This data was collected by the Geological Survey Ireland, the Department of Culture, Heritage and the Gaeltacht, the Discovery Programme, the Heritage Council, Transport Infrastructure Ireland, New York University, the Office of Public Works and Westmeath County Council. All data formats are provided as GeoTIFF rasters but are at different resolutions. Data resolution varies depending on survey requirements. Resolutions for each organisation are as follows: GSI – 1m DCHG/DP/HC - 0.13m, 0.14m, 1m NY – 1m TII – 2m OPW – 2m WMCC - 0.25m Both a DTM and DSM are raster data. Raster data is another name for gridded data. Raster data stores information in pixels (grid cells). Each raster grid makes up a matrix of cells (or pixels) organised into rows and columns. The grid cell size varies depending on the organisation that collected it. GSI data has a grid cell size of 1 meter by 1 meter. This means that each cell (pixel) represents an area of 1 meter squared.

This Data Series Report contains lidar elevation data collected September 5 to October 11, 2012, for the barrier islands of Alabama, Mississippi and southeast Louisiana, including the coast near Port Fourchon. Most of the data were collected September 5-10, 2012, with a reflight conducted on October 11, 2012, to increase point density in some areas. Lidar data exchange format (LAS) 1.2 formatted point data files were generated based on these data. The point cloud data were processed to extract bare earth data; therefore, the point cloud data are organized into only four classes: 1-unclassified, 2-ground, 7-noise and 9-water. Aero-Metric, Inc., was contracted by the U.S. Geological Survey (USGS) to collect and process these data. The lidar data were collected at a nominal pulse spacing (NPS) of 1.0 meter (m). The horizontal projection and datum of the data are Universe Transverse Mercator, zones 15N and 16N, North American Datum 1983 (UTM Zone 15N or 16N NAD83), meters. The vertical datum is North American Vertical Datum 1988, Geoid 2012 (NAVD88, GEOID12), meters. These lidar data are available to Federal, State and local governments, emergency-response officials, resource managers, and the general public.

The Oahu, Hawaii Elevation Data Task Order involves collecting and delivering topographic elevation point data derived from multiple return light detection and ranging (LiDAR) measurements on the island of Oahu in Hawaii. The Statement of Work (SOW) for the area covering the northern 2/3 of Oahu was developed by the National Oceanic and Atmospheric Administration's (NOAA) Office for Coastal Management. A separate but related task order was issued by the USGS National Geospatial Technical Operations Center (NGTOC), under their Geospatial Products and Services Contract (GPSC), to leverage the same resources committed to the NOAA LiDAR project for the acquisition of LiDAR data in the southern 1/3 portion of Oahu. The combined task orders yielded one study area covering the entire island of Oahu. The data collected for the island of Oahu will exhibit Hydro Flattened DEMs for inclusion into the NED. The purpose of the data is for use in coastal management decision making, including applications such as flood plain mapping and water rights management. The point density for this data set was specified in the SOW at 1.15 pts/m2. The NOAA Office for Coastal Management tested the NPS (nominal pulse spacing) for this data set in April 2015. The NPS was determined to be 0.84 m. The data used in the NPS determination were the first returns of classes 1,2,9, and 10.

Note: The files can be downloaded from the Attachments section below. Please note that the total size is 180GB, so the download may take some time depending on your system’s capabilities and configuration. Topographic and bathymetric LiDAR data was collected for New York City in 2017. Topographic data was collected for the entire city, plus an additional 100 meter buffer, using a Leica ALS80 sensor equipped to capture at least 8 pulse/m2. Dates of capture for topographic data were between 05/03/2017 and 05/17/2017 during 50% leaf-off conditions. Bathymetric data was collected in select areas of the city (where bathymetric data capture was expected) using a Riegl VQ-880-G sensor equipped to capture approximately 15 pulses/m2 (1.5 Secchi depths). Dates of capture for bathymetric were between 07/04/2017 - 07/26/2017. LiDAR data was tidally-coordinated and captured between mean lower low water (+30% of mean tide) ranges. The horizontal datum for all datasets is NAD83, the vertical datum is NAVD88, Geoid 12B, and the data is projected in New York State Plane - Long Island. Units are in US Survey Feet. To learn more about these datasets, visit the interactive “Understanding the 2017 New York City LiDAR Capture” Story Map -- https://maps.nyc.gov/lidar/2017/ Please see the following link for additional documentation on this dataset -- https://github.com/CityOfNewYork/nyc-geo-metadata/blob/master/Metadata/Metadata_LiDAR_Summary.md

