Important Note: This item is in mature support as of June 2021 and is no longer updated.

This map presents land cover and detailed topographic maps for the United States. It uses the USA Topographic Map service. The map includes the National Park Service (NPS) Natural Earth physical map at 1.24km per pixel for the world at small scales, i-cubed eTOPO 1:250,000-scale maps for the contiguous United States at medium scales, and National Geographic TOPO! 1:100,000 and 1:24,000-scale maps (1:250,000 and 1:63,000 in Alaska) for the United States at large scales. The TOPO! maps are seamless, scanned images of United States Geological Survey (USGS) paper topographic maps.

The maps provide a very useful basemap for a variety of applications, particularly in rural areas where the topographic maps provide unique detail and features from other basemaps.

To add this map service into a desktop application directly, go to the entry for the USA Topo Maps map service.

Tip: Here are some famous locations as they appear in this web map, accessed by including their location in the URL that launches the map:

Grand Canyon, Arizona

Golden Gate, California

The Statue of Liberty, New York

Washington DC

Canyon De Chelly, Arizona

Yellowstone National Park, Wyoming

Area 51, Nevada

USGS Historical Quadrangle in GeoPDF. The USGS Historical Topographic Map Collection (HTMC) is scanning all scales and all editions of topographic maps published by the U.S. Geological Survey (USGS) since the inception of the topographic mapping program in 1884.

These data are part of a larger USGS project to develop an updated geospatial database of mines, mineral deposits and mineral regions in the United States. Mine and prospect-related symbols, such as those used to represent prospect pits, mines, adits, dumps, tailings, etc., hereafter referred to as “mine” symbols or features, are currently being digitized on a state-by-state basis from the 7.5-minute (1:24, 000-scale) and the 15-minute (1:48, 000 and 1:62,500-scale) archive of the USGS Historical Topographic Maps Collection, or acquired from available databases (California and Nevada, 1:24,000-scale only). Compilation of these features is the first phase in capturing accurate locations and general information about features related to mineral resource exploration and extraction across the U.S. To date, the compilation of 400,000-plus point and polygon mine symbols from approximately 51,000 maps of 17 western states (AZ, CA, CO, ID, KS, MT, ND, NE, NM, NV, OK, OR, SD, UT, WA, WY and western TX) has been completed. The process renders not only a more complete picture of exploration and mining in the western U.S., but an approximate time line of when these activities occurred. The data may be used for land use planning, assessing abandoned mine lands and mine-related environmental impacts, assessing the value of mineral resources from Federal, State and private lands, and mapping mineralized areas and systems for input into the land management process. The data are presented as three groups of layers based on the scale of the source maps. No reconciliation between the data groups was done.

description: This map presents land cover imagery for the world and detailed topographic maps for the United States. The map includes the National Park Service (NPS) Natural Earth physical map at 1.24km per pixel for the world at small scales, i-cubed eTOPO 1:250,000-scale maps for the contiguous United States at medium scales, and National Geographic TOPO! 1:100,000 and 1:24,000-scale maps (1:250,000 and 1:63,000 in Alaska) for the United States at large scales. The TOPO! maps are seamless, scanned images of United States Geological Survey (USGS) paper topographic maps. For more information on this map, including our terms of use, visit us online at http://goto.arcgisonline.com/maps/USA_Topo_Maps; abstract: topography, topographic, land cover, physical, TOPO!imageryBaseMapsEarthCover (Imagery, basemaps, and land cover)USA Topo Maps

Download US Geological Survey topographic maps in multiple formats, scales, and years, including 1:24,000-scale topo maps, using the USGS topoView web application.Learn how to use topoView: https://youtu.be/UCTIvQqVr4E

