The National Geologic Map Database (NGMDB) is a Congressionally mandated national archive of geoscience maps, reports, and stratigraphic information. The Geologic Mapping Act of 1992 and its Reauthorizations calls for the U.S. Geological Survey and the Association of American State Geologists (AASG) to cooperatively build this national archive, according to technical and scientific standards whose development is coordinated by the NGMDB. The NGMDB consists of a comprehensive set of publication citations, stratigraphic nomenclature, downloadable content in raster and vector formats, unpublished source information, and guidance on standards development. The NGMDB contains information on more than 110,000 maps and related geoscience reports published from the early 1800s to the present day, by more than 630 agencies, universities, associations, and private companies.

The State Geologic Map Compilation (SGMC) geodatabase of the conterminous United States (https://doi.org/10.5066/F7WH2N65) represents a seamless, spatial database of 48 State geologic maps that range from 1:50,000 to 1:1,000,000 scale. A national digital geologic map database is essential in interpreting other datasets that support numerous types of national-scale studies and assessments, such as those that provide geochemistry, remote sensing, or geophysical data. The SGMC is a compilation of the individual U.S. Geological Survey releases of the Preliminary Integrated Geologic Map Databases for the United States. The SGMC geodatabase also contains updated data for seven States and seven entirely new State geologic maps that have been added since the preliminary databases were published. Numerous errors have been corrected and enhancements added to the preliminary datasets using thorough quality assurance/quality control procedures. The SGMC is not a truly integrated geologic map database because geologic units have not been reconciled across State boundaries. However, the geologic data contained in each State geologic map have been standardized to allow spatial analyses of lithology, age, and stratigraphy at a national scale. A full discussion of the procedures and methodology used to create this dataset is available in the accompanying report: Horton, J.D., San Juan, C.A., and Stoeser, D.B, 2017, The State Geologic Map Compilation (SGMC) geodatabase of the conterminous United States (ver. 1.1, August 2017): U.S. Geological Survey Data Series 1052, 46 p., https://doi.org/10.3133/ds1052.

State Geologic Map CompilationThis web map portrays the U.S. Geological Survey's (USGS) State Geologic Map Compilation (SGMC) geodatabase of the conterminous United States. The SGMC represents a seamless, spatial database of 48 State geologic maps. Per USGS, "A national digital geologic map database is essential in interpreting other datasets that support numerous types of national-scale studies and assessments, such as those that provide geochemistry, remote sensing, or geophysical data. The SGMC is a compilation of the individual USGS releases of the Preliminary Integrated Geologic Map Databases for the U.S."A full discussion of the procedures and methodology used to create this dataset is available in the accompanying report: Horton, J.D., San Juan, C.A., and Stoeser, D.B, 2017, The State Geologic Map Compilation (SGMC) geodatabase of the conterminous United States (ver. 1.1, August 2017): U.S. Geological Survey Data Series 1052, 46p.State Geologic Map CollectionData currency and source: See individual layers listed below.For more information: The State Geologic Map Compilation (SGMC) Geodatabase of the Conterminous United States For feedback please contact: ArcGIScomNationalMaps@esri.comLayers:State Geologic Map Compilation – PointsState Geologic Map Compilation – StructureState Geologic Map Compilation – GeologyState Geologic Map Compilation - Vector TilesU.S. Geological SurveyPer USGS, "The USGS provides science about the natural hazards that threaten lives and livelihoods; the water, energy, minerals, and other natural resources we rely on; the health of our ecosystems and environment; and the impacts of climate and land-use change."

This U.S. Geological Survey (USGS) data release provides a digital geospatial database for the geologic map of the White Rock Canyon quadrangle, Carbon County, Wyoming (Hyden and others, 1968). Attribute tables and geospatial features (points, lines and polygons) conform to the Geologic Map Schema (USGS NCGMP, 2020) and represent the geologic map as published in USGS Geologic Quadrangle Map GQ-789. The 35,758-acre map area represents the geology at a publication scale of 1:24,000.

References: Hyden, H.J., Houston, R.S., and King, J.S., 1968, Geologic map of the White Rock Canyon quadrangle, Carbon County, Wyoming: U.S. Geological Survey, Geologic Quadrangle Map GQ-789, scale 1:24,000, https://doi.org/10.3133/gq789.

