The Access Network Map of England is a national composite dataset of Access layers, showing analysis of extent of Access provision for each Lower Super Output Area (LSOA), as a percentage or area coverage of access in England. The ‘Access Network Map’ was developed by Natural England to inform its work to improve opportunities for people to enjoy the natural environment. This map shows, across England, the relative abundance of accessible land in relation to where people live. Due to issues explained below, the map does not, and cannot, provide a definitive statement of where intervention is necessary. Rather, it should be used to identify areas of interest which require further exploration. Natural England believes that places where people can enjoy the natural environment should be improved and created where they are most wanted. Access Network Maps help support this work by providing means to assess the amount of accessible land available in relation to where people live. They combine all the available good quality data on access provision into a single dataset and relate this to population. This provides a common foundation for regional and national teams to use when targeting resources to improve public access to greenspace, or projects that rely on this resource. The Access Network Maps are compiled from the datasets available to Natural England which contain robust, nationally consistent data on land and routes that are normally available to the public and are free of charge. Datasets contained in the aggregated data:•
Agri-environment scheme permissive access (routes and open access)•
CROW access land (including registered common land and Section 16)•
Country Parks•
Cycleways (Sustrans Routes) including Local/Regional/National and Link Routes•
Doorstep Greens•
Local Nature Reserves•
Millennium Greens•
National Nature Reserves (accessible sites only)•
National Trails•
Public Rights of Way•
Forestry Commission ‘Woods for People’ data•
Village Greens – point data only Due to the quantity and complexity of data used, it is not possible to display clearly on a single map the precise boundary of accessible land for all areas. We therefore selected a unit which would be clearly visible at a variety of scales and calculated the total area (in hectares) of accessible land in each. The units we selected are ‘Lower Super Output Areas’ (LSOAs), which represent where approximately 1,500 people live based on postcode. To calculate the total area of accessible land for each we gave the linear routes a notional width of 3 metres so they could be measured in hectares. We then combined together all the datasets and calculated the total hectares of accessible land in each LSOA. For further information about this data see the following links:Access Network Mapping GuidanceAccess Network Mapping Metadata Full metadata can be viewed on data.gov.uk.

A PDF map that shows the Regions in England, as at December 2018. (File Size - 486 KB)

The Marine Maps and Chart Archive held by BGS contains maps created by BGS (the majority of which result from BGS offshore mapping projects) and also maps acquired from various other sources (e.g. UK Hydrographic Office and MCA Civil Hydrography Programme survey charts). The maps which date from the 1960s onwards are very variable in subject type and scale ranging from survey navigation to geological interpretation. The maps are primarily for the UKCS (United Kingdom Continental Shelf). The coverage of some map types is the entire UKCS whilst other have only regional or localised extent. The maps which are a mix of paper and digital are applicable to a wide range of uses including environmental, geotechnical, geophysical and geological studies. range of uses including environmental, geotechnical, geophysical and geological studies. Scanned maps can be viewed via the BGS maps portal http://www.bgs.ac.uk/data/maps.

This file contains the digital vector boundaries for Regions in England as at December 2024.

The boundaries available are: Generalised Clipped (BGC) - Generalised to 20m and clipped to the coastline (Mean High Water mark) and more generalised than the BFE boundaries.

Contains both Ordnance Survey and ONS Intellectual Property Rights.TopoJSON Shapefile for Power BIOn the Export tab you will find a file under the Alternative exports. This file is in TopoJSON format and is ready for use in compatible visualisation tools such as Power BI or Mapbox.

A PDF map that shows the regions and their constituent counties and unitary authorities in the United Kingdom as at 1 April 2020. (File Size - 557 KB)

This dataset is part of the Geographical repository maintained by Opendatasoft. This dataset contains data for regions in the United Kingdom.Government offices for the regions (GOR) were established across England in 1994. Reflecting a number of government departments, their aim was to work in partnership with local people and organisations in order to maximise prosperity and the quality of life within their area. In 1996 the GORs became the primary classification for the presentation of regional statistics. GORs were built up of complete counties/unitary authorities, so although they were subject to change, they always reflected administrative boundaries as at the end of the previous year. Scotland, Wales and Northern Ireland were not subdivided into GORs but are listed with them as regions in UK-wide statistical comparisons. After the Comprehensive Spending Review, it was confirmed that the GORs would close on 31 March 2011, shifting focus away from regions to local areas. However, there is still a requirement to maintain a region-level geography for statistical purposes. Processors and tools are using this data.EnhancementsAdd ISO 3166-3 codes.Simplify geometries to provide better performance across the services.Add administrative hierarchy.

A PDF map showing the output areas in the East of England Region of England as at December 2011. (File Size - 28 MB)

This layer of the GeoIndex shows the location of available 1:10000 scale digital geological maps within Great Britain. The Digital Geological Map of Great Britain project (DiGMapGB) has prepared 1:625 000, 1:250 000 and 1:50 000 scale datasets for England, Wales and Scotland. The datasets themselves are available as vector data in a variety of formats in which they are structured into themes primarily for use in geographical information systems (GIS) where they can be integrated with other types of spatial data for analysis and problem solving in many earth-science-related issues. The DiGMapGB-10 dataset is as yet incomplete, current work is concentrated on extending the geographical cover, especially to cover high priority urban areas.

