut residents, broken out by age group. All data in this report are preliminary; data for previous dates will be updated as new reports are received and data errors are corrected. Deaths reported to the either the Office of the Chief Medical Examiner (OCME) or Department of Public Health (DPH) are included in the daily COVID-19 update. Data are reported daily, with timestamps indicated in the daily briefings posted at: portal.ct.gov/coronavirus. Data are subject to future revision as reporting changes. Starting in July 2020, this dataset will be updated every weekday. Additional notes: A delay in the data pull schedule occurred on 06/23/2020. Data from 06/22/2020 was processed on 06/23/2020 at 3:30 PM. The normal data cycle resumed with the data for 06/23/2020. A network outage on 05/19/2020 resulted in a change in the data pull schedule. Data from 5/19/2020 was processed on 05/20/2020 at 12:00 PM. Data from 5/20/2020 was processed on 5/20/2020 8:30 PM. The normal data cycle resumed on 05/20/2020 with the 8:30 PM data pull. As a result of the network outage, the timestamp on the datasets on the Open Data Portal differ from the timestamp in DPH's daily PDF reports. Starting 5/10/2021, the date field will represent the date this data was updated on data.ct.gov. Previously the date the data was pulled by DPH was listed, which typically coincided with the date before the data was published on data.ct.gov. This change was made to standardize the COVID-19 data sets on data.ct.gov.

Based on a comparison of coronavirus deaths in 210 countries relative to their population, Peru had the most losses to COVID-19 up until July 13, 2022. As of the same date, the virus had infected over 557.8 million people worldwide, and the number of deaths had totaled more than 6.3 million. Note, however, that COVID-19 test rates can vary per country. Additionally, big differences show up between countries when combining the number of deaths against confirmed COVID-19 cases. The source seemingly does not differentiate between "the Wuhan strain" (2019-nCOV) of COVID-19, "the Kent mutation" (B.1.1.7) that appeared in the UK in late 2020, the 2021 Delta variant (B.1.617.2) from India or the Omicron variant (B.1.1.529) from South Africa.

The difficulties of death figures

This table aims to provide a complete picture on the topic, but it very much relies on data that has become more difficult to compare. As the coronavirus pandemic developed across the world, countries already used different methods to count fatalities, and they sometimes changed them during the course of the pandemic. On April 16, for example, the Chinese city of Wuhan added a 50 percent increase in their death figures to account for community deaths. These deaths occurred outside of hospitals and went unaccounted for so far. The state of New York did something similar two days before, revising their figures with 3,700 new deaths as they started to include “assumed” coronavirus victims. The United Kingdom started counting deaths in care homes and private households on April 29, adjusting their number with about 5,000 new deaths (which were corrected lowered again by the same amount on August 18). This makes an already difficult comparison even more difficult. Belgium, for example, counts suspected coronavirus deaths in their figures, whereas other countries have not done that (yet). This means two things. First, it could have a big impact on both current as well as future figures. On April 16 already, UK health experts stated that if their numbers were corrected for community deaths like in Wuhan, the UK number would change from 205 to “above 300”. This is exactly what happened two weeks later. Second, it is difficult to pinpoint exactly which countries already have “revised” numbers (like Belgium, Wuhan or New York) and which ones do not. One work-around could be to look at (freely accessible) timelines that track the reported daily increase of deaths in certain countries. Several of these are available on our platform, such as for Belgium, Italy and Sweden. A sudden large increase might be an indicator that the domestic sources changed their methodology.

Where are these numbers coming from?

The numbers shown here were collected by Johns Hopkins University, a source that manually checks the data with domestic health authorities. For the majority of countries, this is from national authorities. In some cases, like China, the United States, Canada or Australia, city reports or other various state authorities were consulted. In this statistic, these separately reported numbers were put together. For more information or other freely accessible content, please visit our dedicated Facts and Figures page.

Analysis of ‘Latest Covid-19 India Statewise Data’ provided by Analyst-2 (analyst-2.ai), based on source dataset retrieved from https://www.kaggle.com/anandhuh/latest-covid19-india-statewise-data on 28 January 2022.

