A PDF map that shows the counties and unitary authorities in the United Kingdom as at 1 April 2023. (File Size - 583 KB)

The Historic Flood Map is a GIS layer showing the maximum extent of individual Recorded Flood Outlines from river, the sea and groundwater springs that meet a set criteria. It shows areas of land that have previously been subject to flooding in England. This excludes flooding from surface water, except in areas where it is impossible to determine whether the source is fluvial or surface water but the dominant source is fluvial.

The majority of records began in 1946 when predecessor bodies to the Environment Agency started collecting detailed information about flooding incidents, although we hold limited details about flooding incidents prior to this date.

If an area is not covered by the Historic Flood Map it does not mean that the area has never flooded, only that we do not currently have records of flooding in this area that meet the criteria for inclusion. It is also possible that the pattern of flooding in this area has changed and that this area would now flood or not flood under different circumstances. Outlines that don’t meet this criteria are stored in the Recorded Flood Outlines dataset.

The Historic Flood Map takes into account the presence of defences, structures, and other infrastructure where they existed at the time of flooding. It will include flood extents that may have been affected by overtopping, breaches or blockages.

Flooding is shown to the land and does not necessarily indicate that properties were flooded internally.

In the United Kingdom (UK) geological maps traditionally have been attributed with lithostratigraphical map units. However, without significant supplementary information, these maps can be only of limited use for planning and engineering works. During the middle part of the 20th century, as development of the science of engineering geology began to accelerate, engineering geological maps started to appear in various forms and at various scales to meet the challenge of making geological maps more suited to land-use planning, engineering design, building, construction and maintenance. Today, engineering geological maps are routinely used at various scales as part of the engineering planning, design and construction process. However, until recently there had been no comprehensive, readily available engineering geological map of the UK to provide the broad context for ground investigation. This paper describes the recently published (2011) 1:1 000 000 scale engineering geology superficial and bedrock maps of the UK. It describes the methodologies adopted for their creation and outlines their potential uses, limitations and future applications.

Recorded Flood Outlines is a GIS layer which shows all our records of historic flooding from rivers, the sea, groundwater and surface water. Each individual Recorded Flood Outline contains a consistent list of information about the recorded flood.

Records began in 1946 when predecessor bodies to the Environment Agency started collecting detailed information about flooding incidents, although we may hold limited details about flooding incidents prior to this date.

The absence of coverage by Recorded Flood Outlines for an area does not mean that the area has never flooded, only that we do not currently have records of flooding in this area.

It is also possible that the pattern of flooding in this area has changed and that this area would now flood or not flood under different circumstances.

The Recorded Flood Outlines take into account the presence of defences, structures, and other infrastructure where they existed at the time of flooding. It includes flood extents that may have been affected by overtopping, breaches or blockages.

Any flood extents shown do not necessarily indicate that properties were flooded internally.

A companion dataset Historic Flood Map contains a subset of these Recorded Flood Outlines which satisfy a certain criteria.

This file contains the digital vector boundaries for Counties and Unitary Authorities in the United Kingdom, as at December 2019. The boundaries available are: (BUC) Ultra Generalised (500m) - clipped to the coastline (Mean High Water mark). Contains both Ordnance Survey and ONS Intellectual Property Rights. Download File SizesUltra Generalised (500m) - clipped to the coastline (200 KB)Units for the following fields:St_length = metresSt_area = metres2REST URL of ArcGIS for INSPIRE View Service https://ons-inspire.esriuk.com/arcgis/rest/services/Administrative_Boundaries/Counties_and_Unitary_Authorities_December_2019_Boundaries_UK_BUC2/MapServer/exts/InspireView REST URL of ArcGIS for INSPIRE Feature Download Service https://ons-inspire.esriuk.com/arcgis/rest/services/Administrative_Boundaries/Counties_and_Unitary_Authorities_December_2019_Boundaries_UK_BUC2/MapServer/exts/InspireFeatureDownload REST URL of Feature Access Service https://ons-inspire.esriuk.com/arcgis/rest/services/Administrative_Boundaries/Counties_and_Unitary_Authorities_December_2019_Boundaries_UK_BUC2/FeatureServer

Strategi is detailed digital map data, ideal for applications requiring an overview of geographical information on England, Scotland and Wales. It is derived from the Ordnance Survey 1:250 000 scale topographic database and provides mapping for applications requiring a regional overview.

