In support of new permitting workflows associated with anticipated WellSTAR needs, the CalGEM GIS unit extended the existing BLM PLSS Township & Range grid to cover offshore areas with the 3-mile limit of California jurisdiction. The PLSS grid as currently used by CalGEM is a composite of a BLM download (the majority of the data), additions by the DPR, and polygons created by CalGEM to fill in missing areas (the Ranchos, and Offshore areas within the 3-mile limit of California jurisdiction).CalGEM is the Geologic Energy Management Division of the California Department of Conservation, formerly the Division of Oil, Gas, and Geothermal Resources (as of January 1, 2020).Update Frequency: As Needed

Township and Range boundaries as defined by the US Public Land Survey System (PLSS). PLSS is a way of subdividing and describing land in the United States. Most lands in the public domain are subject to subdivision by this rectangular system of surveys, which is regulated by the U.S. Department of the Interior, Bureau of Land Management. Township and Range boundaries were generated from geodetic latitude and longitude coordinate pairs as recorded on BLM's official protraction diagrams of the state of Alaska. Most corners are protracted corners, calculated by the Bureau of Land Management in lieu of field or survey locations. In 2013 and 2015 the Matanuska-Susitna Borough shifted portions of this dataset to more accurately reflect the actual locations of section corners on the ground. These shifts occurred in the more populated areas of the Matanuska-Susitna Borough. Contact the MSB GIS division for more information.

In support of new permitting workflows associated with anticipated WellSTAR needs, the CalGEM GIS unit extended the existing BLM PLSS Township & Range grid to cover offshore areas with the 3-mile limit of California jurisdiction. The PLSS grid as currently used by CalGEM is a composite of a BLM download (the majority of the data), additions by the DPR, and polygons created by CalGEM to fill in missing areas (the Ranchos, and Offshore areas within the 3-mile limit of California jurisdiction). CalGEM is the Geologic Energy Management Division of the California Department of Conservation, formerly the Division of Oil, Gas, and Geothermal Resources (as of January 1, 2020).

An area defined by the Public Lands Survey System grid that is referenced by its tier and range numbers, and is normally a rectangle approximately 6 miles on a side with boundaries conforming to meridians and parallels. Metadata

The grid layers are comprised of the mathematical calculation of the blocks, units and quarter units outside of the Peace River Block, and a representation of the township survey structure of the Peace River Block. The custodian of the Grid and its associated metadata is the Surveyor General Division of the Land Title and Survey Authority of BC.Related layers: Township Range DLS PRB (7)Section DLS PRB (8)Quarter Section DLS PRB (9)

This layer was created from the control lines used to construct the parcel base-layer and represents PLSS township/range lines.

Note that this layer and the parcels may not match exactly.

Geospatial data about Lake County, Florida Township/Range Grid. Export to CAD, GIS, PDF, CSV and access via API.

Public Land Survey System (PLSS) reference grid serves as base map information and may be used for planning and analytical purposes.Sections lines are approximate, except for those adjusted to verified section corners. Section lines adjusted to verified section corners as corners recovery sheets are received from registered surveyor.Converted from Intergraph to Graphic Data Systems (GDS) circa 1989, GDS to ESRI's SDE circa 1999. Section lines (polygons) periodically adjusted to reflect on-going section corner recovery. See Section Corners dataset for certified section and quarter corner locations, coordinates, recovery date and surveyor.

This polygon dataset is a compilation of all the townships in Snohomish County derived from the Public Land Survey System (PLSS) grid dataset. The PLSS grid is the master coverage of the PLSS maintained by the Assessor's Office. It contains linework and attribute information for townships and ranges. It is compiled from recorded surveys and plats, coordinates and linework supplied by private surveyors, Snohomish County Public Works Survey, cities, Washington State Department Of Natural Resources (DNR) and the United States Department of the Interior - Bureau of Land Management (BLM). Standard BLM methods are used to construct the aliquot grid. In coastal areas, the aliquot grid may not apply for many of the coastal sections, it has been constructed for the purposes of land title and defining map extents for automated routines.

Township boundaries were generated from geodetic latitude and longitude coordinate pairs as recorded on BLM's official protraction diagrams of the state of Alaska.

PLSS Townships and Sections dataset current as of 1988. Township and Range grid lines..

This dataset is an index of Public Land Survey System (PLSS) Township, Range, and Section lines containing the City and County of Denver.

The TRS digital data set represents the Township, Range, and Section boundaries of the state. Beginning in the late 1840s, the federal government began surveying Minnesota as part of the Public Land Survey System (PLSS). The resulting network of land survey lines divided the state into townships, ranges, sections, quarter sections, quarter-quarter sections and government lots, and laid the groundwork for contemporary land ownership patterns.

