In terms of population size, the sex ratio in the United States favors females, although the gender gap is remaining stable. In 2010, there were around 5.17 million more women, with the difference projected to decrease to around 3 million by 2027.
Gender ratios by U.S. state In the United States, the resident population was estimated to be around 331.89 million in 2021. The gender distribution of the nation has remained steady for several years, with women accounting for approximately 51.1 percent of the population since 2013. Females outnumbered males in the majority of states across the country in 2020, and there were eleven states where the gender ratio favored men.
Metro areas by population National differences between male and female populations can also be analyzed by metropolitan areas. In general, a metropolitan area is a region with a main city at its center and adjacent communities that are all connected by social and economic factors. The largest metro areas in the U.S. are New York, Los Angeles, and Chicago. In 2019, there were more women than men in all three of those areas, but Jackson, Missouri was the metro area with the highest share of female population.
This web map indicates the annual compound rate of total population change in the United States from 2000 to 2010. Total Population is the total number of residents in an area. Residence refers to the "usual place" where a person lives. Total Population for 2000 is from the U.S. Census 2000. The 2010 Total Population variable is estimated by Esri's proven annual demographic update methodology that blends GIS with statistical technology and a unique combination of data sources.The map is symbolized so that you can easily distinguish areas of population growth (i.e. shades of green) from areas of population decline (i.e. shades of red). It uses a 3 D effect to further emphasize those trends. The map reveals interesting patterns of recent population change in various regions and communities across the United States.The map shows population change at the County and Census Tract levels. The geography depicts Counties at 25m to 750k scale, Census Tracts at 750k to 100k scale.Esri's Updated Demographics (2010/2015) – Population, age, income, sex, race, marital status and other variables are among the variables included in the database. Each year, Esri's data development team employs its proven methodologies to update more than 2,000 demographic variables for a variety of geographies. See Updated Demographics for more information.
2010-2018; 2019. US Census Annual Estimates of the Resident Population for Selected Age Groups by Sex for the United States. The estimates for the 2010-2018 dataset are based on the 2010 Census and reflect changes to the April 1, 2010 population due to the Count Question Resolution program and geographic program revisions. Median age is calculated based on single year of age. The estimates for 2019 are based on a one-year dataset that was published on the US Census website in 2021. For population estimates methodology statements, see http://www.census.gov/popest/methodology/index.html.
2010-2018. US Census Annual Estimates of the Resident Population for Selected Age Groups by Sex for the United States. The estimates are based on the 2010 Census and reflect changes to the April 1, 2010 population due to the Count Question Resolution program and geographic program revisions. Median age is calculated based on single year of age. For population estimates methodology statements, see http://www.census.gov/popest/methodology/index.html.
https://www.icpsr.umich.edu/web/ICPSR/studies/34748/termshttps://www.icpsr.umich.edu/web/ICPSR/studies/34748/terms
The Demographic Profile Summary File contains 23 tables derived from the responses to the 2010 Census questionnaire, including tabulations of the population by age and sex, race, and Hispanic or Latino origin; household population by household relationship; group quarters population by sex and group quarters type; households by type; and housing units by occupancy and tenure. The Census Bureau computed the tables for multiple levels of observation (called "summary levels" in the Census Bureau's nomenclature), including, but not limited to, regions, divisions, states, metropolitan and micropolitan statistical areas, counties, county subdivisions, places, congressional districts, state legislative districts, school districts, American Indian Areas, Alaska Native Areas, Hawaiian Home Lands, ZIP code tabulation areas, and census tracts. Additionally, for some summary areas the tables are iterated for "geographic components," e.g., the urban and rural portions of metropolitan statistical areas and the portions of states inside and outside metropolitan statistical areas. With one variable per table cell and additional variables with geographic information, the Demographic Profile Summary File comprises 106 data files, two per state, the District of Columbia, Puerto Rico, and the National File. ICPSR supplies this data collection in 54 ZIP archives. There is a separate archive for each state, the District of Columbia, Puerto Rico and the National File, and an archive with a Microsoft Access database shell and instructions on how to use the shell.