Geographical features within Strategi are represented as vector (point and line) data, enabling you to link your business information to relevant features on the map for planning purposes and statistical analysis.

This dataset is refreshed on a weekly basis from the datasets the team works on daily.Last update date: 05 September 2025.National Highways Operational Highway Boundary (RedLine) maps out the land belonging to the highway for the whole Strategic Road Network (SRN). It comprises two layers; one being the an outline and another showing the registration status / category of land of land that makes up the boundary. Due to the process involved in creating junctions with local highway authority (LHA) roads, land in this dataset may represent LHA highway (owned by National Highways but the responsibility of the LHA to maintain). Surplus land or land held for future projects does not form part of this dataset.The highway boundary is derived from:Ordnance Survey Mastermap Topography,HM Land Registry National Polygon Service (National Highway titles only), andplots researched and digitised during the course of the RedLine Boundary Project.The boundary is split into categories describing the decisions made for particular plots of land. These categories are as follows:Auto-RedLine category is for plots created from an automated process using Ordnance Survey MasterMap Topography as a base. Land is not registered under National Highways' name. For example, but not limited to, unregistered ‘ancient’ highway vested in Highways England, or bridge carrying highways over a rail line.NH Title within RedLine category is for plots created from Land Registry Cadastral parcels whose proprietor is National Highways or a predecessor. Land in this category is within the highway boundary (audited) or meets a certain threshold by the algorithm.NH Title outside RedLine category is for plots created in the same way as above but these areas are thought to be outside the highway boundary. Where the Confidence is Low, land in this category is yet to be audited. Where the Confidence is High, land in this category has been reviewed and audited as outside our operational boundary.National Highways (Technician) Data category is for plots created by National Highways, digitised land parcels relating to highway land that is not registered, not yet registered or un-registerable.Road in Tunnel category, created using tunnel outlines from Ordnance Survey MasterMap Topography data. These represent tunnels on Highways England’s network. Land is not registered under National Highways' name, but land above the tunnel may be in National Highways’ title. Please refer to the definitive land ownership records held at HM Land Registry.The process attribute details how the decision was made for the particular plot of land. These are as follows:Automated category denotes data produced by an automated process. These areas are yet to be audited by the company.Audited category denotes data that has been audited by the company.Technician Data (Awaiting Audit) category denotes data that was created by National Highways but is yet to be audited and confirmed as final.The confidence attribute details how confident you can be in the decision. This attribute is derived from both the decisions made during the building of the underlying automated dataset as well as whether the section has been researched and/or audited by National Highways staff. These are as follows:High category denotes land that has a high probability of being within the RedLine boundary. These areas typically are audited or are features that are close to or on the highway.Moderate category denotes land that is likely to be within the highway boundary but is subject to change once the area has been audited.Low category denotes land that is less likely to be within the highway boundary. These plots typically represent Highways England registered land that the automated process has marked as outside the highway boundary.Please note that this dataset is indicative only. For queries about this dataset please contact the GIS and Research Team.

An index to over 600 ground geophysical surveys carried out in the UK for a variety of projects. A large number of these surveys were done in conjunction with the DTI Mineral Reconnaissance Programme in the 1970's and 80's, and many others were carried out at the request of BGS field mapping groups. Information held describes the survey objective, location of measurements, geophysical methods and equipment used, reports and publications, storage locations of data and results (for analogue and digital data), dates and personnel. There are two datasets; one shows the outline of the survey areas, and the other shows the actual survey lines within each area.

A PDF map of the London boroughs as at December 2017. The map shows the London boroughs split into inner London and outer London. (File Size - 227 KB).

The map based index includes outlines for some 8,000 opencast coal prospecting sites dating from the 1940s until the mid 1990s. The index leads to information on the records of some 1 million boreholes (additional to those shown in the Borehole Records layer) drilled during site exploration and also the accompanying plans and other data, all filed in 3,618 boxes. The sites include those that have been drilled and not worked and also those that have been exploited. The original data, hardcopy maps, were received from the Coal Authority in 2001.

Primary Geological Data resulting from Open Cast Coal exploration in British coalfield areas. Maps showing the site outlines of opencast coal prospecting sites annotated with site reference number. Sites date back to the 1940s. Outlines drawn on 1:25000 scale topographic bases. The majority of the collection was deposited with the National Geological Records Centre by the Coal Authority in July 2001.

