THIS MAP IS NOT AUTHORITATIVE. SEE TERMS OF USE BELOW.This web map was developed by the National Oceanic and Atmospheric Administration’s (NOAA) Office for Coastal Management and is featured in the U.S. Great Lakes Collaborative Benthic Habitat Mapping Common Operating Dashboard in support of the Collaborative Benthic Habitat Mapping in the Nearshore Waters of the Great Lakes Basin Project. This multi-year, multi-agency project is funded through the Great Lakes Restoration Initiative (GLRI) and focuses on new bathymetric data (airborne lidar and vessel based sonar) acquisition, validation, and benthic habitat characterization mapping of the nearshore waters (0-80 meters) in the U.S. Great Lakes. This project also contributes to the regional Lakebed 2030 campaign, which aims to have high-density bathymetric data available for the entirety of the Great Lakes by 2030. This web map contains data layers reflecting the current status of bathy data coverage in the nearshore (0-80 meters) of the U.S. Great Lakes, including acquisition (lidar and multibeam sonar), ground-truthing/validation, and benthic habitat mapping and characterization. Acquisition layers include coverage areas that have been acquired and are available for public use (green) as well as those that have been acquired, but are not yet available or are still in progress (orange). The nearshore water depth layers (0-25 and 25-80 meters) were created using the National Centers for Environmental Information (NCEI) Great Lakes Bathymetry (3-second resolution) grid extracts. The 0 to 25 meter nearshore water depth layer represents areas where bathymetric lidar data acquisition could ideally be conducted, depending on water condition and turbidity. The 25 to 80 meter layer shows locations where acoustic data acquisition can occur. See below for information on additional data layers. All data originally projected in the following coordinate system: EPSG:3175, NAD 1983 Great Lakes and St Lawrence Albers.This map will continue to be updated as new information is made available.Source Data for Bathy Coverage Layers - Acquired/Available:Topobathy and Bathy Lidar (NOAA's Data Access Viewer: https://coast.noaa.gov/dataviewer/#/; U.S. Interagency Elevation Inventory (USIEI): https://coast.noaa.gov/inventory/). Multibeam Sonar (National Centers for Environmental Information (NCEI) Bathymetric Data Viewer: https://www.ncei.noaa.gov/maps/bathymetry/; NOAA's Data Access Viewer: https://coast.noaa.gov/dataviewer/#/; U.S. Interagency Elevation Inventory (USIEI): https://coast.noaa.gov/inventory/; USGS ScienceBaseCatalog: https://www.sciencebase.gov/catalog/item/656e229bd34e7ca10833f950)Source Data for Bathy Coverage Layers - GLRI AOIs (2020-2024):Acquisition: NOAA Office for Coastal ManagementValidation/CMECS Characterizations: NOAA National Centers for Coastal Ocean Science (NCCOS)Source Data for Bathy Coverage Layers - In Progress and Planned:NOAA Office of Coast Survey Plans: https://gis.charttools.noaa.gov/arcgis/rest/services/Hydrographic_Services/Planned_Survey_Areas/MapServer/0NOAA Office for Coastal ManagementSource Data for Nearshore Water Depths:NOAA's National Centers for Environmental Information (NCEI) Great Lakes Bathymetry (3-second resolution) grid extracts: https://www.ncei.noaa.gov/maps/grid-extract/Source Data for Spatial Prioritization Layers:Great Lakes Spatial Priorities Study Results Jun 2021. https://gis.charttools.noaa.gov/arcgis/rest/services/IOCM/GreatLakes_SPS_Results_Jun_2021/MapServerMapping priorities within the proposed Wisconsin Lake Michigan National Marine Sanctuary (2018). https://gis.ngdc.noaa.gov/arcgis/rest/services/nccos/BiogeographicAssessments_WILMPrioritizationResults/MapServerThunder Bay National Marine Sanctuary Spatial Prioritization Results (2020). https://gis.ngdc.noaa.gov/arcgis/rest/services/nccos/BiogeographicAssessments_TBNMSPrioritizationResults/MapServerSource Data for Supplemental Data Layers:International Boundary Commission U.S./Canada Boundary (version 1.3 from 2018): https://www.internationalboundarycommission.org/en/maps-coordinates/coordinates.phpNational Oceanic and Atmospheric Administration (NOAA) HydroHealth 2018 Survey: https://wrecks.nauticalcharts.noaa.gov/arcgis/rest/services/Hydrographic_Services/HydroHealth_2018/ImageServerNational Oceanic and Atmospheric Administration (NOAA) Marine Protected Areas (MPA) Inventory 2023-2024: https://www.fisheries.noaa.gov/inport/item/69506National Oceanic and Atmospheric Administration (NOAA) National Marine Sanctuary Program Boundaries (2021): https://services2.arcgis.com/C8EMgrsFcRFL6LrL/arcgis/rest/services/ONMS_2021_Boundaries/FeatureServerNational Oceanic and Atmospheric Administration (NOAA) U.S. Bathymetry Gap Analysis: https://noaa.maps.arcgis.com/home/item.html?id=4d7d925fc96d47d9ace970dd5040df0aU.S. Environment Protection Agency (EPA) Areas of Concern: https://services.arcgis.com/cJ9YHowT8TU7DUyn/arcgis/rest/services/epa_areas_of_concern_glahf_viewlayer/FeatureServerU.S. Geological Survey (USGS) Great Lakes Subbasins: https://www.sciencebase.gov/catalog/item/530f8a0ee4b0e7e46bd300dd Latest update: February 20, 2025

This layer is sourced from maps.bts.dot.gov.