--- Dataset description provided by original source is as follows ---

About

This dataset contains latest Covid-19 India state-wise data as on January 13, 2022. This dataset can be used to analyze covid in India. This dataset is great for Exploratory Data Analysis

Attribute Information

1. State/UTs - Names of Indian States and Union Territories.
2. Total Cases - Total number of confirmed cases
3. Active - Total number of active cases
4. Discharged - Total number of discharged cases
5. Deaths - Total number of deaths
6. Active Ratio (%) - Ratio of number of active cases to total cases
7. Discharge Ratio (%) - Ratio of number of discharged cases to total cases
8. Death Ratio (%) - Ratio of number of deaths to total cases
9. Population - Population of State/UT

Source

Covid Data : https://www.mygov.in/covid-19 Population Data : https://www.indiacensus.net/

Other Updated Covid Datasets

https://www.kaggle.com/anandhuh/datasets Please appreciate the effort with an upvote 👍

Thank You

--- Original source retains full ownership of the source dataset ---

As of May 2, 2023, the outbreak of the coronavirus disease (COVID-19) had been confirmed in almost every country in the world. The virus had infected over 687 million people worldwide, and the number of deaths had reached almost 6.87 million. The most severely affected countries include the U.S., India, and Brazil.

COVID-19: background information COVID-19 is a novel coronavirus that had not previously been identified in humans. The first case was detected in the Hubei province of China at the end of December 2019. The virus is highly transmissible and coughing and sneezing are the most common forms of transmission, which is similar to the outbreak of the SARS coronavirus that began in 2002 and was thought to have spread via cough and sneeze droplets expelled into the air by infected persons.

Naming the coronavirus disease Coronaviruses are a group of viruses that can be transmitted between animals and people, causing illnesses that may range from the common cold to more severe respiratory syndromes. In February 2020, the International Committee on Taxonomy of Viruses and the World Health Organization announced official names for both the virus and the disease it causes: SARS-CoV-2 and COVID-19, respectively. The name of the disease is derived from the words corona, virus, and disease, while the number 19 represents the year that it emerged.

India reported almost 45 million cases of the coronavirus (COVID-19) as of October 20, 2023, with more than 44 million recoveries and about 532 thousand fatalities. The number of cases in the country had a decreasing trend in the past months.

Burden on the healthcare system

With the world's second largest population in addition to an even worse second wave of the coronavirus pandemic seems to be crushing an already inadequate healthcare system. Despite vast numbers being vaccinated, a new variant seemed to be affecting younger age groups this time around. The lack of ICU beds, black market sales of oxygen cylinders and drugs needed to treat COVID-19, as well as overworked crematoriums resorting to mass burials added to the woes of the country. Foreign aid was promised from various countries including the United States, France, Germany and the United Kingdom. Additionally, funding from the central government was expected to boost vaccine production.

Situation overview
Even though days in April 2021 saw record-breaking numbers compared to any other country worldwide, a nation-wide lockdown has not been implemented. The largest religious gathering - the Kumbh Mela, sacred to the Hindus, along with election rallies in certain states continue to be held. Some states and union territories including Maharashtra, Delhi, and Karnataka had issued curfews and lockdowns to try to curb the spread of infections.

Coronavirus Pandemic In India

Coronavirus is spread rapidly in India with already lockdown in 32 States and Union Territories in India, we need to analyse, visualize and estimate the spread.

Content

Data contains 6 columns and 26 rows. Column 1: Sl. no. Column 2: Name of State / UT Column 3: Total Confirmed cases (Indian National) Column 4: Total Confirmed cases ( Foreign National ) Column 5: Cured/Discharged/Migrated Column 6: Death

Row 26 Contains total cases, you can also drop this.

Acknowledgements

We wouldn't be here without the help of others. If you owe any attributions or thanks, include them here along with any citations of past research. Data is taken from: https://mohfw.gov.in

About

This dataset contains latest Covid-19 India state-wise data as on December 05, 2021. This dataset can be used to analyze covid in India. This dataset is great for Exploratory Data Analysis

Attribute Information

1. State/UTs - Names of Indian States and Union Territories.
2. Total Cases - Total number of confirmed cases
3. Active - Total number of active cases
4. Discharged - Total number of discharged cases
5. Deaths - Total number of deaths
6. Active Ratio (%) - Ratio of number of active cases to total cases
7. Discharge Ratio (%) - Ratio of number of discharged cases to total cases
8. Death Ratio (%) - Ratio of number of deaths to total cases
9. Population - Population of State/UT

Source

Covid Data : https://www.mygov.in/covid-19 Population Data : https://www.indiacensus.net/

Other Updated Covid Datasets

https://www.kaggle.com/anandhuh/datasets Please appreciate the effort with an upvote 👍

Thank You

Context

The United States have recently become the country with the most reported cases of 2019 Novel Coronavirus (COVID-19). This dataset contains daily updated number of reported cases & deaths in the US on the state and county level, as provided by the Johns Hopkins University. In addition, I provide matching demographic information for US counties.

Content

The dataset consists of two main csv files: covid_us_county.csv and us_county.csv. See the column descriptions below for more detailed information. In addition, I've added US county shape files for geospatial plots: us_county.shp/dbf/prj/shx.

