Cities in the U.S. are getting hotter, and that is causing significant health risks, especially to minorities, the elderly, and impoverished. There is significant spatial variation in temperature across a city due to changes in the landscape (elevation, tree cover, development, etc). NOAA has been engaged in a nationwide effort with CAPA Strategies to use a combination of Sentinel-2 satellite data along with temperature readings recorded from car- and bike-mounted sensors to generate detailed maps of the urban areas most impacted by heat. These measurements have been combined into single raster layers for morning, afternoon, and evening temperatures. As of 2020, 27 cities (26 in the U.S) have been mapped; a total of 50 cities will be mapped by the end of 2021. This layer shows the census tract (neighborhood) averages for those temperatures, along with additional information calculated for each neighborhood including:Temperature anomaly (neighborhood temperature compared to the citywide average based on the CAPA data)Impervious surfaceTree coverDemographicsTotal populationPopulation <5Population >65MinorityMedian incomePovertyCombining these different types of information can help planners identify areas at risk and help to develop mitigation and resilience plans to improve urban living conditions. More information about the campaign can be found in this Story Map by NOAA.

Notice: this is not the latest Heat Island Severity image service. For 2023 data, visit https://tpl.maps.arcgis.com/home/item.html?id=db5bdb0f0c8c4b85b8270ec67448a0b6. This layer contains the relative heat severity for every pixel for every city in the United States. This 30-meter raster was derived from Landsat 8 imagery band 10 (ground-level thermal sensor) from the summers of 2018 and 2019.Federal statistics over a 30-year period show extreme heat is the leading cause of weather-related deaths in the United States. Extreme heat exacerbated by urban heat islands can lead to increased respiratory difficulties, heat exhaustion, and heat stroke. These heat impacts significantly affect the most vulnerable—children, the elderly, and those with preexisting conditions.The purpose of this layer is to show where certain areas of cities are hotter than the average temperature for that same city as a whole. Severity is measured on a scale of 1 to 5, with 1 being a relatively mild heat area (slightly above the mean for the city), and 5 being a severe heat area (significantly above the mean for the city). The absolute heat above mean values are classified into these 5 classes using the Jenks Natural Breaks classification method, which seeks to reduce the variance within classes and maximize the variance between classes. Knowing where areas of high heat are located can help a city government plan for mitigation strategies.This dataset represents a snapshot in time. It will be updated yearly, but is static between updates. It does not take into account changes in heat during a single day, for example, from building shadows moving. The thermal readings detected by the Landsat 8 sensor are surface-level, whether that surface is the ground or the top of a building. Although there is strong correlation between surface temperature and air temperature, they are not the same. We believe that this is useful at the national level, and for cities that don’t have the ability to conduct their own hyper local temperature survey. Where local data is available, it may be more accurate than this dataset. Dataset SummaryThis dataset was developed using proprietary Python code developed at The Trust for Public Land, running on the Descartes Labs platform through the Descartes Labs API for Python. The Descartes Labs platform allows for extremely fast retrieval and processing of imagery, which makes it possible to produce heat island data for all cities in the United States in a relatively short amount of time.What can you do with this layer?This layer has query, identify, and export image services available. Since it is served as an image service, it is not necessary to download the data; the service itself is data that can be used directly in any Esri geoprocessing tool that accepts raster data as input.Using the Urban Heat Island (UHI) Image ServicesThe data is made available as an image service. There is a processing template applied that supplies the yellow-to-red or blue-to-red color ramp, but once this processing template is removed (you can do this in ArcGIS Pro or ArcGIS Desktop, or in QGIS), the actual data values come through the service and can be used directly in a geoprocessing tool (for example, to extract an area of interest). Following are instructions for doing this in Pro.In ArcGIS Pro, in a Map view, in the Catalog window, click on Portal. In the Portal window, click on the far-right icon representing Living Atlas. Search on the acronyms “tpl” and “uhi”. The results returned will be the UHI image services. Right click on a result and select “Add to current map” from the context menu. When the image service is added to the map, right-click on it in the map view, and select Properties. In the Properties window, select Processing Templates. On the drop-down menu at the top of the window, the default Processing Template is either a yellow-to-red ramp or a blue-to-red ramp. Click the drop-down, and select “None”, then “OK”. Now you will have the actual pixel values displayed in the map, and available to any geoprocessing tool that takes a raster as input. Below is a screenshot of ArcGIS Pro with a UHI image service loaded, color ramp removed, and symbology changed back to a yellow-to-red ramp (a classified renderer can also be used): Other Sources of Heat Island InformationPlease see these websites for valuable information on heat islands and to learn about exciting new heat island research being led by scientists across the country:EPA’s Heat Island Resource CenterDr. Ladd Keith, University of Arizona Dr. Ben McMahan, University of Arizona Dr. Jeremy Hoffman, Science Museum of Virginia Dr. Hunter Jones, NOAADaphne Lundi, Senior Policy Advisor, NYC Mayor's Office of Recovery and ResiliencyDisclaimer/FeedbackWith nearly 14,000 cities represented, checking each city's heat island raster for quality assurance would be prohibitively time-consuming, so The Trust for Public Land checked a statistically significant sample size for data quality. The sample passed all quality checks, with about 98.5% of the output cities error-free, but there could be instances where the user finds errors in the data. These errors will most likely take the form of a line of discontinuity where there is no city boundary; this type of error is caused by large temperature differences in two adjacent Landsat scenes, so the discontinuity occurs along scene boundaries (see figure below). The Trust for Public Land would appreciate feedback on these errors so that version 2 of the national UHI dataset can be improved. Contact Dale.Watt@tpl.org with feedback.