This U.S. Geological Survey (USGS) data release presents a digital database of geospatially enabled vector layers and tabular data transcribed from the geologic map of the Lake Owen quadrangle, Albany County, Wyoming, which was originally published as U.S. Geological Survey Geologic Quadrangle Map GQ-1304 (Houston and Orback, 1976). The 7.5-minute Lake Owen quadrangle is located in southeastern Wyoming approximately 25 miles (40 kilometers) southwest of Laramie in the west-central interior of southern Albany County, and covers most of the southern extent of Sheep Mountain, the southeastern extent of Centennial Valley, and a portion of the eastern Medicine Bow Mountains. This relational geodatabase, with georeferenced data layers digitized at the publication scale of 1:24,000, organizes and describes the geologic and structural data covering the quadrangle's approximately 35,954 acres and enables the data for use in spatial analyses and computer cartography. The data types presented in this release include geospatial features (points, lines, and polygons) with matching attribute tables, nonspatial descriptive and reference tables, and ancillary resource files for correct symbolization, in formats that conform to the Geologic Map Schema (GeMS) developed and released by the U.S. Geological Survey's National Cooperative Geologic Mapping Program (GeMS, 2020). When reconstructed from the geodatabase's vector layers and tabular data that has been symbolized according to specifications encoded in the accompanying style file, and using the supplied Federal Geographic Data Committee (FGDC) GeoAge font for labeling formations and GeoSym fonts for structural line decorations and orientation measurement symbols, this data release presents the Geologic Map as shown on the published GQ-1304 map sheet. These GIS data augment but do not supersede the information presented on GQ-1304. References: Houston, R.S., and Orback, C.J., 1976, Geologic Map of the Lake Owen Quadrangle, Albany County, Wyoming: U.S. Geological Survey Geologic Quadrangle Map GQ-1304, scale 1:24,000, https://doi.org/10.3133/gq1304. U.S. Geological Survey National Cooperative Geologic Mapping Program, 2020, GeMS (Geologic Map Schema)- A standard format for the digital publication of geologic maps: U.S. Geological Survey Techniques and Methods, book 11, chap. B10, 74 p., https://doi.org//10.3133/tm11B10.

The Digital Geologic-GIS Map of Lake Clark National Park and Preserve and Vicinity, Alaska is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (lacl_geology.gdb), a 2.) Open Geospatial Consortium (OGC) geopackage, and 3.) 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (lacl_geology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (lacl_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). The OGC geopackage is supported with a QGIS project (.qgz) file. Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) a readme file (lacl_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (lacl_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (lacl_geology_metadata_faq.pdf). Please read the lacl_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. Google Earth software is available for free at: https://www.google.com/earth/versions/. QGIS software is available for free at: https://www.qgis.org/en/site/. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (lacl_geology_metadata.txt or lacl_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the GIS data source map scale of 1:250,000 and United States National Map Accuracy Standards features are within (horizontally) 127 meters or 416.7 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in Google Earth, ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

