The Access Network Map of England is a national composite dataset of Access layers, showing analysis of extent of Access provision for each Lower Super Output Area (LSOA), as a percentage or area coverage of access in England. The ‘Access Network Map’ was developed by Natural England to inform its work to improve opportunities for people to enjoy the natural environment. This map shows, across England, the relative abundance of accessible land in relation to where people live. Due to issues explained below, the map does not, and cannot, provide a definitive statement of where intervention is necessary. Rather, it should be used to identify areas of interest which require further exploration. Natural England believes that places where people can enjoy the natural environment should be improved and created where they are most wanted. Access Network Maps help support this work by providing means to assess the amount of accessible land available in relation to where people live. They combine all the available good quality data on access provision into a single dataset and relate this to population. This provides a common foundation for regional and national teams to use when targeting resources to improve public access to greenspace, or projects that rely on this resource. The Access Network Maps are compiled from the datasets available to Natural England which contain robust, nationally consistent data on land and routes that are normally available to the public and are free of charge. Datasets contained in the aggregated data:•
Agri-environment scheme permissive access (routes and open access)•
CROW access land (including registered common land and Section 16)•
Country Parks•
Cycleways (Sustrans Routes) including Local/Regional/National and Link Routes•
Doorstep Greens•
Local Nature Reserves•
Millennium Greens•
National Nature Reserves (accessible sites only)•
National Trails•
Public Rights of Way•
Forestry Commission ‘Woods for People’ data•
Village Greens – point data only Due to the quantity and complexity of data used, it is not possible to display clearly on a single map the precise boundary of accessible land for all areas. We therefore selected a unit which would be clearly visible at a variety of scales and calculated the total area (in hectares) of accessible land in each. The units we selected are ‘Lower Super Output Areas’ (LSOAs), which represent where approximately 1,500 people live based on postcode. To calculate the total area of accessible land for each we gave the linear routes a notional width of 3 metres so they could be measured in hectares. We then combined together all the datasets and calculated the total hectares of accessible land in each LSOA. For further information about this data see the following links:Access Network Mapping GuidanceAccess Network Mapping Metadata Full metadata can be viewed on data.gov.uk.

Statutory Main Rivers Map is a spatial (polyline) dataset that defines statutory watercourses in England designated as Main Rivers by the Environment Agency.

Watercourses designated as ‘main river’ are generally the larger arterial watercourses. The Environment Agency has permissive powers, but not a duty, to carry out maintenance, improvement or construction work on designated main rivers.

All other open water courses in England are determined by statute as an ‘ordinary watercourse’. On these watercourses the Lead Local flood Authority or, if within an Internal Drainage District, the Internal Drainage Board have similar permissive powers to maintain and improve.

OpenStreetMap (openstreetmap.org) is a global collaborative mapping project, which offers maps and map data released with an open license, encouraging free re-use and re-distribution. The data is created by a large community of volunteers who use a variety of simple on-the-ground surveying techniques, and wiki-syle editing tools to collaborate as they create the maps, in a process which is open to everyone. The project originated in London, and an active community of mappers and developers are based here. Mapping work in London is ongoing (and you can help!) but the coverage is already good enough for many uses. Browse the map of London on OpenStreetMap.org Downloads: The whole of England updated daily: england.osm.bz2 ~185M - .osm formatted raw XML data (compressed) england.shp.zip ~156M - ESRI shapefiles For more details of downloads available from OpenStreetMap, including downloading the whole planet, see 'planet.osm' on the wiki. Data access APIs: Download small areas of the map by bounding-box. For example this URL requests the data around Trafalgar Square: http://api.openstreetmap.org/api/0.6/map?bbox=-0.13062,51.5065,-0.12557,51.50969 Data filtered by "tag". For example this URL returns all elements in London tagged shop=supermarket: http://www.informationfreeway.org/api/0.6/*[shop=supermarket][bbox=-0.48,51.30,0.21,51.70] The .osm format The format of the data is a raw XML represention of all the elements making up the map. OpenStreetMap is composed of interconnected "nodes" and "ways" (and sometimes "relations") each with a set of name=value pairs called "tags". These classify and describe properties of the elements, and ultimately influence how they get drawn on the map. To understand more about tags, and different ways of working with this data format refer to the following pages on the OpenStreetMap wiki.

