Wilderness areas are federally-owned public lands managed by the federal government through four agencies, the Bureau of Land Management, Fish and Wildlife Service, Forest Service, and National Park Service. When the National Wilderness Preservation System started in 1964, only 54 wilderness areas were included. Since then, the system has grown nearly every year to include more than 800. The time component of this service is based on the year in which the wilderness was originally designated (additions may have occurred in subsequent years). Overall, however, only about 5% of the entire United States—an area slightly larger than the state of California— is protected as wilderness. Because Alaska contains just over half of America's wilderness, only about 2.7% of the contiguous United States—an area about the size of Minnesota—is protected as wilderness. To learn more about wilderness areas, visit Wilderness Connect, the authoritative source for wilderness information online. Wilderness Connect also publishes two other map resources:An interactive wilderness map allows visitors to search for and explore all wilderness areas in the United States. Fact-filled storymaps on the benefits of wilderness illustrate how wilderness protects values including clean water, wildlife habitat, nearby recreation, cultural sites and more.

Although wilderness areas are federally-owned, some areas contain non-federal parcels within their boundaries. Non-federal lands within some wilderness areas are included as part of this feature dataset as a separate layer. Termed inholdings or edgeholdings, these lands are privately-owned or owned by local governments, state governments or Indigenous Nations. Hundreds of inholdings and edgeholdings exist across the wilderness system. Generally, however, they are small compared to the size of the wilderness itself. Since the rules and regulations that apply to wilderness areas do not apply to these non-federally-owned parcels, it is important for wilderness visitors to know their location to avoid trespassing where access is not allowed. The owners of inholdings and edgeholdings can develop these parcels (as long as developments do not affect the character of the surrounding wilderness lands) and they retain special and limited access to them, sometimes, but not always, by motorized means.

A parcel of Forest Service land congressionally designated as wilderness such as National Wilderness Area. Click this link for full metadata description: Metadata

Feature Class for the BLM Wilderness Areas and BLM Other Related Lands data covered by the National Landscape Conservation System (NLCS) Data Standard. In particular, this feature class includes the polygon features representing the spatial extent and boundaries of the BLM National Landscape Conservation System (NLCS) Wilderness Areas. A Wilderness is a special place where the earth and its community of life are essentially undisturbed; they retain a primeval character, without permanent improvements and generally appear to have been affected primarily by the forces of nature. In 1964, Congress established the National Wilderness Preservation System and designated the first Wilderness Areas in passing the Wilderness Act. The uniquely American idea of wilderness has become an increasingly significant tool to ensure long-term protection of natural landscapes. Wilderness protects the habitat of numerous wildlife species and serves as a biodiversity bank for many species of plants and animals. Wilderness is also a source of clean water. The Federal Land Policy and Management Act of 1976 directed the Bureau to inventory and study its roadless areas for wilderness characteristics. To be designated as a Wilderness Study Area, an area has to have the following characteristics: Size - roadless areas of at least 5,000 acres of public lands or of a manageable size; Naturalness - generally appears to have been affected primarily by the forces of nature; Opportunities - provides outstanding opportunities for solitude or primitive and unconfined types of recreation. In addition, Wilderness Study Areas often have special qualities such as ecological, geological, educational, historical, scientific and scenic values. BLM National Landscape Conservation System (NLCS) Other Related Lands are lands not in Wilderness or Wilderness Study Areas that have been determined to have wilderness character through inventory or land use planning. These lands fall into one of two categories. The first category are lands with "wilderness value and characteristics". These are inventoried areas not in Wilderness or Wilderness Study Areas that have been determined to meet the size, naturalness, and the outstanding solitude and/or the outstanding primitive and unconfined recreation criteria. The second category are "wilderness characteristic protection areas". These are former lands with "wilderness value and characteristics" where a plan decision has been made to protect them. This dataset is a subset of the official national dataset, containing features and attributes intended for public release and has been optimized for online map service performance.

This data set consists of National Wilderness Preservation System areas around Jackson County. The data set was created by extracting these wilderness areas from the National Atlas map layer: Federal Lands and Indian Reservations of the United States. This is a revised version of the October, 2003 data set.

This data layer consists of National Wilderness Preservation System areas in the United States, Puerto Rico, and the U.S. Virgin Islands. The map layer was created by combining the best available data from the federal agency responsible for administration of a given wilderness area. Where larger scale data could not be obtained the National Atlas layer 'National Wilderness Preservation System 'was used as the data source. In its present form source data varies from a scale of 1:10000 to 1:2,000,000 (see lineage for details on source scale).