Urban heat islands are small areas where temperatures are unnaturally high - usually due to dense buildings, expansive hard surfaces, or a lack of tree cover or greenspace. People living in these communities are exposed to more dangerous conditions, especially as daytime high and nighttime low temperatures increase over time. NOAA Climate Program Office and CAPA Strategies have partnered with cities around the United States to map urban heat islands. Using Sentinel-2 satellite thermal data along with on-the-ground sensors, air temperature and heat indexes are calculated for morning, afternoon, and evening time periods. The NOAA Visualization Lab, part of the NOAA Satellite and Information Service, has made the original heat mapping data available as dynamic image services.Dataset SummaryPhenomenon Mapped: air temperatureUnits: degrees Fahrenheit Cell Size: 30 metersPixel Type: 32 bit floating pointData Coordinate Systems: WGS84 Mosaic Projection: WGS84 Extent: cities within the United StatesSource: NOAA and CAPA StrategiesPublication Date: September 20, 2021What can you do with this layer?This imagery layer supports communities' UHI spatial analysis and mapping capabilities. The symbology can be manually changed, or a processing template applied to the layer will provide a custom rendering. Each city can be queried.Related layers include Morning Air Temperature and Afternoon Air Temperature. Cities IncludedBoulder, CO Brooklyn, NY Greenwich Village, NY Columbia, SC Columbia, MO Columbus, OH Knoxville, TN Jacksonville, FL Las Vegas, NV Milwaukee, WI Nashville, TN Omaha, NE Philadelphia, PA Rockville, MD Gaithersburg, MD Takoma Park, MD San Francisco, CA Spokane, WA Abingdon, VA Albuquerque, NM Arlington, MA Woburn, MA Arlington, VA Atlanta, GA Charleston, SC Charlottesville, VA Clarksville, IN Farmville, VA Gresham, OR Harrisonburg, VA Kansas City, MO Lynchburg, VA Manhattan, NY Bronx, NY Newark, NJ Jersey City, NJ Elizabeth, NJ Petersburg, VA Raleigh, NC Durham, NC Richmond, VA Richmond, IN Salem, VA San Diego, CA Virginia Beach, VA Winchester, VA Austin, TX Burlington, VT Cincinnati, OH Detroit, MI El Paso, TX Houston, TX Jackson, MS Las Cruces, NM Miami, FL New Orleans, LA Providence, RI Roanoke, VA San Jose, CA Seattle, WA Vancouver, BC Canada Boston, MA Fort Lauderdale, FL Honolulu, HI Boise, ID Nampa, ID Los Angeles, CA Yonkers, NY Oakland, CA Berkeley, CA San Juan, PR Sacramento, CA San Bernardino, CA Victorville, CA West Palm Beach, FL Worcester, MA Washington, D.C. Baltimore, MD Portland, ORCities may apply to be a part of the Heat Watch program through the CAPA Strategies website. Attribute Table Informationcity_name: Evening Air Temperature Observations in Floating-Point (°F)