These files contain classified topo/bathy lidar data generated from data collected by the Coastal Zone Mapping and Imaging Lidar (CZMIL) system. CZMIL integrates a lidar sensor with simultaneous topographic and bathymetric capabilities, a digital camera and a hyperspectral imager on a single remote sensing platform for use in coastal mapping and charting activities. Native lidar data is not gen...

U.S. Geological Survey (USGS) scientists conducted field data collection efforts between October 25th and 31st, 2020 at several sites in eastern Iowa using high accuracy surveying technologies. The work was initiated as an effort to validate commercially acquired topographic light detection and ranging (lidar) data that was collected between December 7th, 2019 and November 19th, 2020 using wide area mapping lidar systems for the USGS 3D Elevation Program (3DEP). The goal was to compare and validate the airborne lidar data to topographic, structural, and infrastructural data collected through more traditional means (e.g., Global Navigational Satellite System (GNSS) surveying). Evaluating these data will provide valuable information on the performance of wide area topographic lidar mapping capabilities that are becoming more widely used in 3DEP. The airborne lidar was collected to support the U.S. Department of Agriculture (USDA) Natural Resources Conservation Service (NRCS) High Resolution Elevation Enterprise Program and the Iowa Department of Agriculture and Land Stewardship Iowa Flood Plain Program, in addition to the 3DEP mission. The data contained within this particular release are comprised of conventional survey (i.e. total station and GNSS) and ground based lidar data.

This Data Series Report contains lidar elevation data collected February 6, 2012, over the Chandeleur Islands, Louisiana. LAS 1.2 formatted point data files were generated based on these data. The point cloud data were processed to extract bare earth data; therefore, the point cloud data are classified into only these classes: 1 and 17-unclassified, 2-ground, 9-water, and 10-breakline proximity. Digital Aerial Solutions, LLC, was contracted by the USGS to collect and process these data. The lidar data were collected at a nominal pulse spacing (NPS) of 0.5 meter (m). The data are in decimal degree geographic coordinates, North American Datum 1983, National Spatial Reference System 2007 (NAD83 NSRS2007)). The vertical datum is North American Vertical Datum 1988, Geoid 2009, Geodetic Reference System 1980 (NAVD88 GEOID09 GRS80) in meters. Thirty-three LAS files, based on a 2-kilometer by 2-kilometer tiling scheme, cover the entire survey area. These lidar data are available to Federal, State and local governments, emergency-response officials, resource managers, and the general public.

LiDAR (Light Detection and Ranging) is a remote sensing technology, i.e. the technology is not in direct contact with what is being measured. From satellite, aeroplane or helicopter, a LiDAR system sends a light pulse to the ground. This pulse hits the ground and returns back to a sensor on the system. The time is recorded to measure how long it takes for this light to return. Knowing this time measurement scientists are able to create topography maps.

LiDAR data are collected as points (X,Y,Z (x & y coordinates) and z (height)). The data is then converted into gridded (GeoTIFF) data to create a Digital Terrain Model and Digital Surface Model of the earth. This LiDAR data was collected between 2015 and 2020.

Digital Terrain Models (DTM) are bare earth models (no trees or buildings) of the Earth’s surface.

Digital Surface Models (DSM) are earth models in its current state. For example, a DSM includes elevations from buildings, tree canopy, electrical power lines and other features.

