Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, the decennial census is the official source of population totals for April 1st of each decennial year. In between censuses, the Census Bureau's Population Estimates Program produces and disseminates the official estimates of the population for the nation, states, counties, cities, and towns and estimates of housing units and the group quarters population for states and counties..Information about the American Community Survey (ACS) can be found on the ACS website. Supporting documentation including code lists, subject definitions, data accuracy, and statistical testing, and a full list of ACS tables and table shells (without estimates) can be found on the Technical Documentation section of the ACS website.Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Source: U.S. Census Bureau, 2023 American Community Survey 1-Year Estimates.ACS data generally reflect the geographic boundaries of legal and statistical areas as of January 1 of the estimate year. For more information, see Geography Boundaries by Year..Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted roughly as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see ACS Technical Documentation). The effect of nonsampling error is not represented in these tables..Users must consider potential differences in geographic boundaries, questionnaire content or coding, or other methodological issues when comparing ACS data from different years. Statistically significant differences shown in ACS Comparison Profiles, or in data users' own analysis, may be the result of these differences and thus might not necessarily reflect changes to the social, economic, housing, or demographic characteristics being compared. For more information, see Comparing ACS Data..Foreign born excludes people born outside the United States to a parent who is a U.S. citizen..Tables for Workplace Geography are only available for States; Counties; Places; County Subdivisions in selected states (CT, ME, MA, MI, MN, NH, NJ, NY, PA, RI, VT, WI); Combined Statistical Areas; Metropolitan and Micropolitan Statistical Areas, and their associated Metropolitan Divisions and Principal Cities. Tables B08601, B08602, B08603, and B08604 are also available for Place parts and County Subdivision parts for the 5-year ACS datasets..Workers include members of the Armed Forces and civilians who were at work last week..Industry titles and their 4-digit codes are based on the 2022 North American Industry Classification System. The Industry categories adhere to the guidelines issued in Clarification Memorandum No. 2, "NAICS Alternate Aggregation Structure for Use By U.S. Statistical Agencies," issued by the Office of Management and Budget..Occupation titles and their 4-digit codes are based on the 2018 Standard Occupational Classification..When information is missing or inconsistent, the Census Bureau logically assigns an acceptable value using the response to a related question or questions. If a logical assignment is not possible, data are filled using a statistical process called allocation, which uses a similar individual or household to provide a donor value. The "Allocated" section is the number of respondents who received an allocated value for a particular subject..Estimates of urban and rural populations, housing units, and characteristics reflect boundaries of urban areas defined based on 2020 Census data. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..Explanation of Symbols:- The estimate could not be computed because there were an insufficient number of sample observations. For a ratio of medians estimate, one or both of the median estimates falls in the lowest interval or highest interval of an open-ended distribution. For a 5-year median estimate, the margin of error associated with a median was larger than the median itself.N The estimate or margin of error cannot be displayed because there were an insufficient number of sample cases in the selected geographic area. (X) The estimate or margin of error is not applicable or not available.median- The median falls in the lowest interval of an open-ended distribution (for example "2,500-")median+ The median falls in...

Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, for 2020, the 2020 Census provides the official counts of the population and housing units for the nation, states, counties, cities, and towns. For 2016 to 2019, the Population Estimates Program provides estimates of the population for the nation, states, counties, cities, and towns and intercensal housing unit estimates for the nation, states, and counties..Supporting documentation on code lists, subject definitions, data accuracy, and statistical testing can be found on the American Community Survey website in the Technical Documentation section.Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Source: U.S. Census Bureau, 2016-2020 American Community Survey 5-Year Estimates.Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted roughly as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see ACS Technical Documentation). The effect of nonsampling error is not represented in these tables..Foreign born excludes people born outside the United States to a parent who is a U.S. citizen..Tables for Workplace Geography are only available for States; Counties; Places; County Subdivisions in selected states (CT, ME, MA, MI, MN, NH, NJ, NY, PA, RI, VT, WI); Combined Statistical Areas; Metropolitan and Micropolitan Statistical Areas, and their associated Metropolitan Divisions and Principal Cities; Combined New England City and Town Areas; New England City and Town Areas, and their associated Divisions and Principal Cities. Tables B08601, B08602, B08603, and B08604 are also available for Place parts and County Subdivision parts for the 5-year ACS datasets..Workers include members of the Armed Forces and civilians who were at work last week..Industry titles and their 4-digit codes are based on the North American Industry Classification System (NAICS). The Census industry codes for 2018 and later years are based on the 2017 revision of the NAICS. To allow for the creation of multiyear tables, industry data in the multiyear files (prior to data year 2018) were recoded to the 2017 Census industry codes. We recommend using caution when comparing data coded using 2017 Census industry codes with data coded using Census industry codes prior to data year 2018. For more information on the Census industry code changes, please visit our website at https://www.census.gov/topics/employment/industry-occupation/guidance/code-lists.html..When information is missing or inconsistent, the Census Bureau logically assigns an acceptable value using the response to a related question or questions. If a logical assignment is not possible, data are filled using a statistical process called allocation, which uses a similar individual or household to provide a donor value. The "Allocated" section is the number of respondents who received an allocated value for a particular subject..2019 ACS data products include updates to several categories of the existing means of transportation question. For more information, see: Change to Means of Transportation..Occupation titles and their 4-digit codes are based on the Standard Occupational Classification (SOC). The Census occupation codes for 2018 and later years are based on the 2018 revision of the SOC. To allow for the creation of the multiyear tables, occupation data in the multiyear files (prior to data year 2018) were recoded to the 2018 Census occupation codes. We recommend using caution when comparing data coded using 2018 Census occupation codes with data coded using Census occupation codes prior to data year 2018. For more information on the Census occupation code changes, please visit our website at https://www.census.gov/topics/employment /industry-occupation/guidance/code-lists.html..In 2019, methodological changes were made to the class of worker question. These changes involved modifications to the question wording, the category wording, and the visual format of the categories on the questionnaire. The format for the class of worker categories are now listed under the headings "Private Sector Employee," "Government Employee," and "Self-Employed or Other." Additionally, the category of Active Duty was added as one of the response categories under the "Government Employee" section for the mail questionnaire. For more detailed info...

Graph and download economic data for Rental Vacancy Rate in the United States (RRVRUSQ156N) from Q1 1956 to Q2 2025 about vacancy, rent, rate, and USA.

Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, for 2020, the 2020 Census provides the official counts of the population and housing units for the nation, states, counties, cities, and towns. For 2016 to 2019, the Population Estimates Program provides estimates of the population for the nation, states, counties, cities, and towns and intercensal housing unit estimates for the nation, states, and counties..Supporting documentation on code lists, subject definitions, data accuracy, and statistical testing can be found on the American Community Survey website in the Technical Documentation section.Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Source: U.S. Census Bureau, 2016-2020 American Community Survey 5-Year Estimates.Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted roughly as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see ACS Technical Documentation). The effect of nonsampling error is not represented in these tables..Tables for Workplace Geography are only available for States; Counties; Places; County Subdivisions in selected states (CT, ME, MA, MI, MN, NH, NJ, NY, PA, RI, VT, WI); Combined Statistical Areas; Metropolitan and Micropolitan Statistical Areas, and their associated Metropolitan Divisions and Principal Cities; Combined New England City and Town Areas; New England City and Town Areas, and their associated Divisions and Principal Cities. Tables B08601, B08602, B08603, and B08604 are also available for Place parts and County Subdivision parts for the 5-year ACS datasets..These tabulations are produced to provide estimates of workers at the location of their workplace. Estimates of counts of workers at the workplace may differ from those of other programs because of variations in definitions, coverage, methods of collection, reference periods, and estimation procedures. The ACS is a household survey which provides data that pertains to individuals, families, and households..Workers include members of the Armed Forces and civilians who were at work last week..When information is missing or inconsistent, the Census Bureau logically assigns an acceptable value using the response to a related question or questions. If a logical assignment is not possible, data are filled using a statistical process called allocation, which uses a similar individual or household to provide a donor value. The "Allocated" section is the number of respondents who received an allocated value for a particular subject..2019 ACS data products include updates to several categories of the existing means of transportation question. For more information, see: Change to Means of Transportation..The 2016-2020 American Community Survey (ACS) data generally reflect the September 2018 Office of Management and Budget (OMB) delineations of metropolitan and micropolitan statistical areas. In certain instances, the names, codes, and boundaries of the principal cities shown in ACS tables may differ from the OMB delineation lists due to differences in the effective dates of the geographic entities..Estimates of urban and rural populations, housing units, and characteristics reflect boundaries of urban areas defined based on Census 2010 data. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..Explanation of Symbols:- The estimate could not be computed because there were an insufficient number of sample observations. For a ratio of medians estimate, one or both of the median estimates falls in the lowest interval or highest interval of an open-ended distribution.N The estimate or margin of error cannot be displayed because there were an insufficient number of sample cases in the selected geographic area. (X) The estimate or margin of error is not applicable or not available.median- The median falls in the lowest interval of an open-ended distribution (for example "2,500-")median+ The median falls in the highest interval of an open-ended distribution (for example "250,000+").** The margin of error could not be computed because there were an insufficient number of sample observations.*** The margin of error could not be computed because the median falls in the lowest interval or highest interval of an open-ended distribution.***** A margin of e...

