This map presents land cover and detailed topographic maps for the United States. The map includes the National Park Service (NPS) Natural Earth physical map at 1.24km per pixel for the world at small scales, i-cubed eTOPO 1:250,000-scale maps for the contiguous United States at medium scales, and National Geographic TOPO! 1:100,000 and 1:24,000-scale maps (1:250,000 and 1:63,000 in Alaska) for the United States at large scales. The TOPO! maps are seamless, scanned images of United States Geological Survey (USGS) paper topographic maps. Please reference the metadata for contact information.

This dataset was created to represent the land surface elevation at 1:24,000 scale for Florida. The elevation contour lines representing the land surface elevation were digitized from United States Geological survey 1:24,000 (7.5 minute) quadrangles and were compiled by South Florida, South West Florida, St. Johns River and Suwannee River Water Management Districts and FDEP. QA and corrections to the data were supplied by the Florida Department of Environmental Protection's Florida Geological Survey and the Division of Water Resource Management. This data, representing over 1,000 USGS topographic maps, spans a variety of contour intervals including 1 and 2 meter and 5 and 10 foot. The elevation values have been normalized to feet in the final data layer. Attributes for closed topographic depressions were also captured where closed (hautchered) features were identified and the lowest elevation determined using the closest contour line minus one-half the contour interval. This data was derived from the USGS 1:24,000 topographic map series. The data is more than 20 years old and is likely out-of-date in areas of high human activity.

This topographic map is designed to be used as a basemap and a reference map. The map has been compiled by Esri and the ArcGIS user community from a variety of best available sources. The map is intended to support the ArcGIS Online basemap gallery. For more details on the map, please visit the World Hillshade and World Topographic Map.

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) conducted research to identify areas of seafloor elevation stability and instability based on elevation changes between the 1930’s and 2002 in the Upper Florida Keys (UFK) from Triumph Reef to Pickles Reef within a 234.2 square-kilometer area. USGS SPCMSC staff used seafloor elevation-change data from Yates and others (2017a) derived from an elevation-change analysis between two elevation datasets acquired in the 1930’s and 2001/2002 using the methods of Yates and others (2017b). Most of the elevation data from the 2001/2002 time period were collected during 2002, so as an abbreviated naming convention, we refer to this time period as 2002. A seafloor stability threshold was determined for the 1930’s-2002 UFK elevation-change dataset based on the vertical uncertainty of the 1930’s historical hydrographic surveys and 2002 digital elevation models (DEMs). Five stability categories (which include, Stable: 0.0 meters (m) to ±0.24 m or 0.0 m to ±0.49 m; Moderately stable: ±0.25 m to ±0.49 m; Moderately unstable: ±0.50 m to ±0.74 m; Mostly unstable: ±0.75 m to ±0.99 m; and Unstable: ±1.00 m to Max/Min elevation change) were created and used to define levels of stability and instability for each elevation-change value (25,982 data points) based on the amount of erosion and accretion during the 1930’s to 2002 time period. Seafloor-stability point and triangulated irregular network (TIN) surface models were created at five different elevation-change data resolutions (1st order through 5th order) with each resolution becoming increasingly more detailed. The stability models were used to determine the level of seafloor stability at potential areas of interest for coral restoration and 13 habitat types found in the UFK. Stability surface (TIN) models were used for areas defined by specific XY geographic points, while stability point models were used for areas defined by bounding box coordinate locations. This data release includes ArcGIS map packages containing the binned and color-coded stability point and surface (TIN) models, potential coral restoration locations, and habitat files; maps of each stability model; and data tables containing stability and elevation-change data for the potential coral restoration locations and habitat types. Data were collected under Florida Keys National Marine Sanctuary permit FKNMS-2016-068.

