In terms of population size, the sex ratio in the United States favors females, although the gender gap is remaining stable. In 2010, there were around 5.17 million more women, with the difference projected to decrease to around 3 million by 2027.
Gender ratios by U.S. state In the United States, the resident population was estimated to be around 331.89 million in 2021. The gender distribution of the nation has remained steady for several years, with women accounting for approximately 51.1 percent of the population since 2013. Females outnumbered males in the majority of states across the country in 2020, and there were eleven states where the gender ratio favored men.
Metro areas by population National differences between male and female populations can also be analyzed by metropolitan areas. In general, a metropolitan area is a region with a main city at its center and adjacent communities that are all connected by social and economic factors. The largest metro areas in the U.S. are New York, Los Angeles, and Chicago. In 2019, there were more women than men in all three of those areas, but Jackson, Missouri was the metro area with the highest share of female population.
As of July 1, 2022, there were 165.28 million males and 168 million females living in the United States. The overall population of the United States has remained steady since 2010.
Annual Resident Population Estimates by Age Group, Sex, Race, and Hispanic Origin: April 1, 2010 to July 1, 2015 // Source: U.S. Census Bureau, Population Division // The contents of this file are released on a rolling basis from December through June. // Note: 'In combination' means in combination with one or more other races. The sum of the five race-in-combination groups adds to more than the total population because individuals may report more than one race. Hispanic origin is considered an ethnicity, not a race. Hispanics may be of any race. Responses of 'Some Other Race' from the 2010 Census are modified. This results in differences between the population for specific race categories shown for the 2010 Census population in this file versus those in the original 2010 Census data. For more information, see https://www.census.gov/popest/data/historical/files/MRSF-01-US1.pdf. // The estimates are based on the 2010 Census and reflect changes to the April 1, 2010 population due to the Count Question Resolution program and geographic program revisions. // For detailed information about the methods used to create the population estimates, see https://www.census.gov/popest/methodology/index.html. // Each year, the Census Bureau's Population Estimates Program (PEP) utilizes current data on births, deaths, and migration to calculate population change since the most recent decennial census, and produces a time series of estimates of population. The annual time series of estimates begins with the most recent decennial census data and extends to the vintage year. The vintage year (e.g., V2015) refers to the final year of the time series. The reference date for all estimates is July 1, unless otherwise specified. With each new issue of estimates, the Census Bureau revises estimates for years back to the last census. As each vintage of estimates includes all years since the most recent decennial census, the latest vintage of data available supersedes all previously produced estimates for those dates. The Population Estimates Program provides additional information including historical and intercensal estimates, evaluation estimates, demographic analysis, and research papers on its website: https://www.census.gov/popest/index.html.
This statistic shows the percentage of the U.S. adult population that belong to the middle class from 1971 to 2015, by gender and marital status. In 2015, about 41 percent of unmarried women with children in their household were part of the U.S. middle class.
This study defined middle class income households as those with an income between 67 and 200 percent of the U.S. median household income, after adjustment for household size. Middle class income ranges from about 42,000 U.S. dollars to about 126,000 U.S. dollars per year for a three-person household.
The statistic shows the total population in the United States from 2015 to 2021, with projections up until 2027. In 2021, the total population of the U.S. amounted to approximately 332.18 million inhabitants.
The United States' economy over the last decade
The United States of America is the world’s largest national economy and the second most prominent trader globally, trailing just behind China. The country is also one of the most populated countries in the world, trailing only China and India. The United States' economy prospers primarily due to having a plentiful amount of natural resources and advanced infrastructure to cope with the production of goods and services, as well as the population and workforce to enable high productivity. Efficient productivity led to a slight growth in GDP almost every year over the past decade, despite undergoing several economic hardships towards the late 2000's.
In addition, the United States holds arguably one of the most important financial markets, with the majority of countries around the world having commercial connections with American companies. Dependency on a single market like the United States has however caused several global dilemmas, most evidently seen during the 2008 financial crisis. What initially started off as a bursting of the U.S. housing bubble lead to a worldwide recession and the necessity to reform national economics. The global financial crisis affected the United States most drastically, especially within the unemployment market as well as national debt, which continued to rise due to the United States having to borrow money in order to stimulate its economy.
https://en.wikipedia.org/wiki/Public_domainhttps://en.wikipedia.org/wiki/Public_domain
This dataset contains information about the demographics of all US cities and census-designated places with a population greater or equal to 65,000. This data comes from the US Census Bureau's 2015 American Community Survey. This product uses the Census Bureau Data API but is not endorsed or certified by the Census Bureau.