Annual Resident Population Estimates by Age Group, Sex, Race, and Hispanic Origin; for the United States, States, Counties; and for Puerto Rico and its Municipios: April 1, 2010 to July 1, 2019 // Source: U.S. Census Bureau, Population Division // The contents of this file are released on a rolling basis from December through June. // Note: 'In combination' means in combination with one or more other races. The sum of the five race-in-combination groups adds to more than the total population because individuals may report more than one race. Hispanic origin is considered an ethnicity, not a race. Hispanics may be of any race. Responses of 'Some Other Race' from the 2010 Census are modified. This results in differences between the population for specific race categories shown for the 2010 Census population in this file versus those in the original 2010 Census data. The estimates are based on the 2010 Census and reflect changes to the April 1, 2010 population due to the Count Question Resolution program and geographic program revisions. // Current data on births, deaths, and migration are used to calculate population change since the 2010 Census. An annual time series of estimates is produced, beginning with the census and extending to the vintage year. The vintage year (e.g., Vintage 2019) refers to the final year of the time series. The reference date for all estimates is July 1, unless otherwise specified. With each new issue of estimates, the entire estimates series is revised. Additional information, including historical and intercensal estimates, evaluation estimates, demographic analysis, research papers, and methodology is available on website: https://www.census.gov/programs-surveys/popest.html.
In 2024, the United States had a resident population of around 340 million inhabitants. See figures for the total population by continent here.
Monthly Population Estimates by Universe, Age, Sex, Race, and Hispanic Origin for the United States: April 1, 2010 to December 1, 2018 // Source: U.S. Census Bureau, Population Division // The contents of this file are released on a rolling basis from December through June. // Note: 'In combination' means in combination with one or more other races. The sum of the five race-in-combination groups adds to more than the total population because individuals may report more than one race. Hispanic origin is considered an ethnicity, not a race. Hispanics may be of any race. Responses of 'Some Other Race' from the 2010 Census are modified. This results in differences between the population for specific race categories shown for the 2010 Census population in this file versus those in the original 2010 Census data. For more information, see https://www2.census.gov/programs-surveys/popest/technical-documentation/methodology/modified-race-summary-file-method/mrsf2010.pdf. // The estimates are based on the 2010 Census and reflect changes to the April 1, 2010 population due to the Count Question Resolution program and geographic program revisions. // Persons on active duty in the Armed Forces were not enumerated in the 2010 Census. Therefore, variables for the 2010 Census civilian, civilian noninstitutionalized, and resident population plus Armed Forces overseas populations cannot be derived and are not available on these files. // For detailed information about the methods used to create the population estimates, see https://www.census.gov/programs-surveys/popest/technical-documentation/methodology.html. // Each year, the Census Bureau's Population Estimates Program (PEP) utilizes current data on births, deaths, and migration to calculate population change since the most recent decennial census, and produces a time series of estimates of population. The annual time series of estimates begins with the most recent decennial census data and extends to the vintage year. The vintage year (e.g., V2017) refers to the final year of the time series. The reference date for all estimates is July 1, unless otherwise specified. With each new issue of estimates, the Census Bureau revises estimates for years back to the last census. As each vintage of estimates includes all years since the most recent decennial census, the latest vintage of data available supersedes all previously produced estimates for those dates. The Population Estimates Program provides additional information including historical and intercensal estimates, evaluation estimates, demographic analysis, and research papers on its website: https://www.census.gov/programs-surveys/popest.html.
This map shows the change in total population in the United States between the 2000 and 2010 Census. The change is represented by a percent change. Positive values show overall growth, which negative numbers show overall decline.The map shows this pattern for states, counties, tracts, and block groups. There is increasing geographic detail as you zoom in, and only one geography is configured to show at any time. The data source is the US Census Bureau, and the vintage is 2010. The original service and data metadata can be found here.
Annual Resident Population Estimates, Estimated Components of Resident Population Change, and Rates of the Components of Resident Population Change; for the United States, States, Metropolitan Statistical Areas, Micropolitan Statistical Areas, Counties, and Puerto Rico: April 1, 2010 to July 1, 2019 // Source: U.S. Census Bureau, Population Division // The contents of this file are released on a rolling basis from December through March. // Note: Total population change includes a residual. This residual represents the change in population that cannot be attributed to any specific demographic component. // Note: The estimates are based on the 2010 Census and reflect changes to the April 1, 2010 population due to the Count Question Resolution program and geographic program revisions. // The Office of Management and Budget's statistical area delineations for metropolitan, micropolitan, and combined statistical areas, as well as metropolitan divisions, are those issued by that agency in September 2018. // Current data on births, deaths, and migration are used to calculate population change since the 2010 Census. An annual time series of estimates is produced, beginning with the census and extending to the vintage year. The vintage year (e.g., Vintage 2019) refers to the final year of the time series. The reference date for all estimates is July 1, unless otherwise specified. With each new issue of estimates, the entire estimates series is revised. Additional information, including historical and intercensal estimates, evaluation estimates, demographic analysis, research papers, and methodology is available on website: https://www.census.gov/programs-surveys/popest.html.