Elevation maps (also known as Digital Elevation Models or DEMs) of Gulf Islands National Seashore were produced from remotely-sensed, geographically-referenced elevation measurements in cooperation with NASA and NPS. Point data in ascii text files were interpolated in a GIS to create a grid or digital elevation model (DEM) of each beach surface. Elevation measurements were collected in Florida, Mississippi and Texas, over Gulf Islands National Seashore, using the NASA Experimental Advanced Airborne Research LiDAR (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation and coastal topography. The system uses high frequency laser beams directed at the earth's surface through an opening in the bottom of the aircraft's fuselage. The laser system records the time difference between emission of the laser beam and the reception of the reflected laser signal in the aircraft. The plane travels over the beach at approximately 60 meters per second while surveying from the low-water line to the landward base of the sand dunes. The EAARL, developed by the National Aeronautics and Space Administration (NASA) located at Wallops Flight Facility in Virginia, measures ground elevation with a vertical resolution of 15 centimeters. A sampling rate of 3 kHz or higher results in an extremely dense spatial elevation data set. Over 100 kilometers of coastline can be easily surveyed within a 3- to 4-hour mission time period. The ability to sample large areas rapidly and accurately is especially useful in morphologically dynamic areas such as barrier beaches. Quick assessment of topographic change can be made following storms comparing measurements against baseline data. When subsequent elevation maps for an area are analyzed, they provide a useful tool to make management decisions regarding coastal development. For more information on Lidar science and the Experimental Advanced Airborne Research Lidar (EAARL) system and surveys, see http://ngom.usgs.gov/dsp/overview/index.php and http://ngom.usgs.gov/dsp/tech/eaarl/index.php .

IMPORTANT IN THE OPEN DATA PORTAL THERE IS ONE FEATURE CLASS FOR ALL POTENTIOMETRIC SURFACE MAPS. IF YOU WANT JUST ONE TIME PERIOD CLICK ON THE TABLE TAB, THEN CLICK ON THE DATE FIELD. IN THE FILTER BOX ON THE RIGHT ENTER THE MAP YOU WANT (MAY 2000, SEPTEMBER 2015, ETC.). WHEN YOU CLICK THE DOWNLOAD DATASET BUTTON SELECT SPREADSHEET OR KML OR SHAPEFILE UNDER THE FILTERED DATASET OPTION. YOU WILL ONLY GET THE FILTERED DATA FROM THIS DOWNLOAD.Contour lines are created for the potentiometric surface of the upper Floridan aquifer from water level data submitted by the water management districts. The points associated with the water level data are added to Geostatistical Analyst and ordinary kriging is used to interpolate water level elevation values between the points. The Geostatistical Analyst layer is then converted to a grid (using GA Layer to grid tool) and then contour lines (using the Contour tool). Post editing is done to smooth the lines and fix areas that are hydrologically incorrect. The rules established for post editing are: 1) rivers intersecting the UFA follow the rule of V’s; 2) potentiometric surface contour line values don’t exceed the topographic digital elevation model (DEM) in unconfined areas; and 3) potentiometric surface contour lines don’t violate valid measured water level data. Errors are usually located where potentiometric highs are adjacent to potentiometric lows (areas where the gradient is high). Expert knowledge or additional information is used to correct the contour lines in these areas. Some additional data may be river stage values in rivers that intersect the Floridan aquifer or land elevation in unconfined areas. Contour lines created prior to May 2012 may be calculated using a different method. The potentiometric surface is only meant to describe water level elevation based on existing data for the time period measured. The contour interval for the statewide map is 10 feet and is not meant to supersede regional (water management district) or local (city) scale potentiometric surface maps.