The data presented on this page concern the 2020-2022 mapping of temperature differences, the classification maps of these temperature differences (i.e. urban heat and freshness islands) and the map of the urban heat island intensity index. These different maps are detailed below: - The mapping of Temperature differences in °C represents the temperature difference in the city compared to a nearby forest. It was produced at the scale of the ecumene of Quebec (2021 census, 185,453 km2). This mapping, provided on a grid with a spatial resolution of 15 m, was carried out with a predictive machine learning model built on Landsat-8 satellite data provided by the *United States Geological Survey (USGS) * as well as from other geospatial variables such as hydrography and topography. - Mapping of classes of surface temperature differences, i.e. _Islands of urban heat and freshness (ICFU) * as well as from other geospatial variables such as hydrography and topography. - Mapping of classes of surface temperature differences, i.e. _Islands of urban heat and freshness (ICFU) _ was conducted for * population centers from the 2021 census * (CTRPOP) with at least 1,000 inhabitants and a density of at least 400 inhabitants per km2 to which is added a 2 km buffer zone. It thus covers all major urban centers, i.e. 14,072 km2. The method for categorizing ICFUs is the ranking of predicted temperature differences for each population center into 9 levels. Classes 8 and 9 are considered Urban Heat Islands and classes 1, 2, and 3 as Urban Freshness Islands. The interval values for each class and population center are shown in the production metadata file. Since the surface temperatures were analyzed at the scale of the Quebec ecumene, but the classification intervals were calculated for each population center individually, the differences in temperature grouped into the different classes vary from one region to another. Thus, there are differences observed in the predicted temperature differences between North and South Quebec and according to urban realities. For example, a temperature difference of 2°C may be present in class 1 (cooler) in a population center located in southern Quebec, but may be present in class 9 (very hot) in a population center in northern Quebec. It is therefore important to interpret the identification of heat islands in relation to the relative temperature difference data produced at the Quebec ecumene scale. In addition to this map, the map of * Temperature variations for the urbanization perimeters of the smallest municipalities 2020-2022 * covers all the urbanization perimeters that are not (or only partially) covered by the ICFU map. Thus, the two maps put side by side allow a complete coverage of all population centers and urbanization perimeters in Quebec. - The _Urban Heat Island Intensity Index (SUHII) _ map _ represents the Surface Urban Heat Island Intensity (SUHII) index _ represents the Surface Urban Heat Island Intensity (SUHII) index. This index is calculated for each * dissemination island * (ID) of Statistics Canada included in the * 2021 census population centers * (CTRPOP) * () * (CTRPOP). It highlights areas with higher heat island intensity, by calculating a weighted average from the classes of temperature differences, giving more weight to the hottest classes. This weight is proportional to the class number (for example, a class 9 surface is 9 times more important in the index than the same area with a class 1). These maps as well as those of * 2013-2014 * are used for the * Analysis of change between the mapping of heat/freshness islands 2013-2014 and 2020-2022 *. For more details on the creation of the various maps as well as their advantages, limitations and potential uses, consult the * Technote * (simplified version) and/or the * methodological report * (version complete). The production of this data was coordinated by the National Institute of Public Health of Quebec (INSPQ) and carried out by the forest remote sensing laboratory of the Center for Forestry Education and Research (CERFO), funded under the * 2013-2020 Climate Change Action Plan * of the Quebec government entitled Le Québec en action vert 2020.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Cities in the U.S. are getting hotter, and that is causing significant health risks, especially to minorities, the elderly, and impoverished. There is significant spatial variation in temperature across a city due to changes in the landscape (elevation, tree cover, development, etc). NOAA has been engaged in a nationwide effort with CAPA Strategies to use a combination of Sentinel-2 satellite data along with temperature readings recorded from car- and bike-mounted sensors to generate detailed maps of the urban areas most impacted by heat. These measurements have been combined into single raster layers for morning, afternoon, and evening temperatures. As of 2020, 27 cities (26 in the U.S) have been mapped; a total of 50 cities will be mapped by the end of 2021. This layer shows the census tract (neighborhood) averages for those temperatures, along with additional information calculated for each neighborhood including:Temperature anomaly (neighborhood temperature compared to the citywide average based on the CAPA data)Impervious surfaceTree coverDemographicsTotal populationPopulation <5Population >65MinorityMedian incomePovertyCombining these different types of information can help planners identify areas at risk and help to develop mitigation and resilience plans to improve urban living conditions. More information about the campaign can be found in this Story Map by NOAA.

