Zoning is a regulatory means to govern activity applicable to particular lots such as residential, commercial, industrial, and agricultural.

This mapping tool provides a representation of the general watershed boundaries for stream systems declared fully appropriated by the State Water Board. The boundaries were created by Division of Water Rights staff by delineating FASS critical reaches and consolidating HUC 12 sub-watersheds to form FASS Watershed boundaries. As such, the boundaries are in most cases conservative with respect to the associated stream system. However, users should check neighboring FASS Watersheds to ensure the stream system of interest is not restricted by other FASS listings. For more information regarding the Declaration of Fully Appropriated Stream Systems, visit the Division of Water Rights’ Fully Appropriated Streams webpage. How to Use the Interactive Mapping Tool: If it is your first time viewing the map, you will need to click the “OK” box on the splash screen and agree to the disclaimer before continuing. Navigate to your point of interest by either using the search bar or by zooming in on the map. You may enter a stream name, street address, or watershed ID in the search bar. Click on the map to identify the location of interest and one or more pop-up boxes may appear with information about the fully appropriated stream systems within the general watershed boundaries of the identified location. The information provided in the pop-up box may include: (a) stream name, (b) tributary, (c) season declared fully appropriated, (d) Board Decisions/Water Right Orders, and/or (e) court references/adjudications. You may toggle the FAS Streams reference layer on and off to find representative critical reaches associated with the FASS Watershed layer. Please note that this layer is for general reference purposes only and ultimately the critical reach listed in Appendix A of Water Rights Order 98-08 and Appendix A together with any associated footnotes controls. Note: A separate FAS Watershed boundary layer was created for the Bay-Delta Watershed. The Bay-Delta Watershed layer should be toggled on to check if the area of interest is fully appropriated under State Water Board Decision 1594.

description: This tool provides a no-cost downloadable software tool that allows users to interact with professional quality GIS maps. Users access pre-compiled projects through a free software product called ArcReader, and are able to open and explore HUD-specific project data as well as design and print custom maps. No special software/map skills beyond basic computer skills are required, meaning users can quickly get started working with maps of their communities.; abstract: This tool provides a no-cost downloadable software tool that allows users to interact with professional quality GIS maps. Users access pre-compiled projects through a free software product called ArcReader, and are able to open and explore HUD-specific project data as well as design and print custom maps. No special software/map skills beyond basic computer skills are required, meaning users can quickly get started working with maps of their communities.

Water system features such as junctions, caps, tees, reducers, pressure backflow, crosses or blow-offs between pipe segments along water network

The ArcGIS Pro Permitting and Environmental Information Tool (APPEIT) Project Package includes all of the layers that are in the NTIA Permitting and Environmental Information Application as well as the APPEIT Tool which will allow users to input a project area and determine what layers from the application overlap with it. An overview of the project package and the APPEIT tool is provided below.

User instructions on how to use the tool are available here. A video explaining how to use the Project Package is also available here.

Project Package Overview

This map package includes all of the layers from the NTIA Permitting and Environmental Information Application. The layers included are all feature services from various Federal and State agencies. The map package was created with ArcGIS Pro 3.4.0. The map package was created to allow users easy access to all feature services including symbology. The map package will allow users to avoid downloading datasets individually and easily incorporate into their own GIS system. The map package includes three maps.

1. Permitting and Environmental Information Application Layers for GIS Analysis - This map includes all of the map tabs shown in the application, except State Data which is provided in another tab. This map includes feature services that can be used for analysis with other project layers such as a route or project area.

2. Permitting and Environmental Information Application Layers – For Reference Only - This map includes layers that cannot be used for analysis since they are either imagery or tile layers.

3. State Data - Reference Only - This map includes all relevant state data that is shown in the application.

The NTIA Permitting and Environmental Information Application was created to help with your permitting planning and environmental review preparation efforts by providing access to multiple maps from publicly available sources, including federal review, permitting, and resource agencies. The application should be used for informational purposes only and is intended solely to assist users with preliminary identification of areas that may require permits or planning to avoid potentially significant impacts to environmental resources subject to the National Environmental Policy Act (NEPA) and other statutory requirements. Multiple maps are provided in the application which are created from public sources. This application does not have an exhaustive list of everything you need for permitting or environmental review for a project but is an initial starting point to see what might be required.