U.S. Geological Survey National Cooperative Geologic Mapping Program, 2020, GeMS (Geologic Map Schema) - A standard format for the digital publication of geologic maps: U.S. Geological Survey Techniques and Methods, book 11, chap. B10, 74 p., https://doi.org//10.3133 ...

This dataset consists of cartographic data in digital line graph (DLG) form for the northeastern states (Connecticut, Maine, Massachusetts, New Hampshire, New York, Rhode Island and Vermont). Information is presented on two planimetric base categories, political boundaries and administrative boundaries, each available in two formats: the topologically structured format and a simpler format optimized for graphic display. These DGL data can be used to plot base maps and for various kinds of spatial analysis. They may also be combined with other geographically referenced data to facilitate analysis, for example the Geographic Names Information System.

USGS Structures from The National Map (TNM) consists of data to include the name, function, location, and other core information and characteristics of selected manmade facilities across all US states and territories. The types of structures collected are largely determined by the needs of disaster planning and emergency response, and homeland security organizations. Structures currently included are: School, School:Elementary, School:Middle, School:High, College/University, Technical/Trade School, Ambulance Service, Fire Station/EMS Station, Law Enforcement, Prison/Correctional Facility, Post Office, Hospital/Medical Center, Cabin, Campground, Cemetery, Historic Site/Point of Interest, Picnic Area, Trailhead, Vistor/Information Center, US Capitol, State Capitol, US Supreme Court, State Supreme Court, Court House, Headquarters, Ranger Station, White House, and City/Town Hall. Structures data are designed to be used in general mapping and in the analysis of structure related activities using geographic information system technology. Included is a feature class of preliminary building polygons provided by FEMA, USA Structures. The National Map structures data is commonly combined with other data themes, such as boundaries, elevation, hydrography, and transportation, to produce general reference base maps. The National Map viewer allows free downloads of public domain structures data in either Esri File Geodatabase or Shapefile formats. For additional information on the structures data model, go to https://www.usgs.gov/ngp-standards-and-specifications/national-map-structures-content.

The USGS National Cooperative Geologic Mapping Program (NCGMP) was directed by Congress to create a new geologic map of the United States” by “bring[ing] together detailed national and continental-resolution 2D and 3D information produced throughout the Survey and by federal and state partners” (House Report 116-100). To fulfill this goal, the NCGMP created a map synthesis engine (Johnstone and others, 2025) based on the Geologic Map Schema (GeMS) standard (NCGMP, 2020) and used it to bring together source geologic maps originally published by the USGS and State Geological Surveys. This thematic map layer was derived from this database using procedures described by Johnstone and others (2025) and is intended to serve as a legible national map of ...

This report describes the digital representation of the Washington state geologic map (Hunting and others, 1961). This report contains an explanation of why the data were prepared, a desctiption of the digital data, and information on obtaining the digital files. This report is one in a series of digital maps, data files, and reports generated by the US Geological Survey to provide geologic process and mineral resource information to the Interior Columbia Basin Ecosystem Management Project (ICBEMP). The various digital maps and data files are being used in a GIS-based ecosystem assessment including an analysis of diverse questions relating to past, present, and future conditions within the general area of the Columbia River Basin east of the Cascade Mountains.

This data set is a series of polygons denoting the geologic units mapped in USGS Publication MF-1790, "Geologic Map of the Late Cenozoic Deposits of the Sacramento Valley and Northern Sierran Foothills, California" (Helley and Harwood,1985). This data set was created by scanning the five- original sheets from USGS Publication MF-1790 (Helley and Harwood, 1985), the five sheets were georeferenced individually and the geologic information was digitized using AutoCAD 2006. The accuracy of the digitized lines was deemed to be within acceptable error tolerances, with the digitized lines accurately matching the original drafted lines in USGS Publication MF-1790 (Helley and Harwood, 1985). In general, the width of the contact lines on the paper copy, accounting for scale, ranged up to about 20 meters (66 feet). During the original digitization, minor topological mistakes (such as identical rock units on both sides of a lithologic contact or unclosed polygons) and omissions (such as unidentified lithologic units) were applied according to the best available knowledge. Comparisons were made between the original mylar and colorized field sheets (as available), in addition to the Geologic Map of the Battle Creek Fault Zone, Northern Sacramento Valley, California (USGS Map MF-1298, 1981), the Geologic Map of the Chico Monocline and Northeastern Part of the Sacramento Valley, California (USGS Miscellaneous Investigations Series Map I-1238, 1981), the Geologic Map of the Red Bluff 30' X 60' Quadrangle, California (USGS Geologic Investigation Series Map I-2542, 1995), and the Geologic Map of the Whitmore Quadrangle, California (Geologic Quadrangle Map GQ-993) . The correlation and description of geologic units were excerpted from USGS Publication MF-1790m (Helley and Harwood, 1985).