🇬🇧 United Kingdom English Geostrat Report – The Sequence Stratigraphy and Sandstone Play Fairways of the Late Jurassic Humber Group of the UK Central Graben This non-exclusive report was purchased by the NSTA from Geostrat as part of the Data Purchase tender process (TRN097012017) that was carried out during Q1 2017. The contents do not necessarily reflect the technical view of the NSTA but the report is being published in the interests of making additional sources of data and interpretation available for use by the wider industry and academic communities. The Geostrat report provides stratigraphic analyses and interpretations of data from the Late Jurassic to Early Cretaceous Humber Group across the UK Central Graben and includes a series of depositional sequence maps for eight stratigraphic intervals. Stratigraphic interpretations and tops from 189 wells (up to Release 91) are also included in the report. The outputs as published here include a full PDF report, ODM/IC .dat format sequence maps, and all stratigraphic tops (lithostratigraphy, ages, sequence stratigraphy) in .csv format for import into different interpretation platforms. In addition, the NSTA has undertaken to provide the well tops, stratigraphic interpretations and sequence maps in shapefile format that is intended to facilitate the integration of these data into projects and data storage systems held by individual organisations who are using non-ESRI ArcGIS GIS software. As part of this process, the Geostrat well names have been matched as far as possible to the NSTA well names from the NSTA Offshore Wells shapefile (as provided on the NSTA’s Open Data website) and the original polygon files have been incorporated into an ArcGIS project. All the files within the GIS folder of this delivery have been created by the NSTA. An ESRI ArcGIS version of this delivery, including geodatabases, layer files and map documents for well tops, stratigraphic interpretations and sequence maps is available on the NSTA’s Open Data website and is recommended for use with ArcGIS. All releases included in the Data Purchase tender process that have been made openly available are summarised in a mapping application available from the NSTA website. The application includes an area of interest outline for each of the products and an overview of which wellbores have been included in the products.

SUMMARYGeneral Practice (GP) catchment areas, including the GP practice name and code.DATA SOURCESThis dataset was produced using:GP Catchment Outlines. Copyright © 2020, Health and Social Care Information Centre. The Health and Social Care Information Centre is a non-departmental body created by statute, also known as NHS Digital. Data was cleaned by Ribble Rivers Trust before publishing.COPYRIGHT NOTICECopyright © 2020, Health and Social Care Information Centre. The Health and Social Care Information Centre is a non-departmental body created by statute, also known as NHS Digital. This dataset has been cleaned by Ribble Rivers Trust.CaBA HEALTH & WELLBEING EVIDENCE BASEThis dataset forms part of the wider CaBA Health and Wellbeing Evidence Base.

This dataset defines the boundaries of twelve Nature Recovery Projects forming a key part of the 25 Year Environment Plan’s commitment to deliver the Nature Recovery Network (NRN). The twelve projects included in this dataset are: East of Eden, Purple Horizons, Somerset Coast Levels and Moors, G7 Legacy, Wye Valley, Wendling Beck, Lost Wetlands, Heathland Connections, Bradford & South Pennines, Seaford to Eastbourne: Drink-in the Downs, Tees Estuary Recovering Nature (TERN), Cambridge Nature Network. The boundary for the Lost Wetlands Project has not yet been confirmed and is subject to change.The Nature Recovery Projects form a key part of the 25 Year Environment Plan’s commitment to deliver the Nature Recovery Network (NRN). They aim to follow Lawton principles to create more, bigger, better and, crucially, connected, sustained and functional wildlife-rich places. Places that counter biodiversity loss, adapt to climate change and support the needs of local communities. They will provide natural solutions to reduce carbon emissions, enhance our landscapes and cultural heritage, manage flood risk and enable  people to enjoy and connect with nature where they live, work and play – benefiting health and wellbeing. This dataset shows the location and boundaries of Nature Recovery Projects throughout England. The main outline of each one was provided by the project lead, and in some cases these were refined by following geographic or administrative boundairies as listed below: OS Open rivers (OGL), AONBs (OGL), County Boundaries (OGL), OS Open Roads (OGL), SSSIs (OGL), Environmentally Sensitive Areas (OGL), Flood Risk Zone 3 (OGL), NNRs (OGL), Marine Conservation Zone (OGL).Full metadata can be viewed on data.gov.uk.