Student demographic and enrollment data by Pre-K for All Site from 2015-16 through 2017-18
This web map indicates the annual compound rate of total population change in the United States from 2000 to 2010. Total Population is the total number of residents in an area. Residence refers to the "usual place" where a person lives. Total Population for 2000 is from the U.S. Census 2000. The 2010 Total Population variable is estimated by Esri's proven annual demographic update methodology that blends GIS with statistical technology and a unique combination of data sources.The map is symbolized so that you can easily distinguish areas of population growth (i.e. shades of green) from areas of population decline (i.e. shades of red). It uses a 3 D effect to further emphasize those trends. The map reveals interesting patterns of recent population change in various regions and communities across the United States.The map shows population change at the County and Census Tract levels. The geography depicts Counties at 25m to 750k scale, Census Tracts at 750k to 100k scale.Esri's Updated Demographics (2010/2015) – Population, age, income, sex, race, marital status and other variables are among the variables included in the database. Each year, Esri's data development team employs its proven methodologies to update more than 2,000 demographic variables for a variety of geographies. See Updated Demographics for more information.
CC0 1.0 Universal Public Domain Dedicationhttps://creativecommons.org/publicdomain/zero/1.0/
License information was derived automatically
Supporting documentation on code lists, subject definitions, data accuracy, and statistical testing can be found on the American Community Survey website in the Data and Documentation section...Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, it is the Census Bureau''s Population Estimates Program that produces and disseminates the official estimates of the population for the nation, states, counties, cities and towns and estimates of housing units for states and counties..Explanation of Symbols:An ''**'' entry in the margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate..An ''-'' entry in the estimate column indicates that either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution..An ''-'' following a median estimate means the median falls in the lowest interval of an open-ended distribution..An ''+'' following a median estimate means the median falls in the upper interval of an open-ended distribution..An ''***'' entry in the margin of error column indicates that the median falls in the lowest interval or upper interval of an open-ended distribution. A statistical test is not appropriate..An ''*****'' entry in the margin of error column indicates that the estimate is controlled. A statistical test for sampling variability is not appropriate. .An ''N'' entry in the estimate and margin of error columns indicates that data for this geographic area cannot be displayed because the number of sample cases is too small..An ''(X)'' means that the estimate is not applicable or not available..Estimates of urban and rural population, housing units, and characteristics reflect boundaries of urban areas defined based on Census 2010 data. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..While the 2015 American Community Survey (ACS) data generally reflect the February 2013 Office of Management and Budget (OMB) definitions of metropolitan and micropolitan statistical areas; in certain instances the names, codes, and boundaries of the principal cities shown in ACS tables may differ from the OMB definitions due to differences in the effective dates of the geographic entities..The category "with a broadband Internet subscription" refers to those who said "Yes" to a DSL, cable, fiberoptic, mobile broadband, satellite, or fixed wireless subscription..Logical coverage edits applying a rules-based assignment of Medicaid, Medicare and military health coverage were added as of 2009 -- please see http://www.census.gov/library/working-papers/2010/demo/coverage_edits_final.html for more details. The 2008 data table in American FactFinder does not incorporate these edits. Therefore, the estimates that appear in these tables are not comparable to the estimates in the 2009 and later tables. Select geographies of 2008 data comparable to the 2009 and later tables are available at http://www.census.gov/data/tables/time-series/acs/1-year-re-run-health-insurance.html. The health insurance coverage category names were modified in 2010. See http://www.census.gov/topics/health/health-insurance/about/glossary.html#par_textimage_18 for a list of the insurance type definitions..Occupation codes are 4-digit codes and are based on Standard Occupational Classification 2010..Industry codes are 4-digit codes and are based on the North American Industry Classification System 2012. The Industry categories adhere to the guidelines issued in Clarification Memorandum No. 2, "NAICS Alternate Aggregation Structure for Use By U.S. Statistical Agencies," issued by the Office of Management and Budget..Employment and unemployment estimates may vary from the official labor force data released by the Bureau of Labor Statistics because of differences in survey design and data collection. For guidance on differences in employment and unemployment estimates from different sources go to Labor Force Guidance..The Census Bureau introduced a new set of disability questions in the 2008 ACS questionnaire. Accordingly, comparisons of disability data from 2008 or later with data from prior years are not recommended. For more information on these questions and their evaluation in the 2006 ACS Content Test, see the Evaluation Report Covering Disability..Due to methodological changes to data collection that began in data year 2013, comparisons of language estimates from that point to estimates from 2013 forw...