THIS MAP IS NOT AUTHORITATIVE. SEE TERMS OF USE BELOW.This web map contains data layers reflecting the current status of bathy data coverage in the nearshore (0-80 meters) of the U.S. Great Lakes, including acquisition (lidar and multibeam sonar), ground-truthing/validation, and benthic habitat mapping and characterization. Acquisition layers include coverage areas that have been acquired and are available for public use (green) as well as those that have been acquired, but are not yet available or are still in progress (orange). The nearshore water depth layers (0-25 and 25-80 meters) were created using the National Centers for Environmental Information (NCEI) Great Lakes Bathymetry (3-second resolution) grid extracts. The 0 to 25 meter nearshore water depth layer represents areas where bathymetric lidar data acquisition could ideally be conducted, depending on water condition and turbidity. The 25 to 80 meter layer shows locations where acoustic data acquisition can occur. See below for information on additional data layers. All data originally projected in the following coordinate system: EPSG:3175, NAD 1983 Great Lakes and St Lawrence Albers.This map will continue to be updated as new information is made available.Source Data for Bathy Coverage Layers - Acquired/Available:Topobathy and Bathy Lidar (NOAA's Data Access Viewer: https://coast.noaa.gov/dataviewer/#/; U.S. Interagency Elevation Inventory (USIEI): https://coast.noaa.gov/inventory/). Multibeam Sonar (National Centers for Environmental Information (NCEI) Bathymetric Data Viewer: https://www.ncei.noaa.gov/maps/bathymetry/; NOAA's Data Access Viewer: https://coast.noaa.gov/dataviewer/#/; U.S. Interagency Elevation Inventory (USIEI): https://coast.noaa.gov/inventory/; USGS ScienceBaseCatalog: https://www.sciencebase.gov/catalog/item/656e229bd34e7ca10833f950)Source Data for Bathy Coverage Layers - GLRI AOIs (2020-2024):Acquisition: NOAA Office for Coastal ManagementValidation/CMECS Characterizations: NOAA National Centers for Coastal Ocean Science (NCCOS)Source Data for Bathy Coverage Layers - In Progress and Planned:NOAA Office of Coast Survey Plans: https://gis.charttools.noaa.gov/arcgis/rest/services/Hydrographic_Services/Planned_Survey_Areas/MapServer/0NOAA Office for Coastal ManagementSource Data for Nearshore Water Depths:NOAA's National Centers for Environmental Information (NCEI) Great Lakes Bathymetry (3-second resolution) grid extracts: https://www.ncei.noaa.gov/maps/grid-extract/Source Data for Spatial Prioritization Layers:Great Lakes Spatial Priorities Study Results Jun 2021. https://gis.charttools.noaa.gov/arcgis/rest/services/IOCM/GreatLakes_SPS_Results_Jun_2021/MapServerMapping priorities within the proposed Wisconsin Lake Michigan National Marine Sanctuary (2018). https://gis.ngdc.noaa.gov/arcgis/rest/services/nccos/BiogeographicAssessments_WILMPrioritizationResults/MapServerThunder Bay National Marine Sanctuary Spatial Prioritization Results (2020). https://gis.ngdc.noaa.gov/arcgis/rest/services/nccos/BiogeographicAssessments_TBNMSPrioritizationResults/MapServerSource Data for Supplemental Data Layers:International Boundary Commission U.S./Canada Boundary (version 1.3 from 2018): https://www.internationalboundarycommission.org/en/maps-coordinates/coordinates.phpNational Oceanic and Atmospheric Administration (NOAA) HydroHealth 2018 Survey: https://wrecks.nauticalcharts.noaa.gov/arcgis/rest/services/Hydrographic_Services/HydroHealth_2018/ImageServerNational Oceanic and Atmospheric Administration (NOAA) Marine Protected Areas (MPA) Inventory 2023-2024: https://www.fisheries.noaa.gov/inport/item/69506National Oceanic and Atmospheric Administration (NOAA) National Marine Sanctuary Program Boundaries (2021): https://services2.arcgis.com/C8EMgrsFcRFL6LrL/arcgis/rest/services/ONMS_2021_Boundaries/FeatureServerNational Oceanic and Atmospheric Administration (NOAA) U.S. Bathymetry Gap Analysis: https://noaa.maps.arcgis.com/home/item.html?id=4d7d925fc96d47d9ace970dd5040df0aU.S. Environment Protection Agency (EPA) Areas of Concern: https://services.arcgis.com/cJ9YHowT8TU7DUyn/arcgis/rest/services/epa_areas_of_concern_glahf_viewlayer/FeatureServerU.S. Geological Survey (USGS) Great Lakes Subbasins: https://www.sciencebase.gov/catalog/item/530f8a0ee4b0e7e46bd300dd Latest update: February 19, 2025

The National Hydrography Dataset Plus (NHDplus) maps the lakes, ponds, streams, rivers and other surface waters of the United States. Created by the US EPA Office of Water and the US Geological Survey, the NHDPlus provides mean annual and monthly flow estimates for rivers and streams. Additional attributes provide connections between features facilitating complicated analyses. For more information on the NHDPlus dataset see the NHDPlus v2 User Guide.Dataset SummaryPhenomenon Mapped: Surface waters and related features of the United States and associated territories not including Alaska.Geographic Extent: The United States not including Alaska, Puerto Rico, Guam, US Virgin Islands, Marshall Islands, Northern Marianas Islands, Palau, Federated States of Micronesia, and American SamoaProjection: Web Mercator Auxiliary Sphere Visible Scale: Visible at all scales but layer draws best at scales larger than 1:1,000,000Source: EPA and USGSUpdate Frequency: There is new new data since this 2019 version, so no updates planned in the futurePublication Date: March 13, 2019Prior to publication, the NHDPlus network and non-network flowline feature classes were combined into a single flowline layer. Similarly, the NHDPlus Area and Waterbody feature classes were merged under a single schema.Attribute fields were added to the flowline and waterbody layers to simplify symbology and enhance the layer's pop-ups. Fields added include Pop-up Title, Pop-up Subtitle, On or Off Network (flowlines only), Esri Symbology (waterbodies only), and Feature Code Description. All other attributes are from the original NHDPlus dataset. No data values -9999 and -9998 were converted to Null values for many of the flowline fields.What can you do with this layer?Feature layers work throughout the ArcGIS system. Generally your work flow with feature layers will begin in ArcGIS Online or ArcGIS Pro. Below are just a few of the things you can do with a feature service in Online and Pro.ArcGIS OnlineAdd this layer to a map in the map viewer. The layer is limited to scales of approximately 1:1,000,000 or larger but a vector tile layer created from the same data can be used at smaller scales to produce a webmap that displays across the full range of scales. The layer or a map containing it can be used in an application. Change the layer’s transparency and set its visibility rangeOpen the layer’s attribute table and make selections. Selections made in the map or table are reflected in the other. Center on selection allows you to zoom to features selected in the map or table and show selected records allows you to view the selected records in the table.Apply filters. For example you can set a filter to show larger streams and rivers using the mean annual flow attribute or the stream order attribute. Change the layer’s style and symbologyAdd labels and set their propertiesCustomize the pop-upUse as an input to the ArcGIS Online analysis tools. This layer works well as a reference layer with the trace downstream and watershed tools. The buffer tool can be used to draw protective boundaries around streams and the extract data tool can be used to create copies of portions of the data.ArcGIS ProAdd this layer to a 2d or 3d map. Use as an input to geoprocessing. For example, copy features allows you to select then export portions of the data to a new feature class. Change the symbology and the attribute field used to symbolize the dataOpen table and make interactive selections with the mapModify the pop-upsApply Definition Queries to create sub-sets of the layerThis layer is part of the ArcGIS Living Atlas of the World that provides an easy way to explore the landscape layers and many other beautiful and authoritative maps on hundreds of topics.Questions?Please leave a comment below if you have a question about this layer, and we will get back to you as soon as possible.

