In 2023, the metropolitan area of New York-Newark-Jersey City had the biggest population in the United States. Based on annual estimates from the census, the metropolitan area had around 19.5 million inhabitants, which was a slight decrease from the previous year. The Los Angeles and Chicago metro areas rounded out the top three. What is a metropolitan statistical area? In general, a metropolitan statistical area (MSA) is a core urbanized area with a population of at least 50,000 inhabitants – the smallest MSA is Carson City, with an estimated population of nearly 56,000. The urban area is made bigger by adjacent communities that are socially and economically linked to the center. MSAs are particularly helpful in tracking demographic change over time in large communities and allow officials to see where the largest pockets of inhabitants are in the country. How many MSAs are in the United States? There were 421 metropolitan statistical areas across the U.S. as of July 2021. The largest city in each MSA is designated the principal city and will be the first name in the title. An additional two cities can be added to the title, and these will be listed in population order based on the most recent census. So, in the example of New York-Newark-Jersey City, New York has the highest population, while Jersey City has the lowest. The U.S. Census Bureau conducts an official population count every ten years, and the new count is expected to be announced by the end of 2030.

This statistic provides projected figures for the Gross Metropolitan Product (GMP) of the United States in 2021, by metropolitan area. Only the 100 leading metropolitan areas are shown here. In 2022, the GMP of the New York-Newark-Jersey City metro area is projected to be around of about **** trillion U.S. dollars. Los Angeles metropolitan areaA metropolitan area in the U.S. is characterized by a relatively high population density and close economic ties through the area, albeit, without the legal incorporation that is found within cities. The Gross Metropolitan Product is measured by the Bureau of Economic Analysis under the U.S. Department of Commerce and includes only metropolitan areas. The GMP of the Los Angeles-Long Beach-Anaheim metropolitan area located in California is projected to be among the highest in the United States in 2021, amounting to *** trillion U.S. dollars. The Houston-The Woodlands-Sugar Land, Texas metro area is estimated to be approximately *** billion U.S. dollars in the same year. The Los Angeles metro area had one of the largest populations in the country, totaling ****** million people in 2021. The Greater Los Angeles region has one of the largest economies in the world and is the U.S. headquarters of many international car manufacturers including Honda, Mazda, and Hyundai. Its entertainment industry has generated plenty of tourism and includes world famous beaches, shopping, motion picture studios, and amusement parks. The Hollywood district is known as the “movie capital of the U.S.” and has its historical roots in the country’s film industry. Its port, the Port of Los Angeles and the Port of Long Beach are aggregately one of the world’s busiest ports. The Port of Los Angelesgenerated some ****** million U.S. dollars in revenue in 2019.

In 2023, San Jose-Sunnyvale-Santa Clara Metro area in California was ranked first with median household income of 153,202 U.S. dollars. The Washington-Arlington-Alexandria metro area had a median household income of 121,469 U.S. dollars.

The New York-Newark-Jersey City metro area had the highest real GDP in 2023, totaling around 1.91 billion U.S. dollars. The Los Angeles-Long Beach-Anaheim metro area also had a high real GDP of around 1.08 billion dollars. This statistic only contains the top 100 metro areas by real GDP.

Among the 81 largest metropolitan areas (by population) in the United States, Knoxville, Tennessee was ranked first with **** percent of residents reporting as white, non-Hispanic in 2023.

This is long-form yearly data from 2005-2019 for each of the 100 largest metro areas in the United States in 2019. For each metro area it includes: population, per capita income, metro area export value, USDX, number of foreign Consulate Generals, number of active Sister City International relationships, and the metro area memberships to ten leading international city networks/organizations.

United States Avg Sale to List: sa: Townhouse: Hot Springs, AR data was reported at 97.001 % in May 2020. This records a decrease from the previous number of 97.440 % for Apr 2020. United States Avg Sale to List: sa: Townhouse: Hot Springs, AR data is updated monthly, averaging 94.158 % from Feb 2012 (Median) to May 2020, with 100 observations. The data reached an all-time high of 97.832 % in Feb 2012 and a record low of 71.557 % in Sep 2014. United States Avg Sale to List: sa: Townhouse: Hot Springs, AR data remains active status in CEIC and is reported by Redfin. The data is categorized under Global Database’s United States – Table US.EB051: Average Sales to List: by Metropolitan Areas: Seasonally Adjusted.