Context

This data was collected and created for a project in a data science course I took in college in the Spring of 2020. I have updated the data to include more dates into the summer and decided to share it and the code so others can explore it.

Content

Data

Hospitals.csv

Available here: https://hifld-geoplatform.opendata.arcgis.com/datasets/hospitals

Information on hospitals in the United States.

us-counties.csv

Available here: https://github.com/nytimes/covid-19-data

Daily covid cases and death data for us counties.

co-est2019-alldata.csv

Available here: https://www2.census.gov/programs-surveys/popest/datasets/2010-2019/counties/totals/

Data sheet available here: https://www2.census.gov/programs-surveys/popest/technical-documentation/file-layouts/2010-2019/co-est2019-alldata.pdf

2019 county level census estimates.

daily.csv

Available here: https://covidtracking.com/api/v1/states/daily.csv

Daily state level covid testing data.

Uploaded with Git LFS

CountyHospitalCombined.csv, CovCountyHospitalTimeSeries.csv, and StateTestingTimeSeries.csv

Intereim data views created by me to hold cleaned data and used to create the final datset.

MasterTimeSeries.csv

Final combined dataset, a days X 3142(num of us counties+dc) long time series with variables stored as a proportion of population.

Uploaded with Git LFS

Code

The python scripts have comments to explain which datasets they're responsible for generating.

Feel free to use and edit them to tailor the datasets generated to your liking.

There is also a helper function library in the main directory.

Scripts can be ran by calling >python

Millennials were the largest generation group in the United States in 2024, with an estimated population of ***** million. Born between 1981 and 1996, Millennials recently surpassed Baby Boomers as the biggest group, and they will continue to be a major part of the population for many years. The rise of Generation Alpha Generation Alpha is the most recent to have been named, and many group members will not be able to remember a time before smartphones and social media. As of 2024, the oldest Generation Alpha members were still only aging into adolescents. However, the group already makes up around ***** percent of the U.S. population, and they are said to be the most racially and ethnically diverse of all the generation groups. Boomers vs. Millennials The number of Baby Boomers, whose generation was defined by the boom in births following the Second World War, has fallen by around ***** million since 2010. However, they remain the second-largest generation group, and aging Boomers are contributing to steady increases in the median age of the population. Meanwhile, the Millennial generation continues to grow, and one reason for this is the increasing number of young immigrants arriving in the United States.

Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, it is the Census Bureau's Population Estimates Program that produces and disseminates the official estimates of the population for the nation, states, counties, cities, and towns and estimates of housing units for states and counties..Supporting documentation on code lists, subject definitions, data accuracy, and statistical testing can be found on the American Community Survey website in the Technical Documentation section.Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Source: U.S. Census Bureau, 2015-2019 American Community Survey 5-Year Estimates.Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted roughly as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see ACS Technical Documentation). The effect of nonsampling error is not represented in these tables..Tables for Workplace Geography are only available for States; Counties; Places; County Subdivisions in selected states (CT, ME, MA, MI, MN, NH, NJ, NY, PA, RI, VT, WI); Combined Statistical Areas; Metropolitan and Micropolitan Statistical Areas, and their associated Metropolitan Divisions and Principal Cities; Combined New England City and Town Areas; New England City and Town Areas, and their associated Divisions and Principal Cities. Tables B08601, B08602, B08603, and B08604 are also available for Place parts and County Subdivision parts for the 5-year ACS datasets..These tabulations are produced to provide estimates of workers at the location of their workplace. Estimates of counts of workers at the workplace may differ from those of other programs because of variations in definitions, coverage, methods of collection, reference periods, and estimation procedures. The ACS is a household survey which provides data that pertains to individuals, families, and households..Workers include members of the Armed Forces and civilians who were at work last week..When information is missing or inconsistent, the Census Bureau logically assigns an acceptable value using the response to a related question or questions. If a logical assignment is not possible, data are filled using a statistical process called allocation, which uses a similar individual or household to provide a donor value. The "Allocated" section is the number of respondents who received an allocated value for a particular subject..2019 ACS data products include updates to several categories of the existing means of transportation question. For more information, see: Change to Means of Transportation..The 2015-2019 American Community Survey (ACS) data generally reflect the September 2018 Office of Management and Budget (OMB) delineations of metropolitan and micropolitan statistical areas. In certain instances, the names, codes, and boundaries of the principal cities shown in ACS tables may differ from the OMB delineation lists due to differences in the effective dates of the geographic entities..Estimates of urban and rural populations, housing units, and characteristics reflect boundaries of urban areas defined based on Census 2010 data. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..Explanation of Symbols:An "**" entry in the margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate.An "-" entry in the estimate column indicates that either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution, or the margin of error associated with a median was larger than the median itself.An "-" following a median estimate means the median falls in the lowest interval of an open-ended distribution.An "+" following a median estimate means the median falls in the upper interval of an open-ended distribution.An "***" entry in the margin of error column indicates that the median falls in the lowest interval or upper interval of an open-ended distribution. A statistical test is not appropriate.An "*****" entry in the margin of...

Graph and download economic data for Average Sales Price of Houses Sold for the United States (ASPUS) from Q1 1963 to Q2 2025 about sales, housing, and USA.

In this dataset we present two maps that estimate the location and population served by domestic wells in the contiguous United States. The first methodology, called the “Block Group Method” or BGM, builds upon the original block-group data from the 1990 census (the last time the U.S. Census queried the population regarding their source of water) by incorporating higher resolution census block data. The second methodology, called the “Road-Enhanced Method” or REM, refines the locations by using a buffer expansion and shrinkage technique along roadways to define areas where domestic wells exist. The fundamental assumption with this method is that houses (and therefore domestic wells) are located near a named road. The results are presented as two nationally consistent domestic-well population datasets. While both methods can be considered valid, the REM map is more precise in locating domestic wells; the REM map had a smaller amount of spatial bias (nearly equal vs biased in type 1 error), total error (10.9% vs 23.7%,), and distance error (2.0 km vs 2.7 km), when comparing the REM and BGM maps to a California calibration map. However, the BGM map is more inclusive of all potential locations for domestic wells. The primary difference in the BGM and the REM is the mapping of low density areas. The REM has a 57% reduction in areas mapped as low density (populations greater than 0 but less than 1 person per km), concentrating populations into denser regions. Therefore, if one is trying to capture all of the potential areas of domestic-well usage, then the BGM map may be more applicable. If location is more imperative, then the REM map is better at identifying areas of the landscape with the highest probability of finding a domestic well. Depending on the purpose of a study, a combination of both maps can be used. For space concerns, the datasets have been divided into two separate geodatabases. The BGM map geodatabase and the REM map database.

The Survey of Consumer Finances (SCF) is normally a triennial cross-sectional survey of U.S. families. The survey data include information on families' balance sheets, pensions, income, and demographic characteristics.

Updates data on the size, composition and territorial distribution of the population, households and existing housing in the country. Data 2020.