APPEIT Tool OverviewThe Department of Commerce’s National Telecommunications and Information Administration (NTIA) is providing the ArcGIS Pro Permitting and Environmental Information Tool (APPEIT) to help federal broadband grant recipients and subgrantees identify permits and environmental factors as they plan routes for their broadband deployments. Identifying permit requirements early, initiating pre-application coordination with permitting agencies, and avoiding environmental impacts help drive successful infrastructure projects. NTIA’s public release of the APPEIT tool supports government-wide efforts to improve permitting and explore how online and digital technologies can promote efficient environmental reviews.

This Esri ArcGIS Pro tool is included in the map package and was created to support permitting, planning, and environmental review preparation efforts by providing access to data layers from publicly available sources, including federal review, permitting, and resource agencies. An SOP on how to use the tool is available here. For the full list of APPEIT layers, see Appendix Table 1 in the SOP. The tool is comprised of an ArcGIS Pro Project containing a custom ArcGIS Toolbox tool, linked web map shared by the NTIA’s National Broadband Map (NBAM), a report template, and a Tasks item to guide users through using the tool. This ArcGIS Pro project and its contents (maps and data) are consolidated into this (.ppkx) project file.

To use APPEIT, users will input a project area boundary or project route line in a shapefile or feature class format. The tool will return as a CSV and PDF report that lists any federal layers from the ArcGIS Pro Permitting and Environmental Information Web Map that intersect the project. Users may only input a single project area or line at a time; multiple projects or project segments will need to be screened separately. For project route lines, users are required to specify a buffer distance. The buffer distance that is used for broadband projects should be determined by the area of anticipated impact and should generally not exceed 500 feet. For example, the State of Maryland recommends a 100-foot buffer for broadband permitting. The tool restricts buffers to two miles to ensure relevant results.

Disclaimer

This document is intended solely to assist federal broadband grant recipients and subgrantees in better understanding Infrastructure Investment and Jobs Act (IIJA) broadband grant programs and the requirements set forth in the Notice of Funding Opportunity (NOFO) for this program. This document does not and is not intended to supersede, modify, or otherwise alter applicable statutory or regulatory requirements, the terms and conditions of the award, or the specific application requirements set forth in the NOFO. In all cases, statutory and regulatory mandates, the terms and conditions of the award, the requirements set forth in the NOFO, and follow-on policies and guidance, shall prevail over any inconsistencies contained in this document.

NTIA’s ArcGIS Pro Permitting and Environmental Information Tool (APPEIT) should be used for informational purposes only and is intended solely to assist users with preliminary identification of broadband deployments that may require permits or planning to avoid potentially significant impacts to environmental resources subject to the National Environmental Policy Act (NEPA) and other statutory requirements.

The tool is not an exhaustive or complete resource and does not and is not intended to substitute for, supersede, modify, or otherwise alter any applicable statutory or regulatory requirements, or the specific application requirements set forth in any NTIA NOFO, Terms and Conditions, or Special Award Condition. In all cases, statutory and regulatory mandates, and the requirements set forth in NTIA grant documents, shall prevail over any inconsistencies contained in these templates.

The tool relies on publicly available data available on the websites of other federal, state, local, and Tribal agencies, and in some instances, private organizations and research institutions. Layers identified with a double asterisk include information relevant to determining if an “extraordinary circumstance” may warrant more detailed environmental review when a categorical exclusion may otherwise apply. While NTIA continues to make amendments to its websites to comply with Section 508, NTIA cannot ensure Section 508 compliance of federal and non-federal websites or resources users may access from links on NTIA websites.

All data is presented “as is,” “as available” for informational purposes. NTIA does not warrant the accuracy, adequacy, or completeness of this information and expressly disclaims liability for any errors or omissions.

Please e-mail IFAanalytics@ntia.gov with any questions.