The statistic shows the number of high net worth individuals in the biggest metropolitan areas of the United States in 2014. In 2014, the metropolitan area of New York had about 963 thousand high net worth individuals - individuals who hold at least 1 million U.S. dollars in financial assets - thus leading the ranking.

The Bureau of the Census has released Census 2000 Summary File 1 (SF1) 100-Percent data. The file includes the following population items: sex, age, race, Hispanic or Latino origin, household relationship, and household and family characteristics. Housing items include occupancy status and tenure (whether the unit is owner or renter occupied). SF1 does not include information on incomes, poverty status, overcrowded housing or age of housing. These topics will be covered in Summary File 3. Data are available for states, counties, county subdivisions, places, census tracts, block groups, and, where applicable, American Indian and Alaskan Native Areas and Hawaiian Home Lands. The SF1 data are available on the Bureau's web site and may be retrieved from American FactFinder as tables, lists, or maps. Users may also download a set of compressed ASCII files for each state via the Bureau's FTP server. There are over 8000 data items available for each geographic area. The full listing of these data items is available here as a downloadable compressed data base file named TABLES.ZIP. The uncompressed is in FoxPro data base file (dbf) format and may be imported to ACCESS, EXCEL, and other software formats. While all of this information is useful, the Office of Community Planning and Development has downloaded selected information for all states and areas and is making this information available on the CPD web pages. The tables and data items selected are those items used in the CDBG and HOME allocation formulas plus topics most pertinent to the Comprehensive Housing Affordability Strategy (CHAS), the Consolidated Plan, and similar overall economic and community development plans. The information is contained in five compressed (zipped) dbf tables for each state. When uncompressed the tables are ready for use with FoxPro and they can be imported into ACCESS, EXCEL, and other spreadsheet, GIS and database software. The data are at the block group summary level. The first two characters of the file name are the state abbreviation. The next two letters are BG for block group. Each record is labeled with the code and name of the city and county in which it is located so that the data can be summarized to higher-level geography. The last part of the file name describes the contents . The GEO file contains standard Census Bureau geographic identifiers for each block group, such as the metropolitan area code and congressional district code. The only data included in this table is total population and total housing units. POP1 and POP2 contain selected population variables and selected housing items are in the HU file. The MA05 table data is only for use by State CDBG grantees for the reporting of the racial composition of beneficiaries of Area Benefit activities. The complete package for a state consists of the dictionary file named TABLES, and the five data files for the state. The logical record number (LOGRECNO) links the records across tables.

United States Months of Supply: Townhouse: Hot Springs, AR data was reported at 2.900 Month in Jul 2020. This records an increase from the previous number of 1.300 Month for Jun 2020. United States Months of Supply: Townhouse: Hot Springs, AR data is updated monthly, averaging 8.000 Month from Feb 2012 (Median) to Jul 2020, with 100 observations. The data reached an all-time high of 51.000 Month in May 2013 and a record low of 1.300 Month in Jun 2020. United States Months of Supply: Townhouse: Hot Springs, AR data remains active status in CEIC and is reported by Redfin. The data is categorized under Global Database’s United States – Table US.EB029: Months of Supply: by Metropolitan Areas.

Chart and table of population level and growth rate for the Los Angeles metro area from 1950 to 2025.

Large multinational firms (LMF) play a crucial role in the dynamics of knowledge production worldwide. The study conducted by Université Eiffel, using inventive activities as a central marker, highlights in particular four major results: (i) Large groups represent 80% of worldwide international inventive activities and, contrary to many expectations, this role has increased over the last decade. (ii) Though LMF are present in 60% of inventive metropolitan areas, the top 100 metropolitan areas worldwide concentrate 80% of LMF international patents. (iii) Large metropolitan areas gather 90% of international patents in Asia, 70% in the US, but only 37% in Europe. Europe has thus a very different structure where inventive activities are more distributed with a central role of medium-size metropolitan areas. (iv) ‘National’ LMF play a majority role in the overall production of metropolitan areas: over 90% in Asia, and 75% in the US. In Europe, this share is only 57%. This highlights the role of LMF from other European countries (23%) and from outside of Europe (20%). These four results question research and innovation policies and call for an open debate about their policy-mix and their role in distributive and inclusion objectives. The study has been conducted, using in an integrated way the three major resources developed within RISIS: CIB dataset on large firms, RISIS patent database on patents, and CORTEXT geolocation on metropolitan areas.

