This map shows the oil and natural gas wells across the United States. Oil and Natural Gas Well: A hole drilled in the earth for the purpose of finding or producing crude oil or natural gas; or producing services related to the production of crude or natural gas. Geographic coverage includes the United States (Alabama, Alaska, Arizona, Arkansas, California, Colorado, Florida, Illinois, Indiana, Kansas, Kentucky, Louisiana, Maryland, Michigan, Mississippi, Missouri, Montana, North Dakota, Nebraska, Nevada, New Mexico, New York, Ohio, Oklahoma, Oregon, Pennsylvania, South Dakota, Tennessee, Texas, Utah, Virginia, Washington, West Virginia, Wyoming) as well Oil and Natural Gas wells in the Canadian provinces of British Columbia and Manitoba that are within 100 miles of the country's border with the United States. According to the Energy Information Administration (EIA) the following states do not have active/producing Oil or Natural Gas Wells: Connecticut, Delaware, District of Columbia, Georgia, Hawaii, Iowa, Idaho, Massachusetts, Maine, Minnesota, North Carolina, New Hampshire, New Jersey, Rhode Island, South Carolina, Vermont, and Wisconsin. Some states do have wells for underground Natural Gas storage facilities where these have been identified they were included. This layer is derived from well data from individual states and provinces and United States Agencies. This layer is complete for the United States but further development of data missing from two Canadian provinces and Mexico is in process. This update release includes an additional 497,036 wells covering Texas. Oil and gas exploration in Texas takes advantage of drilling technology to use a single surface well drilling location to drill multiple bottom hole well connections to extract oil and gas. The addition of Well data from Texas results in the addition of a related table to support this one surface well to many bottom hole connections. This related table provides records for Wells that have more than one bottom hole linked to the surface well. Sourced from the HIFLD Open Data Portal for Energy.

Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data are current as of April 2001.

The digital data was generated from the Geographic Information System of the Railroad Commission of Texas. Base map information was obtained directly from U.S. Geological Survey 7.5 minute quadrangle maps. Patent Survey lines from Texas General Land Office maps were interpreted as accurately as possible over the US Geological Survey base. Oil and gas well data or pipeline data (if included) was obtained from public records at the Railroad Commission. The information provided by this system is being continually updated and refined. The data is intended solely for the internal use of the Railroad Commission, which makes no claim as to its accuracy or completeness.Field Definitions can be found at: https://rrc.texas.gov/media/kmld3uzj/digital-map-information-user-guide.pdf

(See USGS Digital Data Series DDS-69-E) A geographic information system focusing on the Jurassic-Cretaceous Cotton Valley Group was developed for the U.S. Geological Survey's (USGS) 2002 assessment of undiscovered, technically recoverable oil and natural gas resources of the Gulf Coast Region. The USGS Energy Resources Science Center has developed map and metadata services to deliver the 2002 assessment results GIS data and services online. The Gulf Coast assessment is based on geologic elements of a total petroleum system (TPS) as described in Dyman and Condon (2005). The estimates of undiscovered oil and gas resources are within assessment units (AUs). The hydrocarbon assessment units include the assessment results as attributes within the AU polygon feature class (in geodatabase and shapefile format). Quarter-mile cells of the land surface that include single or multiple wells were created by the USGS to illustrate the degree of exploration and the type and distribution of production for each assessment unit. Other data that are available in the map documents and services include the TPS and USGS province boundaries. To easily distribute the Gulf Coast maps and GIS data, a web mapping application has been developed by the USGS, and customized ArcMap (by ESRI) projects are available for download at the Energy Resources Science Center Gulf Coast website. ArcGIS Publisher (by ESRI) was used to create a published map file (pmf) from each ArcMap document (.mxd). The basemap services being used in the GC map applications are from ArcGIS Online Services (by ESRI), and include the following layers: -- Satellite imagery -- Shaded relief -- Transportation -- States -- Counties -- Cities -- National Forests With the ESRI_StreetMap_World_2D service, detailed data, such as railroads and airports, appear as the user zooms in at larger scales. This map service shows the structural configuration on the top of the Cotton Valley Group in feet below sea level. The map was produced by calculating the difference between a datum at the land surface (either the kelly bushing elevation or the ground surface elevation) and the reported depth of the Cotton Valley Group. This map service also shows the thickness of the interval from the top of the Cotton Valley Group to the top of the Smackover Formation.