The Travel Time Tool was created by the MN DNR to use GIS analysis for calculation of hydraulic travel time from gridded surfaces and develop a downstream travel time raster for each cell in a watershed. This hydraulic travel time process, known as Time of Concentration, is a concept from the science of hydrology that measures watershed response to a precipitation event. The analysis uses watershed characteristics such as land-use, geology, channel shape, surface roughness, and topography to measure time of travel for water. Described as Travel Time, it calculates the elapsed time for a simulated drop of water to migrate from its source along a hydraulic path across different surfaces of the replicated watershed landscape, ultimately reaching the watershed outlet. The Travel Time Tool creates a raster whereas each cell is a measure of the length of time (in seconds) that it takes water to flow across it, and then accumulates the time (in hours) from the cell to the outlet of the watershed.

The Travel Time Tool creates an impedance raster from Manning's Equation that determines the velocity of water flowing across the cell as a measure of time (in feet per second). The Flow Length Tool uses the travel time Grid for the impedance factor and determines the downstream flow time from each cell to the outlet of the watershed.

The toolbox works with ArcMap 10.6.1 and newer and ArcGIS Pro.

For step-by-step instructions on how to use the tool, please view MN DNR Travel Time Guidance.pdf

This data provides the locations of civic, crown, emergency and private facilities in the Township of Langley. Facilities are used corporately as both primary and background data. Civic and crown facilities are frequently updated but private facilities may not be accurate. Facility data is not intended as a true legal representation, it has been compiled from a variety of sources over many decades, using differing standards for measurement, input and documentation.

This data release includes GIS datasets supporting the Colorado Legacy Mine Lands Watershed Delineation and Scoring tool (WaDeS), a web mapping application available at https://geonarrative.usgs.gov/colmlwades/. Water chemistry data were compiled from the U.S. Geological Survey (USGS) National Water Information System (NWIS), U.S. Environmental Protection Agency (EPA) STORET database, and the USGS Central Colorado Assessment Project (CCAP) (Church and others, 2009). The CCAP study area was used for this application. Samples were summarized at each monitoring station and hardness-dependent chronic and acute toxicity thresholds for aquatic life protections under Colorado Regulation No. 31 (CDPHE, 5 CCR 1002-31) for cadmium, copper, lead, and/or zinc were calculated. Samples were scored according to how metal concentrations compared with acute and chronic toxicity thresholds. The results were used in combination with remote sensing derived hydrothermal alteration (Rockwell and Bonham, 2017) and mine-related features (Horton and San Juan, 2016) to identify potential mine remediation sites within the headwaters of the central Colorado mineral belt. Headwaters were defined by watersheds delineated from a 10-meter digital elevation dataset (DEM), ranging in 5-35 square kilometers in size. Python and R scripts used to derive these products are included with this data release as documentation of the processing steps and to enable users to adapt the methods for their own applications. References Church, S.E., San Juan, C.A., Fey, D.L., Schmidt, T.S., Klein, T.L. DeWitt, E.H., Wanty, R.B., Verplanck, P.L., Mitchell, K.A., Adams, M.G., Choate, L.M., Todorov, T.I., Rockwell, B.W., McEachron, Luke, and Anthony, M.W., 2012, Geospatial database for regional environmental assessment of central Colorado: U.S. Geological Survey Data Series 614, 76 p., https://doi.org/10.3133/ds614. Colorado Department of Public Health and Environment (CDPHE), Water Quality Control Commission 5 CCR 1002-31. Regulation No. 31 The Basic Standards and Methodologies for Surface Water. Effective 12/31/2021, accessed on July 28, 2023 at https://cdphe.colorado.gov/water-quality-control-commission-regulations. Horton, J.D., and San Juan, C.A., 2022, Prospect- and mine-related features from U.S. Geological Survey 7.5- and 15-minute topographic quadrangle maps of the United States (ver. 8.0, September 2022): U.S. Geological Survey data release, https://doi.org/10.5066/F78W3CHG. Rockwell, B.W. and Bonham, L.C., 2017, Digital maps of hydrothermal alteration type, key mineral groups, and green vegetation of the western United States derived from automated analysis of ASTER satellite data: U.S. Geological Survey data release, https://doi.org/10.5066/F7CR5RK7.