Tabular data of population by age groups, race and gender, and the poverty by race is attached to the split tract geography to create this split tract with population and poverty data. Split tract data is the product of 2010 census tracts split by 2015 incorporated city boundaries and unincorporated community/countywide statistical areas (CSA) boundaries. The census tract boundaries have been altered and aligned where necessary with legal city boundaries and unincorporated areas, including shoreline/coastal areas. Census Tract:Every 10 years the Census Bureau counts the population of the United States as mandated by Constitution. The Census Bureau (https://www.census.gov/) released 2010 geographic boundaries data including census tracts for the analysis and mapping of demographic information across the United States. City Boundary:City Boundary data is the base map information for the County of Los Angeles. These City Boundaries are based on the Los Angeles County Seamless Cadastral Landbase. The Landbase is jointly maintained by the Los Angeles County Assessor and the Los Angeles County Department of Public Works (DPW). This layer represents current city boundaries within Los Angeles County. The DPW provides the most current shapefiles representing city boundaries and city annexations. True, legal boundaries are only determined on the ground by surveyors licensed in the State of California.Countywide Statistical Areas (CSA): The countywide Statistical Area (CSA) was defined to provide a common geographic boundary for reporting departmental statistics for unincorporated areas and incorporated Los Angeles city to the Board of Supervisors. The CSA boundary and CSA names are established by the CIO and the LA County Enterprise GIS group worked with the Los Angeles County Board of Supervisors Unincorporated Area and Field Deputies that reflect as best as possible the general name preferences of residents and historical names of areas. This data is primarily focused on broad statistics and reporting, not mapping of communities. This data is not designed to perfectly represent communities, nor jurisdictional boundaries such as Angeles National Forest. CSA represent board approved geographies comprised of Census block groups split by cities.Data Field:CT10: 2010 Census tractFIP15: 2015 City FIP CodeCITY: City name for incorporated cities and “Unincorporated” for unincorporated areas (as of July 1, 2015) CT10FIP15: 2010 census tract with 2015 city FIPs for incorporated cities and unincorporated areas. SPA12: 2012 Service Planning Area (SPA) number.SPA_NAME: Service Planning Area name.HD12: 2012 Health District (HD) number: HD_NAME: Health District name.POP15_AGE_0_4: 2015 population 0 to 4 years oldPOP15_AGE_5_9: 2015 population 5 to 9 years old POP15_AGE_10_14: 2015 population 10 to 14 years old POP15_AGE_15_17: 2015 population 15 to 17 years old POP15_AGE_18_19: 2015 population 18 to 19 years old POP15_AGE_20_44: 2015 population 20 to 24 years old POP15_AGE_25_29: 2015 population 25 to 29 years old POP15_AGE_30_34: 2015 population 30 to 34 years old POP15_AGE_35_44: 2015 population 35 to 44 years old POP15_AGE_45_54: 2015 population 45 to 54 years old POP15_AGE_55_64: 2015 population 55 to 64 years old POP15_AGE_65_74: 2015 population 65 to 74 years old POP15_AGE_75_84: 2015 population 75 to 84 years old POP15_AGE_85_100: 2015 population 85 years and older POP15_WHITE: 2015 Non-Hispanic White POP15_BLACK: 2015 Non-Hispanic African AmericanPOP15_AIAN: 2015 Non-Hispanic American Indian or Alaska NativePOP15_ASIAN: 2015 Non-Hispanic Asian POP15_HNPI: 2015 Non-Hispanic Hawaiian Native or Pacific IslanderPOP15_HISPANIC: 2015 HispanicPOP15_MALE: 2015 Male POP15_FEMALE: 2015 Female POV15_WHITE: 2015 Non-Hispanic White below 100% Federal Poverty Level POV15_BLACK: 2015 Non-Hispanic African American below 100% Federal Poverty Level POV15_AIAN: 2015 Non-Hispanic American Indian or Alaska Native below 100% Federal Poverty Level POV15_ASIAN: 2015 Non-Hispanic Asian below 100% Federal Poverty Level POV15_HNPI: 