This dataset includes the polygon features representing the spatial extent and boundaries of the Bureau of Land Management (BLM) National Landscape Conservation System (NLCS) Wilderness Areas (WLD), Wilderness Study Areas (WSA), and Other Related Lands with wilderness characteristics (LWC) or managed for wilderness characteristics (MWC).The data standard for these boundaries will assist in the management of all eleven designations within the NLCS. Particularly, NLCS data pertains to the following BLM groups and their purposes: Land Use Planners, GIS Specialists, NLCS team leads, BLM managers, and public stakeholder groups.As early as 1926, the earliest advocates of wilderness preservation had acknowledged the beauty and important ecological values of the desert lands under the BLM’s administration as candidates for wilderness protection. In 1964, Congress established the National Wilderness Preservation System and designated the first Wilderness Areas in passing the Wilderness Act. The uniquely American idea of wilderness has become an increasingly significant tool to ensure long-term protection of natural landscapes. Wilderness protects the habitat of numerous wildlife species and serves as a biodiversity bank for many species of plants and animals. Wilderness is also a source of clean water.The Federal Land Policy and Management Act of 1976 directed the BLM to inventory and study its roadless areas for wilderness characteristics. Here identified areas became WSAs. The establishment of a WSA served to identify areas for Congress to consider for addition to the National Wilderness Preservation System. To be designated as a WSA, an area must have the following characteristics: Size - roadless areas of at least 5,000 acres of public lands or of a manageable size; Naturalness - generally appears to have been affected primarily by the forces of nature; Opportunities - provides outstanding opportunities for solitude or primitive and unconfined types of recreation. In addition, WSAs often have special qualities such as ecological, geological, educational, historical, scientific and scenic values.In June 2000, the BLM responded to growing concern over the loss of open space by creating the NLCS. The NLCS brings into a single system some of the BLM's premier designations. The Wilderness Areas, WSAs, and Other Related Lands represent three of these eleven premier designations. By putting these lands into an organized system, the BLM hopes to increase public awareness of these areas' scientific, cultural, educational, ecological and other values.The BLM's management of all public lands included data within the NLCS is guided by the Federal Land Policy and Management Act (FLPMA). FLPMA ensures that many of BLM's traditional activities such as grazing and hunting, continue on the lands within the NLCS, provided these activities are consistent with the overall purpose of the area.A Wilderness is a special place where the earth and its community of life are essentially undisturbed; they retain a primeval character, without permanent improvements and generally appear to have been affected primarily by the forces of nature. BLM NLCS Other Related Lands are lands not in Wilderness or WSAs that have been determined to have wilderness character through inventory or land use planning. These lands fall into one of two categories. The first category are lands with "wilderness value and characteristics". These are inventoried areas not in Wilderness or WSAs that have been determined to meet the size, naturalness, and the outstanding solitude and/or the outstanding primitive and unconfined recreation criteria. The second category are "wilderness characteristic protection areas". These are former lands with "wilderness value and characteristics" where a plan decision has been made to protect them.To be designated as a WSA, an area must have the following characteristics: Size - roadless areas of at least 5,000 acres of public lands or of a manageable size; Naturalness - generally appears to have been affected primarily by the forces of nature; Opportunities - provides outstanding opportunities for solitude or primitive and unconfined types of recreation. In addition, WSAs often have special qualities such as ecological, geological, educational, historical, scientific and scenic values.There were forty-seven Wilderness Areas established under the Arizona Wilderness Act of 1984 and Arizona Desert Wilderness Act of 1990. These Acts require the BLM to file boundary legal descriptions and maps to Congress for each Wilderness Area. The standards, format, and language for the legal descriptions and boundary maps were developed during regular meetings of the NLCS Coordinator, GIS specialists and the Cadastral Surveyors. Guidance was provided from congressionally-required map and legal boundary descriptions detailed in the NLCS Designation Manual 6120 (March, 2010). All Arizona BLM Wilderness Area boundary legal descriptions and maps have been transmitted to Congress and certified by the Chief of Cadastral Survey and Arizona State Director. There should be no changes to Wilderness Boundary GIS data. Boundary changes can only be made through an amendment to the legal description and this would need to be sent back to Congress.

This dataset is meant to depict wilderness areas within the state of New Mexico managed by the Bureau of Land Management These wilderness areas are officially designated by the U.S. Congress. Data was collected by the U.S. Bureau of Land Management (BLM), New Mexico State Office.

