This map features a topographical map of the City and County of New York, and the adjacent Country from 1836. The map is overlayed on a contemporary topographic map of New York City and the surrounding area for comparison purposes.More information on this map …

This map features a topographical map of the City and County of New York, and the adjacent Country from 1836. The map is overlayed on a contemporary topographic map of New York City and the surrounding area for comparison purposes.More information on this map …

This list contains information on maps maintained by the topographical bureau

A list of the final section maps that would show the legal street information for Borough of Brooklyn.

This location is part of the Arizona Mineral Industry Location System (AzMILS), an inventory of mineral occurences, prospects and mine locations in Arizona. Mohave86C is located in T22N R17W Sec 5 C in the Stockton Hill - 7.5 Min quad. This collection consists of various reports, maps, records and related materials acquired by the Arizona Department of Mines and Mineral Resources regarding mining properties in Arizona. Information was obtained by various means, including the property owners, exploration companies, consultants, verbal interviews, field visits, newspapers and publications. Some sections may be redacted for copyright. Please see the access statement.

Note: The files can be downloaded from the Attachments section below. Please note that the total size is 180GB, so the download may take some time depending on your system’s capabilities and configuration. Topographic and bathymetric LiDAR data was collected for New York City in 2017. Topographic data was collected for the entire city, plus an additional 100 meter buffer, using a Leica ALS80 sensor equipped to capture at least 8 pulse/m2. Dates of capture for topographic data were between 05/03/2017 and 05/17/2017 during 50% leaf-off conditions. Bathymetric data was collected in select areas of the city (where bathymetric data capture was expected) using a Riegl VQ-880-G sensor equipped to capture approximately 15 pulses/m2 (1.5 Secchi depths). Dates of capture for bathymetric were between 07/04/2017 - 07/26/2017. LiDAR data was tidally-coordinated and captured between mean lower low water (+30% of mean tide) ranges. The horizontal datum for all datasets is NAD83, the vertical datum is NAVD88, Geoid 12B, and the data is projected in New York State Plane - Long Island. Units are in US Survey Feet. To learn more about these datasets, visit the interactive “Understanding the 2017 New York City LiDAR Capture” Story Map -- https://maps.nyc.gov/lidar/2017/ Please see the following link for additional documentation on this dataset -- https://github.com/CityOfNewYork/nyc-geo-metadata/blob/master/Metadata/Metadata_LiDAR_Summary.md

LiDAR (Light Detection and Ranging) is a remote sensing technology, i.e. the technology is not in direct contact with what is being measured. From satellite, aeroplane or helicopter, a LiDAR system sends a light pulse to the ground. This pulse hits the ground and returns back to a sensor on the system. The time is recorded to measure how long it takes for this light to return. Knowing this time measurement scientists are able to create topography maps.LiDAR data are collected as points (X,Y,Z (x & y coordinates) and z (height)). The data is then converted into gridded (GeoTIFF) data to create a Digital Terrain Model and Digital Surface Model of the earth. This LiDAR data was collected on 25th March 2015.An ordnance datum (OD) is a vertical datum used as the basis for deriving heights on maps. This data is referenced to the Malin Head Vertical Datum which is the mean sea level of the tide gauge at Malin Head, County Donegal. It was adopted as the national datum in 1970 from readings taken between 1960 and 1969 and all heights on national grid maps are measured above this datum. Digital Terrain Models (DTM) are bare earth models (no trees or buildings) of the Earth’s surface.Digital Surface Models (DSM) are earth models in its current state. For example, a DSM includes elevations from buildings, tree canopy, electrical power lines and other features. Hillshading is a method which gives a 3D appearance to the terrain. It shows the shape of hills and mountains using shading (levels of grey) on a map, by the use of graded shadows that would be cast by high ground if light was shining from a chosen direction.This data shows the hillshade of the DSM.This data was collected by New York University. All data formats are provided as GeoTIFF rasters. Raster data is another name for gridded data. Raster data stores information in pixels (grid cells). Each raster grid makes up a matrix of cells (or pixels) organised into rows and columns. NYU data has a grid cell size of 1meter by 1meter. This means that each cell (pixel) represents an area of 1meter squared.

Using a combination of public and proprietary historical construction test borings, recent exploration drilling, USGS observation wells, outcrops, and seismic measurements, a series of geospatial overlays for bedrock elevation and overburden thickness were created for the Five Boroughs of New York City, New York. Rasters were interpolated from a point elevation data set and refined using published and interpretive bedrock contours, and interpreted glacial valleys and faults. Contours for bedrock elevation were generated at 100-ft contour intervals and smoothed. This data release includes shapefiles containing the input point elevation features and output contours, and rasters of interpolated bedrock elevation and overburden thickness surfaces.

New York Map: This map features a topographical map of the City and County of New York, and the adjacent Country from 1836. The map is overlayed on a contemporary topographic map of New York City and the surrounding area for comparison purposes.More information on this map …London 1746: Rocque's 1746 London Map. More on this map

Historic LIDAR Projects within New York State. New York State has access to and distributes many of the older LIDAR collections within New York State. These historic projects have been fully replaced with more recent LIDAR projects. More information for existing LIDAR collections can be found at https://gis.ny.gov/lidar. Last updated 8/2/24.Feature and map services available:https://elevation.its.ny.gov/arcgis/rest/services/indexes/Historic_LiDAR_Collections/FeatureServerhttps://elevation.its.ny.gov/arcgis/rest/services/indexes/Historic_LiDAR_Collections/MapServerFor Latest Collections, see:https://elevation.its.ny.gov/arcgis/rest/services/indexes/Latest_LiDAR_Collections/FeatureServerhttps://elevation.its.ny.gov/arcgis/rest/services/indexes/Latest_LiDAR_Collections/MapServerPlease contact nysgis@its.ny.gov if you have any questions.