2015 Non-Hispanic Hawaiian Native or Pacific Islander below 100% Federal Poverty Level POV15_HISPANIC: 2015 Hispanic below 100% Federal Poverty Level POV15_TOTAL: 2015 Total population below 100% Federal Poverty Level POP15_TOTAL: 2015 Total PopulationAREA_SQMIL: Area in square milePOP15_DENSITY: Population per square mile.POV15_PERCENT: Poverty rate/percentage.How this data created?The tabular data of population by age groups, by ethnic groups and by gender, and the poverty by ethnic groups is attributed to the split tract geography to create this data. Split tract polygon data is created by intersecting 2010 census tract polygons, LA Country City Boundary polygons and Countywide Statistical Areas (CSA) polygon data. The resulting polygon boundary aligned and matched with the legal city boundary whenever possible. Note:1. Population and poverty data estimated as of July 1, 2015. 2. 2010 Census tract and 2020 census tracts are not the same. Similarly, city and community boundary are not the same because boundary is reviewed and updated annually.
https://www.icpsr.umich.edu/web/ICPSR/studies/36854/termshttps://www.icpsr.umich.edu/web/ICPSR/studies/36854/terms
The American Community Survey (ACS) is an ongoing statistical survey that samples a small percentage of the population every year -- giving communities the information they need to plan investments and services. The 5-year public use microdata sample (PUMS) for 2011-2015 is a subset of the 2011-2011 ACS sample. It contains the same sample as the combined PUMS 1-year files for 2011, 2012, 2013, 2014 and 2015. This data collection provides a person-level subset of 129,895 respondents whose occupations were coded as arts-related in the 2011-2015 ACS PUMS. The 2011-2015 PUMS is the seventh 5-year file published by the ACS. This data collection contains five years of data for the population from households and the group quarters (GQ) population. The GQ population and population from households are all weighted to agree with the ACS counts which are an average over the five year period (2011-2015). The ACS sample was selected from all counties across the nation. The ACS provides social, housing, and economic characteristics for demographic groups covering a broad spectrum of geographic areas in the United States. Demographic variables include sex, age, relationship of person to the selected respondent, race, and Hispanic origin. Social characteristics variables include school enrollment, educational attainment, marital status, fertility, grandparents caring for children, veteran status, type of disability, health insurance, place of birth, United States citizenship status, year of entry, year of naturalization, language spoken at home, and ancestry. Variables focusing on economic characteristics include employment status, commuting to work, occupation, industry, class of worker, income and benefits, and poverty status.
Attribution 4.0 (CC BY 4.0)https://creativecommons.org/licenses/by/4.0/
License information was derived automatically
United States US: Sex Ratio at Birth: Male Births per Female Births data was reported at 1.048 Ratio in 2016. This stayed constant from the previous number of 1.048 Ratio for 2015. United States US: Sex Ratio at Birth: Male Births per Female Births data is updated yearly, averaging 1.048 Ratio from Dec 1962 (Median) to 2016, with 20 observations. The data reached an all-time high of 1.053 Ratio in 1972 and a record low of 1.048 Ratio in 2016. United States US: Sex Ratio at Birth: Male Births per Female Births data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s USA – Table US.World Bank: Population and Urbanization Statistics. Sex ratio at birth refers to male births per female births. The data are 5 year averages.; ; United Nations Population Division. World Population Prospects: 2017 Revision.; Weighted average;
This statistic displays the number of people volunteering in the U.S. from 2011 to 2015, by gender. In 2015, 26.5 million male adults in America had volunteered at least once during the year.