(Link to Metadata) A parcel of Forest Service land congressionally designated as wilderness such as National Wilderness Area.

This feature layer consists of two layers: Class I Wilderness areas and Class II Wilderness areas. The Clean Air Act established Federal Class I areas in each national park over 6,000 acres and each national wilderness larger than 5,000 acres that were in existence as of August 7, 1977, the date of the Act amendment. These are areas where the Administrator, in consultation with the Secretary of the Interior, determined visibility to be an important value. These geographic areas are designated for the most stringent degree of protection from future degradation of air quality. The National Park Service, Fish and Wildlife Service, and Forest Service are the three federal land managers of Class I areas.The data from both layers come from a map service depicting status of parcels for Forest Service land congressionally designated as wilderness such as National Wilderness Areas. All data is from National Datasets from USDA Forest Service, available on the FSGeodata Clearinghouse website: https://data.fs.usda.gov/geodata/.

Important Note: This item is in mature support as of June 2024 and will be retired in December 2026. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version.In the United States, areas that are protected from development and managed for biodiversity conservation include Wilderness Areas, National Parks, National Wildlife Refuges, and Wild & Scenic Rivers. Understanding the geographic distribution of these protected areas and their level of protection is an important part of landscape-scale planning. The Protected Areas Database of the United States classifies lands into four GAP Status classes. This layer displays the two highest levels of protection GAP Status 1 and 2. These two classes are commonly referred to as protected areas.Dataset SummaryPhenomenon Mapped: Areas protected from development and managed to maintain biodiversity (GAP Status 1 and 2)Units: MetersCell Size: 30.92208102 metersSource Type: ThematicPixel Type: 8-bit unsigned integerData Coordinate System: WGS 1984Mosaic Projection: Web Mercator Auxiliary SphereExtent: 50 United States plus Puerto Rico, the US Virgin Islands, Guam, Northern Mariana Islands and American Samoa.Source: USGS National Gap Analysis Program PAD-US version 3.0Publication Date: July 2022ArcGIS Server URL: https://landscape10.arcgis.com/arcgis/This layer displays protected areas from the Protected Areas Database of the United States version 3.0 created by the USGS National Gap Analysis Program. This layer displays GAP Status 1, areas managed for biodiversity where natural disturbances are allowed to proceed or are mimicked by management, and GAP Status 2, areas managed for biodiversity where natural disturbance is suppressed. The source data for this layer are available here. A feature layer published from this dataset is also available. The polygon vector layer was converted to raster layers using the Polygon to Raster Tool using the National Elevation Dataset 1 arc second product as a snap raster.The service behind this layer was published with 8 functions allowing the user to select different views of the service. Other layers created from this service using functions include:USA Protected from Land Cover ConversionUSA Unprotected AreasUSA Protected Areas - Gap Status 1-4USA Protected Areas - Gap Status 1USA Protected Areas - Gap Status 2USA Protected Areas - Gap Status 3USA Protected Areas - Gap Status 4What can you do with this Layer? This layer is suitable for both visualization and analysis across the ArcGIS system. This layer can be combined with your data and other layers from the ArcGIS Living Atlas of the World in ArcGIS Online and ArcGIS Pro to create powerful web maps that can be used alone or in a story map or other application.Because this layer is part of the ArcGIS Living Atlas of the World it is easy to add to your map:In ArcGIS Online, you can add this layer to a map by selecting Add then Browse Living Atlas Layers. A window will open. Type "Protected Areas" in the search box and browse to the layer. Select the layer then click Add to Map.In ArcGIS Pro, open a map and select Add Data from the Map Tab. Select Data at the top of the drop down menu. The Add Data dialog box will open on the left side of the box, expand Portal if necessary, then select Living Atlas. Type "Protected Areas" in the search box, browse to the layer then click OK.In ArcGIS Pro you can use the built-in raster functions to create custom extracts of the data. Imagery layers provide fast, powerful inputs to geoprocessing tools, models, or Python scripts in Pro.The ArcGIS Living Atlas of the World provides an easy way to explore many other beautiful and authoritative maps on hundreds of topics like this one.

This data layer depicts the Designated Wilderness and Proposed Wilderness placed upon the lands and waters administered by the U.S. Fish and Wildlife Service (USFWS) in North America, U.S. Trust Territories and Possessions. Only the U.S. Congress can designate Wilderness. The Service establishes Proposed Wilderness administratively. The primary source for this information is the USFWS Wilderness program.