This layer was developed by the Research & Analytics Division of the Atlanta Regional Commission to represent the United States Census Bureau's 2000 Decennial Census at the block group geography.Attributes:FIPSSTCO = The Federal Information Processing Series (FIPS) state and county codes. FIPS codes were formerly known as Federal Information Processing Standards codes, until the National Institute of Standards and Technology (NIST) announced its decision in 2005 to remove geographic entity codes from its oversight. The Census Bureau continues to maintain and issue codes for geographic entities covered under FIPS oversight, albeit with a revised meaning for the FIPS acronym. Geographic entities covered under FIPS include states, counties, congressional districts, core based statistical areas, places, county subdivisions, subminor civil divisions, consolidated cities, and all types of American Indian, Alaska Native, and Native Hawaiian areas. FIPS codes are assigned alphabetically according to the name of the geographic entity and may change to maintain alphabetic sort when new entities are created or names change. FIPS codes for specific geographic entity types are usually unique within the next highest level of geographic entity with which a nesting relationship exists. For example, FIPS state, congressional district, and core based statistical area codes are unique within nation; FIPS county, place, county subdivision, and subminor civil division codes are unique within state. The codes for American Indian, Alaska Native, and Native Hawaiian areas also are unique within state; those areas in multiple states will have different codes for each state.TRACT = Census Tract Codes and Numbers. Census tracts are identified by an up to four-digit integer number and may have an optional two-digit suffix; for example 1457.02 or 23. The census tract codes consist of six digits with an implied decimal between the fourth and fifth digit corresponding to the basic census tract number but with leading zeroes and trailing zeroes for census tracts without a suffix. The tract number examples above would have codes of 145702 and 002300, respectively.GROUP_ = Block Group Codes. Block Groups have a valid code range of 0 through 9. Block Groups beginning with a zero only contain water area and are generally in coastal and Great Lakes water and territorial seas, but also in larger inland water bodies. STFID = A concatenation of FIPSSTCO, TRACT, and GROUP_, which creates the entire FIPS code for this geography.POP100 = The population of the Block Group at the time of the census.HU100 = The number of housing units in the Block group at the time of the census.WFD = Workforce Development Area (WFD) is a seven-county area created by agreement of county chief-elected officials, administered by the Atlanta Regional Commission and funded for training and employment activities under the federal Workforce Investment Act (WIA). For more information on ARC’s Workforce Development programs and services please consult www.atlantaregional.com/workforce/workforce.html.RDC_AAA = ARC Area Agency on Aging is a 10-county area funded by the Department of Human Resources and designated by the Older Americans Act to plan for the needs of the rapidly expanding group of older citizens in the Atlanta region. It is part of a statewide network of 12 AAAs and a national network of more than 670 AAAs. For more information on aging services please consult www.agewiseconnection.com.MNGWPD = The Metro North Georgia Water Planning District provides water resource plans, policies and coordination for metropolitan Atlanta. The District has developed regional plans for stormwater management, wastewater treatment and water supply and water conservation. The 15-county Water Planning District includes the ten counties in the ARC plus five additional counties (Bartow, Coweta, Forsyth, Hall, & Paulding). For more information please consult www.northgeorgiawater.org. MPO = The Metropolitan Planning Organization (MPO) is a 19-county area federally-designated for regional transportation planning to meet air quality standards and for programming projects to implement the adopted Regional Transportation Plan (RTP). The MPO planning area boundary includes the 10-county state-designated Regional Commission and nine additional counties (all of Coweta, Forsyth, & Paulding and parts of Barrow, Dawson, Newton, Pike, Spalding and Walton). This boundary takes into consideration both the current urbanized area as well as areas forecast to become urbanized in the next 20 years.MSA = the 29-County “Atlanta-Sandy Springs-Roswell, GA” Metropolitan Statistical Area (MSA) and the 39-county “Atlanta--Athens-Clarke County--Sandy Springs, GA” Combined Statistical Area (CSA), which includes the 29 counties of the Atlanta MSA along with the Athens-Clarke County and Gainesville MSAs and the micropolitan statistical areas of Calhoun, Cedartown, Jefferson, LaGrange and Thomaston, GA. The U.S. Office of Management and Budget (OMB) defines CSAs, MSAs and the smaller micropolitan statistical areas nationwide according to published standards applied to U.S. Census Bureau data. These various statistical areas describe substantial core areas of population together with adjacent communities having a high degree of economic and social integration, often illustrated in high rates of commuting from the adjacent areas to job locations in the core. For more information, please consult http://www.census.gov/population/metro/data/metrodef.htmlF1HR_NA = The Federal 1-Hour Air Quality Non-Attainment Area is a fine particulate matter standard (PM2.5). The non-attainment area under this standard includes the 15-county eight-hour ozone nonattainment area plus Barrow, Carroll, Hall, Spalding, Walton, and small parts of Heard and Putnam counties.F8HR_NA: The Federal 8-Hour Air Quality Non-Attainment Area for the 2008 eight-hour ozone standard is 15 counties.ACRES = The number of acres contained within the Block Group.SQ_MILES = The number of square miles contained within the Block Group.Source: United States Census Bureau, Atlanta Regional CommissionDate: 2000For additional information, please visit the Atlanta Regional Commission at www.atlantaregional.com.

