This polygon feature class is a representation of Public Land Survey System (PLSS) quarter sections. The data are a subset of the Wisconsin DNR's 'Landnet' database, automated from 1:24,000-scale sources.*DNR staff have added an alpha field for the range direction field in this layer called DIR_ALPHA which uses W and E instead of numerical direction codes.

This data set is a polygon shapefile representing Public Land Survey System (PLSS) sections. The data are a subset of the Wisconsin DNR's 'Landnet' database, automated from 1:24,000-scale sources.*DNR staff have added an alpha field for the range direction field in this layer called DIR_ALPHA which uses W and E instead of numerical direction codes.

The original historic plat maps for Wisconsin were created between 1832 and 1866. In most cases, the UW Digital Collections Center does not record a specific creation date for the original maps. However, the collection also contains maps which correct previous editions. These more modern maps typically have a specific date or year defined. To view the survey notes associated with this plat map, please visit http://digicoll.library.wisc.edu/cgi-bin/SurveyNotes/SurveyNotes-idx?type=PLSS&town=T026N&range=R016E.

This data set provides a means of identifying an x-y coordinate for the approximate center (centroid) of landnet units based on the corresponding standardized PLSS description (e.g., for PLSS Section this is DTRS -- Direction, Township, Range, and Section codes). This process is sometimes referred to as "protraction". The Landnet centroid shapefile includes coordinates in WTM83/91 and latitude/longitude expressed as decimal degrees or degrees, minutes and seconds.

description: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. The second division of the PLSS is quarter, quarter-quarter, sixteenth or government lot division of the PLSS. The second and third divisions are combined into this feature class as an intentional de-normalization of the PLSS hierarchical data. The polygons in this feature class represent the smallest division to the sixteenth that has been defined for the first division. For example In some cases sections have only been divided to the quarter. Divisions below the sixteenth are in the Special Survey or Parcel Feature Class. Special Surveys are non-PLSS survey areas from BLM survey records which represent federal parcels.; abstract: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. The second division of the PLSS is quarter, quarter-quarter, sixteenth or government lot division of the PLSS. The second and third divisions are combined into this feature class as an intentional de-normalization of the PLSS hierarchical data. The polygons in this feature class represent the smallest division to the sixteenth that has been defined for the first division. For example In some cases sections have only been divided to the quarter. Divisions below the sixteenth are in the Special Survey or Parcel Feature Class. Special Surveys are non-PLSS survey areas from BLM survey records which represent federal parcels.

Update frequency: as needed

Full quarter sections within Milwaukee County. These maps show engineering and tax information regarding parcels within the county and municipalities. Please visit our Quarter Section Lookup web app to download PDFs of individual engineering and tax quarter section maps.

Shapefile is projected in Wisconsin State Plane South NAD27 (WKID 32054)

This polygon feature class is a representation of Public Land Survey System (PLSS) quarter-quarter sections. The data are a subset of the Wisconsin DNR's 'Landnet' database, automated from 1:24,000-scale sources.The features in the 24K Landnet database are presented for cartographic reference only and are not intended to be official or authoritative. Survey by a registered land surveyor is the only legal basis for determining actual land boundaries or locating PLSS corners.DNR staff have added an alpha field for the range direction field in this layer called DIR_ALPHA which uses W and E instead of numerical direction codes.DNR staff have also added alpha fields for the Q1 and Q2 values, called Q1_ALPHA and Q2_ALPHA, which uses NW instead of 2, or NE instead of 1 for example.

description: Cities, Towns and Villages dataset current as of 2008. This is a polygon dataset of the municipal boundaries located within Washburn County, Wisconsin. The boundaries are derived from a variety of source data including; section and quarter section corners. Deed descriptions, Subdivision maps and Certified su.; abstract: Cities, Towns and Villages dataset current as of 2008. This is a polygon dataset of the municipal boundaries located within Washburn County, Wisconsin. The boundaries are derived from a variety of source data including; section and quarter section corners. Deed descriptions, Subdivision maps and Certified su.