Geospatial data about Grayson County, Texas Oil and Gas Pipelines. Export to CAD, GIS, PDF, CSV and access via API.

(See USGS Digital Data Series DDS-69-H) A geographic information system focusing on the Upper Cretaceous Taylor and Navarro Groups was developed for the U.S. Geological Survey's (USGS) 2003 assessment of undiscovered, technically recoverable oil and natural gas resources of the Gulf Coast Region. The USGS Energy Resources Science Center has developed map and metadata services to deliver the 2003 assessment results GIS data and services online. The Gulf Coast assessment is based on geologic elements of a total petroleum system (TPS) as described in Condon and Dyman (2005). The estimates of undiscovered oil and gas resources are within assessment units (AUs). The hydrocarbon assessment units include the assessment results as attributes within the AU polygon feature class (in geodatabase and shapefile format). Quarter-mile cells of the land surface that include single or multiple wells were created by the USGS to illustrate the degree of exploration and the type and distribution of production for each assessment unit. Other data that are available in the map documents and services include the TPS and USGS province boundaries. To easily distribute the Gulf Coast maps and GIS data, a web mapping application has been developed by the USGS, and customized ArcMap (by ESRI) projects are available for download at the Energy Resources Science Center Gulf Coast website. ArcGIS Publisher (by ESRI) was used to create a published map file (pmf) from each ArcMap document (.mxd). The basemap services being used in the GC map applications are from ArcGIS Online Services (by ESRI), and include the following layers: -- Satellite imagery -- Shaded relief -- Transportation -- States -- Counties -- Cities -- National Forests With the ESRI_StreetMap_World_2D service, detailed data, such as railroads and airports, appear as the user zooms in at larger scales.

A 24"x28" PDF map of Oil and Gas wells and pipelines in Denton County, provided by the Railroad Commission of Texas.

The idea of using oil and gas wells for geothermal energy production was brought to the forefront in 2005 and 2006 (McKenna et al., 2005; SMU Geothermal Energy Utilization Conference, 2006; Erdlac et al., 2006). This concept has prompted a review of existing research in Texas from the 1970s to 1990s on geopressure and a new resource assessment based on oil and gas well data. Through the combination of new and previous data sets, a series of temperature maps at depths ranging from 7000 to 14,000 feet for eastern Texas have been created. South Texas has the highest temperatures (420F). The Gulf Coast geopressure resource is best defined and closest to electric markets, making this an initial first choice for development.

Cell maps for each Miocene and Plio-Pleistocene oil and gas assessment unit were created by the USGS to illustrate the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data are current as of 2005.

Additionally, cell maps were made that show the distribution of producing and non-producing Miocene wells throughout the Gulf Coast region, regardless of assessment unit. These maps consist of wells for which only an 'undivided Miocene' age is assigned (au47014ucg), and a summary cell map that represents all Miocene wells (au47014cg). These maps are intended to illustrate the total amount of drilling in Miocene rocks in the Gulf Coast region, whether or not we can assign an age of Lower, Middle, or Upper Miocene to the tested or producing interval.

This isopach map shows the thickness of the interval from the top of the Travis Peak or Hosston Formations to the top of the Cotton Valley Group. The map was produced by first subtracting the values of the top of the Travis Peak or Hosston from those of the top of the Cotton Valley Group. This resulted in a data set of 8,585 values for which locations were available. After deleting the wells with obvious data problems, a total of 8414 wells were used to generate the map. The data are provided as both lines and polygons, and the proprietary wells that penetrate this interval are graphically displayed as quarter-mile cells. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data are current as of April 2001.