From https://www.usgs.gov/core-science-systems/national-geospatial-program/national-map :"The National Map is a suite of products and services that provide access to base geospatial information to describe the landscape of the United States and its territories. The National Map embodies 11 primary products and services and numerous applications and ancillary services. The National Map supports data download, digital and print versions of topographic maps, geospatial data services, and online viewing. Customers can use geospatial data and maps to enhance their recreational experience, make life-saving decisions, support scientific missions, and for countless other activities. Nationally consistent geospatial data from The National Map enable better policy and land management decisions and the effective enforcement of regulatory responsibilities. The National Map is easily accessible for display on the Web through such products as topographic maps and services and as downloadable data. The geographic information available from The National Map includes boundaries, elevation, geographic names, hydrography, land cover, orthoimagery, structures, and transportation. The majority of The National Map effort is devoted to acquiring and integrating medium-scale (nominally 1:24,000 scale) geospatial data for the eight base layers from a variety of sources and providing access to theresulting seamless coverages of geospatial data. The National Map also serves as the source of base mapping information for derived cartographic products, including 1:24,000 scale US Topo maps and georeferenced digital files of scanned historic topographic maps. Data sets and products from The National Map are intended for use by government, industry, and academia—focusing on geographic information system (GIS) users—as well as the public, especially in support of recreation activities. Other types of georeferenced or mapping information can be added within The National Map Viewer or brought in with The National Map data into a GIS to create specific types of maps or map views and (or) to perform modeling or analyses."

The Digital Raster Graphic (DRG) is a raster image of a scanned USGS topographic map including the collar information, georeferenced to the UTM grid. This version of the Digital Raster Graphic (DRG) has been clipped to remove the collar (white border of the map) and has been reprojected to geographic coordinates.

Layered geospatial PDF 7.5 Minute Quadrangle Map. Layers of geospatial data include orthoimagery, roads, grids, geographic names, elevation contours, hydrography, boundaries, and other selected map features. This map depicts geographic features on the surface of the earth. One intended purpose is to support emergency response at all levels of government. The geospatial data in this map are from selected National Map data holdings and other government sources.

This Digital Raster Graphic (DRG) was created using scanned U.S. Geological Survey 7.5-minute 1 to 24,000 scale maps georeferenced in Universal Transverse Mercator (UTM) grid. DRGs can be acquired with or without collar information for use in Geographic Information System (GIS) environment. Collarless DRGs can be edge matched creating a continuous collection of topographic maps.

U.S. Geological Survey, Department of the Interior - The annual US Topo acquisition plan is to collect topographic map data in the form of US Topo GeoPDF maps over the United States and its territories on a 3-year revision cycle. The FY19 acquisition plan currently anticipates production of 18,500 (or more) US Topo maps this year. Interested parties who wish to become a data acquisition partner with the USGS in FY19 or in future years should contact a USGS Geospatial Liaison - http://liaisons.usgs.gov/geospatial/documents/TNM_Partnership_User_ContactList.pdf.

The map includes the National Park Service (NPS) Natural Earth physical map at 1.24km per pixel for the world at small scales, i-cubed eTOPO 1:250,000-scale maps for the contiguous United States at medium scales, and National Geographic TOPO! 1:100,000 and 1:24,000-scale maps (1:250,000 and 1:63,000 in Alaska) for the United States at large scales. The TOPO! maps are seamless, scanned images of United States Geological Survey (USGS) paper topographic maps. For more information on this map, including the terms of use, visit us online.The full Kansas geospatial catalog is administered by the Kansas Data Access & Support Center (DASC) and can be found at the following URL: https://hub.kansasgis.org/

The Minnesota Geospatial Image Service provides versatile access to the USGS Topographic Map Series layers (DRG format) using a Web Map Service (WMS). Using this service eliminates the need to download and store these background layers locally. Three scales of USGS topographic maps are available through this service: 1:250,000, 1:100,000, and 1:24,000. The maps are 1949-1994 vintage.

For more information:
- How to use a WMS: https://www.mngeo.state.mn.us/chouse/wms/how_to_use_wms.html
- Technical specifications for using this service: https://www.mngeo.state.mn.us/chouse/wms/wms_image_server_specs.html
- About topo maps: https://www.mngeo.state.mn.us/chouse/elevation/topo_maps.html
- USGS services providing access to current topo maps: https://apps.nationalmap.gov/services/

Layers of geospatial data include contours, boundaries, land cover, hydrography, roads, transportation, geographic names, structures, and other selected map features.

The color shaded relief map of the conterminous U.S. was created from 15 arc-second digital elevation model (DEM) data. The data set traces its origins back to the early 1960's when .01 inch scans of 1:250,000 USGS topographic sheets were produced by the Defense Mapping Agency and converted to 3 second data by the USGS National Cartographic Information Center. The 15 second grid cell data (Michael Webring, written communication) used in this report dates from the mid-1980's with occasional local and regional updates. The 3 second grid nodes were averaged with a 6x6 operator and decimated to 15 second grid cells which is about the resolution of the original .01 inch data set. The 3 second data is available as 950 separate 1x1 degree quadrangles from the USGS EROS Data Center.

