This Open Geospatial Consortium (OGC) compliant Web Map Service (WMS) includes a mosaic of historical USGS topographic maps of New Jersey surveyed from 1881 to 1924. This product is to be used for reference purposes only. The original historical paper maps were distorted or damaged to varying degrees due to age and use. During visual testing, it appeared that spatial inaccuracies in the images exceed 200 feet in several locations. The digital product has not been corrected for distortion nor vertical displacement. Consequently, this product does not meet the National Standard for Spatial Data Accuracy (NSSDA). The mosaic was produced by scanning 15 minute (1:62,500 scale) historical USGS topographic paper maps at 600 dpi and saving them as Tagged Image File Format (TIFF) images. The scanned TIFFs have an approximate pixel resolution of 17 feet. The map images were georeferenced to a fishnet in their native coordinate system and then reprojected to NAD83 NJ State Plane coordinates for use in this service. In most client software, the default spatial reference system of the service will be Geographic Coordinates, WGS84. Several other coordinate systems are supported natively by the WMS (see Supplemental Information).

This Open Geospatial Consortium (OGC) compliant Web Map Service (WMS) includes a mosaic of historical USGS topographic maps of New Jersey surveyed from 1881 to 1924.

The data contained in these files are hydrographic and topographic data collected by the SHOALS-1000T system along the Delaware, Maryland, New Jersey, New York, North Carolina and Virginia coastline as part of the National Coastal Mapping Program. The lidar data for DE, MD, NJ and VA was collected from 20050824-20050908. The lidar data for NY and NC was collected from 20051001-20051126.

Origin...

This data set contains protected open space and recreation areas administered by the State of New Jersey Department of Environmental Protection (NJDEP). Types of property in this data layer include parcels such as parks, forests, historic sites, natural areas, wildlife management areas and Natural Lands Trust. The data was derived from a variety of source maps including tax maps, surveys and even hand-drafted boundary lines on USGS topographic maps. These source materials vary in scale and level of accuracy. Due to the varied mapped sources and methods of data capture, this data set is limited in its ability to portray all open space lands accurately, particularly the parcels purchased prior to 1991.

This DGS consists of bathymetric elevation contour lines at ten foot intervals off the New Jersey shore including parts of Delaware Bay, New York Bay, Raritan Bay and Sandy Hook Bay. The bathymetric-elevation contour lines range from -10 feet to -220 feet and extend 20 miles offshore. "Bathymetry" data represents the water depth relative to sea level. The shapefile was created from xyz ASCII grid data obtained from The National Ocean & Atmospheric Administration (NOAA), National Geophysical Data Center (NGDC), Coastal Relief Model Development Program. The data originated from a vast compilation of hydrographic soundings collected by the National Ocean Service (NOS) and various academic institutions.

description: This data set contains vector polygons representing the boundaries of the U.S. Geological Survey 1:24,000 topographic maps and other map and digital data boundaries used in the creation of the Environmental Sensitivity Index (ESI) for Rhode Island, Connecticut, New York, and New Jersey.This data set comprises a portion of the ESI data for Rhode Island, Connecticut, New York, and New Jersey. ESI data characterize the marine and coastal environments and wildlife by their sensitivity to spilled oil. The ESI data include information for three main components: shoreline habitats, sensitive biological resources, and human-use resources.; abstract: This data set contains vector polygons representing the boundaries of the U.S. Geological Survey 1:24,000 topographic maps and other map and digital data boundaries used in the creation of the Environmental Sensitivity Index (ESI) for Rhode Island, Connecticut, New York, and New Jersey.This data set comprises a portion of the ESI data for Rhode Island, Connecticut, New York, and New Jersey. ESI data characterize the marine and coastal environments and wildlife by their sensitivity to spilled oil. The ESI data include information for three main components: shoreline habitats, sensitive biological resources, and human-use resources.

Historical shoreline surveys were conducted by the National Ocean Service (NOS), dating back to the early 1800s. The maps resulting from these surveys, often called t-sheets, provide a reference of historical shoreline position that can be compared to modern data to identify shoreline change. The t-sheets are stored at the National Archives and many have been scanned by the National Oceanic and Atmospheric Administration (NOAA) and are available on the NOAA Shoreline Web site (http://www.shoreline.noaa.gov/data/datasheets/t-sheets.html). While some scanned t-sheets were georeferenced and digitized by NOAA, still others remain as non-georeferenced raster files (http://nosimagery.noaa.gov/images/shoreline_surveys/survey_scans/NOAA_Shoreline_Survey_Scans.html). New_Jersey_1839_75_Digitized_Shoreline.zip features a digitized historic shoreline for the New Jersey coastline from 1839 to 1875. The data were scanned by NOAA, but were not georeferenced. The t-sheets included in this data release are: T-121 (1839), T-119 Part 1 (1841), T-1084 (1868), T-1166 (1870), T-1333 (1871), T-1315a (1872), T-1371 (1874), T-1407 (1875). Digital files were georeferenced, corrected to a modern datum, and shorelines digitized to provide a vector polyline depicting the historical shoreline position. All shorelines, including the foreshore, backshore, mainland and island shorelines were delineated and digitized for each survey using ArcMap 10.3.1. These shorelines were digitized for use in long-term shoreline and wetland analyses for Hurricane Sandy wetland physical change assessment.