• covid_us_county.csv: COVID-19 cases and deaths which will be updated daily. The data is provided by the Johns Hopkins University through their excellent github repo. I combined the separate "confirmed cases" and "deaths" files into a single table, removed a few (I think to be) redundant geo identifier columns, and reshaped the data into long format with a single date column. The earliest recorded cases are from 2020-01-22.

• us_counties.csv: Demographic information on the US county level based on the (most recent) 2014-18 release of the Amercian Community Survey. Derived via the great tidycensus package.

Column Description

COVID-19 dataset covid_us_county.csv:

• fips: County code in numeric format (i.e. no leading zeros). A small number of cases have NA values here, but can still be used for state-wise aggregation. Currently, this only affect the states of Massachusetts and Missouri.

• county: Name of the US county. This is NA for the (aggregated counts of the) territories of American Samoa, Guam, Northern Mariana Islands, Puerto Rico, and Virgin Islands.

• state: Name of US state or territory.

• state_code: Two letter abbreviation of US state (e.g. "CA" for "California"). This feature has NA values for the territories listed above.

• lat and long: coordinates of the county or territory.

• date: Reporting date.

• cases & deaths: Cumulative numbers for cases & deaths.

Demographic dataset us_counties.csv:

• fips, county, state, state_code: same as above. The county names are slightly different, but mostly the difference is that this dataset has the word "County" added. I recommend to join on fips.

• male & female: Population numbers for male and female.

• population: Total population for the county. Provided as convenience feature; is always the sum of male + female.

• female_percentage: Another convenience feature: female / population in percent.

• median_age: Overall median age for the county.

Acknowledgements

Data provided for educational and academic research purposes by the Johns Hopkins University Center for Systems Science and Engineering (JHU CSSE).

Licence

The github repo states that:

This GitHub repo and its contents herein, including all data, mapping, and analysis, copyright 2020 Johns Hopkins University, all rights reserved, is provided to the public strictly for educational and academic research purposes. The Website relies upon publicly available data from multiple sources, that do not always agree. The Johns Hopkins University hereby disclaims any and all representations and warranties with respect to the Website, including accuracy, fitness for use, and merchantability. Reliance on the Website for medical guidance or use of the Website in commerce is strictly prohibited.

Version history

• In version 1, a small number of cases had values of `county == "Unassigned". Those have been superseded.
• Version 5: added US county shape files

Analysis of ‘us-statewise-covid data’ provided by Analyst-2 (analyst-2.ai), based on source dataset retrieved from https://www.kaggle.com/dhamur/usstatewisecovid-data on 28 January 2022.

--- Dataset description provided by original source is as follows ---

About the data

This is a covid19 data set from United States. It includes date, Number of cases, Number of deaths. The other countries data are also available in my Kaggle and Github profile. The links are provided below - Github - Kaggle If you want to read more about the data Click here

--- Original source retains full ownership of the source dataset ---

This dataset contains the latest Covid-19 WORLD state-wise data in detail from 2/24/2020 to 6/29/2021. This dataset can be used to analyze covid conditions in the World. This dataset is great for Exploratory Data Analysis. they are 99k rows to work with.

If you find this dataset useful, please consider upvoting ✊

In October 2020, Tripura recorded the highest COVID-19 deaths per million people compared to to other states and Union territories with ** deaths. Uttarakhand followed with over ** deaths per million people.

Indicators such as case fatality and doubling time are used to measure the spread of the disease. The total deaths per million is considered to be a good indicator, to better measure and understand, the efficacy of the measures undertaken to control the spread of the virus. A slacked increase along with a fall in the number of new deaths per day is suggestive of a good control indicator.

This dataset provides values for CORONAVIRUS DEATHS reported in several countries. The data includes current values, previous releases, historical highs and record lows, release frequency, reported unit and currency.

As of May 2, 2023, the outbreak of the coronavirus disease (COVID-19) had spread to almost every country in the world, and more than 6.86 million people had died after contracting the respiratory virus. Over 1.16 million of these deaths occurred in the United States.

Waves of infections Almost every country and territory worldwide have been affected by the COVID-19 disease. At the end of 2021 the virus was once again circulating at very high rates, even in countries with relatively high vaccination rates such as the United States and Germany. As rates of new infections increased, some countries in Europe, like Germany and Austria, tightened restrictions once again, specifically targeting those who were not yet vaccinated. However, by spring 2022, rates of new infections had decreased in many countries and restrictions were once again lifted.