A PDF map that shows the counties and unitary authorities in the United Kingdom as at 1 April 2023. (File Size - 583 KB)

PLEASE NOTE: This data product is not available in Shapefile format or KML at https://naturalengland-defra.opendata.arcgis.com/datasets/Defra::living-england-habitat-map-phase-4/about, as the data exceeds the limits of these formats. Please select an alternative download format.This data product is also available for download in multiple formats via the Defra Data Services Platform at https://environment.data.gov.uk/explore/4aa716ce-f6af-454c-8ba2-833ebc1bde96?download=true.The Living England project, led by Natural England, is a multi-year programme delivering a satellite-derived national habitat layer in support of the Environmental Land Management (ELM) System and the Natural Capital and Ecosystem Assessment (NCEA) Pilot. The project uses a machine learning approach to image classification, developed under the Defra Living Maps project (SD1705 – Kilcoyne et al., 2017). The method first clusters homogeneous areas of habitat into segments, then assigns each segment to a defined list of habitat classes using Random Forest (a machine learning algorithm). The habitat probability map displays modelled likely broad habitat classifications, trained on field surveys and earth observation data from 2021 as well as historic data layers. This map is an output from Phase IV of the Living England project, with future work in Phase V (2022-23) intending to standardise the methodology and Phase VI (2023-24) to implement the agreed standardised methods.The Living England habitat probability map will provide high-accuracy, spatially consistent data for a range of Defra policy delivery needs (e.g. 25YEP indicators and Environment Bill target reporting Natural capital accounting, Nature Strategy, ELM) as well as external users. As a probability map, it allows the extrapolation of data to areas that we do not have data. These data will also support better local and national decision making, policy development and evaluation, especially in areas where other forms of evidence are unavailable. Process Description: A number of data layers are used to inform the model to provide a habitat probability map of England. The main sources layers are Sentinel-2 and Sentinel-1 satellite data from the ESA Copericus programme. Additional datasets were incorporated into the model (as detailed below) to aid the segmentation and classification of specific habitat classes. Datasets used:Agri-Environment Higher Level Stewardship (HLS) Monitoring, British Geological Survey Bedrock Mapping 1:50k, Coastal Dune Geomatics Mapping Ground Truthing, Crop Map of England (RPA), Dark Peak Bog State Survey, Desktop Validation and Manual Points, EA Integrated Height Model 10m, EA Saltmarsh Zonation and Extent, Field Unit NEFU, Living England Collector App NEFU/EES, Long Term Monitoring Network (LTMN), Lowland Heathland Survey, National Forest Inventory (NFI), National Grassland Survey, National Plant Monitoring Scheme, NEFU Surveys, Northumberland Border Mires, OS Vector Map District , Priority Habitats Inventory (PHI) B Button, European Space Agency (ESA) Sentinel-1 and Sentinel-2 , Space2 Eye Lens: Ainsdale NNR, Space2 Eye Lens: State of the Bog Bowland Survey, Space2 Eye Lens: State of the Bog Dark Peak Condition Survey, Space2 Eye Lens: State of the Bog (MMU) Mountain Hare Habitat Survey Dark Peak, Uplands Inventory, West Pennines Designation NVC Survey, Wetland Inventories, WorldClim - Global Climate DataFull metadata can be viewed on data.gov.uk.

This dataset presents the mean topsoil (0-15 cm) organic carbon concentration (g kg-1) and measures of its variability at 1 km resolution across Great Britain. The mean and variability metrics were calculated from an ensemble of eight previously published digital soil maps applied to all 1 km grid cells across GB where data were available from all eight maps. Four of the maps were generated from the 2007 UKCEH Countryside Survey topsoil data, two of which are available online to use. Two maps are from the International Soil Reference and Information Centre, ISRIC: SoilGrids250m v.1 (2017) and v.2 (2020) which are free to download. Two maps are from the EU’s Joint Research Centre (JRC): the OCTOP map of 2004 and LUCAS map of 2014 which are both free to download. The dataset comes in the form of a seven-band raster tiff file, with each band representing the following: 1. Mean predicted soil organic carbon concentration (g kg-1) of all eight maps at each 1 km grid cell 2. Standard deviation (g kg-1) of all eight maps at each 1 km grid cell 3. Coefficient of variation (unitless; the standard deviation divided by the mean) at each 1 km grid cell 4. Signal to noise ratio (unitless; the mean divided by the standard deviation) at each 1 km grid cell 5. Name of the map that deviates the most from the ensemble mean at each 1 km grid cell 6. Relative size (%) of the largest difference from the ensemble mean at each 1 km grid cell 7. Relative size of the largest difference from the ensemble mean expressed as the number of standard deviations exceeded at each 1 km grid cell This work was supported by the Natural Environment Research Council award number NE/R016429/1 as part of the UK-SCAPE programme delivering National Capability.