The Urban Heat Island (UHI) effect represents the relatively higher temperatures found in urban areas compared to surrounding rural areas owing to higher proportions of impervious surfaces and the release of waste heat from vehicles and heating and cooling systems. Paved surfaces and built structures tend to absorb shortwave radiation from the sun and release long-wave radiation after a lag of a few hours. The Global Urban Heat Island (UHI) Data Set, 2013, estimates the land surface temperature within urban areas in degrees Celsius (average summer daytime maximum and average summer nighttime minimum) as well as the difference between those temperatures and the temperatures in surrounding rural areas, defined as a 10km buffer around the urban extent. Urban extents are from SEDAC�s Global Rural-Urban Mapping Project, Version 1 (GRUMPv1), and land surface temperatures are from SEDAC�s Global Summer Land Surface Temperature (LST) Grids, 2013, which are derived from the Aqua Level-3 Moderate Resolution Imaging Spectroradiometer (MODIS) Version 5 global daytime and nighttime Land Surface Temperature (LST) 8-day composite data (MYD11A2). For most regions, the UHI data set provides the average daytime maximum (1:30 p.m. overpass) and average nighttime minimum (1:30 a.m. overpass) temperatures in urban and rural areas, and the urban-rural temperature differences, derived from LST data representing a 40-day time-span during July-August (Julian days 185-224) in the northern hemisphere and January-February (Julian days 001-040) in the southern hemisphere. LST grid cells with missing values resulting from high cloud cover in tropical regions were filled with daytime maximum and nighttime minimum LST values from April-May 2013 in the northern hemisphere and December 2013-January 2014 in the southern hemisphere, where available. Some data gaps remain in areas where data were insufficient (e.g., Central Africa).

Notice: this is not the latest Heat Island Severity image service. For 2023 data, visit https://tpl.maps.arcgis.com/home/item.html?id=db5bdb0f0c8c4b85b8270ec67448a0b6. This layer contains the relative heat severity for every pixel for every city in the contiguous United States. This 30-meter raster was derived from Landsat 8 imagery band 10 (ground-level thermal sensor) from the summer of 2021, patched with data from 2020 where necessary.Federal statistics over a 30-year period show extreme heat is the leading cause of weather-related deaths in the United States. Extreme heat exacerbated by urban heat islands can lead to increased respiratory difficulties, heat exhaustion, and heat stroke. These heat impacts significantly affect the most vulnerable—children, the elderly, and those with preexisting conditions.The purpose of this layer is to show where certain areas of cities are hotter than the average temperature for that same city as a whole. Severity is measured on a scale of 1 to 5, with 1 being a relatively mild heat area (slightly above the mean for the city), and 5 being a severe heat area (significantly above the mean for the city). The absolute heat above mean values are classified into these 5 classes using the Jenks Natural Breaks classification method, which seeks to reduce the variance within classes and maximize the variance between classes. Knowing where areas of high heat are located can help a city government plan for mitigation strategies.This dataset represents a snapshot in time. It will be updated yearly, but is static between updates. It does not take into account changes in heat during a single day, for example, from building shadows moving. The thermal readings detected by the Landsat 8 sensor are surface-level, whether that surface is the ground or the top of a building. Although there is strong correlation between surface temperature and air temperature, they are not the same. We believe that this is useful at the national level, and for cities that don’t have the ability to conduct their own hyper local temperature survey. Where local data is available, it may be more accurate than this dataset. Dataset SummaryThis dataset was developed using proprietary Python code developed at The Trust for Public Land, running on the Descartes Labs platform through the Descartes Labs API for Python. The Descartes Labs platform allows for extremely fast retrieval and processing of imagery, which makes it possible to produce heat island data for all cities in the United States in a relatively short amount of time.What can you do with this layer?This layer has query, identify, and export image services available. Since it is served as an image service, it is not necessary to download the data; the service itself is data that can be used directly in any Esri geoprocessing tool that accepts raster data as input.In order to click on the image service and see the raw pixel values in a map viewer, you must be signed in to ArcGIS Online, then Enable Pop-Ups and Configure Pop-Ups.Using the Urban Heat Island (UHI) Image ServicesThe data is made available as an image service. There is a processing template applied that supplies the yellow-to-red or blue-to-red color ramp, but once this processing template is removed (you can do this in ArcGIS Pro or ArcGIS Desktop, or in QGIS), the actual data values come through the service and can be used directly in a geoprocessing tool (for example, to extract an area of interest). Following are instructions for doing this in Pro.In ArcGIS Pro, in a Map view, in the Catalog window, click on Portal. In the Portal window, click on the far-right icon representing Living Atlas. Search on the acronyms “tpl” and “uhi”. The results returned will be the UHI image services. Right click on a result and select “Add to current map” from the context menu. When the image service is added to the map, right-click on it in the map view, and select Properties. In the Properties window, select Processing Templates. On the drop-down menu at the top of the window, the default Processing Template is either a yellow-to-red ramp or a blue-to-red ramp. Click the drop-down, and select “None”, then “OK”. Now you will have the actual pixel values displayed in the map, and available to any geoprocessing tool that takes a raster as input. Below is a screenshot of ArcGIS Pro with a UHI image service loaded, color ramp removed, and symbology changed back to a yellow-to-red ramp (a classified renderer can also be used): Other Sources of Heat Island InformationPlease see these websites for valuable information on heat islands and to learn about exciting new heat island research being led by scientists across the country:EPA’s Heat Island Resource CenterDr. Ladd Keith, University of ArizonaDr. Ben McMahan, University of Arizona Dr. Jeremy Hoffman, Science Museum of Virginia Dr. Hunter Jones, NOAA Daphne Lundi, Senior Policy Advisor, NYC Mayor's Office of Recovery and ResiliencyDisclaimer/FeedbackWith nearly 14,000 cities represented, checking each city's heat island raster for quality assurance would be prohibitively time-consuming, so The Trust for Public Land checked a statistically significant sample size for data quality. The sample passed all quality checks, with about 98.5% of the output cities error-free, but there could be instances where the user finds errors in the data. These errors will most likely take the form of a line of discontinuity where there is no city boundary; this type of error is caused by large temperature differences in two adjacent Landsat scenes, so the discontinuity occurs along scene boundaries (see figure below). The Trust for Public Land would appreciate feedback on these errors so that version 2 of the national UHI dataset can be improved. Contact Dale.Watt@tpl.org with feedback.