https://www.icpsr.umich.edu/web/ICPSR/studies/33442/termshttps://www.icpsr.umich.edu/web/ICPSR/studies/33442/terms
This data collection contains summary statistics on population and housing subjects derived from questions on the 2010 Census questionnaire. Population counts for the total population and for the population 18 years and over are presented in four tables: (1) population of all ages by race, (2) population 18 years and over by race, (3) Hispanic or Latino population of all ages and not Hispanic or Latino population of all ages by race, and (4) Hispanic or Latino population ages 18 years and over and not Hispanic or Latino population ages 18 years and by race. A fifth table shows the number of occupied and vacant housing units. With one variable per table cell, plus additional variables with geographic information, the collection comprises three data files. The tables are tabulated for multiple levels of observation (called "summary levels" in the Census Bureau's nomenclature): the United States as whole, states, regions, divisions, and other geographic areas that cross state boundaries, such as American Indian areas, metropolitan statistical areas, and micropolitan statistical areas. Tabulations for within-state summary levels down to the block level are contained in a companion data collection, Census of Population and Housing, 2010 [United States]: Redistricting Data (Public Law 94-171) Summary File (ICPSR 33441). Two ZIP archives constitute the collection. The first archive contains the data files, while the second contains the codebook and other documentation files, a Microsoft Access database shell, and SAS setups.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
The total population in the United States was estimated at 341.2 million people in 2024, according to the latest census figures and projections from Trading Economics. This dataset provides - United States Population - actual values, historical data, forecast, chart, statistics, economic calendar and news.
In the past four centuries, the population of the United States has grown from a recorded 350 people around the Jamestown colony of Virginia in 1610, to an estimated 331 million people in 2020. The pre-colonization populations of the indigenous peoples of the Americas have proven difficult for historians to estimate, as their numbers decreased rapidly following the introduction of European diseases (namely smallpox, plague and influenza). Native Americans were also omitted from most censuses conducted before the twentieth century, therefore the actual population of what we now know as the United States would have been much higher than the official census data from before 1800, but it is unclear by how much. Population growth in the colonies throughout the eighteenth century has primarily been attributed to migration from the British Isles and the Transatlantic slave trade; however it is also difficult to assert the ethnic-makeup of the population in these years as accurate migration records were not kept until after the 1820s, at which point the importation of slaves had also been illegalized. Nineteenth century In the year 1800, it is estimated that the population across the present-day United States was around six million people, with the population in the 16 admitted states numbering at 5.3 million. Migration to the United States began to happen on a large scale in the mid-nineteenth century, with the first major waves coming from Ireland, Britain and Germany. In some aspects, this wave of mass migration balanced out the demographic impacts of the American Civil War, which was the deadliest war in U.S. history with approximately 620 thousand fatalities between 1861 and 1865. The civil war also resulted in the emancipation of around four million slaves across the south; many of whose ancestors would take part in the Great Northern Migration in the early 1900s, which saw around six million black Americans migrate away from the south in one of the largest demographic shifts in U.S. history. By the end of the nineteenth century, improvements in transport technology and increasing economic opportunities saw migration to the United States increase further, particularly from southern and Eastern Europe, and in the first decade of the 1900s the number of migrants to the U.S. exceeded one million people in some years. Twentieth and twenty-first century The U.S. population has grown steadily throughout the past 120 years, reaching one hundred million in the 1910s, two hundred million in the 1960s, and three hundred million in 2007. In the past century, the U.S. established itself as a global superpower, with the world's largest economy (by nominal GDP) and most powerful military. Involvement in foreign wars has resulted in over 620,000 further U.S. fatalities since the Civil War, and migration fell drastically during the World Wars and Great Depression; however the population continuously grew in these years as the total fertility rate remained above two births per woman, and life expectancy increased (except during the Spanish Flu pandemic of 1918).