This layer of the map based index (GeoIndex) provides an index to a sub set of the BGS Report Series. The reports themselves describe the local geology and are designed to be read in conjunction with their complementary map or maps. Additional information such as hydrogeology, engineering geology, geological hazards, economic minerals and made and worked ground or other specialist topics of local interest may be included.

A PDF map that shows the local authority districts, counties and unitary authorities in the United Kingdom as at April 2023. The map has been created to show the United Kingdom from country level down to local authority district level. (File Size - 1,909 KB)

Regions were built up of complete counties/unitary authorities so, although they were subject to change, they always reflected administrative boundaries as at the end of the previous year.

The Region area list contains nine areas for English Regions, and provides coverage of England only.

Please visit ONS Beginner's Guide to UK Geography for more info.

The boundaries are available as either extent of the realm (usually this is the Mean Low Water mark but in some cases boundaries extend beyond this to include off shore islands) or

clipped to the coastline (Mean High Water mark).

A PDF map that shows the Regions in United Kingdom as at December 2017. (File Size - 226 KB)

The data shows superficial polygons, bedrock polygons and fault linear geological information, sourced from published Geological Survey of Northern Ireland 1:250 000 scale maps - superficial (Quaternary 1991) and bedrock (Solid 1997). Full Northern Ireland coverage is available (Bedrock extends west into RI). The data is available in vector format. BGS licensing terms and conditions apply to external use of the data. New version available: 1:250K Geological Maps of Northern Ireland version 2

A PDF map that shows the Combined Authorities and Regions in England as at December 2021. (File Size - 454 KB)

A PDF map that shows the counties and unitary authorities in the United Kingdom as at 1 April 2023. (File Size - 583 KB)

This dataset comprises 2 collections of maps. The facsmile collection contains all the marginalia information from the original map as well as the map itself, while the georectified collection contains just the map with an associated index for locating them. Each collection comprises approximately 101 000 monochrome images at 6-inch (1:10560) scale. Each image is supplied in .tiff format with appropriate ArcView and MapInfo world files, and shows the topography for all areas of England, Wales and Scotland as either quarter or, in some cases, full sheets. The images will cover the approximate epochs 1880's, 1900's, 1910's, 1920's and 1930's, but note that coverage is not countrywide for each epoch. The data was purchased by BGS from Sitescope, who obtained it from three sources - Royal Geographical Society, Trinity College Dublin and the Ordnance Survey. The data is for internal use by BGS staff on projects, and is available via a customised application created for the network GDI enabling users to search for and load the maps of their choice. The dataset will have many uses across all the geoscientific disciplines across which BGS operates, and should be viewed as a valuable addition to the BGS archive. There has been a considerable amount of work done during 2005, 2006 and 2007 to improve the accuracy of the OS Historic Map Collection. All maps should now be located to +- 50m or better. This is the best that can be achieved cost effectively. There are a number of reasons why the maps are inaccurate. Firstly, the original maps are paper and many are over 100 years old. They have not been stored in perfect condition. The paper has become distorted to varying degrees over time. The maps were therefore not accurate before scanning. Secondly, different generations of maps will have used different surveying methods and different spatial referencing systems. The same geographical object will not necessarily be in the same spatial location on subsequent editions. Thirdly, we are discussing maps, not plans. There will be cartographic generalisations which will affect the spatial representation and location of geographic objects. Finally, the georectification was not done in BGS but by the company from whom we purchased the maps. The company no longer exists. We do not know the methodology used for georectification.

This dataset provides a 1km resolution raster (gridded) coverage of wooded areas in riparian zones (river- or streamsides) across Great Britain. The areas classified as riparian in this dataset are defined by a 50 metre buffer applied to the CEH 1:50000 watercourse network. Wooded areas within this zone are identified as those classified by the Land Cover Map of Great Britain 2007 as either coniferous or deciduous woodland. The data are aggregated to a 1km resolution.

This dataset consists of the vector version of the Land Cover Map 2015 (LCM2015) for Great Britain. The vector data set is the core LCM data set from which the full range of other LCM2015 products is derived. It provides a number of attributes including land cover at the target class level (given as an integer value and also as text), the number of pixels within the polygon classified as each land cover type and a probability value provided by the classification algorithm (for full details see the LCM2015 Dataset Documentation). The 21 target classes are based on the Joint Nature Conservation Committee (JNCC) Broad Habitats, which encompass the entire range of UK habitats. LCM2015 is a land cover map of the UK which was produced at the Centre for Ecology & Hydrology by classifying satellite images from 2014 and 2015 into 21 Broad Habitat-based classes. LCM2015 consists of a range of raster and vector products and users should familiarise themselves with the full range (see related records, the CEH web site and the LCM2015 Dataset documentation) to select the product most suited to their needs. LCM2015 was produced at the Centre for Ecology & Hydrology by classifying satellite images from 2014 and 2015 into 21 Broad Habitat-based classes. It is one of a series of land cover maps, produced by UKCEH since 1990. They include versions in 1990, 2000, 2007, 2015, 2017, 2018 and 2019.