Urban heat islands are small areas where temperatures are unnaturally high - usually due to dense buildings, expansive hard surfaces, or a lack of tree cover or greenspace. People living in these communities are exposed to more dangerous conditions, especially as daytime high and nighttime low temperatures increase over time. NOAA Climate Program Office and CAPA Strategies have partnered with cities around the United States to map urban heat islands. The NOAA Visualization Lab, part of the NOAA Satellite and Information Service, has made the original heat mapping data available as feature services.

Urban Heat Island (UHI) is considered one of the significant problems posed to human beings due to the urbanization and industrialization of human civilization. The leading causes of UHI are the vast amounts of heat urban structures produce as they absorb and re-radiate solar radiation and anthropogenic heat sources. The issue mainly affects cities or metropolises with a vast population and a thriving economy. The problem will worsen significantly in the future due to the predicted three billion people living in urban areas worldwide. Due to the severity of the problem, accessing up-to-date information layers that can support city planners and decision-makers in the context of climate resilience is a demanding problem nowadays.

UrbAlytics is an experimental sub-project of the H2020-funded project AI4Copernicus that aims to bridge Artificial Intelligence with Earth Observations, producing information layers that can support city planners and decision-makers in the context of climate resilience and related challenges in urban areas. This research investigates, thanks to the joint expertise of the partners Latitudo 40 and LAND Research Lab®, the Urban Heat Island (UHI) effect, evaluating its impacts on cities, assessing Ecosystem Services provided by Blue and Green Infrastructures and proposing a set of Nature-Based Solutions (NBS) for climate adaptation and extreme heat mitigation.

The dataset

This dataset is the tool's output of a fully automated workflow realized during the project and tested for the cities of Milan and Naples, pilot users of the experiment. The choice of Milan and Naples allows for different readiness levels, data availability, and urban-climatic conditions. For each city, the dataset contains the following layers for the analysis period 2018-2022.

HEATWAVE POTENTIAL RISK (HPR)

Risk Assessment mapping concerning extreme heat, considering the severity of the heat island phenomenons, the exposure of sensitive age groups and the vulnerability due to city morphology and surface materials. The risk assessment is the first step in defining a methodology that aims to assess the effectiveness of mitigation and adaptation strategies to climate extremes. It's a value in [0,1], where the higher the value higher the risk.