What are the symptoms of the virus? It can take up to 14 days for symptoms of the illness to start being noticed. The most commonly reported symptoms are a fever and a dry cough, leading to shortness of breath. The early symptoms are similar to other common viruses such as the common cold and flu. These illnesses spread more during cold months, but there is no conclusive evidence to suggest that temperature impacts the spread of the SARS-CoV-2 virus. Medical advice should be sought if you are experiencing any of these symptoms.

Dataset

This dataset was created by Deepak Rajpurohit

Contents

Context

India state wise latest data

Analysis of ‘Latest COVID-19 India Statewise Vaccine Data’ provided by Analyst-2 (analyst-2.ai), based on source dataset retrieved from https://www.kaggle.com/anandhuh/covid19-india-statewise-vaccine-data on 13 February 2022.

--- Dataset description provided by original source is as follows ---

Content

Covid-19 Vaccine data from all the states and union territories of India as on February 05, 2022.

Attribute Information

State/UTs - Names of states and union territories of India Total Vaccination Doses- Total number of vaccine doses given Dose 1 - Number of first dose of vaccine given Dose 2 - Number of second dose of vaccine given Population - Population of the state/UT

Source

Vaccine Data : https://www.mygov.in/covid-19 Population Data : https://www.indiacensus.net/

Other Updated Covid19 Datasets

https://www.kaggle.com/anandhuh/datasets

If you find it useful, please support by upvoting 👍

Thank You

--- Original source retains full ownership of the source dataset ---

This Dataset contains day-wise cumulative total positive cases, active cases, recoveries and death statistics due to COVID-19 in India up to 10 June 2024

Context

Coronaviruses are a large family of viruses which may cause illness in animals or humans. In humans, several coronaviruses are known to cause respiratory infections ranging from the common cold to more severe diseases such as MERS and SARS. The most recently discovered coronavirus causes COVID-19 - World Health Organization (WHO).

The number of new cases is increasing day by day around the world. This dataset has information for states of India at a daily level.

Content

COVID-19 cases at a daily level is present in COVID_19_INDIA.csv file

Acknowledgements

Thanks to the Indian Ministry of Health & Family Welfare for making the data available to the general public.

Thanks to covid19india.org for making the individual level details and testing details available to the general public.

Context

This is a Covid 19 data set for India. The data set is updated frequently and is analysed using tableau. Click on the link to visit the tableau story. Click each of the caption in the story to unveil its content.

https://public.tableau.com/profile/ambili.nair#!/vizhome/COVID19Indiastory/Indiastory?publish=yes

The first Covid 19 case in India was reported on 30th January 2020 in South Indian state of Kerala on a medical student who was pursuing the studies at Wuhan University, China. Two more students were found to be infected in Kerala in the consecutive days. The Kerala government was successful in containing the disease with its proactive measures back then. The second outbreak of Covid 19 in India started in the first week of March from various parts of India in various people who visited the foreign countries and in some of the tourists from different countries.

The tableau story consists of the following data analysis : 1. State-wise number of infected and number of death count in India map. Hover the mouse on each state in the India map to know the count. 2. Click on the next caption to know the state-wise number of confirmed, active, recovered and deceased cases in the form of bar chart. 3. The next caption takes you to the bar chart which shows the number of cases getting confirmed in India each day starting from January 30, 2020. 4. Next caption takes us to an analysis of the Mortality rate and the Recovery rate (in percentage) of each of the Indian state. We get an idea how hard each of the state is hit by the pandemic. 5. Next caption gives a detailed analysis of the state Kerala which has the mortality rate of 0.806% and the recovery rate of 74.4% as of now. Hover the mouse to know the count in each district. Don't forget to have a look at the line graph of 'number of active cases' in Kerala. It looks almost flattened ! As everyday we hear the increasing number of cases and deaths across the country, this graph may make you feel better...! 6. Finally the caption takes you to the statistics from the topmost district of Kerala - Kasaragod. The total number of cases reported is 179 at Kasaragod. The active number of cases is just 12 as of now... !!! Have a look at the statistics from Kasaragod and the story of 'Kasaragod model' as some of the national media in India call it !!!

Content

This data set consists of the following data: 1. state-wise statistics - Confirmed, Active, Recovered, Deceased cases 2. day-wise count of infected and deceased from various states 3. Statistics from Kerala - day-wise count of confirmed, Active, Recovered, Deceased cases 4. Statistics from Kasaragod district, Kerala - day-wise count of confirmed, Active, Recovered, Deceased cases 5. Count of confirmed cases from various districts of India

Acknowledgements

Ministry of Health and Family Welfare - India covid19india.org Wikipedia page - Covid 19 Pandemic India Govt. of Kerala dashboard - official Kerala Covid 19 statistics

Inspiration

Inspiration

Your data will be in front of the world's largest data science community. What questions do you want to see answered?