CC0 1.0 Universal Public Domain Dedicationhttps://creativecommons.org/publicdomain/zero/1.0/
License information was derived automatically
Supporting documentation on code lists, subject definitions, data accuracy, and statistical testing can be found on the American Community Survey website in the Data and Documentation section...Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Tell us what you think. Provide feedback to help make American Community Survey data more useful for you..Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, it is the Census Bureau''s Population Estimates Program that produces and disseminates the official estimates of the population for the nation, states, counties, cities and towns and estimates of housing units for states and counties..Explanation of Symbols:An ''**'' entry in the margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate..An ''-'' entry in the estimate column indicates that either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution..An ''-'' following a median estimate means the median falls in the lowest interval of an open-ended distribution..An ''+'' following a median estimate means the median falls in the upper interval of an open-ended distribution..An ''***'' entry in the margin of error column indicates that the median falls in the lowest interval or upper interval of an open-ended distribution. A statistical test is not appropriate..An ''*****'' entry in the margin of error column indicates that the estimate is controlled. A statistical test for sampling variability is not appropriate. .An ''N'' entry in the estimate and margin of error columns indicates that data for this geographic area cannot be displayed because the number of sample cases is too small..An ''(X)'' means that the estimate is not applicable or not available..Estimates of urban and rural population, housing units, and characteristics reflect boundaries of urban areas defined based on Census 2010 data. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..While the 2011-2015 American Community Survey (ACS) data generally reflect the February 2013 Office of Management and Budget (OMB) definitions of metropolitan and micropolitan statistical areas; in certain instances the names, codes, and boundaries of the principal cities shown in ACS tables may differ from the OMB definitions due to differences in the effective dates of the geographic entities..Workers include members of the Armed Forces and civilians who were at work last week..Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted roughly as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables..Source: U.S. Census Bureau, 2011-2015 American Community Survey 5-Year Estimates
https://www.icpsr.umich.edu/web/ICPSR/studies/38848/termshttps://www.icpsr.umich.edu/web/ICPSR/studies/38848/terms
The IPUMS Contextual Determinants of Health (CDOH) data series includes measures of disparities, policies, and counts, by state or county, for historically marginalized populations in the United States including Black, Asian, Hispanic/Latina/o/e/x, and LGBTQ+ persons, and women. The IPUMS CDOH data are made available through ICPSR/DSDR for merging with the National Couples' Health and Time Study (NCHAT), United States, 2020-2021 (ICPSR 38417) by approved restricted data researchers. All other researchers can access the IPUMS CDOH data via the IPUMS CDOH website. Unlike other IPUMS products, the CDOH data are organized into multiple categories related to Race and Ethnicity, Sexual and Gender Minority, Gender, and Politics. The CDOH measures were created from a wide variety of data sources (e.g., IPUMS NHGIS, the Census Bureau, the Bureau of Labor Statistics, the Movement Advancement Project, and Myers Abortion Facility Database). Measures are currently available for states or counties from approximately 2015 to 2020. The Gender measures in this release include the state-level poverty ratio, which compares the proportion of females living in poverty to the proportion of males living in poverty in a given state in a given year. To work with the IPUMS CDOH data, researchers will need to first merge the NCHAT data to DS1 (MATCH ID and State FIPS Data). This merged file can then be linked to the IPUMS CDOH datafile (DS2) using the STATEFIPS variable.