MICROCLIMATIC PERFORMANCE INDEX (MPI)

The role of vegetation in the city in abating the Heat Island effect has been widely demonstrated. In this context, deploying Urban Green Infrastructure is recognized as one of the most important strategies to mitigate UHI and promote a resilient city environment. The significance of the mitigation role of the Heat Island phenomenon that vegetation assumes makes it necessary to map Urban Green Infrastructure to estimate a cooling potential. Estimating the microclimatic performance of urban vegetation is crucial to plan adaptation and mitigation actions for the UHI effect. In this work, up-to-date Tree Cover Density and Land Cover maps have been produced using machine learning applied to Sentinel-2 satellite imagery. Those maps have been interpolated and combined, creating 20 Blue and Green Infrastructures classes. Each category's microclimatic performance score was attributed based on evapotranspiration potential, shading and albedo. The output is a map with integer values in [1, 20], where the lower the value higher the microclimatic performance.

PARK COOL ISLANDS (PCI)

Park Cool Islands layer identifies the most performing areas during extreme summer heatwaves, according to their size and relevant characteristics, providing reliable information to citizens and urban planners about the safest and coolest areas during extreme heatwaves. Since the green areas' type and composition can influence their cooling effects, we considered both the size and composition of urban parks to identify the most performing green areas in terms of the Park Cool Island effect. The layer distinguishes between major and minor Park Cool Islands. Major PCI includes areas covered by at least 50% of tree canopy coverage and bigger than 2 hectares with an estimated cooling distance of 300 m buffer. Minor PCI includes green areas whose surface is between 1 and 2 hectares as well as those green areas bigger than 2 hectares but covered by less than 50% of tree canopy coverage, with an estimated cooling distance of 100 m buffer.

Contact Information

If you would like further information about the dataset or if you experience any issues downloading files, please contact us giovanni.giacco@latitudo40.com, giulia.castellazzi@landsrl.com

Polygons representing heat islands on the ground surface. A heat island is defined as the difference in temperatures observed between two surrounding environments at the same time. The different temperature differences are mainly explained by the type of soil layout such as the vegetation cover, the impermeability of the materials and the thermal properties of the materials. This difference can reach more than 12°C. The 2020-2030 Montreal Climate Plan aims, among other things, to improve planning and regulatory tools in urban planning. Montréal has thus committed to updating the climate change vulnerability analysis, including the heat island map, carried out as part of the 2015-2020 Agglomération de Montréal Climate Change Adaptation Plan and to integrating it into the next urban and mobility plan. The urban heat island maps were produced in collaboration with the Department of Geography of the University of Quebec in Montreal (UQAM). The data can also be viewed on the interactive heat island map.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

Land surface temperature (LST) maps, and urban heat island (UHI) maps, for Australian capital cities, calculated over summer 2018-19. Lineage: Land surface temperatures were calculated using data from the Landsat 8 thermal infrared sensor (TIRS) band 10. Each image was processed using the generalised single channel method of Jiménez-Muñoz et al. (2003, 2009). The required atmospheric parameters were obtained from publicly available observations by the Australian Government Bureau of Meteorology (BOM). The required land surface emissivity (LSE) values were estimated using the NDVI approach (Sobrino & Raissouni 2000). Urban Heat Island (UHI) was estimated by subtracting from the LST images an estimate of non-urban baseline temperature. This baseline was estimated by a first-order fit to the temperature of native vegetation within and around each urban centre.

Urban heat islands are small areas where temperatures are unnaturally high - usually due to dense buildings, expansive hard surfaces, or a lack of tree cover or greenspace. People living in these communities are exposed to more dangerous conditions, especially as daytime high and nighttime low temperatures increase over time. NOAA Climate Program Office and CAPA Strategies have partnered with cities around the United States to map urban heat islands. The NOAA Visualization Lab, part of the NOAA Satellite and Information Service, has made the original heat mapping data available as feature services.