This data was collected by the Geological Survey Ireland, the Department of Culture, Heritage and the Gaeltacht, the Discovery Programme, the Heritage Council, Transport Infrastructure Ireland, New York University, the Office of Public Works and Westmeath County Council. All data formats are provided as GeoTIFF rasters but are at different resolutions. Data resolution varies depending on survey requirements. Resolutions for each organisation are as follows:

GSI – 1m

DCHG/DP/HC - 0.13m, 0.14m, 1m

NY – 1m

TII – 2m

OPW – 2m

WMCC - 0.25m

Both a DTM and DSM are raster data. Raster data is another name for gridded data. Raster data stores information in pixels (grid cells). Each raster grid makes up a matrix of cells (or pixels) organised into rows and columns. The grid cell size varies depending on the organisation that collected it. GSI data has a grid cell size of 1 meter by 1 meter. This means that each cell (pixel) represents an area of 1 meter squared.

These files contain topographic lidar data classified as ground (2) and unclassified (1) in accordance with the American Society for Photogrammetry and Remote Sensing (ASPRS) classification standards. These data were collected by the Compact Hydrographic Airborne Rapid Total Survey (CHARTS) system along the coast of New Jersey. CHARTS integrates topographic and bathymetric lidar sensors, a digi...

This dataset contains a seamless high resolution, two-meter, topographic lidar digital elevation model (DEM) of the Lower Texas Coast. The elevations in this DEM represent the topographic bare-earth surface. The dataset is a fusion of several airborne topographic light detection and ranging (lidar) surveys acquired by various surveyors between the years 2007 – 2019 where coverage is primarily from 2018 and 2019. The landward extent of the lidar surveys selected for the creation of this DEM is determined by the boundary of the ADvanced CIRCulation (ADCIRC) TX2008_R35H computational mesh obtained from the Computational Hydraulics Group at The University of Texas at Austin. The spatial reference used for the tiles in the DEM is in Universal Transverse Mercator (UTM) Zone 14 in units of meters and in conformance with the North American Datum of 1983 (NAD83). All bare earth elevations are referenced to the North American Datum of 1988 (NAVD88). The 2-meter DEM of the upper Texas coast is available under GRIIDC Unique Dataset Identifier (UDI): HI.x833.000:0009 (DOI: 10.7266/2MYPTJ7Y).

This layer provides "bare earth" Digital Elevation Models developed by the USACE National Coastal Mapping Program (NCMP). The USACE NCMP acquires high-resolution, high-accuracy topographic/bathymetric lidar elevation and imagery on a recurring basis along the sandy shorelines of the US. The program's survey footprint includes an approximately 1-mile wide swath of topography, bathymetry and imagery 500-m onshore and 1000-m offshore. The standard suite of NCMP data products include topographic/bathymetric lidar point clouds, digital surface and elevation models, shoreline vectors and both true-color and hyperspectral imagery mosaics. Value-added derivative information products may include laser reflectance images, landcover classification images and volume change metrics.USACE Headquarters initiated the NCMP in 2004. The program's update cycle follows counter-clockwise along the US West Coast, Gulf Coast, East Coast and Great Lakes approximately every 5 years. Surveys in support of USACE project-specific missions and external partners are included constituent to the current NCMP schedule and reimbursable funding. All work is coordinated with Federal mapping partners through the Interagency Working Group on Ocean and Coastal Mapping (IWGOCM) and the 3D Elevation Program (3DEP).NCMP operations are executed by the Joint Airborne Lidar Bathymetry Technical Center of Expertise (JALBTCX). The JALBTCX mission is to perform operations, research and development in airborne lidar bathymetry and complementary technologies to support the coastal mapping and charting requirements of the US Army Corps of Engineers, the US Naval Meteorology and Oceanography Command and the National Oceanic and Atmospheric Administration. Survey operations are conducted worldwide using the Coastal Zone Mapping and Imaging (CZMIL) system and other industry-based coastal mapping and charting systems. CZMIL is JALBTCX's in-house survey capability that includes and Optech International, CZMIL 03-1 lidar instrument with simultaneous topographic and bathymetric capabilities. CZMIL is integrated with an Itres CASI-1500 hyperspectral imager and an 80MP Leica RCD30 RGBN camera. CZMIL collects 10-kHz lidar data with spatially- and temporally-coincident digital true-color and hyperspectral imagery.

The LiDAR LAS Index for the New York City Topographic LiDAR study area. Collected between 05/03/17 and 05/17/17.