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) conducted research to identify areas of seafloor elevation stability and instability based on elevation changes between the 1930’s and 2016 along the Florida Reef Tract (FRT) from Miami to Key West within a 982.4 square-kilometer area. USGS SPCMSC staff used seafloor elevation-change data from Yates and others (2021) derived from an elevation-change analysis between two elevation datasets acquired in the 1930’s and 2016/2017 using the methods of Yates and others (2017). Most of the elevation data from the 2016/2017 time period were collected during 2016, so as an abbreviated naming convention, we refer to this time period as 2016. A seafloor stability threshold was determined for the 1930’s-2016 FRT elevation-change dataset based on the vertical uncertainty of the 1930’s historical hydrographic surveys and 2016 digital elevation models (DEMs). Five stability categories (which include, Stable: 0.0 meters (m) to ±0.24 m or 0.0 m to ±0.49 m; Moderately stable: ±0.25 m to ±0.49 m; Moderately unstable: ±0.50 m to ±0.74 m; Mostly unstable: ±0.75 m to ±0.99 m; and Unstable: ±1.00 m to Max/Min elevation change) were created and used to define levels of stability and instability for each elevation-change value (85,253 data points) based on the amount of erosion and accretion during the 1930’s to 2016 time period. Seafloor-stability point and triangulated irregular network (TIN) surface models were created at five different elevation-change data resolutions (1st order through 5th order) with each resolution becoming increasingly more detailed. In order to view the stability models at a larger extent, the stability point and surface (TIN) models were divided into four sub-regions: Biscayne Bay, Upper Key, Middle Keys, and Lower Keys. The stability models were used to determine the level of seafloor stability at potential areas of interest for coral restoration and 14 habitat types found along the FRT. Stability surface (TIN) models were used for areas defined by specific XY geographic points, while stability point models were used for areas defined by bounding box coordinate locations. This data release includes ArcGIS map packages containing the binned and color-coded stability point and surface (TIN) models, potential coral restoration locations, habitat files, and sub-region boundaries; maps of each stability model at full extent and for each sub-region; and data tables containing stability and elevation-change data for the potential coral restoration locations and habitat types. Data were collected under Florida Keys National Marine Sanctuary permit FKNMS-2016-068. Coral restoration locations were provided by Mote Marine Laboratory under Special Activity License SAL-18-1724-SCRP.

NOAA's National Centers for Environmental Information (NCEI) is building high-resolution digital elevation models (DEMs) for select U.S. coastal regions. These integrated bathymetric-topographic DEMs are used to support individual coastal States as part of the National Tsunami Hazard Mitigation Program's (NTHMP) efforts to improve community preparedness and hazard mitigation. Bathymetric, topographic, and shoreline data used in DEM compilation are obtained from various sources including: NOAA; the U.S. Geological Survey (USGS); and other federal, state, and local government agencies, academic institutions, and private companies. DEMs are referenced to the vertical datum of NAVD 88 and horizontal datum of World Geodetic System 1984 geographic (WGS 84). Grid spacing for the DEM is 1/3 arc-second (~10 meters).

One purpose of the USGS National Assessment of Coastal Change Project is to provide accurate representations of pre-storm ground conditions for areas that are designated high-priority because they have dense populations or valuable resources that are at risk from storm waves. Another purpose of the project is to develop a broad geomorphic coastal classification that, with only minor modification, can be applied to most coastal regions in the United States.

A Coastal Classification Map describing local geomorphic features is the first step toward determining the hazard vulnerability of an area. The Coastal Classification Maps of the National Assessment of Coastal Change Project present ground conditions such as beach width, dune elevations, overwash potential, and density of development. In order to complete a hazard vulnerability assessment, that information must be integrated with other information, such as prior storm impacts and beach stability. The Coastal Classification Maps provide much of the basic information for such an assessment and represent a critical component of a storm-impact forecasting capability.

[Summary provided by the USGS.]

Link to the ScienceBase Item Summary page for the item described by this metadata record. Service Protocol: Link to the ScienceBase Item Summary page for the item described by this metadata record. Application Profile: Web Browser. Link Function: information

Environmental Sensitivity Index (ESI) maps are an integral component in oil-spill contingency planning and assessment. They serve as a source of information in the event of an oil spill incident. ESI maps contain three types of information: shoreline habitats (classified according to their sensitivity to oiling), sensitive biological resources, and human-use resources. Most often, this information is plotted on 7.5 minute U.S. Geological Survey (USGS) quadrangles, although in the Alaska ESI maps, USGS topographic maps at scales of 1:63,360 and 1:250,000 are used, and in other ESI maps, NOAA charts have been used as the base map. Collections of these maps, grouped by state or a logical geographic area, are published as ESI atlases. Digital data have been published for most of the U.S. shoreline, including Alaska, Hawaii, and Puerto Rico.