From Parliamentary constituencies to council wards, Boundary-Line™ maps every administrative boundary in detail for you. And what's more, it's completely free to download and use.

Bring statistics to life For academics or policy-makers, Boundary-Line brings the statistics in your reports to life. It lets you show differences between regions or councils using easy-to-read shaded maps.

A robust framework Monitoring outcomes by area is key for public bodies. Boundary-Line gives you a robust analytical framework to ensure the right communities get the right resources.

Individual properties When you're consulting on updating boundaries to take account of population change, Boundary-Line lets you show on a map where the line's being drawn, right down to the level of individual properties.

The National Trees Outside Woodland (TOW) V1 map is a vector product funded by DEFRA’s Natural Capital and Ecosystem Assessment (NCEA) programme produced under Forest Research’s Earth Observation for Trees and Woodlands (EOTW) project. The TOW map identifies canopy cover over 3m tall and 5m2 area which exists outside the National Forest Inventory (National Forest Inventory - Forest Research). Canopy cover is categorised into the following woodland types - lone trees, groups of trees and small woodlands. The data set was derived from the Vegetation Object Model (VOM) (Environment Agency, EA), the National Lidar Survey (EA), and Sentinel-2 (European Space Agency) imagery using spatial algorithms. The method is fully automated with no manual manipulation or editing. The map and its production method has been quality assured by DEFRA science assurance protocols and assessed for accuracy using ground truth data. Because the process classifies objects based on proximity to features within OS mapping, there could be some misclassifications of those objects not included in the OS (specifically: static caravans, shipping containers, large tents, marquees, coastal cliffs and solar farms). This is a first release of this dataset, the quality of the production methods will be reviewed over the next year, and improvements will be made where possible. The TOW map is available under open government licence and free to download from the Forestry Commission open data download website (Forestry Commission) and view online on the NCEA ArcGIS Online web portal (Trees Outside Woodland). A full report containing details on methodology, accuracy and user guide is available. TOW map web portal link : ncea.maps.arcgis.com/apps/instant/sidebar/index.html?appid=cf571f455b444e588aa94bbd22021cd3 FR TOW map web page : https://www.forestresearch.gov.uk/tools-and-resources/fthr/trees-outside-woodland-map/ Attribution statement: © Forestry Commission copyright and/or database right 2025. All rights reserved.

A PDF map that shows the Regions in England, as at December 2017. (File Size - 226 KB)

Using a range of different data sources Natural England has collated a map showing the extent of peatlands in England. For the purposes of this project, peatlands have been classified into three types based on the source of the information but assumed to have the following general characteristics:■ Deep peaty soils: Areas covered with a majority of peat >40cm deep.■ Shallow peaty soils: Areas with a majority of soils with peat 10–40cm deep.■ Soils with peaty pockets: Areas of mostly non-peat soils, supporting smaller pockets of deep peat (such as flushes or exposures of buried peat) too small to map at a national scale.Reported in Natural England's publication England's Peatland - carbon storage and greenhouse gases (NE257).We have have shared this data with permission from Natural England. You can request a download of the full dataset from enquiries@naturalengland.org.uk. It is available free of charge for non-commercial purposes. If you want to use the data for a Commercial purpose you must obtain a licence from Natural England.

The Flood Map for Planning Service includes several layers of information. This includes the Flood Zones data which shows the extent of land at present day risk of flooding from rivers and the sea, ignoring the benefits of defences, for the following scenarios:

• Flood Zone 1 – Land having a less than 0.1% (1 in 1000) annual probability of flooding. • Flood Zone 2 – Land having between 0.1% - 1% (1 in 100 to 1 in 1000) annual probability of flooding from rivers or between 0.1% - 0.5% (1 in 200 to 1 in 1000) annual probability of flooding from the sea, and accepted recorded flood outlines . • Flood Zone 3 – Areas shown to be at a 1% (1 in 100) or greater annual probability of flooding from rivers or 0.5% (1 in 200) or greater annual probability of flooding from the sea.

Flood Zone 1 is not shown in this dataset, but covers all areas not contained within Flood Zones 2 and 3. Local Planning Authorities (LPAs) use the Flood Zones to determine if they must consult the Environment Agency on planning applications. They are also used to determine if development is incompatible and whether development is subject to the exception test. The Flood Zones are one of several flood risk datasets used to determine the need for planning applications to be supported by a Flood Risk Assessment (FRA) and subject to the sequential test.

The Flood Zones are a composite dataset including national and local modelled data, and information from past floods.