Important Note: This item is in mature support as of September 2023 and will be retired in December 2025. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version.The USGS Protected Areas Database of the United States (PAD-US) is the official inventory of public parks and other protected open space. The spatial data in PAD-US represents public lands held in trust by thousands of national, state and regional/local governments, as well as non-profit conservation organizations.GAP 1 and 2 areas are primarily managed for biodiversity, GAP 3 are managed for multiple uses including conservation and extraction, GAP 4 no known mandate for biodiversity protection. Provides a general overview of protection status including management designations. PAD-US is published by the U.S. Geological Survey (USGS) Science Analytics and Synthesis (SAS), Gap Analysis Project (GAP). GAP produces data and tools that help meet critical national challenges such as biodiversity conservation, recreation, public health, climate change adaptation, and infrastructure investment. See the GAP webpage for more information about GAP and other GAP data including species and land cover.The USGS Protected Areas Database of the United States (PAD-US) classifies lands into four GAP Status classes:GAP Status 1 - Areas managed for biodiversity where natural disturbances are allowed to proceedGAP Status 2 - Areas managed for biodiversity where natural disturbance is suppressedGAP Status 3 - Areas protected from land cover conversion but subject to extractive uses such as logging and miningGAP Status 4 - Areas with no known mandate for protectionIn the United States, areas that are protected from development and managed for biodiversity conservation include Wilderness Areas, National Parks, National Wildlife Refuges, and Wild & Scenic Rivers. Understanding the geographic distribution of these protected areas and their level of protection is an important part of landscape-scale planning. Dataset SummaryPhenomenon Mapped: Areas protected from development and managed to maintain biodiversity Coordinate System: Web Mercator Auxiliary SphereExtent: 50 United States plus Puerto Rico, the US Virgin Islands, the Northern Mariana Islands and other Pacific Ocean IslandsVisible Scale: 1:1,000,000 and largerSource: USGS Science Analytics and Synthesis (SAS), Gap Analysis Project (GAP) PAD-US version 3.0Publication Date: July 2022Attributes included in this layer are: CategoryOwner TypeOwner NameLocal OwnerManager TypeManager NameLocal ManagerDesignation TypeLocal DesignationUnit NameLocal NameSourcePublic AccessGAP Status - Status 1, 2, or 3GAP Status DescriptionInternational Union for Conservation of Nature (IUCN) Description - I: Strict Nature Reserve, II: National Park, III: Natural Monument or Feature, IV: Habitat/Species Management Area, V: Protected Landscape/Seascape, VI: Protected area with sustainable use of natural resources, Other conservation area, UnassignedDate of EstablishmentThe source data for this layer are available here. What can you do with this Feature Layer?Feature layers work throughout the ArcGIS system. Generally your work flow with feature layers will begin in ArcGIS Online or ArcGIS Pro. Below are just a few of the things you can do with a feature service in Online and Pro.ArcGIS OnlineAdd this layer to a map in the map viewer. The layer is limited to scales of approximately 1:1,000,000 or larger but a vector tile layer created from the same data can be used at smaller scales to produce a webmap that displays across the full range of scales. The layer or a map containing it can be used in an application.Change the layer’s transparency and set its visibility rangeOpen the layer’s attribute table and make selections and apply filters. Selections made in the map or table are reflected in the other. Center on selection allows you to zoom to features selected in the map or table and show selected records allows you to view the selected records in the table.Change the layer’s style and filter the data. For example, you could set a filter for Gap Status Code = 3 to create a map of only the GAP Status 3 areas.Add labels and set their propertiesCustomize the pop-upArcGIS ProAdd this layer to a 2d or 3d map. The same scale limit as Online applies in ProUse as an input to geoprocessing. For example, copy features allows you to select then export portions of the data to a new feature class. Note that many features in the PAD-US database overlap. For example wilderness area designations overlap US Forest Service and other federal lands. Any analysis should take this into consideration. An imagery layer created from the same data set can be used for geoprocessing analysis with larger extents and eliminates some of the complications arising from overlapping polygons.Change the symbology and the attribute field used to symbolize the dataOpen table and make interactive selections with the mapModify the pop-upsApply Definition Queries to create sub-sets of the layerThis layer is part of the Living Atlas of the World that provides an easy way to explore the landscape layers and many other beautiful and authoritative maps on hundreds of topics.