Abstract

The Labour Force Survey (LFS) is a study of the employment circumstances of the UK population. It is the largest household study in the UK and provides the official measures of employment and unemployment.The first Labour Force Survey (LFS) in the United Kingdom was conducted in 1973, under the terms of a Regulation derived from the Treaty of Rome. The provision of information for the Statistical Office of the European Communities (SOEC) continued to be one of the reasons for carrying out the survey on an annual basis. SOEC co-ordinated information from labour force surveys in the member states in order to assist the EC in such matters as the allocation of the Social Fund. The survey was carried out biennially from 1973 to 1983 and was increasingly used by UK government departments to obtain information which would assist in the framing of social and economic policy. By 1983 it was being used by the Employment Department (now the Department for Work and Pensions) to obtain information which was not available from other sources or was only available for Census years. From 1984 the survey was carried out annually, and since that time the LFS has consisted of two elements:

• a quarterly survey conducted in Great Britain throughout the year, in which each sampled address was called on five times at quarterly intervals, and which yielded about 15,000 responding households in every quarter;
• a 'boost' survey in the spring quarter (March-May), which produced interviews at over 44,000 households in Great Britain and over 4,000 households in Northern Ireland.

Users should note that only the data from the spring quarter and the 'boost' survey were included in the annual datasets for public release, and that only data from 1975-1991 are available from the UK Data Archive. The depositor recommends only considered use of data for 1975 and 1977 (SNs 1757 and 1758), as the concepts behind the definitions of economic activity changed and are not comparable with later years. Also the survey methodology was being developed at the time and so the estimates may not be reliable enough to use.

During 1991 the survey was developed, so that from spring 1992 the data were made available quarterly, with a quarterly sample size approximately equivalent to that of the previous annual data. The Quarterly Labour Force Survey series therefore superseded the annual LFS series, and is held at the Data Archive under GN 33246.

The study is being conducted by the Office for National Statistics (ONS), the government's largest producer of statistics. They compile independent information about the UK's society and economy which provides evidence for policy and decision making, and for directing resources to where they are needed most. The ten-yearly census, measures of inflation, the National Accounts, and population and migration statistics are some of our highest-profile outputs.

Geographic coverage

The whole country.

Analysis unit

• Individuals
• Families/households

Universe

• Households
• All persons normally resident in private households in the United Kingdom

Kind of data

Sample survey data [ssd]

Sampling procedure

Stratified multi-stage sample; for further details see annual reports. Until 1983 two sampling frames were used; in England, Northern Ireland and Wales, the Valuation Roll provided the basis for a sample which, in England and Wales, included all 69 metropolitan districts, and a two-stage selection from among the remaining non-metropolitan districts. In Northern Ireland wards were the primary sampling units. In Scotland, the Address File (i.e. post codes) was used as the basis for a stratified sample.From 1983 the Postoffice Address File has been used instead of the Valuation Roll in England and Wales. In 1984 sample rotation was introduced along with a panel element, the quarterly survey, which uses a two-stage clustered sample design.

The sample comprises about 90,000 addresses drawn at random from the rating lists in 190 different areas of England and Wales With such a large sample, it Will happen by chance that a small number of addresses which were selected at random for the 1979 survey Will come up again In addition 2,000 addresses in 8 of the areas selected in 1979 have been deliberately re-selected again this time (me Interviewers who get these addresses In their work w,ll receive a special letter to take with them.)

The sample is drawn from the "small users" sub-file of the Postcode Address File (PAF), which is a list of all addresses (delivery points) to which mail is delivered, prepared by the Post OffIce and held on computer. "Small users" are delivery points that receive less than 25 afiicles of mail a day and include all but a small proportion of private households. The PAF is updated regularly by the Post Office but, as mentioned in Chapter 1, there was an interruption in the supply of updates in the period leading up to the 1988 msurvey. As a result one third of the sample was drawn from the PAF as at March 1986 and two thirds from the sample as at September 1986. Although the PAF includes newly built properties ahead of their actual occupation, the 1988 sample does seem to have been light in the most recently built properties. The 1991 sample was drawn from the PAF as at May 1990 and should include most newly built houses.

Sample sizes and response rates Numbers of households who answered the questions in the Housing. Trailer were 37,175 in 1991. The corresponding response rates were 81.9 percent. Response rates were highest in East Anglia with nearly 87 percent in 1991, lowest in Inner London with only 66 percent in 1991.