The township, range and section boundaries were digitized at MnGeo (formerly known as the Land Management Information Center - LMIC) from stable base mylars of the U.S. Geological Survey (USGS) 30-minute latitude by 60-minute longitude map series (1:100,000-scale). All survey lines were extended across water bodies despite the fact that U.S. Geological Survey base maps depict them only on land. This addition allows all sections and townships to be represented as closed areas (polygons) ensuring that township and range location can be determined for any point in the state. It also means that the data set is not affected if lake levels change over time.

The section grid for all of urban Broward County. The Public Land Survey System (PLSS) is a way of subdividing and describing land in the United States. All lands in the public domain are subject to subdivision by this rectangular system of surveys, which is regulated by the U.S. Department of the Interior, Bureau of Land Management (BLM). The PLSS typically divides lands into 6-mile-square townships, which is the level of information included in the National Atlas. Each township is identified with a township and range designation. Township designations indicate the location north or south of the baseline, and range designations indicate the location east or west of the Principal Meridian. Sections are one-square-mile blocks of land, containing 640 acres, or approximately one thirt0sicth of a township. Due to the curvature of the Earth, sections may be slightly smaller than one square mile. Range refers to a vertical column of townships in the PLSS.

Source: Parks and Recreation Division of Broward County

Effective Date:

Last Update:05/15/2015

Update Cycle: As needed

Vector polygon map data of property parcels from Oregon containing 97,943 features.

Property parcel GIS map data consists of detailed information about individual land parcels, including their boundaries, ownership details, and geographic coordinates.

Property parcel data can be used to analyze and visualize land-related information for purposes such as real estate assessment, urban planning, or environmental management.

Available for viewing and sharing as a map in a Koordinates map viewer. This data is also available for export to DWG for CAD, PDF, KML, CSV, and GIS data formats, including Shapefile, MapInfo, and Geodatabase.

Public Land Survey SystemThis feature layer, utilizing National Geospatial Data Asset (NGDA) data from the Bureau of Land Management data, displays the Public Land Survey System (PLSS) in the United States. Per BLM, "The BLM is required to perform cadastral surveys on all federal interest and Indian lands. As part of survey work, the BLM maintains an essential land grid, known as the rectangular survey system or Public Land Survey System (PLSS), which is the basis for identifying legal descriptions of land parcels."PLSS Township 7N 22EData downloaded: October 17, 2023Data source: BLM National Public Land Survey System PolygonsNGDAID: 10 (BLM National PLSS Public Land Survey System Polygons)OGC API Features Link: (Public_Land_Survey_System - OGC Features) copy this link to embed it in OGC Compliant viewersFor more information: About the Public Land Survey SystemSupport documentation: BLM National PLSS Public Land Survey System PolygonsFor feedback please contact: ArcGIScomNationalMaps@esri.comNGDA Data SetThis data set is part of the NGDA Cadastre Theme Community. Per the Federal Geospatial Data Committee (FGDC), Cadastre is defined as the "past, current, and future rights and interests in real property including the spatial information necessary to describe geographic extents. Rights and interests are benefits or enjoyment in real property that can be conveyed, transferred, or otherwise allocated to another for economic remuneration. Rights and interests are recorded in land record documents. The spatial information necessary to describe geographic extents includes surveys and legal description frameworks such as the Public Land Survey System, as well as parcel-by-parcel surveys and descriptions. Does not include federal government or military facilities."For other NGDA Content: Esri Federal Datasets

In the Public Land Survey System a Township refers to a unit of land, that is nominally six miles on a side, usually containing 36 sections.

Analysis of ‘Public Land Survey System (PLSS): Township and Range’ provided by Analyst-2 (analyst-2.ai), based on source dataset retrieved from https://catalog.data.gov/dataset/e5b48d9b-bb55-4878-8821-7a0a20666b6b on 27 January 2022.

--- Dataset description provided by original source is as follows ---

In support of new permitting workflows associated with anticipated WellSTAR needs, the CalGEM GIS unit extended the existing BLM PLSS Township & Range grid to cover offshore areas with the 3-mile limit of California jurisdiction. The PLSS grid as currently used by CalGEM is a composite of a BLM download (the majority of the data), additions by the DPR, and polygons created by CalGEM to fill in missing areas (the Ranchos, and Offshore areas within the 3-mile limit of California jurisdiction).

--- Original source retains full ownership of the source dataset ---

The Alberta Township File identifies land (section, township, range) in a grid format known as Dominion Land Survey (DLS) system. It is a graphic representation of these section boundaries (approximately 1 mile X 1 mile). The file contains Section Boundary, Section Name, Original Road Allowance and Quarter Section attribute information.

The polygons in this file represent the section boundaries determined in 1997 by examination and review of all registered legal plans in The City of Calgary. Each section within the city limits are defined by eight quarter section pins and also boundary cadastral stations. The line work was created in 2006 from data which was formally released to The City in 1997.