This map presents the percentage of existing wetlands that are in a protected status by sub-lake unit (reporting unit) for each Great Lake, as determined by the LAMPs for each lake. Lakes Michigan, Huron, Erie and Ontario report by sub-lake units. Lake Superior reports by watersheds.*Coastal Wetlands defined here as connected to the Great Lakes and >2 ha (5 acres) in size.Data SourcesWe used the following database for coastal wetland area:Great Lakes Coastal Wetlands 2004 Polygons (Great Lakes Coastal Wetland Consortium): https://www.glc.org/wp-content/uploads/2016/10/CWC-GreatLakesCoastalWetlandsInventory-Metadata.pdf We used the following databases for protected area: Nature Conservancy Canada (data agreement) Commission for Environmental Cooperation (databasin.org)- Canada Protected Terrestrial Areas 2012 (Ontario)Ontario GeoHub- Ontario Federal Protected Lands (Ontario) 2018:PAD-US (Protected Areas Database of the U.S.) 2018. CARL (Conservation and Recreation Lands) 2017. Feature Service for Conservation and Recreation Lands in the Great Lakes Atlantic Region (Wisconsin, Michigan, Ohio, Indiana, Iowa). This layer contains fee lands, preserves, designated lands and other protected lands. This layer does not contain easements.Consultations with regional land experts (The Nature Conservancy GIS Managers) for the states of Michigan, Ohio, Indiana, Illinois and Wisconsin.