CC0 1.0 Universal Public Domain Dedicationhttps://creativecommons.org/publicdomain/zero/1.0/
License information was derived automatically
Supporting documentation on code lists, subject definitions, data accuracy, and statistical testing can be found on the American Community Survey website in the Data and Documentation section...Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Tell us what you think. Provide feedback to help make American Community Survey data more useful for you..Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, it is the Census Bureau''s Population Estimates Program that produces and disseminates the official estimates of the population for the nation, states, counties, cities and towns and estimates of housing units for states and counties..Explanation of Symbols:An ''**'' entry in the margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate..An ''-'' entry in the estimate column indicates that either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution..An ''-'' following a median estimate means the median falls in the lowest interval of an open-ended distribution..An ''+'' following a median estimate means the median falls in the upper interval of an open-ended distribution..An ''***'' entry in the margin of error column indicates that the median falls in the lowest interval or upper interval of an open-ended distribution. A statistical test is not appropriate..An ''*****'' entry in the margin of error column indicates that the estimate is controlled. A statistical test for sampling variability is not appropriate. .An ''N'' entry in the estimate and margin of error columns indicates that data for this geographic area cannot be displayed because the number of sample cases is too small..An ''(X)'' means that the estimate is not applicable or not available..Estimates of urban and rural population, housing units, and characteristics reflect boundaries of urban areas defined based on Census 2010 data. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..While the 2011-2015 American Community Survey (ACS) data generally reflect the February 2013 Office of Management and Budget (OMB) definitions of metropolitan and micropolitan statistical areas; in certain instances the names, codes, and boundaries of the principal cities shown in ACS tables may differ from the OMB definitions due to differences in the effective dates of the geographic entities..Workers include members of the Armed Forces and civilians who were at work last week..Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted roughly as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables..Source: U.S. Census Bureau, 2011-2015 American Community Survey 5-Year Estimates
https://creativecommons.org/publicdomain/zero/1.0/https://creativecommons.org/publicdomain/zero/1.0/
This dataset expands on my earlier New York City Census Data dataset. It includes data from the entire country instead of just New York City. The expanded data will allow for much more interesting analyses and will also be much more useful at supporting other data sets.
The data here are taken from the DP03 and DP05 tables of the 2015 American Community Survey 5-year estimates. The full datasets and much more can be found at the American Factfinder website. Currently, I include two data files:
The two files have the same structure, with just a small difference in the name of the id column. Counties are political subdivisions, and the boundaries of some have been set for centuries. Census tracts, however, are defined by the census bureau and will have a much more consistent size. A typical census tract has around 5000 or so residents.
The Census Bureau updates the estimates approximately every year. At least some of the 2016 data is already available, so I will likely update this in the near future.
The data here were collected by the US Census Bureau. As a product of the US federal government, this is not subject to copyright within the US.
There are many questions that we could try to answer with the data here. Can we predict things such as the state (classification) or household income (regression)? What kinds of clusters can we find in the data? What other datasets can be improved by the addition of census data?
CC0 1.0 Universal Public Domain Dedicationhttps://creativecommons.org/publicdomain/zero/1.0/
License information was derived automatically
Supporting documentation on code lists, subject definitions, data accuracy, and statistical testing can be found on the American Community Survey website in the Data and Documentation section...Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Tell us what you think. Provide feedback to help make American Community Survey data more useful for you..Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, it is the Census Bureau''s Population Estimates Program that produces and disseminates the official estimates of the population for the nation, states, counties, cities and towns and estimates of housing units for states and counties..Explanation of Symbols:An ''**'' entry in the margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate..An ''-'' entry in the estimate column indicates that either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution..An ''-'' following a median estimate means the median falls in the lowest interval of an open-ended distribution..An ''+'' following a median estimate means the median falls in the upper interval of an open-ended distribution..An ''***'' entry in the margin of error column indicates that the median falls in the lowest interval or upper interval of an open-ended distribution. A statistical test is not appropriate..An ''*****'' entry in the margin of error column indicates that the estimate is controlled. A statistical test for sampling variability is not appropriate. .An ''N'' entry in the estimate and margin of error columns indicates that data for this geographic area cannot be displayed because the number of sample cases is too small..An ''(X)'' means that the estimate is not applicable or not available..Estimates of urban and rural population, housing units, and characteristics reflect boundaries of urban areas defined based on Census 2010 data. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..While the 2011-2015 American Community Survey (ACS) data generally reflect the February 2013 Office of Management and Budget (OMB) definitions of metropolitan and micropolitan statistical areas; in certain instances the names, codes, and boundaries of the principal cities shown in ACS tables may differ from the OMB definitions due to differences in the effective dates of the geographic entities..The child dependency ratio is derived by dividing the population under 18 by the 18-to-64 population and multiplying by 100..The old-age dependency ratio is derived by dividing the population 65 and over by the 18-to-64 population and multiplying by 100..The age dependency ratio is derived by dividing the combined under-18 and 65-and-over populations by the 18-to-64 population and multiplying by 100..Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted roughly as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables..Source: U.S. Census Bureau, 2011-2015 American Community Survey 5-Year Estimates
US Census American Community Survey (ACS) 2015, 5-year estimates of the key demographic characteristics of Census Tracts geographic level in Orange County, California. The data contains 105 fields for the variable groups D01: Sex and age (universe: total population, table X1, 49 fields); D02: Median age by sex and race (universe: total population, table X1, 12 fields); D03: Race (universe: total population, table X2, 8 fields); D04: Race alone or in combination with one or more other races (universe: total population, table X2, 7 fields); D05: Hispanic or Latino and race (universe: total population, table X3, 21 fields), and; D06: Citizen voting age population (universe: citizen, 18 and over, table X5, 8 fields). The US Census geodemographic data are based on the 2015 TigerLines across multiple geographies. The spatial geographies were merged with ACS data tables. See full documentation at the OCACS project github page (https://github.com/ktalexan/OCACS-Geodemographics).