Sampling deviation

One of the limitations of the LFS is that the sample design provides no guarantee of adequate coverage of any industry, as the survey is not industrially stratified. The LFS coverage also omits communal establishments, except NHS housing, students in halls of residence and at boarding schools. Members of the armed forces are only included if they live in private accommodation. Also, workers under 16 are not covered. As in previous years, the sample for the boost survey was drawn in a single stage in the most densely populated areas, in two stages elsewhere. The areas where the sample was drawn in a single stage were:

(I) local authority districts in the metropolitan counties and Greater London; (II) districts which, based on the 1981 Census.

Mode of data collection

Face-to-face [f2f]

Research instrument

All questions in the specification are laid out using the same format. Some questions (for instance USUWRKM) have a main group routed to them, but subsets of this group are asked variations of the question. In such cases the main routing is at the foot of the question as usual, and the subsets are listed separately above it, with the individual aspect of the routing indented slightly from the left of the page.

Cleaning operations

Information Technology Centres provides one-year training and practical work experience course in the use of computers and word processors and other aspects of information technology (eg teletex, editing, computer maintenance).

Response rate

The response rate achieved averaged between 79 percent. The method of calculating response rates is the following: The response rate indicates how many interviews were achieved as a proportion of those eligible for the survey. The formula used is as follows: RR = (FR + PR)/(FR + PR + OR + CR + RHQ + NC + RRI*) where RR = response rate, FR = full response, PR = partial response, OR = outright refusal, CR = circumstantial refusal, RHQ = refusal to HQ, NC = non contact, RRI = refusal to re-interview, *applies to waves two to five only.

Sampling error estimates

As with any sample survey, the results of the Labour Force Survey are subject to sampling errors. In addition, the results of any sample survey are affected by non-sampling errors, i.e. the whole variety of errors other then those due to sampling.

Data appraisal

Day of birth and date of birth variables have been removed from the annual LFS datasets, in the same way that they have been removed from the quarterly LFS datasets from 1992 onwards, as this information is now considered to be disclosive. The variable AGEDFE (age at proceeding 31 August) has been added to all annual datasets.

A dataset listing New Mexico cities by population for 2024.

This report presents findings from the third (wave 3) in a series of follow up reports to the 2017 Mental Health of Children and Young People (MHCYP) survey, conducted in 2022. The sample includes 2,866 of the children and young people who took part in the MHCYP 2017 survey. The mental health of children and young people aged 7 to 24 years living in England in 2022 is examined, as well as their household circumstances, and their experiences of education, employment and services and of life in their families and communities. Comparisons are made with 2017, 2020 (wave 1) and 2021 (wave 2), where possible, to monitor changes over time.

While the standard image of the nuclear family with two parents and 2.5 children has persisted in the American imagination, the number of births in the U.S. has steadily been decreasing since 1990, with about 3.6 million babies born in 2023. In 1990, this figure was 4.16 million. Birth and replacement rates A country’s birth rate is defined as the number of live births per 1,000 inhabitants, and it is this particularly important number that has been decreasing over the past few decades. The declining birth rate is not solely an American problem, with EU member states showing comparable rates to the U.S. Additionally, each country has what is called a “replacement rate.” The replacement rate is the rate of fertility needed to keep a population stable when compared with the death rate. In the U.S., the fertility rate needed to keep the population stable is around 2.1 children per woman, but this figure was at 1.67 in 2022. Falling birth rates Currently, there is much discussion as to what exactly is causing the birth rate to decrease in the United States. There seem to be several factors in play, including longer life expectancies, financial concerns (such as the economic crisis of 2008), and an increased focus on careers, all of which are causing people to wait longer to start a family. How international governments will handle falling populations remains to be seen, but what is clear is that the declining birth rate is a multifaceted problem without an easy solution.