Not many studies have documented climate and air quality changes of settlements at early stages of development. This is because high quality climate and air quality records are deficient for the periods of the early 18th century to mid 20th century when many U.S. cities were formed and grew. Dramatic landscape change induces substantial local climate change during the incipient stage of development. Rapid growth along the urban fringe in Phoenix, coupled with a fine-grained climate monitoring system, provide a unique opportunity to study the climate impacts of urban development as it unfolds. Generally, heat islands form, particularly at night, in proportion to city population size and morphological characteristics. Drier air is produced by replacement of the countryside's moist landscapes with dry, hot urbanized surfaces. Wind is increased due to turbulence induced by the built-up urban fabric and its morphology; although, depending on spatial densities of buildings on the land, wind may also decrease. Air quality conditions are worsened due to increased city emissions and surface disturbances. Depending on the diversity of microclimates in pre-existing rural landscapes and the land-use mosaic in cities, the introduction of settlements over time and space can increase or decrease the variety of microclimates within and near urban regions. These differences in microclimatic conditions can influence variations in health, ecological, architectural, economic, energy and water resources, and quality-of-life conditions in the city. Therefore, studying microclimatic conditions which change in the urban fringe over time and space is at the core of urban ecological goals as part of LTER aims. In analyzing Phoenix and Baltimore long-term rural/urban weather and climate stations, Brazel et al. (In progress) have discovered that long-term (i.e., 100 years) temperature changes do not correlate with populations changes in a linear manner, but rather in a third-order nonlinear response fashion. This nonlinear temporal change is consistent with the theories in boundary layer climatology that describe and explain the leading edge transition and energy balance theory. This pattern of urban vs. rural temperature response has been demonstrated in relation to spatial range of city sizes (using population data) for 305 rural vs. urban climate stations in the U.S. Our recent work on the two urban LTER sites has shown that a similar climate response pattern also occurs over time for climate stations that were initially located in rural locations have been overrun bu the urban fringe and subsequent urbanization (e.g., stations in Baltimore, Mesa, Phoenix, and Tempe). Lack of substantial numbers of weather and climate stations in cities has previously precluded small-scale analyses of geographic variations of urban climate, and the links to land-use change processes. With the advent of automated weather and climate station networks, remote-sensing technology, land-use history, and the focus on urban ecology, researchers can now analyze local climate responses as a function of the details of land-use change. Therefore, the basic research question of this study is: How does urban climate change over time and space at the place of maximum disturbance on the urban fringe? Hypotheses 1. Based on the leading edge theory of boundary layer climate change, largest changes should occur during the period of peak development of the land when land is being rapidly transformed from open desert and agriculture to residential, commercial, and industrial uses. 2. One would expect to observe, on average and on a temporal basis (several years), nonlinear temperature and humidity alterations across the station network at varying levels of urban development. 3. Based on past research on urban climate, one would expect to see in areas of the urban fringe, rapid changes in temperature (increases at night particularly), humidity (decreases in areas from agriculture to urban; increases from desert to urban), and wind speed (increases due to urban heating). 4. Changes of the surface climate on the urban fringe are expected to be altered as a function of various energy, moisture, and momentum control parameters, such as albedo, surface moisture, aerodynamic surface roughness, and thermal admittance. These parameters relate directly to population and land-use change (Lougeay et al. 1996).