Over 40,000 road crossings in Maine are maintained by Maine Department of Transportation (MaineDOT) managers, emergency managers, natural resource planners, and municipalities. Resource managers need a way to quickly and comprehensively assess, during the planning stages of potential transportation-related projects, how ecological, hydrologic, and structural characteristics of bridges and culverts and their watersheds could adversely affect project schedules and budgets. Factors that are critical to evaluate and incorporate into overall assessments of project risk include basin, land-use, and climatic characteristics; vulnerability to specific events, such as floods; and complicating factors in the watershed, such as endangered species, evacuation routes, and historical sites. A Python script tool has been built for ArcGIS Pro as an automated screening tool that draws on existing geographic information system (GIS) data layers to identify potential risk factors and quantify risk scores for bridges and culverts. This tool can help resource managers quickly evaluate projects, during early planning, in terms of variables that may adversely affect schedules or budgets.

https://github.com/gruizmer/COW2NUTRIENT/tree/master/ToolPaper_DataFiles * These folders supply supporting datasets for the manuscript "COW2NUTRIENT: An environmental GIS-based decision support tool for the assessment of nutrient recovery systems in livestock facilities." * The datasets are recorder as comma-separated values (.csv) and Microsoft Excel® (.xlsx) files. Column data entries have names and units. Some data are about animal facility population and location, amount of nutrient-rich waste generated (kg/yr), amount of nutrient recovered (kg P/yr), installing, capital, and maintenance costs (USD), technologies and their ranking and frequency of being selected for each combination of normalization-aggregation methods, average chlorophyll-a concentration in water in the watershed (ug/L), and average phosphorus concentration in water in the watershed (ug/L). * The folder “Manuscript” has subfolders with datasets for creating manuscript Figures 4, 8, 9, and 10 as well as datasets for Tables 9 and 10. * The folder “Supplementary Material” holds subfolders with datasets for creating Supplementary Material Figures 1-5, 8, 9, 11, and 12. This dataset is associated with the following publication: Martin-Hernandez, E., M. Martin, and G.J. Ruiz-Mercado. A geospatial environmental and techno-economic framework for sustainable phosphorus management at livestock facilities. Resources, Conservation and Recycling. Elsevier Science BV, Amsterdam, NETHERLANDS, 175: 105843, (2021).

1) Use the search tool to find where you go to school or work2) Measure the distance you travel to school or work

To identify the area of each community as defined by the Community Plans.DescriptionCommunity boundary information is maintained by Long Range Planning and all changes to the boundaries must be approved my council through Official Community Plan applications. Community plan information is maintained by Long Range Planning. This is the primary copy of the community boundary information from community plan information (Landuse, Parks, Environment, Utility Connections) used to ensure refer to these boundaries.

Points representing locations to chambers and other structures along the sanitary network.Included are: blowdown, air valve, valve chamber, sluice gate, instrumentation points and Odour control structure

2025 Property Assessments for the Township of Langley. Data originally from BC Assessment. The data is intended for use as a general reference and is not intended or suitable for site-specific or financial decisions. Prior to making any property purchases or other investments based in full or in part upon the information provided, it is specifically advised that you independently verify the information contained in this data.

Collection of points identified by a grave marker number coded in a way that they can be located at a specific graveyard. Records from about 1880's to 2021. This is part of an ongoing project to consolidate cemetery deceased data.The data is intended for use as a general reference only. Please verify the information contained in this data.

Agricultural land reserve boundaries are used to identify lands areas that are within the Agricultural Land Reserve. The ALR is a Provincial designation monitored by the Agricultural Land Commission (ALC).

The boundary extents of Langley Township’s legal jurisdiction.

Development activity information provides the public with updates to the development applications and projects. The majority of development activities are linked with a specific property and can be mapped accordingly. However, some development activities processes do not allow for specific property linkages and therefore cannot be mapped and shown on the online mapping application. All development activities that are not mapped are assigned approximate addresses, community and neighbourhoods where it is feasible to assign these values. If additional information is required, please contact Township Staff.

Ortho Photo Index with Download Links, 1994-2019

Point features representing water valves along water network include such types as gate, butterfly, air and check valves. Valves are used to regulate the flow of water or to release air from pipes in the water network.