Approximately **** percent of the United States' population accessed the internet as of October 2025, which has been consistent since 2023. The United States is one of the biggest online markets worldwide. Social media usage in the U.S. Social media usage in the United States has seen considerable growth in recent years, with forecasted users reaching as many as *** million in 2029. By the third quarter of 2024, internet users in the U.S. were spending around *** hours on social media out of seven hours of internet usage. The most common activities among U.S. users include sending private messages and liking posts or following people, which highlights widespread engagement with social media platforms among internet users in the United States. TikTok surge in the U.S. TikTok continues to be one of the most popular social media platforms in the United States. As of October 2025, the U.S. was the next biggest TikTok advertising audience, after Indonesia. This rise in popularity is the result of users's high engagement with short-form videos and quick entertainment, in which TikTok managed to capture users’ attention. In fact, each user in the United States spent over ** hours per month 2023.

In 1800, the region of Germany was not a single, unified nation, but a collection of decentralized, independent states, bound together as part of the Holy Roman Empire. This empire was dissolved, however, in 1806, during the Revolutionary and Napoleonic eras in Europe, and the German Confederation was established in 1815. Napoleonic reforms led to the abolition of serfdom, extension of voting rights to property-owners, and an overall increase in living standards. The population grew throughout the remainder of the century, as improvements in sanitation and medicine (namely, mandatory vaccination policies) saw child mortality rates fall in later decades. As Germany industrialized and the economy grew, so too did the argument for nationhood; calls for pan-Germanism (the unification of all German-speaking lands) grew more popular among the lower classes in the mid-1800s, especially following the revolutions of 1948-49. In contrast, industrialization and poor harvests also saw high unemployment in rural regions, which led to waves of mass migration, particularly to the U.S.. In 1886, the Austro-Prussian War united northern Germany under a new Confederation, while the remaining German states (excluding Austria and Switzerland) joined following the Franco-Prussian War in 1871; this established the German Empire, under the Prussian leadership of Emperor Wilhelm I and Chancellor Otto von Bismarck. 1871 to 1945 - Unification to the Second World War The first decades of unification saw Germany rise to become one of Europe's strongest and most advanced nations, and challenge other world powers on an international scale, establishing colonies in Africa and the Pacific. These endeavors were cut short, however, when the Austro-Hungarian heir apparent was assassinated in Sarajevo; Germany promised a "blank check" of support for Austria's retaliation, who subsequently declared war on Serbia and set the First World War in motion. Viewed as the strongest of the Central Powers, Germany mobilized over 11 million men throughout the war, and its army fought in all theaters. As the war progressed, both the military and civilian populations grew increasingly weakened due to malnutrition, as Germany's resources became stretched. By the war's end in 1918, Germany suffered over 2 million civilian and military deaths due to conflict, and several hundred thousand more during the accompanying influenza pandemic. Mass displacement and the restructuring of Europe's borders through the Treaty of Versailles saw the population drop by several million more.

Reparations and economic mismanagement also financially crippled Germany and led to bitter indignation among many Germans in the interwar period; something that was exploited by Adolf Hitler on his rise to power. Reckless printing of money caused hyperinflation in 1923, when the currency became so worthless that basic items were priced at trillions of Marks; the introduction of the Rentenmark then stabilized the economy before the Great Depression of 1929 sent it back into dramatic decline. When Hitler became Chancellor of Germany in 1933, the Nazi government disregarded the Treaty of Versailles' restrictions and Germany rose once more to become an emerging superpower. Hitler's desire for territorial expansion into eastern Europe and the creation of an ethnically-homogenous German empire then led to the invasion of Poland in 1939, which is considered the beginning of the Second World War in Europe. Again, almost every aspect of German life contributed to the war effort, and more than 13 million men were mobilized. After six years of war, and over seven million German deaths, the Axis powers were defeated and Germany was divided into four zones administered by France, the Soviet Union, the UK, and the U.S.. Mass displacement, shifting borders, and the relocation of peoples based on ethnicity also greatly affected the population during this time. 1945 to 2020 - Partition and Reunification In the late 1940s, cold war tensions led to two distinct states emerging in Germany; the Soviet-controlled east became the communist German Democratic Republic (DDR), and the three western zones merged to form the democratic Federal Republic of Germany. Additionally, Berlin was split in a similar fashion, although its location deep inside DDR territory created series of problems and opportunities for the those on either side. Life quickly changed depending on which side of the border one lived. Within a decade, rapid economic recovery saw West Germany become western Europe's strongest economy and a key international player. In the east, living standards were much lower, although unemployment was almost non-existent; internationally, East Germany was the strongest economy in the Eastern Bloc (after the USSR), though it eventually fell behind the West by the 1970s. The restriction of movement between the two states also led to labor shortages in t...