description: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. These are the corners of the PLSS. This data set contains summary information about the coordinate location and reliability of corner coordinate information.; abstract: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. These are the corners of the PLSS. This data set contains summary information about the coordinate location and reliability of corner coordinate information.

description: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. These are areas of water that are defined from meander lines of the PLSS and GLO surveys. These are not the official representations of coast or water lines and are representations of the lines marked by the survey along the boundaries of meandered water at the time of survey.; abstract: This data represents the GIS Version of the Public Land Survey System including both rectangular and non-rectangular survey data. The rectangular survey data are a reference system for land tenure based upon meridian, township/range, section, section subdivision and government lots. The non-rectangular survey data represent surveys that were largely performed to protect and/or convey title on specific parcels of land such as mineral surveys and tracts. The data are largely complete in reference to the rectangular survey data at the level of first division. However, the data varies in terms of granularity of its spatial representation as well as its content below the first division. Therefore, depending upon the data source and steward, accurate subdivision of the rectangular data may not be available below the first division and the non-rectangular minerals surveys may not be present. At times, the complexity of surveys rendered the collection of data cost prohibitive such as in areas characterized by numerous, overlapping mineral surveys. In these situations, the data were often not abstracted or were only partially abstracted and incorporated into the data set. These PLSS data were compiled from a broad spectrum or sources including federal, county, and private survey records such as field notes and plats as well as map sources such as USGS 7 minute quadrangles. The metadata in each data set describes the production methods for the data content. This data is optimized for data publication and sharing rather than for specific "production" or operation and maintenance. A complete PLSS data set includes the following: PLSS Townships, First Divisions and Second Divisions (the hierarchical break down of the PLSS Rectangular surveys) PLSS Special surveys (non-rectangular components of the PLSS) Meandered Water, Corners, Metadata at a Glance (which identified last revised date and data steward) and Conflicted Areas (known areas of gaps or overlaps or inconsistencies). The Entity-Attribute section of this metadata describes these components in greater detail. These are areas of water that are defined from meander lines of the PLSS and GLO surveys. These are not the official representations of coast or water lines and are representations of the lines marked by the survey along the boundaries of meandered water at the time of survey.

This data set was collected to provide wetland information for use in county, city, village, and town planning activities in the respective counties and for regional planning activities in Southeastern Wisconsin. This was clipped from a data set that consists of digital map files containing point and polygon features of wetland information covering Kenosha, Milwaukee, Ozaukee, Racine, Walworth, Washington, and Waukesha Counties. The files were compiled by the Southeastern Wisconsin Regional Planning Commission on behalf of the Wisconsin Department of Natural Resources as part of a cooperative agreement to update the Wisconsin Wetland Inventory in Southeastern Wisconsin. Each file covers one U.S. Public Land Survey System survey township, for a total of 82 files in the data set. The survey township files have also been merged into files covering entire counties. The digital map files were compiled with reference to one-inch-equals-100-feet-scale and one-inch-equals-200-feet-scale orthophotography acquired in the Spring of 2010, and also with reference to land use, vegetation, topographic, and soils information.

Tax parcel map of Waupaca County, Wisconsin. The layer was derived from a variety of source maps including: mylar county parcel maps, plats of surveys, deed descriptions, subdivision maps, certified survey maps, highway right-of-way plats, and township highway right-of-way maps. These source materials were of several different scales and were from dates ranging from the early 1850's to the present. This map provides a useful representation of the geometry and topology of tax parcels and is suitable for its intended purpose. It is not, however, meant to be used for the determination of land ownership or to be in any way a substitute for the land ownership and interest descriptions contained in individual deeds. The tax parcel layer is available in a county-wide or individual layer for each township, city, or village.

Public Land Survey System Network for Waupaca County, WI. The layer was derived from a variety of source maps including PLSS corner tie sheets, section summaries and other survey maps filed in the County Surveyor's office. Quarter and Quarter-Quarter divisions were established by existing survey when applicable. In the absence of survey data straight line intersects between quarter corners was used to establish quarter and quarter-quarter lines. The index layer is available in a county-wide or individual layer for each township, city, or village.