Additional information available at "http://pubs.usgs.gov/of/of99-011/1readme.html"

[Summary provided by the USGS.]

.

A scope of work was developed in response to a request by the U. S. Army Corps of Engineers, Philadelphia District. The request was to perform a topographic change grid analysis for the Frankford 7.5-minute quadrangle, 1:24,000-scale topographic map, which includes the Wissinoming neighborhood, and the Germantown 7.5-minute quadrangle, which includes the Logan and Feltonville neighborhoods of the City of Philadelphia. The following tasks were performed under this scope of work: A GPS-corrected GIS grid analysis for each quadrangle was completed and is accompanied by documentation that describes procedures and provides metadata of the informational content of the GIS. A high-resolution global positioning system (GPS) survey was conducted for each topographic quadrangle in order to evaluate and correct systematic discrepancies in elevation between the modern and historic surveys. Prior to release, the fully documented GPS-corrected GIS grid analysis for each quadrangle was reviewed for (1) com-pleteness of documentation and for (2) appropriate analysis and discussion of uncertainties. The following report is in fulfillment of the tasks outlined in this scope of work and was performed by the U. S. Geological Survey for the U. S. Army Corps of Engineers, Philadelphia District under MIPR agreement number: W25PHS93358288.

NCED is currently involved in researching the effectiveness of anaglyph maps in the classroom and are working with educators and scientists to interpret various Earth-surface processes. Based on the findings of the research, various activities and interpretive information will be developed and available for educators to use in their classrooms. Keep checking back with this website because activities and maps are always being updated. We believe that anaglyph maps are an important tool in helping students see the world and are working to further develop materials and activities to support educators in their use of the maps.

This website has various 3-D maps and supporting materials that are available for download. Maps can be printed, viewed on computer monitors, or projected on to screens for larger audiences. Keep an eye on our website for more maps, activities and new information. Let us know how you use anaglyph maps in your classroom. Email any ideas or activities you have to ncedmaps@umn.edu

Anaglyph paper maps are a cost effective offshoot of the GeoWall Project. Geowall is a high end visualization tool developed for use in the University of Minnesota's Geology and Geophysics Department. Because of its effectiveness it has been expanded to 300 institutions across the United States. GeoWall projects 3-D images and allows students to see 3-D representations but is limited because of the technology. Paper maps are a cost effective solution that allows anaglyph technology to be used in classroom and field-based applications.

Maps are best when viewed with RED/CYAN anaglyph glasses!

A note on downloading: "viewable" maps are .jpg files; "high-quality downloads" are .tif files. While it is possible to view the latter in a web-browser in most cases, the download may be slow. As an alternative, try right-clicking on the link to the high-quality download and choosing "save" from the pop-up menu that results. Save the file to your own machine, then try opening the saved copy. This may be faster than clicking directly on the link to open it in the browser.

World Map: 3-D map that highlights oceanic bathymetry and plate boundaries.

Continental United States: 3-D grayscale map of the Lower 48.

Western United States: 3-D grayscale map of the Western United States with state boundaries.

Regional Map: 3-D greyscale map stretching from Hudson Bay to the Central Great Plains. This map includes the Western Great Lakes and the Canadian Shield.

Minnesota Map: 3-D greyscale map of Minnesota with county and state boundaries.

Twin Cities: 3-D map extending beyond Minneapolis and St. Paul.

Twin Cities Confluence Map: 3-D map highlighting the confluence of the Mississippi and Minnesota Rivers. This map includes most of Minneapolis and St. Paul.

Minneapolis, MN: 3-D topographical map of South Minneapolis.

Bassets Creek, Minneapolis: 3-D topographical map of the Bassets Creek watershed.

North Minneapolis: 3-D topographical map highlighting North Minneapolis and the Mississippi River.

St. Paul, MN: 3-D topographical map of St. Paul.

Western Suburbs, Twin Cities: 3-D topographical map of St. Louis Park, Hopkins and Minnetonka area.