In 2023, there were approximately 750.5 deaths by all causes per 100,000 inhabitants in the United States. This statistic shows the death rate for all causes in the United States between 1950 and 2023. Causes of death in the U.S. Over the past decades, chronic conditions and non-communicable diseases have come to the forefront of health concerns and have contributed to major causes of death all over the globe. In 2022, the leading cause of death in the U.S. was heart disease, followed by cancer. However, the death rates for both heart disease and cancer have decreased in the U.S. over the past two decades. On the other hand, the number of deaths due to Alzheimer’s disease – which is strongly linked to cardiovascular disease- has increased by almost 141 percent between 2000 and 2021. Risk and lifestyle factors Lifestyle factors play a major role in cardiovascular health and the development of various diseases and conditions. Modifiable lifestyle factors that are known to reduce risk of both cancer and cardiovascular disease among people of all ages include smoking cessation, maintaining a healthy diet, and exercising regularly. An estimated two million new cases of cancer in the U.S. are expected in 2025.

The world population surpassed eight billion people in 2022, having doubled from its figure less than 50 years previously. Looking forward, it is projected that the world population will reach nine billion in 2038, and 10 billion in 2060, but it will peak around 10.3 billion in the 2080s before it then goes into decline. Regional variations The global population has seen rapid growth since the early 1800s, due to advances in areas such as food production, healthcare, water safety, education, and infrastructure, however, these changes did not occur at a uniform time or pace across the world. Broadly speaking, the first regions to undergo their demographic transitions were Europe, North America, and Oceania, followed by Latin America and Asia (although Asia's development saw the greatest variation due to its size), while Africa was the last continent to undergo this transformation. Because of these differences, many so-called "advanced" countries are now experiencing population decline, particularly in Europe and East Asia, while the fastest population growth rates are found in Sub-Saharan Africa. In fact, the roughly two billion difference in population between now and the 2080s' peak will be found in Sub-Saharan Africa, which will rise from 1.2 billion to 3.2 billion in this time (although populations in other continents will also fluctuate). Changing projections The United Nations releases their World Population Prospects report every 1-2 years, and this is widely considered the foremost demographic dataset in the world. However, recent years have seen a notable decline in projections when the global population will peak, and at what number. Previous reports in the 2010s had suggested a peak of over 11 billion people, and that population growth would continue into the 2100s, however a sooner and shorter peak is now projected. Reasons for this include a more rapid population decline in East Asia and Europe, particularly China, as well as a prolonged development arc in Sub-Saharan Africa.

The statistic shows the total population of India from 2020 to 2030. In 2024, the estimated total population in India amounted to approximately 1.44 billion people. Total population in India India currently has the second-largest population in the world and is projected to overtake top-ranking China within forty years. Its residents comprise more than one-seventh of the entire world’s population, and despite a slowly decreasing fertility rate (which still exceeds the replacement rate and keeps the median age of the population relatively low), an increasing life expectancy adds to an expanding population. In comparison with other countries whose populations are decreasing, such as Japan, India has a relatively small share of aged population, which indicates the probability of lower death rates and higher retention of the existing population. With a land mass of less than half that of the United States and a population almost four times greater, India has recognized potential problems of its growing population. Government attempts to implement family planning programs have achieved varying degrees of success. Initiatives such as sterilization programs in the 1970s have been blamed for creating general antipathy to family planning, but the combined efforts of various family planning and contraception programs have helped halve fertility rates since the 1960s. The population growth rate has correspondingly shrunk as well, but has not yet reached less than one percent growth per year. As home to thousands of ethnic groups, hundreds of languages, and numerous religions, a cohesive and broadly-supported effort to reduce population growth is difficult to create. Despite that, India is one country to watch in coming years. It is also a growing economic power; among other measures, its GDP per capita was expected to triple between 2003 and 2013 and was listed as the third-ranked country for its share of the global gross domestic product.