The Flood Zones are designed to only give an indication of flood risk to an area of land and are not suitable for showing whether an individual property is at risk of flooding. This is because we cannot know all the details about each property.

Users of these datasets should always check they are suitable for the intended use

This is the land parcels (polygon) dataset for the UKCEH Land Cover Map of 2019 (LCM2019) representing Great Britain. It describes Great Britain's land cover in 2019 using UKCEH Land Cover Classes, which are based on UK Biodiversity Action Plan broad habitats. This dataset was derived from the corresponding LCM2019 20m classified pixels dataset. All further LCM2019 datasets for Great Britain are derived from this land parcel product. A range of land parcel attributes are provided. These include the dominant UKCEH Land Cover Class given as an integer value, and a range of per-parcel pixel statistics to help to assess classification confidence and accuracy; for a full explanation please refer to the dataset documentation. LCM2019 represents a suite of geospatial land cover datasets (raster and polygon) describing the UK land surface in 2019. These were produced at the UK Centre for Ecology & Hydrology by classifying satellite images from 2019. LCM2019 was simultaneously released with LCM2017 and LCM2018. These are the latest in a series of UKCEH land cover maps, which began with the 1990 Land Cover Map of Great Britain (now usually referred to as LCM1990) followed by UK-wide land cover maps LCM2000, LCM2007 and LCM2015. This work was supported by the Natural Environment Research Council award number NE/R016429/1 as part of the UK-SCAPE programme delivering National Capability.

Variety of freely available Ordnance Survey digital mapping datasets including postcodes and administration boundaries. These datasets can be useful in helping to map a number of other datasets available on the London Datastore such as Borough or Ward level data.

The following OS products are available to download from the OS OpenData website:

• MiniScale®
• 1:250 000 Scale Colour Raster
• OS Street View®
• Boundary-Line™
• Code-Point Open®
• 1:50 000 Scale Gazetteer
• Strategi®
• Meridian™ 2
• OS Locator™
• OS Terrain 50
• Land-Form PANORAMA®
• OS VectorMap® District (vector)
• OS VectorMap® District (raster)

https://www.ordnancesurvey.co.uk/business-and-government/products/finder.html?Licensed%20for=OpenData%20(Free)&withdrawn=on">Click here to visit the Ordnance Survey OpenData pages

https://www.ordnancesurvey.co.uk/opendatadownload/products.html">Click here to download the Ordnance Survey OpenData files

This is a collection of simple maps in PDF format that are designed to be printed off and used in the classroom. The include maps of Great Britain that show the location of major rivers, cities and mountains as well as maps of continents and the World. There is very little information on the maps to allow teachers to download them and add their own content to fit with their lesson plans. Customise one print out then photocopy them for your lesson. data not available yet, holding data set (7th August). Other. This dataset was first accessioned in the EDINA ShareGeo Open repository on 2012-08-07 and migrated to Edinburgh DataShare on 2017-02-22.

With this add in it is possible to create map templates from GIS files in KML format, and create choropleths with them. Providing you have access to KML format map boundary files, it is possible to create your own quick and easy choropleth maps in Excel. The KML format files can be converted from 'shape' files. Many shape files are available to download for free from the web, including from Ordnance Survey and the London Datastore. Standard mapping packages such as QGIS (free to download) and ArcGIS can convert the files to KML format. A sample of a KML file (London wards) can be downloaded from this page, so that users can easily test the tool out. Macros must be enabled for the tool to function. When creating the map using the Excel tool, the 'unique ID' should normally be the area code, the 'Name' should be the area name and then if required and there is additional data in the KML file, further 'data' fields can be added. These columns will appear below and to the right of the map. If not, data can be added later on next to the codes and names. In the add-in version of the tool the final control, 'Scale (% window)' should not normally be changed. With the default value 0.5, the height of the map is set to be half the total size of the user's Excel window. To run a choropleth, select the menu option 'Run Choropleth' to get this form. To specify the colour ramp for the choropleth, the user needs to enter the number of boxes into which the range is to be divided, and the colours for the high and low ends of the range, which is done by selecting coloured option boxes as appropriate. If wished, hit the 'Swap' button to change which colours are for the different ends of the range. Then hit the 'Choropleth' button. The default options for the colours of the ends of the choropleth colour range are saved in the add in, but different values can be selected but setting up a column range of up to twelve cells, anywhere in Excel, filled with the option colours wanted. Then use the 'Colour range' control to select this range, and hit apply, having selected high or low values as wished. The button 'Copy' sets up a sheet 'ColourRamp' in the active workbook with the default colours, which can just be extended or deleted with just a few cells, so saving the user time. The add-in was developed entirely within the Excel VBA IDE by Tim Lund. He is kindly distributing the tool for free on the Datastore but suggests that users who find the tool useful make a donation to the Shelter charity. It is not intended to keep the actively maintained, but if any users or developers would like to add more features, email the author. Acknowledgments Calculation of Excel freeform shapes from latitudes and longitudes is done using calculations from the Ordnance Survey.