Notice: this is not the latest Heat Island Anomalies image service. For 2023 data visit https://tpl.maps.arcgis.com/home/item.html?id=e89a556263e04cb9b0b4638253ca8d10.This layer contains the relative degrees Fahrenheit difference between any given pixel and the mean heat value for the city in which it is located, for every city in the United States. This 30-meter raster was derived from Landsat 8 imagery band 10 (ground-level thermal sensor) from the summers of 2019 and 2020.Federal statistics over a 30-year period show extreme heat is the leading cause of weather-related deaths in the United States. Extreme heat exacerbated by urban heat islands can lead to increased respiratory difficulties, heat exhaustion, and heat stroke. These heat impacts significantly affect the most vulnerable—children, the elderly, and those with preexisting conditions.The purpose of this layer is to show where certain areas of cities are hotter or cooler than the average temperature for that same city as a whole. This dataset represents a snapshot in time. It will be updated yearly, but is static between updates. It does not take into account changes in heat during a single day, for example, from building shadows moving. The thermal readings detected by the Landsat 8 sensor are surface-level, whether that surface is the ground or the top of a building. Although there is strong correlation between surface temperature and air temperature, they are not the same. We believe that this is useful at the national level, and for cities that don’t have the ability to conduct their own hyper local temperature survey. Where local data is available, it may be more accurate than this dataset. Dataset SummaryThis dataset was developed using proprietary Python code developed at The Trust for Public Land, running on the Descartes Labs platform through the Descartes Labs API for Python. The Descartes Labs platform allows for extremely fast retrieval and processing of imagery, which makes it possible to produce heat island data for all cities in the United States in a relatively short amount of time.What can you do with this layer?This layer has query, identify, and export image services available. Since it is served as an image service, it is not necessary to download the data; the service itself is data that can be used directly in any Esri geoprocessing tool that accepts raster data as input.In order to click on the image service and see the raw pixel values in a map viewer, you must be signed in to ArcGIS Online, then Enable Pop-Ups and Configure Pop-Ups.Using the Urban Heat Island (UHI) Image ServicesThe data is made available as an image service. There is a processing template applied that supplies the yellow-to-red or blue-to-red color ramp, but once this processing template is removed (you can do this in ArcGIS Pro or ArcGIS Desktop, or in QGIS), the actual data values come through the service and can be used directly in a geoprocessing tool (for example, to extract an area of interest). Following are instructions for doing this in Pro.In ArcGIS Pro, in a Map view, in the Catalog window, click on Portal. In the Portal window, click on the far-right icon representing Living Atlas. Search on the acronyms “tpl” and “uhi”. The results returned will be the UHI image services. Right click on a result and select “Add to current map” from the context menu. When the image service is added to the map, right-click on it in the map view, and select Properties. In the Properties window, select Processing Templates. On the drop-down menu at the top of the window, the default Processing Template is either a yellow-to-red ramp or a blue-to-red ramp. Click the drop-down, and select “None”, then “OK”. Now you will have the actual pixel values displayed in the map, and available to any geoprocessing tool that takes a raster as input. Below is a screenshot of ArcGIS Pro with a UHI image service loaded, color ramp removed, and symbology changed back to a yellow-to-red ramp (a classified renderer can also be used): Other Sources of Heat Island InformationPlease see these websites for valuable information on heat islands and to learn about exciting new heat island research being led by scientists across the country:EPA’s Heat Island Resource CenterDr. Ladd Keith, University of ArizonaDr. Ben McMahan, University of Arizona Dr. Jeremy Hoffman, Science Museum of Virginia Dr. Hunter Jones, NOAA Daphne Lundi, Senior Policy Advisor, NYC Mayor's Office of Recovery and ResiliencyDisclaimer/FeedbackWith nearly 14,000 cities represented, checking each city's heat island raster for quality assurance would be prohibitively time-consuming, so The Trust for Public Land checked a statistically significant sample size for data quality. The sample passed all quality checks, with about 98.5% of the output cities error-free, but there could be instances where the user finds errors in the data. These errors will most likely take the form of a line of discontinuity where there is no city boundary; this type of error is caused by large temperature differences in two adjacent Landsat scenes, so the discontinuity occurs along scene boundaries (see figure below). The Trust for Public Land would appreciate feedback on these errors so that version 2 of the national UHI dataset can be improved. Contact Dale.Watt@tpl.org with feedback.

Mayor Greg Fischer formed the Louisville Metro Office of Sustainability in 2012 with a mission of promoting environmental conservation, the health, wellness and prosperity of our citizens, and embedding sustainability into the culture of the Louisville community. Creating a culture of sustainability will be achieved through broad-based education and awareness efforts as well as implementation of projects and initiatives to influence behavior change.Data Dictionary: NEIGHBORHOOD - The neighborhood in Louisville.TOTAL NEW GREEN ROOFS - The number of green roofs installed. Each green roof is assumed to be 10,000 square feet.TOTAL GRASS PLANTED - The amount of bare dirt land planted with grass or other greenery, measured in hectares.TOTAL TREES PLANTED - The number of new trees planted.TOTAL COOL PAVING - Cool paving is pavement material engineered to exhibit a higher reflectivity than conventional pavement. Cool paving can be porous, made of a light colored material, or both. Cool paving is measured in hectares.TOTAL NEW COOL ROOFS - The number of cool roofs installed. Each cool roof is assumed to be 10,000 square feet. A cool roof can be steep-sloped or low-sloped or flat. A cool roof is define as a roof with a top-level material certified by ENERGY STAR or rated by the Cool Roof Rating Council as "cool." More information is available at https://louisvilleky.gov/government/sustainability/incentives#1Contact: sustainability@louisvilleky.gov

Urban heat mapping, heat islands and social vulnerability datasets based on thermal data captured over metropolitan Adelaide in 2022.