The Terrestrial 30x30 Conserved Areas map layer was developed by the CA Nature working group, providing a statewide perspective on areas managed for the protection or enhancement of biodiversity. Understanding the spatial distribution and extent of these durably protected and managed areas is a vital aspect of tracking and achieving the “30x30” goal of conserving 30% of California's lands and waters by 2030.Terrestrial and Freshwater Data• The California Protected Areas Database (CPAD), developed and managed by GreenInfo Network, is the most comprehensive collection of data on open space in California. CPAD data consists of Holdings, a single parcel or small group of parcels, such that the spatial features of CPAD correspond to ownership boundaries. • The California Conservation Easement Database (CCED), managed by GreenInfo Network, aggregates data on lands with easements. Conservation Easements are legally recorded interests in land in which a landholder sells or relinquishes certain development rights to their land in perpetuity. Easements are often used to ensure that lands remain as open space, either as working farm or ranch lands, or areas for biodiversity protection. Easement restrictions typically remain with the land through changes in ownership. • The Protected Areas Database of the United States (PAD-US), hosted by the United States Geological Survey (USGS), is developed in coordination with multiple federal, state, and non-governmental organization (NGO) partners. PAD-US, through the Gap Analysis Project (GAP), uses a numerical coding system in which GAP codes 1 and 2 correspond to management strategies with explicit emphasis on protection and enhancement of biodiversity. PAD-US is not specifically aligned to parcel boundaries and as such, boundaries represented within it may not align with other data sources. • Numerous datasets representing designated boundaries for entities such as National Parks and Monuments, Wild and Scenic Rivers, Wilderness Areas, and others, were downloaded from publicly available sources, typically hosted by the managing agency.Methodology1. CPAD and CCED represent the most accurate location and ownership information for parcels in California which contribute to the preservation of open space and cultural and biological resources.2. Superunits are collections of parcels (Holdings) within CPAD which share a name, manager, and access policy. Most Superunits are also managed with a generally consistent strategy for biodiversity conservation. Examples of Superunits include Yosemite National Park, Giant Sequoia National Monument, and Anza-Borrego Desert State Park. 3. Some Superunits, such as those owned and managed by the Bureau of Land Management, U.S. Forest Service, or National Park Service , are intersected by one or more designations, each of which may have a distinct management emphasis with regards to biodiversity. Examples of such designations are Wilderness Areas, Wild and Scenic Rivers, or National Monuments.4. CPAD Superunits and CCED easements were intersected with all designation boundary files to create the operative spatial units for conservation analysis, henceforth 'Conservation Units,' which make up the Terrestrial 30x30 Conserved Areas map layer. Each easement was functionally considered to be a Superunit. 5. Each Conservation Unit was intersected with the PAD-US dataset in order to determine the management emphasis with respect to biodiversity, i.e., the GAP code. Because PAD-US is national in scope and not specifically parcel aligned with California assessors' surveys, a direct spatial extraction of GAP codes from PAD-US would leave tens of thousands of GAP code data slivers within the 30x30 Conserved Areas map. Consequently, a generalizing approach was adopted, such that any Conservation Unit with greater than 80% areal overlap with a single GAP code was uniformly assigned that code. Additionally, the total area of GAP codes 1 and 2 were summed for the remaining uncoded Conservation Units. If this sum was greater than 80% of the unit area, the Conservation Unit was coded as GAP 2. 6. Subsequent to this stage of analysis, certain Conservation Units remained uncoded, either due to the lack of a single GAP code (or combined GAP codes 1&2) overlapping 80% of the area, or because the area was not sufficiently represented in the PAD-US dataset. 7. These uncoded Conservation Units were then broken down into their constituent, finer resolution Holdings, which were then analyzed according to the above workflow. 8. Areas remaining uncoded following the two-step process of coding at the Superunit and then Holding levels were assigned a GAP code of 4. This is consistent with the definition of GAP Code 4: areas unknown to have a biodiversity management focus. 9. Greater than 90% of all areas in the Terrestrial 30x30 Conserved Areas map layer were GAP coded at the level of CPAD Superunits intersected by designation boundaries, the coarsest land units of analysis. By adopting these coarser analytical units, the Terrestrial 30X30 Conserved Areas map layer avoids hundreds of thousands of spatial slivers that result from intersecting designations with smaller, more numerous parcel records. In most cases, individual parcels reflect the management scenario and GAP status of the umbrella Superunit and other spatially coincident designations.Tracking Conserved AreasThe total acreage of conserved areas will increase as California works towards its 30x30 goal. Some changes will be due to shifts in legal protection designations or management status of specific lands and waters. However, shifts may also result from new data representing improvements in our understanding of existing biodiversity conservation efforts. The California Nature Project is expected to generate a great deal of excitement regarding the state's trajectory towards achieving the 30x30 goal. We also expect it to spark discussion about how to shape that trajectory, and how to strategize and optimize outcomes. We encourage landowners, managers, and stakeholders to investigate how their lands are represented in the Terrestrial 30X30 Conserved Areas Map Layer. This can be accomplished by using the Conserved Areas Explorer web application, developed by the CA Nature working group. Users can zoom into the locations they understand best and share their expertise with us to improve the data representing the status of conservation efforts at these sites. The Conserved Areas Explorer presents a tremendous opportunity to strengthen our existing data infrastructure and the channels of communication between land stewards and data curators, encouraging the transfer of knowledge and improving the quality of data. CPAD, CCED, and PAD-US are built from the ground up. Data is derived from available parcel information and submissions from those who own and manage the land. So better data starts with you. Do boundary lines require updating? Is the GAP code inconsistent with a Holding’s conservation status? If land under your care can be better represented in the Terrestrial 30X30 Conserved Areas map layer, please use this link to initiate a review. The results of these reviews will inform updates to the California Protected Areas Database, California Conservation Easement Database, and PAD-US as appropriate for incorporation into future updates to CA Nature and tracking progress to 30x30.