The AHF system has been deployed in a series of survey campaigns to collect over 60,000 points covering Everglades National Park, Loxahatchee National Wildlife Refuge, Water Conservation Areas 2 and 3, portions of Big Cypress National Preserve, as well as areas along the Lake Okeechobee littoral zone. Since the AHF System is able to penetrate Everglades vegetation and water cover, it has provided an unprecedented regional view of Everglades topographic gradients and sub-water surface structure. These data are now being used to simulate Everglades water flow with higher resolution and greater accuracy, to estimate water depths in real-time for field study planning, and as input for habitat models used to forecast the effects of water level changes on various important species. The elevation data collected through this project also formed the basic input to generate a regional topographic surface that is the basis for the Everglades Depth Estimation Network (EDEN). These high accuracy elevation data are made available to anyone through the South Florida Information Access website (http://sofia.usgs.gov) data exchange pages.

MAP Activity Accomplishment The USGS Airborne Height Finder (AHF) System was used to perform topographic surveys in Water Conservation Area 3A within the extents of the Lone Palm Head and North of Lone Palm Head 7.5-minute topographic map quadrangles as specified in the MAP/COE Interagency Agreement. The AHF system has been used throughout South Florida for elevation data collection because traditional surveying methods are too difficult, too costly, or simply impossible to use in the harsh wetland environment and broadly inaccessible terrain of the Florida Everglades. This is especially true considering the shear size of the hydrodynamic and biological modeling domains. The AHF is a helicopter-based instrument that uses a GPS receiver, a computer, and a mechanized plumb bob to make measurements. These data were post processed to the reference stations that are part of the AHF geodetic control network. For reasons of accuracy, these reference stations are located no more then 15 kilometers from the helicopter during AHF operations. The GPS data were post processed using Ashtech’s PNAV On The Fly (OTF) software to obtain the trajectory of the AHF platform. These results are then processed through an in-house software package that separates the actual survey points and results from the trajectory. The points are manually checked to ensure data accuracy and completeness. Digital elevation models (DEMs) were then generated from the elevation point data. Existing elevation data derived from LiDAR data for this area were replaced with AHF derived DEMs for reasons of vertical accuracy. The DEMs have been posted on the South Florida Information Access (SOFIA) website: http://sofia.usgs.gov/exchange/desmond/desmondelev.html.

Environmental Sensitivity Index (ESI) maps are an integral component in oil-spill contingency planning and assessment. They serve as a source of information in the event of an oil spill incident. ESI maps contain three types of information: shoreline habitats (classified according to their sensitivity to oiling), sensitive biological resources, and human-use resources. Most often, this information is plotted on 7.5 minute U.S. Geological Survey (USGS) quadrangles, although in the Alaska ESI maps, USGS topographic maps at scales of 1:63,360 and 1:250,000 are used, and in other ESI maps, NOAA charts have been used as the base map. Collections of these maps, grouped by state or a logical geographic area, are published as ESI atlases. Digital data have been published for most of the U.S. shoreline, including Alaska, Hawaii, and Puerto Rico.

This disk or set of disks contain high-resolution multibeam and backscatter maps of a long thin corridor at the shelf edge near he 74-m isobath spanning from Madison-Swanson (29.1667N, 85.6667W) in the north to Steamboat (28.1667N, 84.6667W), in West-Florida shelf. It includes the following products: 1) ESRI .ASC files, 2) Text file containing X, Y, Z postprocessed bathymetry data, 3) Geotiff a...