(See USGS Digital Data Series DDS-69-E) A geographic information system focusing on the Cretaceous Travis Peak and Hosston Formations was developed for the U.S. Geological Survey's (USGS) 2002 assessment of undiscovered, technically recoverable oil and natural gas resources of the Gulf Coast Region. The USGS Energy Resources Science Center has developed map and metadata services to deliver the 2002 assessment results GIS data and services online. The Gulf Coast assessment is based on geologic elements of a total petroleum system (TPS) as described in Dyman and Condon (2005). The estimates of undiscovered oil and gas resources are within assessment units (AUs). The hydrocarbon assessment units include the assessment results as attributes within the AU polygon feature class (in geodatabase and shapefile format). Quarter-mile cells of the land surface that include single or multiple wells were created by the USGS to illustrate the degree of exploration and the type and distribution of production for each assessment unit. Other data that are available in the map documents and services include the TPS and USGS province boundaries. To easily distribute the Gulf Coast maps and GIS data, a web mapping application has been developed by the USGS, and customized ArcMap (by ESRI) projects are available for download at the Energy Resources Science Center Gulf Coast website. ArcGIS Publisher (by ESRI) was used to create a published map file (pmf) from each ArcMap document (.mxd). The basemap services being used in the GC map applications are from ArcGIS Online Services (by ESRI), and include the following layers: -- Satellite imagery -- Shaded relief -- Transportation -- States -- Counties -- Cities -- National Forests With the ESRI_StreetMap_World_2D service, detailed data, such as railroads and airports, appear as the user zooms in at larger scales. This map service shows the structural configuration of the top of the Travis Peak or Hosston Formations in feet below sea level. The map was produced by calculating the difference between a datum at the land surface (either the Kelly bushing elevation or the ground surface elevation) and the reported depth of the Travis Peak or Hosston. This map service also shows the thickness of the interval from the top of the Travis Peak or Hosston Formations to the top of the Cotton Valley Group.

This map shows the structural configuration of the top of the Travis Peak or Hosston Formations in feet below sea level. The map was produced by calculating the difference between a datum at the land surface (either the Kelly bushing elevation or the ground surface elevation) and the reported depth of the Travis Peak or Hosston. This resulted in 18,941 wells for which locations were available. After deleting the wells with obvious data problems, a total of 18,933 wells were used for the map. The data are provided as both lines and polygons, and the proprietary wells that penetrate the top of the Travis Peak or Hosston Formations are graphically displayed as quarter-mile cells. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data are current as of April 2001.

Oil and gas pipeline data for Denton County, provided by the Railroad Commission of Texas.

This feature dataset contains oil and gas information for the BRADD region.Thumbnail Image: By Eric Kounce TexasRaiser - Located south of Midland, Texas, Public Domain, https://commons.wikimedia.org/w/index.php?curid=4639595

Geospatial data about Texas Pipelines. Export to CAD, GIS, PDF, CSV and access via API.

This map shows the structural configuration on the top of the Cotton Valley Group in feet below sea level. The map was produced by calculating the difference between a datum at the land surface (either the kelly bushing elevation or the ground surface elevation) and the reported depth of the Cotton Valley Group. This resulted in 10,687 wells for which locations were available. After deleting the wells with obvious data problems, a total of 10,504 wells were used to generate the map. The data are provided as both lines and polygons, and the proprietary wells that penetrate the top of the Cotton Valley Group are graphically displayed as quarter-mile cells. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Wel ...

This isopach map shows the thickness of the interval from the top of the Cotton Valley Group to the top of the Smackover Formation. It was necessary to contour this expanded interval, instead of just the upper part of the Cotton Valley Group, because of the limited availability of data. Ideally, just the part of the Cotton Valley Group above the Bossier Shale would have been contoured, but there are a limited number of Bossier picks in the database, and many of the Bossier picks are not at a consistent stratigraphic break (J.L. Ridgley, oral commun., 2002). Data for units below the Bossier, such as the Haynesville or Buckner Formations, are also limited on a regional basis. The Smackover Formation is the first unit below the top of the Cotton Valley that has abundant data available on a regional level. The data are provided as both lines and polygons, and the proprietary wells that penetrate this interval are graphically displayed as quarter-mile cells. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data are current as of April 2001.

description: Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data are current as of April 2001.; abstract: Cell maps for each oil and gas assessment unit were created by the USGS as a method for illustrating the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data are current as of April 2001.

Cell maps for each oil and gas assessment unit were created by the USGS to illustrate the degree of exploration, type of production, and distribution of production in an assessment unit or province. Each cell represents a quarter-mile square of the land surface, and the cells are coded to represent whether the wells included within the cell are predominantly oil-producing, gas-producing, both oil and gas-producing, dry, or the type of production of the wells located within the cell is unknown. The well information was initially retrieved from the IHS Energy Group, PI/Dwights PLUS Well Data on CD-ROM, which is a proprietary, commercial database containing information for most oil and gas wells in the U.S. Cells were developed as a graphic solution to overcome the problem of displaying proprietary PI/Dwights PLUS Well Data. No proprietary data are displayed or included in the cell maps. The data from PI/Dwights PLUS Well Data are current as of 2003.

This layer is a component of Permits.