Charlottesville participated in the 2021 NIHHIS-CAPA Urban Heat Island Mapping Campaign, a nationwide citizen-science based effort to collect local data on temperatures and humidity levels across the city. How urban environments and neighborhoods are built affects the amount of heat absorbed and retained, which can increase or reduce the impact of extreme heat events. Increases in extreme heat are one of the top projected impacts Charlottesville will experience from climate change.Data was collected by ~30 volunteers on August 24, 2021 along 7 pre-set routes (5 driving routes and 2 bicycle routes) during a heat wave on a day with high heat and low precipitation. The collected data was processed by CAPA Strategies and is now available through the City of Charlottesville's Open Data Portal. A PDF Report, including generated maps and explaining the data collection methodology, is also available.More information can be found on the City's Urban Heat Island Mapping Campaign webpage.File Notations:traverses (.shp, vector shapefile) = data collected by campaign participantsrasters (.tif, geotiff) = heat surface modelsam = morning; af = afternoon; pm = eveningt = temperature; hi = heat indexf = fahrenheite.g. pm_hi_f.tif = evening heat index geotiff raster with fahrenheit values.

The National Integrated Heat Health Information System (NIHHIS) and its partners are hosting a webinar series to feature community case studies on what happens after Urban Heat Island mapping campaigns are conducted. The first webinar of the series, “Exploring the Heat Hazard”, will take place on July 29th at 2PM EDT and will highlight the range of experience of heat across the US. Key discussions will include a variety of methods and approaches to measure heat, from satellites, mobile transects, stationary observations, to wearable sensors. Speakers for this event include Jen Runkle (NC State University), Cameron Lee (Kent State University), and Brian Garcia (Warning Coordination Meteorologist, NOAA/NWS), with moderation by Noura Randle (NOAA/CPO).

Map illustrating the differences in relative surface temperatures for all small urban areas in Quebec. The relative temperature difference is the temperature difference in the city compared to a nearby wooded area. With a 9-level scale for classifying relative differences in temperature, this map indicates areas that are relatively cooler or warmer within urbanization perimeters. This map is complementary to the * map of urban heat/fresh islands (ICFU) *. In fact, it covers all areas of urbanization that are not (or only partially) covered by the ICFU card. Thus, the two maps placed side by side allow a complete coverage of all population centers and urbanization perimeters in Quebec. The interval values for each class of temperature difference within the urbanization perimeters also come from the ICFU map: the classification thresholds for the temperature differences of an urbanization perimeter are reproduced from those of the ICFU map for the population center closest to the urbanization perimeter. The production of this data was carried out by the National Institute of Public Health of Quebec (INSPQ) and was funded under the * Plan for a Green Economy * of the Government of Quebec.**This third party metadata element was translated using an automated translation tool (Amazon Translate).**

This map layer shows the urban heat island effect in degrees Celsius. The urban heat island effect is the average air temperature difference between the urban and surrounding rural areas. This map layer displays a prediction based on several underlying map data: population density, wind speed, amount of green, blue and hardening. The urban heat island effect is greatest in an environment with little greenery and a lot of buildings. The effect with associated high (feeling) temperatures is detrimental to people's health.

About the App This app hosts data from Heat Resilience Solutions for Boston (the Heat Plan). It features maps that include daytime and nighttime air temperature, urban heat island index, and extreme heat duration. About the DataA citywide urban canopy model was developed to produce modeled air temperature maps for the City of Boston Heat Resilience Study in 2021. Sasaki Associates served as the lead consultant working with the City of Boston. The technical methodology for the urban canopy model was produced by Klimaat Consulting & Innovation Inc. A weeklong analysis period during July 18th-24th, 2019 was selected to produce heat characteristics maps for the study (one of the hottest weeks in Boston that year). The data array represents the modelled, average hourly urban meteorological condition at 100 meter spatial resolution. This dataset was processed into urban heat indices and delivered as georeferenced image layers. The data layers have been resampled to 10 meter resolution for visualization purposes. For the detailed methodology of the urban canopy model, visit the Heat Resilience Study project website.