In 2021, a complete airborne LiDAR survey of the Northern Ireland coastline was commissioned as part of the NI 3D Coastal Survey, providing precise and accurate data of the current coastal morphology.The survey included the intertidal area and extended approximately 200 meters landward of the high-water mark.This is the Digital Surface Model derived from the LiDAR data collected.

The raster index for the New York City Topographic LiDAR study area.

These files contain classified topo/bathy lidar data generated from data collected by the Coastal Zone Mapping and Imaging Lidar (CZMIL) system. CZMIL integrates a lidar sensor with simultaneous topographic and bathymetric capabilities, a digital camera and a hyperspectral imager on a single remote sensing platform for use in coastal mapping and charting activities. Native lidar data is not gen...

U.S. Geological Survey (USGS) scientists conducted field data collection efforts between July 19th and 31st, 2021 over a large stretch of the McKenzie River in Oregon using high accuracy surveying technologies. The work was initiated as an effort to validate commercially acquired topobathymetric light detection and ranging (lidar) data that was collected coincidentally between July 26th and 30th, 2021 for the USGS 3D Elevation Program (3DEP). The goal was to compare and validate the airborne lidar data to topographic, bathymetric, structural, and infrastructural data collected through more traditional means (e.g., Global Navigational Satellite System (GNSS) surveying). Evaluating these data will provide valuable information on the performance of inland topobathymetric lidar mapping capabilities and their potential for use and inclusion in the USGS National Geospatial Program 3D Elevation Program. The airborne topobathymetric lidar data will be used for developing reliable hydraulic models, which can be used to model potential flood inundation and analysis for other potential hazards such as landslides. The bathymetric lidar data will also be used for characterization of endangered species aquatic habitat, including that of salmon and steelhead trout species. Furthermore, a large portion of the McKenzie River corridor that was mapped by the airborne topobathymetric lidar was impacted by the Holiday Farm Fire that burned over 170,000 acres during September of 2020 and the airborne data will be used to support post-fire geomorphic change detection.

DEM represents the earth's surface with all vegetation and anthropogenic features removed. Collected between 05/03/17 and 05/17/17.

This dataset provides a modified version of the previously published Lake Powell topobathymetric digital elevation model (TBDEM; Poppenga and others, 2020). The original TBDEM is comprised of four source datasets: (1) a 2017 1-meter multibeam bathymetric survey; (2) a 2018 topographic light detection and ranging (lidar) derived digital elevation model (DEM); (3) a historical topographic DEM that was interpolated from contours maps created in 1947 and 1959; and (4) interpolated topography where gaps existed in the bathymetric and lidar data or where historical data were not suitable (Poppenga and others, 2020). For this data release, two corrections were made to the TBDEM to address errors associated with the historic DEM and interpolated topography across data gaps: (1) filled in selected gaps of the TBDEM dataset that were corrected with the historic DEM but have since been filled with sediment; and (2) spliced alternate topographic data sources instead of the hydro-flattened ele ...

DEM represents the earth's surface with all vegetation and anthropogenic features removed. Collected between 05/03/17 and 05/17/17.

A topographic Lidar survey was conducted on February 6, 2012, over the Chandeleur Islands, Louisiana. The data were collected at a nominal pulse space of 0.5-meter (m) and processed to identify bare earth elevations. Bare earth digital elevation models (DEMs) were generated based on these data. Digital Aerial Solutions, LLC, was contracted by the U.S. Geological Survey (USGS) to collect and process the lidar data. The bare earth DEMs are 32-bit floating point ERDAS Imagine (IMG) files with a horizontal spatial resolution of 1-m by 1-m. They are in decimal degree geographic coordinates, North American Datum 1983, National Spatial Reference System 2007 (NAD83 NSRS2007)). Their vertical datum is North American Vertical Datum 1988, Geoid 2009, Geodetic Reference System 1980 (NAVD88 GEOID09 GRS80) in meters. Thirty-three DEMs, based on a 2-kilometer (km) by 2-km tiling scheme, cover the entire survey area. These lidar data are available to Federal, State and local governments, emergency-response officials, resource managers, and the general public.