This U.S. Geological Survey (USGS) data release for the geologic map of the Arlington quadrangle, Carbon County, Wyoming, is a Geologic Map Schema (GeMS, 2020)-compliant version of the printed geologic map published in USGS Geologic Map Quadrangle GQ-643 (Hyden and others, 1967). The database represents the geology for the 35,776-acre map plate at a publication scale of 1:24,000. References: Hyden, H.J., King, J.S., and Houston, R.S., 1967, Geologic map of the Arlington quadrangle, Carbon County, Wyoming: U.S. Geological Survey, Geologic Quadrangle Map GQ-643, scale 1:24,000; https://doi.org/10.3133/gq643. U.S. Geological Survey National Cooperative Geologic Mapping Program, 2020, GeMS (Geologic Map Schema) - A standard format for the digital publication of geologic maps: U.S. Geological Survey Techniques and Methods, book 11, chap. B10, 74 p., https://doi.org//10.3133/tm11B10.

This data set is a series of polylines denoting the symbology for landslides; generally showing direction of movement downhill. These features were added to the landslide deposits mapped in USGS Publication MF-1790, "Geologic Map of the Late Cenozoic Deposits of the Sacramento Valley and Northern Sierran Foothills, California" (Helley and Harwood,1985). This data set was created by scanning the five- original sheets from USGS Publication MF-1790 (Helley and Harwood, 1985), the five sheets were georeferenced individually and the geologic information was digitized using AutoCAD 2006. The accuracy of the digitized lines was deemed to be within acceptable error tolerances, with the digitized lines accurately matching the original drafted lines in USGS Publication MF-1790 (Helley and Harwood, 1985). In general, the width of the contact lines on the paper copy, accounting for scale, ranged up to about 20 meters (66 feet). During the original digitization, minor topological mistakes (such as identical rock units on both sides of a lithologic contact or unclosed polygons) and omissions (such as unidentified lithologic units) were applied according to the best available knowledge. Comparisons were made between the original mylar and colorized field sheets (as available), in addition to the Geologic Map of the Battle Creek Fault Zone, Northern Sacramento Valley, California (USGS Map MF-1298, 1981), the Geologic Map of the Chico Monocline and Northeastern Part of the Sacramento Valley, California (USGS Miscellaneous Investigations Series Map I-1238, 1981), and the Geologic Map of the Red Bluff 30' X 60' Quadrangle, California (USGS Geologic Investigation Series Map I-2542, 1995). The correlation and description of geologic units were excerpted from USGS Publication MF-1790m (Helley and Harwood, 1985).

These data are part of a larger USGS project to develop an updated geospatial database of mines, mineral deposits and mineral regions in the United States. Mine and prospect-related symbols, such as those used to represent prospect pits, mines, adits, dumps, tailings, etc., hereafter referred to as “mine” symbols or features, are currently being digitized on a state-by-state basis from the 7.5-minute (1:24, 000-scale) and the 15-minute (1:48, 000 and 1:62,500-scale) archive of the USGS Historical Topographic Maps Collection, or acquired from available databases (California and Nevada, 1:24,000-scale only). Compilation of these features is the first phase in capturing accurate locations and general information about features related to mineral resource exploration and extraction across the U.S. To date, the compilation of 400,000-plus point and polygon mine symbols from approximately 51,000 maps of 17 western states (AZ, CA, CO, ID, KS, MT, ND, NE, NM, NV, OK, OR, SD, UT, WA, WY and western TX) has been completed. The process renders not only a more complete picture of exploration and mining in the western U.S., but an approximate time line of when these activities occurred. The data may be used for land use planning, assessing abandoned mine lands and mine-related environmental impacts, assessing the value of mineral resources from Federal, State and private lands, and mapping mineralized areas and systems for input into the land management process. The data are presented as three groups of layers based on the scale of the source maps. No reconciliation between the data groups was done.