THIS MAP IS NOT AUTHORITATIVE. SEE TERMS OF USE BELOW.This web map was developed by the National Oceanic and Atmospheric Administration’s (NOAA) Office for Coastal Management and is featured in the U.S. Great Lakes Collaborative Benthic Habitat Mapping Common Operating Dashboard in support of the Collaborative Benthic Habitat Mapping in the Nearshore Waters of the Great Lakes Basin Project. This multi-year, multi-agency project is funded through the Great Lakes Restoration Initiative (GLRI) and focuses on new bathymetric data (airborne lidar and vessel based sonar) acquisition, validation, and benthic habitat characterization mapping of the nearshore waters (0-80 meters) in the U.S. Great Lakes. This project also contributes to the regional Lakebed 2030 campaign, which aims to have high-density bathymetric data available for the entirety of the Great Lakes by 2030. This web map contains data layers reflecting the current status of bathy data coverage in the nearshore (0-80 meters) of the U.S. Great Lakes, including acquisition (lidar and multibeam sonar), ground-truthing/validation, and benthic habitat mapping and characterization. Acquisition layers include coverage areas that have been acquired and are available for public use (green) as well as those that have been acquired, but are not yet available or are still in progress (orange). The nearshore water depth layers (0-25 and 25-80 meters) were created using the National Centers for Environmental Information (NCEI) Great Lakes Bathymetry (3-second resolution) grid extracts. The 0 to 25 meter nearshore water depth layer represents areas where bathymetric lidar data acquisition could ideally be conducted, depending on water condition and turbidity. The 25 to 80 meter layer shows locations where acoustic data acquisition can occur. See below for information on additional data layers. All data originally projected in the following coordinate system: EPSG:3175, NAD 1983 Great Lakes and St Lawrence Albers.This map will continue to be updated as new information is made available.Source Data for Bathy Coverage Layers - Acquired/Available:Topobathy and Bathy Lidar (NOAA's Data Access Viewer: https://coast.noaa.gov/dataviewer/#/; U.S. Interagency Elevation Inventory (USIEI): https://coast.noaa.gov/inventory/). Multibeam Sonar (National Centers for Environmental Information (NCEI) Bathymetric Data Viewer: https://www.ncei.noaa.gov/maps/bathymetry/; NOAA's Data Access Viewer: https://coast.noaa.gov/dataviewer/#/; U.S. Interagency Elevation Inventory (USIEI): https://coast.noaa.gov/inventory/; USGS ScienceBaseCatalog: https://www.sciencebase.gov/catalog/item/656e229bd34e7ca10833f950)Source Data for Bathy Coverage Layers - GLRI AOIs (2020-2024):Acquisition: NOAA Office for Coastal ManagementValidation/CMECS Characterizations: NOAA National Centers for Coastal Ocean Science (NCCOS)Source Data for Bathy Coverage Layers - In Progress and Planned:NOAA Office of Coast Survey Plans: https://gis.charttools.noaa.gov/arcgis/rest/services/Hydrographic_Services/Planned_Survey_Areas/MapServer/0NOAA Office for Coastal ManagementSource Data for Nearshore Water Depths:NOAA's National Centers for Environmental Information (NCEI) Great Lakes Bathymetry (3-second resolution) grid extracts: https://www.ncei.noaa.gov/maps/grid-extract/Source Data for Spatial Prioritization Layers:Great Lakes Spatial Priorities Study Results Jun 2021. https://gis.charttools.noaa.gov/arcgis/rest/services/IOCM/GreatLakes_SPS_Results_Jun_2021/MapServerMapping priorities within the proposed Wisconsin Lake Michigan National Marine Sanctuary (2018). https://gis.ngdc.noaa.gov/arcgis/rest/services/nccos/BiogeographicAssessments_WILMPrioritizationResults/MapServerThunder Bay National Marine Sanctuary Spatial Prioritization Results (2020). https://gis.ngdc.noaa.gov/arcgis/rest/services/nccos/BiogeographicAssessments_TBNMSPrioritizationResults/MapServerSource Data for Supplemental Data Layers:International Boundary Commission U.S./Canada Boundary (version 1.3 from 2018): https://www.internationalboundarycommission.org/en/maps-coordinates/coordinates.phpNational Oceanic and Atmospheric Administration (NOAA) HydroHealth 2018 Survey: https://wrecks.nauticalcharts.noaa.gov/arcgis/rest/services/Hydrographic_Services/HydroHealth_2018/ImageServerNational Oceanic and Atmospheric Administration (NOAA) Marine Protected Areas (MPA) Inventory 2023-2024: https://www.fisheries.noaa.gov/inport/item/69506National Oceanic and Atmospheric Administration (NOAA) National Marine Sanctuary Program Boundaries (2021): https://services2.arcgis.com/C8EMgrsFcRFL6LrL/arcgis/rest/services/ONMS_2021_Boundaries/FeatureServerNational Oceanic and Atmospheric Administration (NOAA) U.S. Bathymetry Gap Analysis: https://noaa.maps.arcgis.com/home/item.html?id=4d7d925fc96d47d9ace970dd5040df0aU.S. Environment Protection Agency (EPA) Areas of Concern: https://services.arcgis.com/cJ9YHowT8TU7DUyn/arcgis/rest/services/epa_areas_of_concern_glahf_viewlayer/FeatureServerU.S. Geological Survey (USGS) Great Lakes Subbasins: https://www.sciencebase.gov/catalog/item/530f8a0ee4b0e7e46bd300dd Latest update: February 20, 2025

Heavy rainfall occurred across Louisiana during March 8-19, 2016, as a result of a massive, slow-moving southward dip in the jet stream, which moved eastward across Mexico, then neared the Gulf Coast, funneling deep tropical moisture into parts of the Gulf States and the Mississippi River Valley. The storm caused major flooding in north-central and southeastern Louisiana. Digital flood-inundation maps for a 20.1-mile reach within the community of Minden near Lake Bistineau in Bossier Parish and Bienville Parish, LA was created by the U.S. Geological Survey (USGS) in cooperation with Federal Emergency Management Agency (FEMA) to support response and recovery operations following a March 8-19, 2016 flood event. The inundation maps depict estimates of the areal extent and depth of flooding corresponding to 5 high-water marks (HWM) identified and surveyed by the USGS following the flood event.

The geodatabase contains 13 relate tables that together provide updated and synchronized classifications to an existing vegetation map layer for each of the nine park units in the Great Lakes Network (GLKN) of the National Park Service (NPS) Natural Resource Inventory and Monitoring Program. The classifications include 1) vegetation types at every hierarchical level in the 2015 version of the U.S. National Vegetation Classification (USNVC) and 2) map classes that represent vegetation and land cover in the vegetation map layers. Furthermore, the tables provide a crosswalk between the two classifications (vegetation and map). Each park unit in GLKN has received, at different times over several years, vegetation data products from the NPS Vegetation Mapping Inventory (VMI) Program. However, the vegetation and map classifications were at different stages of development over these years. With this geodatabase product, having a series of already linked relate tables, the original vegetation map layer for each park unit can be linked to the updated and synchronized classification information for both vegetation types and map classes.