CC0 1.0 Universal Public Domain Dedicationhttps://creativecommons.org/publicdomain/zero/1.0/
License information was derived automatically
Supporting documentation on code lists, subject definitions, data accuracy, and statistical testing can be found on the American Community Survey website in the Data and Documentation section...Sample size and data quality measures (including coverage rates, allocation rates, and response rates) can be found on the American Community Survey website in the Methodology section..Tell us what you think. Provide feedback to help make American Community Survey data more useful for you..Although the American Community Survey (ACS) produces population, demographic and housing unit estimates, it is the Census Bureau''s Population Estimates Program that produces and disseminates the official estimates of the population for the nation, states, counties, cities and towns and estimates of housing units for states and counties..Explanation of Symbols:An ''**'' entry in the margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate..An ''-'' entry in the estimate column indicates that either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution..An ''-'' following a median estimate means the median falls in the lowest interval of an open-ended distribution..An ''+'' following a median estimate means the median falls in the upper interval of an open-ended distribution..An ''***'' entry in the margin of error column indicates that the median falls in the lowest interval or upper interval of an open-ended distribution. A statistical test is not appropriate..An ''*****'' entry in the margin of error column indicates that the estimate is controlled. A statistical test for sampling variability is not appropriate. .An ''N'' entry in the estimate and margin of error columns indicates that data for this geographic area cannot be displayed because the number of sample cases is too small..An ''(X)'' means that the estimate is not applicable or not available..Estimates of urban and rural population, housing units, and characteristics reflect boundaries of urban areas defined based on Census 2010 data. As a result, data for urban and rural areas from the ACS do not necessarily reflect the results of ongoing urbanization..While the 2011-2015 American Community Survey (ACS) data generally reflect the February 2013 Office of Management and Budget (OMB) definitions of metropolitan and micropolitan statistical areas; in certain instances the names, codes, and boundaries of the principal cities shown in ACS tables may differ from the OMB definitions due to differences in the effective dates of the geographic entities..When information is missing or inconsistent, the Census Bureau uses a method called imputation to assign values. Responses assigned using the Census Bureau's imputation method are called imputed values. The "Percent Imputed" section is the percent of respondents who received an imputed value for a particular subject. ..Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted roughly as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables..Source: U.S. Census Bureau, 2011-2015 American Community Survey 5-Year Estimates
In terms of population size, the sex ratio in the United States favors females, although the gender gap is remaining stable. In 2010, there were around 5.17 million more women, with the difference projected to decrease to around 3 million by 2027.
Gender ratios by U.S. state In the United States, the resident population was estimated to be around 331.89 million in 2021. The gender distribution of the nation has remained steady for several years, with women accounting for approximately 51.1 percent of the population since 2013. Females outnumbered males in the majority of states across the country in 2020, and there were eleven states where the gender ratio favored men.
Metro areas by population National differences between male and female populations can also be analyzed by metropolitan areas. In general, a metropolitan area is a region with a main city at its center and adjacent communities that are all connected by social and economic factors. The largest metro areas in the U.S. are New York, Los Angeles, and Chicago. In 2019, there were more women than men in all three of those areas, but Jackson, Missouri was the metro area with the highest share of female population.