ArcGIS Online web map that is used in the U.S. Quaternary Faults Web Application This web map is not intended to be viewed or used alone

This dataset is intended to provide seamless, integrated, surficial geologic mapping of the U.S. Intermountain West region and is supported by the National Cooperative Geologic Mapping Program of the U.S. Geological Survey. Surficial geology included as part of this data release as independent of bedrock geologic mapping and is compiled at a variable resolution from 1:50,000 to 1:250,000 scale. No original interpretations are presented in this dataset; rather, all interpretive data are assimilated from referenceable publications. Initial contributions to this data release are along an east-west transect that parallels 37-degrees north latitude extending from the Rio Grande Rift and Great Plains in the east to the Basin and Range and Sierra Nevada to the west. Other areas of the Intermountain West region will be incorporated over time. Data are presented as a downloadable file geodatabase (*.gdb) and as features services that can be directly ingested into GIS software for analysis. This dataset is intended to be versioned regularly as new geologic map data is integrated. The data structure follows the Seamless Integrated Geologic Mapping extension (SIGMa) (Turner and others, 2022) to the Geologic Map Schema (GeMS) (USGS, 2020). U.S. Geological Survey National Cooperative Geologic Mapping Program, 2020, GeMS (Geologic Map Schema)—A standard format for the digital publication of geologic maps: U.S. Geological Survey Techniques and Methods, book 11, chap. B10, 74 p., https://doi.org/10.3133/tm11B10. Turner, K.J., Workman, J.B., Colgan, J.P., Gilmer, A.K., Berry, M.E., Johnstone, S.A., Warrell, K.F., Dechesne, M., VanSistine, D.P., Thompson, R.A., Hudson, A.M., Zellman, K.L., Sweetkind, D., and Ruleman, C.A., 2022, The Seamless Integrated Geologic Mapping (SIGMa) extension to the Geologic Map Schema (GeMS): U.S. Geological Survey Scientific Investigations Report 2022–5115, 33 p., https://doi.org/10.3133/ sir20225115.

Under the direction and funding of the National Cooperative Geologic Mapping Program (NCGMP) with guidance and encouragement from the United States Geological Survey (USGS), there has been a decadal strategic plan in place to call for geologic mapping across the nation. This call has been increasing the need for digital data that has not yet been made available. With such a demand, physical data is being re-released as vector-based, GIS operable data, which is viable as a corporate asset to the USGS. This collection of reports is part of the compilation and synthesis efforts hampered by the distributed nature of subsurface investigations at the USGS and a general lack of cataloging and archiving of 3-D geological models and subsurface products. Subsurface mapping activities are decentralized and the results are released on a project-by-project basis. This has led to repeats in data being created, thus wasting both time and energy of the end users. Having a clear understanding of what data is available for GIS use is paramount in the mapping groups. As digital collections of data continue, data releases like this will not be uncommon. This release features structure contour, isopach, and thickness data of stratigraphic units as well as chronostratigraphy. Units included in this release span from North Dakota to as far south as New Mexico and are as follows: San Andres Limestone, Glorieta Sandstone, Leadville Limestone, Cutler Group, Morrison Formation, Colorado Shale, Fox Hills Sandstone, Goose Egg Formation, Minnelusa Formation, Mowry Shale, Pierre Shale, Sundance Formation Unconformity, Wasatch Formation, Permian age units, Trout Creek Sandstone, Castlegate Sandstone, Exshaw or Kinderhook Black Shale, San Juan Volcanics, Lewis Shale, Almond Formation, Baxter Shale, Dakota Sandstone, Cretaceous Onlap, and Tensleep Sandstone.

Banner

https://www.googleapis.com/download/storage/v1/b/kaggle-user-content/o/inbox%2F1842206%2F0999883b606facd5ffe7e432605fda1f%2F_73a6c8d5-2253-47d4-b5a3-e36dc4438885.jpeg?generation=1760455002784861&alt=media" alt="">

What is USGS?