Minnesota River Valley Suburbs, Twin Cities: 3-D topographical map of Bloomington, Eden Prairie and Edina area.

Southern Suburbs, Twin Cities: 3-D topographical map of Burnsville, Lakeville and Prior Lake area.

Southeast Suburbs, Twin Cities: 3-D topographical map of South St. Paul, Mendota Heights, Apple Valley and Eagan area.

Northeast Suburbs, Twin Cities: 3-D topographical map of White Bear Lake, Maplewood and Roseville area.

Northwest Suburbs, Mississippi River, Twin Cities: 3-D topographical map of North Minneapolis, Brooklyn Center and Maple Grove area.

Blaine, MN: 3-D map of Blaine and the Mississippi River.

White Bear Lake, MN: 3-D topographical map of White Bear Lake and the surrounding area.

Maple Grove, MN: 3-D topographical mmap of the NW suburbs of the Twin Cities.

USGS Topo is a topographic tile cache base map that combines the most current data (Boundaries, Names, Transportation, Elevation, Hydrography, Land Cover, and other themes) that make up The National Map. Contours generated for the US Topo product are included and are visible along with other data to the 1:18,000 zoom scale. This product is designed to provide a seamless view of the data, closely resembling The National Map's US Topo (GeoPDF) product at large scales, in a GIS accessible format.

This map is designed to be used as a basemap by GIS professionals and as a reference map by anyone. The map includes administrative boundaries, cities, water features, physiographic features, parks, landmarks, highways, roads, railways, and airports overlaid on land cover and shaded relief imagery for added context. The map provides coverage for the world down to a scale of ~1:72k. Coverage is provided down to ~1:4k for the following areas: Australia and New Zealand; India; Europe; Canada; Mexico; the continental United States and Hawaii; South America and Central America; Africa; and most of the Middle East. Coverage down to ~1:1k and ~1:2k is available in select urban areas. This basemap was compiled from a variety of best available sources from several data providers, including the U.S. Geological Survey (USGS), U.S. Environmental Protection Agency (EPA), U.S. National Park Service (NPS), Food and Agriculture Organization of the United Nations (FAO), Department of Natural Resources Canada (NRCAN), GeoBase, Agriculture and Agri-Food Canada, Garmin, HERE, Esri, OpenStreetMap contributors, and the GIS User Community. For more information on this map, including the terms of use, visit us online.

The Geographic Names Information System (GNIS) is an automated data system developed by the United States Geological Survey (USGS) to standardize and disseminate information on geographic names. GNIS provides primary information for all known places, features, and areas in the United States identified by proper name. The data file described here is a standard report file written from the National Geographic Names Data Base that lists all populated place records in GNIS for the United States. The entries are sorted by state and then listed alphabetically by feature name. Information provided includes the official placename, the feature type, the Federal Information Processing Standards (FIPS) code referencing the state, the principal county in which the place is located, the geographic coordinates (in degrees, minutes, and seconds) that locate the approximate original center of the place, the year of any pertinent United States Board on Geographic Names activity regarding the placename or its application, and a reference to the 1:24,000-scale USGS topographic map on which the feature is portrayed. The elevation in feet is given if available, as is the 1980 Census population figure.

This part of DS 781 presents data for the bathymetric contours for several seafloor maps of the Offshore of Salt Point map area, California. The vector data file is included in "Contours_OffshoreSaltPoint.zip," which is accessible from https://pubs.usgs.gov/ds/781/OffshoreSaltPoint/data_catalog_OffshoreSaltPoint.html. These data accompany the pamphlet and map sheets of Johnson, S.Y., Dartnell, P., Golden, N.E., Hartwell, S.R., Erdey, M.D., Greene, H.G., Cochrane, G.R., Kvitek, R.G., Manson, M.W., Endris, C.A., Dieter, B.E., Watt, J.T., Krigsman, L.M., Sliter, R.W., Lowe, E.N., and Chin, J.L. (S.Y. Johnson and S.A. Cochran, eds.), 2015, California State Waters Map Series—Offshore of Salt Point, California: U.S. Geological Survey Open-File Report 2015–1098, pamphlet 37 p., 10 sheets, scale 1:24,000, https://doi.org/10.3133/ofr20151098. 10-m interval contours of the Offshore of SaltPoint map area, California, were generated from bathymetry data collected by California State Universit ...