The New York State Departments of Environmental Conservation and Health are concerned about groundwater contamination in the carbonate-bedrock aquifers with the potential to host karst features throughout New York State, especially relating to the unintended introduction of chemical or agricultural contamination into these aquifers. USGS Scientific Investigations Report, SIR 2020-5030 (Kappel and others, 2020), provides local and State regulators and the public the information needed to determine the extent of carbonate bedrock in New York, the associated environmental impacts of karst, and the means to protect New York’s karst water resources. The four geodatabases presented in this data release were compiled in support of SIR 2020-5030. Closed depression-focused recharge is one potential pathway for aquifer contamination. A closed depression is any enclosed area that has no surface drainage outlet and from which water escapes only by evaporation or subsurface drainage. On a topographic map a closed depression is typically represented by a hachured contour line forming a closed loop. The map representation applies to closed depressions of both natural and anthropogenic origin. Closed depressions formed by natural processes need not be karst in origin to represent a source of focused-recharge. Three of the four geodatabases in this data release form a comprehensive inventory of all closed depressions, natural and anthropogenic, within the State which are proximal to carbonate, evaporite, or marble units and that have the potential for developing karst features. The fourth geodatabase in this data release contains a digital representation of the study area boundary adopted for the GIS analyses. The three closed depression inventory geodatabases were compiled in the following order: 1) Digital Contour Database of Closed Depressions, 2) Digital Raster Graphic Database of Closed Depressions, and 3) LiDAR Database of Closed Depressions. There is no duplication of features among these three geodatabases. Additionally, the closed depressions inventoried for this data release, were compared with closed depressions mapped in other published geospatial data to eliminate duplication with those datasets. The datasets referenced were the New York State Department of Environmental Conservation Mining Database and the National Hydrography Dataset waterbody features. The Digital Contour Database of Closed Depressions contains features derived from data associated with U.S. Geological Survey Scientific Investigations Report 2012–5167. The source data is a statewide contour dataset that was generated from the National Elevation Dataset (NED) and the National Hydrography Dataset (NHD) in a fully automated process. Closed depressions included in the Digital Raster Graphic Database of Closed Depressions were digitized from an assemblage of approximately 650 Digital Raster Graphic (DRG) images of scanned U.S. Geological Survey 1:24,000-scale topographic maps. A DRG is a scanned image of a U.S. Geological Survey topographic map that can be added as a background layer in a GIS. The LiDAR Database of Closed Depressions contains features generated from high-resolution LiDAR-derived bare-earth DEMs obtained from the New York State Office of Information Technology Services. At the time of analysis (2017) LiDAR data existed for approximately 65 percent of the study area. The DEMs were processed to identify depressions with an area of at least 4,047 square meters (1-acre) and a depth of at least 1-meter. These threshold values are greater than what is typically used for lidar-based sinkhole identification studies. For the purpose of this study, the use of lidar was primarily intended to identify closed depressions that were not represented in the Digital Raster Graphic Database, in the same manner that the DRG images were used to identify closed depressions not represented in the Digital Contour Database. For that reason, the threshold values were based on random sampling of DRG-derived closed depressions within the study area and represent the approximate mean geometric characteristics of the closed depressions sampled. For ongoing and planned larger-scale county-based assessments in New York, the thresholds will be reduced to 10- and 30-centimeters depth and 100 square meters.

Geospatial data about Suffolk County, New York Contours - 10 Foot. Export to CAD, GIS, PDF, CSV and access via API.

Link to the ScienceBase Item Summary page for the item described by this metadata record. Service Protocol: Link to the ScienceBase Item Summary page for the item described by this metadata record. Application Profile: Web Browser. Link Function: information

The Building Elevation and Subgrade data contains New York City building centroids derived from the Department of Building's (DOB) February 26th, 2022 building footprint dataset. Each record contains a grade and first floor measurement for each building (recorded as feet above sea-level in the NADV88 vertical datum) and indicates if subgrade space exists. DCP contracted with an external data vendor to generate a single point, or centroid, that represented the location of the center of every building recorded in the DOB dataset. The dataset excluded the footprints of small accessory buildings such as sheds. Each row within the dataset represents one building centroid, and records the X and Y coordinates of that centroid in the NAD 1983 coordinate system.

Layered GeoPDF 7.5 Minute Quadrangle Map. Layers of geospatial data include orthoimagery, roads, grids, geographic names, elevation contours, hydrography, and other selected map features.

This data set contains vector polygons representing the boundaries of the U.S. Geological Survey 1:24,000 topographic maps and other map and digital data boundaries used in the creation of the Environmental Sensitivity Index (ESI) for Rhode Island, Connecticut, New York, and New Jersey.This data set comprises a portion of the ESI data for Rhode Island, Connecticut, New York, and New Jersey. ESI data characterize the marine and coastal environments and wildlife by their sensitivity to spilled oil. The ESI data include information for three main components: shoreline habitats, sensitive biological resources, and human-use resources.

Link to the ScienceBase Item Summary page for the item described by this metadata record. Service Protocol: Link to the ScienceBase Item Summary page for the item described by this metadata record. Application Profile: Web Browser. Link Function: information

Layered GeoPDF 7.5 Minute Quadrangle Map. Layers of geospatial data include orthoimagery, roads, grids, geographic names, elevation contours, hydrography, and other selected map features.

This child item data set contains grids of water surface elevation for inundated areas derived from flood-inundation maps for the Schoharie Creek in North Blenheim, New York.

Layered GeoPDF 7.5 Minute Quadrangle Map. Layers of geospatial data include orthoimagery, roads, grids, geographic names, elevation contours, hydrography, and other selected map features.