The United States Geological Survey (USGS), founded as the Geological Survey, is an agency of the United States Department of the Interior whose work spans the disciplines of biology, geography, geology, and hydrology. The agency was founded on March 3, 1879, to study the landscape of the United States, its natural resources, and the natural hazards that threaten it. The agency also makes maps of planets and moons, based on data from U.S. space probes.

USGS on Youtube

1964 Quake: The Great Alaska Earthquake

https://www.youtube.com/watch?v=lE2j10xyOgI" alt="1964 Quake: The Great Alaska Earthquake">

Data Source

look at "query" in https://earthquake.usgs.gov/fdsnws/event/1/

Data Dictionary

• https://earthquake.usgs.gov/data/comcat/index.php
• https://earthquake.usgs.gov/earthquakes/feed/v1.0/geojson.php
• https://earthquake.usgs.gov/earthquakes/feed/v1.0/geojson_detail.php

Missing Data

According to USGS

We may not rapidly locate earthquakes smaller than 5.0 outside the U.S. unless they have caused significant damage or are widely felt. Earthquakes this small rarely cause significant damage. At times, some other agency may report an earthquake with a larger magnitude than what we compute from our data, especially for non-U.S. events near magnitude 5.0. If our magnitude for the event is less than magnitude 5.0, we may not issue a rapid report for it.

About Missing Data

Image

Generated with Bing Image Generator

A digital version of the Geologic Map of the United States, originally published at a scale of 1:2,500,000 (King and Beikman, 1974b). It excludes Alaska and Hawaii.

Source: http://tin.er.usgs.gov/geology/us/

The USGS Transportation service from The National Map (TNM) is based on TIGER/Line data provided through U.S. Census Bureau and road data from U.S. Forest Service. Some of the TIGER/Line data includes limited corrections done by USGS. Transportation data consists of roads, railroads, trails, airports, and other features associated with the transport of people or commerce. The data include the name or route designator, classification, and location. Transportation data support general mapping and geographic information system technology analysis for applications such as traffic safety, congestion mitigation, disaster planning, and emergency response. The National Map transportation data is commonly combined with other data themes, such as boundaries, elevation, hydrography, and structures, to produce general reference base maps. The National Map Download Client allows free downloads of public domain transportation data in either Esri File Geodatabase or Shapefile formats. For additional information on the transportation data model, go to https://nationalmap.gov/transport.html.

The U.S. Geological Survey has conducted geologic mapping to characterize the sea floor offshore of Massachusetts. The mapping was carried out using a Simrad Subsea EM 1000 Multibeam Echo Sounder on the Frederick G. Creed on four cruises conducted between 1994 and 1998. The mapping was conducted in cooperation with the National Oceanic and Atmospheric Administration (NOAA) and with support from the Canadian Hydrographic Service and the University of New Brunswick.

The long-term goal of this mapping effort is to produce high-resolution geologic maps and a Geographic Information System (GIS) project that presents images and grids of bathymetry, shaded relief bathymetry, and backscatter intensity data from these surveys that will serve the needs of research, management and the public.

The data presented here have been published on paper maps of Quadrangle 2 in western Massachusetts Bay at a scale of 1:25,000 (USGS Map I-2731A, B and C).

The USGS Governmental Unit Boundaries service from The National Map (TNM) represents major civil areas for the Nation, including States or Territories, counties (or equivalents), Federal and Native American areas, congressional districts, minor civil divisions, incorporated places (such as cities and towns), and unincorporated places. Boundaries data are useful for understanding the extent of jurisdictional or administrative areas for a wide range of applications, including mapping or managing resources, and responding to natural disasters. Boundaries data also include extents of forest, grassland, park, wilderness, wildlife, and other reserve areas useful for recreational activities, such as hiking and backpacking. Boundaries data are acquired from a variety of government sources. The data represents the source data with minimal editing or review by USGS. Please refer to the feature-level metadata for information on the data source. The National Map boundaries data is commonly combined with other data themes, such as elevation, hydrography, structures, and transportation, to produce general reference base maps. The National Map viewer allows free downloads of public domain boundaries data in either Esri File Geodatabase or Shapefile formats. For additional information on the boundaries data model, go to https://nationalmap.gov/boundaries.html.