This map shows the percentage of people who identify as something other than non-Hispanic white throughout the US according to the most current American Community Survey. The pattern is shown by states, counties, and Census tracts. Zoom or search for anywhere in the US to see a local pattern. Click on an area to learn more. Filter to your area and save a new version of the map to use for your own mapping purposes.The Arcade expression used was: 100 - B03002_calc_pctNHWhiteE, which is simply 100 minus the percent of population who identifies as non-Hispanic white. The data is from the U.S. Census Bureau's American Community Survey (ACS). The figures in this map update automatically annually when the newest estimates are released by ACS. For more detailed metadata, visit the ArcGIS Living Atlas Layer: ACS Race and Hispanic Origin Variables - Boundaries.The data on race were derived from answers to the question on race that was asked of individuals in the United States. The Census Bureau collects racial data in accordance with guidelines provided by the U.S. Office of Management and Budget (OMB), and these data are based on self-identification. The racial categories included in the census questionnaire generally reflect a social definition of race recognized in this country and not an attempt to define race biologically, anthropologically, or genetically. The categories represent a social-political construct designed for collecting data on the race and ethnicity of broad population groups in this country, and are not anthropologically or scientifically based. Learn more here.Other maps of interest:American Indian or Alaska Native Population in the US (Current ACS)Asian Population in the US (Current ACS)Black or African American Population in the US (Current ACS)Hawaiian or Other Pacific Islander Population in the US (Current ACS)Hispanic or Latino Population in the US (Current ACS) (some people prefer Latinx)Population who are Some Other Race in the US (Current ACS)Population who are Two or More Races in the US (Current ACS) (some people prefer mixed race or multiracial)White Population in the US (Current ACS)Race in the US by Dot DensityWhat is the most common race/ethnicity?

In 2021, Midland metropolitan area in Texas had a per capita real GDP of about 227,765 chained U.S. dollars, the highest of any metro area in the United States. The San-Jose-Sunnyvale-Santa Clara and San Francisco-Oakland-Berkely metro areas in California also had high real GDP per capita. The Seattle-Tacoma-Bellevue metro area in Washington state and the Trenton-Princeton metro area in New Jersey round out the top five. Only the top 100 metro areas by GDP per capita are shown here.

A dataset listing Oklahoma cities by population for 2024.

United States Price per Square: Townhouse: Hot Springs, AR data was reported at 82.589 USD th in Jul 2020. This records a decrease from the previous number of 206.553 USD th for Jun 2020. United States Price per Square: Townhouse: Hot Springs, AR data is updated monthly, averaging 62.501 USD th from Feb 2012 (Median) to Jul 2020, with 100 observations. The data reached an all-time high of 206.553 USD th in Jun 2020 and a record low of 27.412 USD th in Feb 2016. United States Price per Square: Townhouse: Hot Springs, AR data remains active status in CEIC and is reported by Redfin. The data is categorized under Global Database’s United States – Table US.EB060: Price per Square: by Metropolitan Areas.

United States Sold Above Asking: Townhouse: Hot Springs, AR data was reported at 0.000 % in Jul 2020. This records a decrease from the previous number of 22.222 % for Jun 2020. United States Sold Above Asking: Townhouse: Hot Springs, AR data is updated monthly, averaging 0.000 % from Feb 2012 (Median) to Jul 2020, with 100 observations. The data reached an all-time high of 100.000 % in May 2012 and a record low of 0.000 % in Jul 2020. United States Sold Above Asking: Townhouse: Hot Springs, AR data remains active status in CEIC and is reported by Redfin. The data is categorized under Global Database’s United States – Table US.EB021: Homes Sold Above Asking: by Metropolitan Areas.

This statistic shows the top 25 cities in the United States with the highest resident population as of July 1, 2022. There were about 8.34 million people living in New York City as of July 2022.