This layer is a component of ENOW_Counties.

This map service presents spatial information about the Economics: National Ocean Watch (ENOW) data in the Web Mercator projection. The ENOW data provides time-series data on the ocean and Great Lakes economy, which includes six economic sectors dependent on the oceans and Great Lakes, and measures four economic indicators: Establishments, Employment, Wages, and Gross Domestic Product (GDP). The annual time-series data are available for about 400 coastal counties, 30 coastal states, 8 regions, and the nation. The service was developed by the National Oceanic and Atmospheric Administration (NOAA), but may contain data and information from a variety of data sources, including non-NOAA data. NOAA provides the information “as-is” and shall incur no responsibility or liability as to the completeness or accuracy of this information. NOAA assumes no responsibility arising from the use of this information. The NOAA Office for Coastal Management will make every effort to provide continual access to this service but it may need to be taken down during routine IT maintenance or in case of an emergency. If you plan to ingest this service into your own application and would like to be informed about planned and unplanned service outages or changes to existing services, please register for our Data Services Newsletter (http://coast.noaa.gov/digitalcoast/publications/subscribe). For additional information, please contact the NOAA Office for Coastal Management (coastal.info@noaa.gov).

© NOAA Office for Coastal Management

Some of the finest mountain scenery in the Southwest is found in the 1.6-million-acre Santa Fe National Forest. Here, you can find the headwaters of Pecos, Jemez, and Gallinas Rivers; mountain streams; lakes; and trout fishing. Travel into Pecos, San Pedro Parks, Chama, and Dome Wildernesses via wilderness pack trips, saddle, or on 1,000 miles of hiking trails. Try whitewater rafting on the Rio Chama or Rio Grande from May to September. Consider turkey, elk, deer, and bear hunting, or visit one of many nearby Indian pueblos, Spanish missions, and Indian ruins. Golden aspen grace the high country from September to October and snow blankets Santa Fe Ski Basin in winter. The Santa Fe National Forest GIS data available for download includes Santa Fe National Forest Geospatial (GIS) Datasets, Motor Vehicle Use Map (MVUM) Travel Aids - digital maps and data of the SFNF to upload to GPS units or Smart Phones, 7.5 Minute Topographic Maps (PDF and GeoTIFF) - US Forest Service topo maps only, USFS Geospatial Clearinghouse - includes GIS data of vegetation treatments, administrative boundaries, inventoried roadless areas, FSTopo datasets, USGS Map Locator and Downloader - download current and historic topo maps, Hardcopy Maps with information on how to purchase hard copy visitor, wilderness, or topographic maps. Resources in this dataset:Resource Title: Santa Fe National Forest Geospatial Data. File Name: Web Page, url: https://www.fs.usda.gov/main/santafe/landmanagement/gis

This dataset is a polygon feature class representing the Watershed Monitoring Program's Large Lakes (features >= 10 hectares) and Small Lakes (features > 4 hectares and less than 10 hectares). Information regarding the Status Monitoring Network can be found at https://floridadep.gov/dear/watershed-monitoring-section/content/status-monitoring-network. Information regarding the lake features in the USGS NHD can be found at https://floridadep.gov/dear/watershed-services-program/content/about-florida-national-hydrography-dataset.