This dataset comprises river centrelines, digitised from OS 1:50,000 mapping. It consists of four components: rivers; canals; surface pipes (man-made channels for transporting water such as aqueducts and leats); and miscellaneous channels (including estuary and lake centre-lines and some underground channels). This dataset is a representation of the river network in Great Britain as a set of line segments, i.e. it does not comprise a geometric network.

The Vice County system for Great Britain was devised by an English botanist, Hewett Cottrell Watson, for the purposes of illustrating plant distributions These digitised boundaries are available free-of-charge as a download to recorders, mapping scheme organisers, local record centres and others. This download will contain 3 datasets, an outline of GB, a zip containing individual Vice Counties and a zip containing all Vice Counties as 1 shapefile. 3 and 12 mile offshore limits are included in each zip. Data sourced from http://www.nbn.org.uk/SpecialPages/WVCB-Download.aspx and released under an Open Government Licence. GIS vector data. This dataset was first accessioned in the EDINA ShareGeo Open repository on 2013-10-31 and migrated to Edinburgh DataShare on 2017-02-22.

This dataset is refreshed on a weekly basis from the datasets the team works on daily.Last update date: 20 November 2025.National Highways Operational Highway Boundary (RedLine) maps out the land belonging to the highway for the whole Strategic Road Network (SRN). It comprises two layers; one being the an outline and another showing the registration status / category of land of land that makes up the boundary. Due to the process involved in creating junctions with local highway authority (LHA) roads, land in this dataset may represent LHA highway (owned by National Highways but the responsibility of the LHA to maintain). Surplus land or land held for future projects does not form part of this dataset.The highway boundary is derived from:Ordnance Survey Mastermap Topography,HM Land Registry National Polygon Service (National Highway titles only), andplots researched and digitised during the course of the RedLine Boundary Project.The boundary is split into categories describing the decisions made for particular plots of land. These categories are as follows:Auto-RedLine category is for plots created from an automated process using Ordnance Survey MasterMap Topography as a base. Land is not registered under National Highways' name. For example, but not limited to, unregistered ‘ancient’ highway vested in Highways England, or bridge carrying highways over a rail line.NH Title within RedLine category is for plots created from Land Registry Cadastral parcels whose proprietor is National Highways or a predecessor. Land in this category is within the highway boundary (audited) or meets a certain threshold by the algorithm.NH Title outside RedLine category is for plots created in the same way as above but these areas are thought to be outside the highway boundary. Where the Confidence is Low, land in this category is yet to be audited. Where the Confidence is High, land in this category has been reviewed and audited as outside our operational boundary.National Highways (Technician) Data category is for plots created by National Highways, digitised land parcels relating to highway land that is not registered, not yet registered or un-registerable.Road in Tunnel category, created using tunnel outlines from Ordnance Survey MasterMap Topography data. These represent tunnels on Highways England’s network. Land is not registered under National Highways' name, but land above the tunnel may be in National Highways’ title. Please refer to the definitive land ownership records held at HM Land Registry.The process attribute details how the decision was made for the particular plot of land. These are as follows:Automated category denotes data produced by an automated process. These areas are yet to be audited by the company.Audited category denotes data that has been audited by the company.Technician Data (Awaiting Audit) category denotes data that was created by National Highways but is yet to be audited and confirmed as final.The confidence attribute details how confident you can be in the decision. This attribute is derived from both the decisions made during the building of the underlying automated dataset as well as whether the section has been researched and/or audited by National Highways staff. These are as follows:High category denotes land that has a high probability of being within the RedLine boundary. These areas typically are audited or are features that are close to or on the highway.Moderate category denotes land that is likely to be within the highway boundary but is subject to change once the area has been audited.Low category denotes land that is less likely to be within the highway boundary. These plots typically represent Highways England registered land that the automated process has marked as outside the highway boundary.Please note that this dataset is indicative only. For queries about this dataset please contact the GIS and Research Team.

This dataset is primarily intended to be used for informing development decisions. This dataset is incomplete, and contains some authoritative data provided by local authorities, as well as conservation area boundaries from Historic England, and other secondary sources found on data.gov.uk. The data currently contains a number of duplicate areas we are working to remove.