Since the Second World War, Latin America has replaced Europe as the most common point of origin for migrants, with Hispanic populations growing rapidly across the south and border states. Because of this, the proportion of non-Hispanic whites, which has been the most dominant ethnicity in the U.S. since records began, has dropped more rapidly in recent decades. Ethnic minorities also have a much higher birth rate than non-Hispanic whites, further contributing to this decline, and the share of non-Hispanic whites is expected to fall below fifty percent of the U.S. population by the mid-2000s. In 2020, the United States has the third-largest population in the world (after China and India), and the population is expected to reach four hundred million in the 2050s.
In 2023, there were about 72.7 million Millennials estimated to be living in the United States, making them the largest generation group in the country. In comparison, there were 69.31 million Gen Z and 65.35 million Gen X estimated to be in the United States in that year.
https://creativecommons.org/publicdomain/zero/1.0/https://creativecommons.org/publicdomain/zero/1.0/
The United States Census is a decennial census mandated by Article I, Section 2 of the United States Constitution, which states: "Representatives and direct Taxes shall be apportioned among the several States ... according to their respective Numbers."
Source: https://en.wikipedia.org/wiki/United_States_Census
The United States census count (also known as the Decennial Census of Population and Housing) is a count of every resident of the US. The census occurs every 10 years and is conducted by the United States Census Bureau. Census data is publicly available through the census website, but much of the data is available in summarized data and graphs. The raw data is often difficult to obtain, is typically divided by region, and it must be processed and combined to provide information about the nation as a whole.
The United States census dataset includes nationwide population counts from the 2000 and 2010 censuses. Data is broken out by gender, age and location using zip code tabular areas (ZCTAs) and GEOIDs. ZCTAs are generalized representations of zip codes, and often, though not always, are the same as the zip code for an area. GEOIDs are numeric codes that uniquely identify all administrative, legal, and statistical geographic areas for which the Census Bureau tabulates data. GEOIDs are useful for correlating census data with other censuses and surveys.
Fork this kernel to get started.
https://bigquery.cloud.google.com/dataset/bigquery-public-data:census_bureau_usa
https://cloud.google.com/bigquery/public-data/us-census
Dataset Source: United States Census Bureau
Use: This dataset is publicly available for anyone to use under the following terms provided by the Dataset Source - http://www.data.gov/privacy-policy#data_policy - and is provided "AS IS" without any warranty, express or implied, from Google. Google disclaims all liability for any damages, direct or indirect, resulting from the use of the dataset.
Banner Photo by Steve Richey from Unsplash.
What are the ten most populous zip codes in the US in the 2010 census?
What are the top 10 zip codes that experienced the greatest change in population between the 2000 and 2010 censuses?
https://cloud.google.com/bigquery/images/census-population-map.png" alt="https://cloud.google.com/bigquery/images/census-population-map.png">
https://cloud.google.com/bigquery/images/census-population-map.png
This map shows the total population in the United States in 2010. This is shown by state, county, tract, and block group. The size of the circles represent the amount of people living within an area. The map shows this pattern for states, counties, tracts, and block groups. There is increasing geographic detail as you zoom in, and only one geography is configured to show at any time. The data source is the US Census Bureau, and the vintage is 2010. The original service and data metadata can be found here.
Annual State Resident Population Estimates for 6 Race Groups (5 Race Alone Groups and Two or More Races) by Age, Sex, and Hispanic Origin: April 1, 2010 to July 1, 2013 // File: 7/1/2013 State Characteristics Population Estimates // Source: U.S. Census Bureau, Population Division // Release Date: June 2014 // Note: The estimates are based on the 2010 Census and reflect changes to the April 1, 2010 population due to the Count Question Resolution program and geographic program revisions. Hispanic origin is considered an ethnicity, not a race. Hispanics may be of any race. Responses of 'Some Other Race' from the 2010 Census are modified. This results in differences between the population for specific race categories shown for the 2010 Census population in this file versus those in the original 2010 Census data. For more information, see http://www.census.gov/popest/data/historical/files/MRSF-01-US1.pdf. // For detailed information about the methods used to create the population estimates, see http://www.census.gov/popest/methodology/index.html. // Each year, the Census Bureau's Population Estimates Program (PEP) utilizes current data on births, deaths, and migration to calculate population change since the most recent decennial census, and produces a time series of estimates of population. The annual time series of estimates begins with the most recent decennial census data and extends to the vintage year. The vintage year (e.g., V2013) refers to the final year of the time series. The reference date for all estimates is July 1, unless otherwise specified. With each new issue of estimates, the Census Bureau revises estimates for years back to the last census. As each vintage of estimates includes all years since the most recent decennial census, the latest vintage of data available supersedes all previously produced estimates for those dates. The Population Estimates Program provides additional information including historical and intercensal estimates, evaluation estimates, demographic analysis, and research papers on its website: http://www.census.gov/popest/index.html.