Version 10.0 of these data are part of a larger U.S. Geological Survey (USGS) project to develop an updated geospatial database of mines, mineral deposits, and mineral regions in the United States. Mine and prospect-related symbols, such as those used to represent prospect pits, mines, adits, dumps, tailings, etc., hereafter referred to as “mine” symbols or features, have been digitized from the 7.5-minute (1:24,000, 1:25,000-scale; and 1:10,000, 1:20,000 and 1:30,000-scale in Puerto Rico only) and the 15-minute (1:48,000 and 1:62,500-scale; 1:63,360-scale in Alaska only) archive of the USGS Historical Topographic Map Collection (HTMC), or acquired from available databases (California and Nevada, 1:24,000-scale only). Compilation of these features is the first phase in capturing accurate locations and general information about features related to mineral resource exploration and extraction across the U.S. The compilation of 725,690 point and polygon mine symbols from approximately 106,350 maps across 50 states, the Commonwealth of Puerto Rico (PR) and the District of Columbia (DC) has been completed: Alabama (AL), Alaska (AK), Arizona (AZ), Arkansas (AR), California (CA), Colorado (CO), Connecticut (CT), Delaware (DE), Florida (FL), Georgia (GA), Hawaii (HI), Idaho (ID), Illinois (IL), Indiana (IN), Iowa (IA), Kansas (KS), Kentucky (KY), Louisiana (LA), Maine (ME), Maryland (MD), Massachusetts (MA), Michigan (MI), Minnesota (MN), Mississippi (MS), Missouri (MO), Montana (MT), Nebraska (NE), Nevada (NV), New Hampshire (NH), New Jersey (NJ), New Mexico (NM), New York (NY), North Carolina (NC), North Dakota (ND), Ohio (OH), Oklahoma (OK), Oregon (OR), Pennsylvania (PA), Rhode Island (RI), South Carolina (SC), South Dakota (SD), Tennessee (TN), Texas (TX), Utah (UT), Vermont (VT), Virginia (VA), Washington (WA), West Virginia (WV), Wisconsin (WI), and Wyoming (WY). The process renders not only a more complete picture of exploration and mining in the U.S., but an approximate timeline of when these activities occurred. These data may be used for land use planning, assessing abandoned mine lands and mine-related environmental impacts, assessing the value of mineral resources from Federal, State and private lands, and mapping mineralized areas and systems for input into the land management process. These data are presented as three groups of layers based on the scale of the source maps. No reconciliation between the data groups was done.

Title: Ho-Tien - Scale: 1000000 - AMS 1301 - Sheet number/Numéro de feuille/Bladnummer: NJ 44

Layered GeoPDF 7.5 Minute Quadrangle Map. Layers of geospatial data include orthoimagery, roads, grids, geographic names, elevation contours, hydrography, and other selected map features.

This data set contains vector polygons representing the boundaries of the U.S. Geological Survey 1:24,000 topographic maps and other map and digital data boundaries used in the creation of the Environmental Sensitivity Index (ESI) for Rhode Island, Connecticut, New York, and New Jersey.This data set comprises a portion of the ESI data for Rhode Island, Connecticut, New York, and New Jersey. ESI data characterize the marine and coastal environments and wildlife by their sensitivity to spilled oil. The ESI data include information for three main components: shoreline habitats, sensitive biological resources, and human-use resources.

Link to the ScienceBase Item Summary page for the item described by this metadata record. Service Protocol: Link to the ScienceBase Item Summary page for the item described by this metadata record. Application Profile: Web Browser. Link Function: information

Title: Su-Fu (Kashgar) - Scale: 1000000 - Series 1301 - Sheet number/Numéro de feuille/Bladnummer: NJ 43

Link to the ScienceBase Item Summary page for the item described by this metadata record. Service Protocol: Link to the ScienceBase Item Summary page for the item described by this metadata record. Application Profile: Web Browser. Link Function: information

Title: Carte internationale du Monde, Tunis - Scale: 1000000 - Carte d'assemblage - Sheet number/Numéro de feuille/Bladnummer: NJ - 31/32*

Layered GeoPDF 7.5 Minute Quadrangle Map. Layers of geospatial data include orthoimagery, roads, grids, geographic names, elevation contours, hydrography, and other selected map features.

Layered GeoPDF 7.5 Minute Quadrangle Map. Layers of geospatial data include orthoimagery, roads, grids, geographic names, elevation contours, hydrography, and other selected map features.

Link to the ScienceBase Item Summary page for the item described by this metadata record. Service Protocol: Link to the ScienceBase Item Summary page for the item described by this metadata record. Application Profile: Web Browser. Link Function: information

Elevation datasets in New Jersey have been collected over several years as several discrete projects. Each project covers a geographic area, which is a subsection of the entire state, and has differing specifications based on the available technology at the time and project budget. The geographic extent of one project may overlap that of a neighboring project. Each of the 18 projects contains deliverable products such as LAS (Lidar point cloud) files, unclassified/classified, tiled to cover project area; relevant metadata records or documents, most adhering to the Federal Geographic Data Committee’s (FGDC) Content Standard for Digital Geospatial Metadata (CSDGM); tiling index feature class or shapefile; flights lines feature class or shapefile; Digital Elevation Model in image format or Esri grid format; other derivative data products such as contour lines feature class or shapefile.

Title: Alger, Carte internationale du Monde - Scale: 1000000 - Carte d'assemblage - Sheet number/Numéro de feuille/Bladnummer: NJ - 30/31*