The National Hydrography Dataset Plus High Resolution (NHDplus High Resolution) maps the lakes, ponds, streams, rivers and other surface waters of the United States. Created by the US Geological Survey, NHDPlus High Resolution provides mean annual flow and velocity estimates for rivers and streams. Additional attributes provide connections between features facilitating complicated analyses.For more information on the NHDPlus High Resolution dataset see the User’s Guide for the National Hydrography Dataset Plus (NHDPlus) High Resolution.Dataset SummaryPhenomenon Mapped: Surface waters and related features of the United States and associated territoriesGeographic Extent: The Contiguous United States, Hawaii, portions of Alaska, Puerto Rico, Guam, US Virgin Islands, Northern Marianas Islands, and American SamoaProjection: Web Mercator Auxiliary Sphere Visible Scale: Visible at all scales but layer draws best at scales larger than 1:1,000,000Source: USGSUpdate Frequency: AnnualPublication Date: July 2022This layer was symbolized in the ArcGIS Map Viewer and while the features will draw in the Classic Map Viewer the advanced symbology will not. Prior to publication, the network and non-network flowline feature classes were combined into a single flowline layer. Similarly, the Area and Waterbody feature classes were merged under a single schema.Attribute fields were added to the flowline and waterbody layers to simplify symbology and enhance the layer's pop-ups. Fields added include Pop-up Title, Pop-up Subtitle, Esri Symbology (waterbodies only), and Feature Code Description. All other attributes are from the original dataset. No data values -9999 and -9998 were converted to Null values.What can you do with this layer?Feature layers work throughout the ArcGIS system. Generally your work flow with feature layers will begin in ArcGIS Online or ArcGIS Pro. Below are just a few of the things you can do with a feature service in Online and Pro.ArcGIS OnlineAdd this layer to a map in the map viewer. The layer or a map containing it can be used in an application. Change the layer’s transparency and set its visibility rangeOpen the layer’s attribute table and make selections. Selections made in the map or table are reflected in the other. Center on selection allows you to zoom to features selected in the map or table and show selected records allows you to view the selected records in the table.Apply filters. For example you can set a filter to show larger streams and rivers using the mean annual flow attribute or the stream order attribute.Change the layer’s style and symbologyAdd labels and set their propertiesCustomize the pop-upUse as an input to the ArcGIS Online analysis tools. This layer works well as a reference layer with the trace downstream and watershed tools. The buffer tool can be used to draw protective boundaries around streams and the extract data tool can be used to create copies of portions of the data.ArcGIS ProAdd this layer to a 2d or 3d map.Use as an input to geoprocessing. For example, copy features allows you to select then export portions of the data to a new feature class.Change the symbology and the attribute field used to symbolize the dataOpen table and make interactive selections with the mapModify the pop-upsApply Definition Queries to create sub-sets of the layerThis layer is part of the ArcGIS Living Atlas of the World that provides an easy way to explore the landscape layers and many other beautiful and authoritative maps on hundreds of topics.Questions?Please leave a comment below if you have a question about this layer, and we will get back to you as soon as possible.

Link to the ScienceBase Item Summary page for the item described by this metadata record. Service Protocol: Link to the ScienceBase Item Summary page for the item described by this metadata record. Application Profile: Web Browser. Link Function: information

Layered GeoPDF 7.5 Minute Quadrangle Map. Layers of geospatial data include orthoimagery, roads, grids, geographic names, elevation contours, hydrography, and other selected map features.

THIS MAP IS NOT AUTHORITATIVE. SEE TERMS OF USE BELOW.This web map was developed by the National Oceanic and Atmospheric Administration’s (NOAA) Office for Coastal Management and is featured in the U.S. Great Lakes Collaborative Benthic Habitat Mapping Common Operating Dashboard in support of the Collaborative Benthic Habitat Mapping in the Nearshore Waters of the Great Lakes Basin Project. This multi-year, multi-agency project is funded through the Great Lakes Restoration Initiative (GLRI) and focuses on new bathymetric data (airborne lidar and vessel based sonar) acquisition, validation, and benthic habitat characterization mapping of the nearshore waters (0-80 meters) in the U.S. Great Lakes. This project also contributes to the regional Lakebed 2030 campaign, which aims to have high-density bathymetric data available for the entirety of the Great Lakes by 2030. This web map contains data layers reflecting the current status of bathy data coverage in the nearshore (0-80 meters) of the U.S. Great Lakes, including acquisition (lidar and multibeam sonar), ground-truthing/validation, and benthic habitat mapping and characterization. Acquisition layers include coverage areas that have been acquired and are available for public use (green) as well as those that have been acquired, but are not yet available or are still in progress (orange). The nearshore water depth layers (0-25 and 25-80 meters) were created using the National Centers for Environmental Information (NCEI) Great Lakes Bathymetry (3-second resolution) grid extracts. The 0 to 25 meter nearshore water depth layer represents areas where bathymetric lidar data acquisition could ideally be conducted, depending on water condition and turbidity. The 25 to 80 meter layer shows locations where acoustic data acquisition can occur. See below for information on additional data layers. All data originally projected in the following coordinate system: EPSG:3175, NAD 1983 Great Lakes and St Lawrence Albers.This map will continue to be updated as new information is made available.Source Data for Bathy Coverage Layers - Acquired/Available:Topobathy and Bathy Lidar (NOAA's Data Access Viewer: https://coast.noaa.gov/dataviewer/#/; U.S. Interagency Elevation Inventory (USIEI): https://coast.noaa.gov/inventory/). Multibeam Sonar (National Centers for Environmental Information (NCEI) Bathymetric Data Viewer: https://www.ncei.noaa.gov/maps/bathymetry/; NOAA's Data Access Viewer: https://coast.noaa.gov/dataviewer/#/; U.S. Interagency Elevation Inventory (USIEI): https://coast.noaa.gov/inventory/; USGS ScienceBaseCatalog: https://www.sciencebase.gov/catalog/item/656e229bd34e7ca10833f950)Source Data for Bathy Coverage Layers - GLRI AOIs (2020-2024):Acquisition: NOAA Office for Coastal ManagementValidation/CMECS Characterizations: NOAA National Centers for Coastal Ocean Science (NCCOS)Source Data for Bathy Coverage Layers - In Progress and Planned:NOAA Office of Coast Survey Plans: https://gis.charttools.noaa.gov/arcgis/rest/services/Hydrographic_Services/Planned_Survey_Areas/MapServer/0NOAA Office for Coastal ManagementSource Data for Nearshore Water Depths:NOAA's National Centers for Environmental Information (NCEI) Great Lakes Bathymetry (3-second resolution) grid extracts: https://www.ncei.noaa.gov/maps/grid-extract/Source Data for Spatial Prioritization Layers:Great Lakes Spatial Priorities Study Results Jun 2021. https://gis.charttools.noaa.gov/arcgis/rest/services/IOCM/GreatLakes_SPS_Results_Jun_2021/MapServerMapping priorities within the proposed Wisconsin Lake Michigan National Marine Sanctuary (2018). https://gis.ngdc.noaa.gov/arcgis/rest/services/nccos/BiogeographicAssessments_WILMPrioritizationResults/MapServerThunder Bay National Marine Sanctuary Spatial Prioritization Results (2020). https://gis.ngdc.noaa.gov/arcgis/rest/services/nccos/BiogeographicAssessments_TBNMSPrioritizationResults/MapServerSource Data for Supplemental Data Layers:International Boundary Commission U.S./Canada Boundary (version 1.3 from 2018): https://www.internationalboundarycommission.org/en/maps-coordinates/coordinates.phpNational Oceanic and Atmospheric Administration (NOAA) HydroHealth 2018 Survey: https://wrecks.nauticalcharts.noaa.gov/arcgis/rest/services/Hydrographic_Services/HydroHealth_2018/ImageServerNational Oceanic and Atmospheric Administration (NOAA) Marine Protected Areas (MPA) Inventory 2023-2024: https://www.fisheries.noaa.gov/inport/item/69506National Oceanic and Atmospheric Administration (NOAA) National Marine Sanctuary Program Boundaries (2021): https://services2.arcgis.com/C8EMgrsFcRFL6LrL/arcgis/rest/services/ONMS_2021_Boundaries/FeatureServerNational Oceanic and Atmospheric Administration (NOAA) U.S. Bathymetry Gap Analysis: https://noaa.maps.arcgis.com/home/item.html?id=4d7d925fc96d47d9ace970dd5040df0aU.S. Environment Protection Agency (EPA) Areas of Concern: https://services.arcgis.com/cJ9YHowT8TU7DUyn/arcgis/rest/services/epa_areas_of_concern_glahf_viewlayer/FeatureServerU.S. Geological Survey (USGS) Great Lakes Subbasins: https://www.sciencebase.gov/catalog/item/530f8a0ee4b0e7e46bd300dd Latest update: February 20, 2025