The High Accuracy Elevation Data Project collected elevation data (meters) on a 400 meter topographic grid with a vertical accuracy of +/- 15 centimeters to define the topography in South Florida. The data are referenced to the horizontal datum North American Datum 1983 (NAD 83) and the vertical datum North American Vertical Datum 1988 (NAVD 88). The High Accuracy Elevation Data Project began with a pilot study in FY 1995 to determine if the then state-of-the-art GPS technology could be used to perform a topographic survey that would meet the vertical accuracy requirements of the hydrologic modeling community. The initial testing platform was from a truck and met the accuracy requirements. Data were collected in areas near Homestead, Florida. The data are available for the areas shown on the USGS High Accuracy Elevation Data graphic at http://sofia.usgs.gov/exchange/desmond/desmondelev.html.

This disk or set of disks contain high-resolution multibeam and backscatter maps of an area North of Madison-Swanson (29.1667N, 85.6667W), in the West-Florida shelf, not included in a previous mapping expedition to the area. It includes the following products:

1) ESRI .ASC files, 2) Text file containing X, Y, Z postprocessed bathymetry data, 3) Geotiff and JPEG images from of bathymetry,...

Environmental Sensitivity Index (ESI) maps are an integral component in oil-spill contingency planning and assessment. They serve as a source of information in the event of an oil spill incident. ESI maps contain three types of information: shoreline habitats (classified according to their sensitivity to oiling), sensitive biological resources, and human-use resources. Most often, this information is plotted on 7.5 minute USGS quadrangles, although in the Alaska ESI maps, USGS topographic maps at scales of 1:63,360 and 1:250,000 are used, and in other ESI maps, NOAA charts have been used as the base map. Collections of these maps, grouped by state or a logical geographic area, are published as ESI atlases. Digital data have been published for most of the U.S. shoreline, including Alaska, Hawaii, and Puerto Rico.

NOAA's National Centers for Environmental Information is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the National Tsunami Hazard Mitigation Program's (NTHMP) efforts to improve community preparedness and hazard mitigation. These integrated bathymetric-topographic DEMs are used to support tsunami and coastal inundation mapping. Bathymetric, topographic, and shoreline data used in DEM compilation are obtained from various sources, including NGDC, the U.S. National Ocean Service (NOS), the U.S. Geological Survey (USGS), the U.S. Army Corps of Engineers (USACE), the Federal Emergency Management Agency (FEMA), and other federal, state, and local government agencies, academic institutions, and private companies. DEMs are referenced to various vertical and horizontal datums depending on the specific modeling requirements of each State. For specific datum information on each DEM, refer to the appropriate DEM documentation. Cell sizes also vary depending on the specification required by modelers in each State, but typically range from 1/3 arc-second (~10 meters) to 8 arc-seconds (~240 meters).

ASCII XYZ point cloud data were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over northwest Florida, post-Hurricane Katrina (August 2005 hurricane), using the National Aeronautics and Space Administration (NASA) Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency laser beams directed at the Earth's surface through an opening in the bottom of the aircraft's fuselage. The laser system records the time difference between emission of the laser beam and the reception of the reflected laser signal in the aircraft. The plane travels over the target area at approximately 60 meters per second at an elevation of approximately 300 meters, resulting in a laser swath of approximately 240 meters with an average point spacing of 2-3 meters. The EAARL, developed originally by NASA at Wallops Flight Facility in Virginia, measures ground elevation with a vertical resolution of 3 centimeters. A sampling rate of 3 kilohertz or higher results in an extremely dense spatial elevation dataset. Over 100 kilometers of coastline can be surveyed easily within a 3- to 4-hour mission. When resultant elevation maps for an area are analyzed, they provide a useful tool to make management decisions regarding land development.

The National Assessment of Coastal Change Hazards project derives beach morphology features from lidar elevation data for the purpose of understanding and predicting storm impacts to our nation's coastlines. This dataset defines mean beach slopes along the United States Southeast Atlantic Ocean from Miami to Jupiter, Florida for data collected at various times between 1999 and 2009.