The annual population growth in the United States increased by 0.1 percentage points (+27.03 percent) in 2023. In total, the population growth amounted to 0.49 percent in 2023. Population growth deals with the annual change in total population, and is affected by factors such as fertility, mortality, and migration.Find more key insights for the annual population growth in countries like Mexico and Canada.
2010-2018; 2019. US Census Annual Estimates of the Resident Population for Selected Age Groups by Sex for the United States. The estimates for the 2010-2018 dataset are based on the 2010 Census and reflect changes to the April 1, 2010 population due to the Count Question Resolution program and geographic program revisions. Median age is calculated based on single year of age. The estimates for 2019 are based on a one-year dataset that was published on the US Census website in 2021. For population estimates methodology statements, see http://www.census.gov/popest/methodology/index.html.
https://www.icpsr.umich.edu/web/ICPSR/studies/34755/termshttps://www.icpsr.umich.edu/web/ICPSR/studies/34755/terms
This data collection contains summary statistics on population and housing subjects derived from the responses to the 2010 Census questionnaire. Population items include sex, age, average household size, household type, and relationship to householder such as nonrelative or child. Housing items include tenure (whether a housing unit is owner-occupied or renter-occupied), age of householder, and household size for occupied housing units. Selected aggregates and medians also are provided. The summary statistics are presented in 71 tables, which are tabulated for multiple levels of observation (called "summary levels" in the Census Bureau's nomenclature), including, but not limited to, regions, divisions, states, metropolitan/micropolitan areas, counties, county subdivisions, places, ZIP Code Tabulation Areas (ZCTAs), school districts, census tracts, American Indian and Alaska Native areas, tribal subdivisions, and Hawaiian home lands. There are 10 population tables shown down to the county level and 47 population tables and 14 housing tables shown down to the census tract level. Every table cell is represented by a separate variable in the data. Each table is iterated for up to 330 population groups, which are called "characteristic iterations" in the Census Bureau's nomenclature: the total population, 74 race categories, 114 American Indian and Alaska Native categories, 47 Asian categories, 43 Native Hawaiian and Other Pacific Islander categories, and 51 Hispanic/not Hispanic groups. Moreover, the tables for some large summary areas (e.g., regions, divisions, and states) are iterated for portions of geographic areas ("geographic components" in the Census Bureau's nomenclature) such as metropolitan/micropolitan statistical areas and the principal cities of metropolitan statistical areas. The collection has a separate set of files for every state, the District of Columbia, Puerto Rico, and the National File. Each file set has 11 data files per characteristic iteration, a data file with geographic variables called the "geographic header file," and a documentation file called the "packing list" with information about the files in the file set. Altogether, the 53 file sets have 110,416 data files and 53 packing list files. Each file set is compressed in a separate ZIP archive (Datasets 1-56, 72, and 99). Another ZIP archive (Dataset 100) contains a Microsoft Access database shell and additional documentation files besides the codebook. The National File (Dataset 99) constitutes the National Update for Summary File 2. The National Update added summary levels for the United States as a whole, regions, divisions, and geographic areas that cross state lines such as Core Based Statistical Areas.
In terms of population size, the sex ratio in the United States favors females, although the gender gap is remaining stable. In 2010, there were around 5.17 million more women, with the difference projected to decrease to around 3 million by 2027.
Gender ratios by U.S. state In the United States, the resident population was estimated to be around 331.89 million in 2021. The gender distribution of the nation has remained steady for several years, with women accounting for approximately 51.1 percent of the population since 2013. Females outnumbered males in the majority of states across the country in 2020, and there were eleven states where the gender ratio favored men.
Metro areas by population National differences between male and female populations can also be analyzed by metropolitan areas. In general, a metropolitan area is a region with a main city at its center and adjacent communities that are all connected by social and economic factors. The largest metro areas in the U.S. are New York, Los Angeles, and Chicago. In 2019, there were more women than men in all three of those areas, but Jackson, Missouri was the metro area with the highest share of female population.