Heavy rainfall occurred across Louisiana during March 8-19, 2016, as a result of a massive, slow-moving southward dip in the jet stream, which moved eastward across Mexico, then neared the Gulf Coast, funneling deep tropical moisture into parts of the Gulf States and the Mississippi River Valley. The storm caused major flooding in north-central and southeastern Louisiana. Digital flood-inundation maps for Cross Lake near the community of Shreveport in Caddo Parish, LA was created by the U.S. Geological Survey (USGS) in cooperation with Federal Emergency Management Agency (FEMA) to support response and recovery operations following a March 8-19, 2016 flood event. The inundation maps depict estimates of the areal extent and depth of flooding corresponding to 7 High Water marks (HWM) identified and surveyed by the USGS following the flood event. First release: November 2016 Revised: September 2017 (ver. 1.1) Additionally, there is a revision history text file called "September_2017_Revisions" available on the main page that explains exactly what changed in the revision.

Layered GeoPDF 7.5 Minute Quadrangle Map. Layers of geospatial data include orthoimagery, roads, grids, geographic names, elevation contours, hydrography, and other selected map features.

Lake cover strongly affects the reflectance of the land surface over large areas of Alaska, and was useful for identifying extensive wetlands. Lake cover was based on the number of AVHRR water pixels in each mapped polygon, divided by the number of pixels in the polygon. Since the imagery has a pixel size of 1 km^2, lake cover is underestimated for areas with many small lakes. Pixels within 2 km of the coastline were excluded to avoid ocean water. The percent cover data were grouped into six categories: 25%. Back to Alaska Arctic Tundra Vegetation Map (Raynolds et al. 2006) Go to Website Link :: Toolik Arctic Geobotanical Atlas below for details on legend units, photos of map units and plant species, glossary, bibliography and links to ground data. Map Themes AVHRR NDVI , Bioclimate Subzone, Elevation, False Color-Infrared CIR, Floristic Province, Lake Cover, Landscape, Substrate Chemistry, Vegetation References Raynolds, M.K., Walker, D.A., Maier, H.A. 2005. Plant community-level mapping of arctic Alaska based on the Circumpolar Arctic Vegetation Map. Phytocoenologia. 35(4):821-848. http://doi.org/10.1127/0340-269X/2005/0035-0821 Raynolds, M.K., Walker, D.A., Maier, H.A. 2006. Alaska Arctic Tundra Vegetation Map. 1:4,000,000. U.S. Fish and Wildlife Service. Anchorage, AK.