Wildlands in New England is the first U.S. study to map and characterize within one region all conserved lands that, by design, allow natural processes to unfold with no active management or intervention. These “forever wild lands” include federal Wilderness areas along with diverse public and private natural areas and reserves. Knowing the precise locations of Wildlands, their characteristics, and their protection status is important as both a baseline for advancing conservation initiatives and an urgent call to action for supporting nature and society. Wildlands play a unique role in the integrated approach to conservation and land planning advanced by the Wildlands, Woodlands, Farmlands & Communities (WWF&C) initiative, which calls for: at least 70 percent of the region to be protected forest; Wildlands to occupy at least 10 percent of the land; and all existing farmland to be permanently conserved. This research was conducted by WWF&C partners Harvard Forest (Harvard University), Highstead Foundation, and Northeast Wilderness Trust, in collaboration with over one hundred conservation organizations and municipal, state, and federal agencies. This dataset contains the Geographical Information System (GIS) polygon layer of Wildlands created by this project and used in all analyses for the 2023 report. Another GIS layer will be updated as new Wildlands are brought to our attention or created and will be available at https://wildlandsandwoodlands.org/ for researchers.

A map service depicting parcels of Forest Service land congressionally designated as wilderness such as National Wilderness Areas. This map service provides display, identification, and analysis tools for determining current boundary information for Forest Service managers, GIS Specialists, and others. The map service uses a File Geodatabase data source with Web Mercator projection.�Metadata and Downloads

This web map created by the Colorado Governor's Office of Information Technology GIS team, serves as a basemap specific to the state of Colorado. The basemap includes general layers such as counties, municipalities, roads, waterbodies, state parks, national forests, national wilderness areas, and trails.Layers:Layer descriptions and sources can be found below. Layers have been modified to only represent features within Colorado and are not up to date. Layers last updated February 23, 2023. Colorado State Extent: Description: “This layer provides generalized boundaries for the 50 States and the District of Columbia.” Notes: This layer was filtered to only include the State of ColoradoSource: Esri Living Atlas USA States Generalized Boundaries Feature LayerState Wildlife Areas:Description: “This data was created by the CPW GIS Unit. Property boundaries are created by dissolving CDOWParcels by the property name, and property type and appending State Park boundaries designated as having public access. All parcel data correspond to legal transactions made by the CPW Real Estate Unit. The boundaries of the CDOW Parcels were digitized using metes and bounds, BLM's GCDB dataset, the PLSS dataset (where the GCDB dataset was unavailable) and using existing digital data on the boundaries.” Notes: The state wildlife areas layer in this basemap is filtered from the CPW Managed Properties (public access only) layer from this feature layer hosted in ArcGIS Online Source: Colorado Parks and Wildlife CPW Admin Data Feature LayerMunicipal Boundaries:Description: "Boundaries data from the State Demography Office of Colorado Municipalities provided by the Department of Local Affairs (DOLA)"Source: Colorado Information Marketplace Municipal Boundaries in ColoradoCounties:Description: “This layer presents the USA 2020 Census County (or County Equivalent) boundaries of the United States in the 50 states and the District of Columbia. It is updated annually as County (or County Equivalent) boundaries change. The geography is sources from US Census Bureau 2020 TIGER FGDB (National Sub-State) and edited using TIGER Hydrology to add a detailed coastline for cartographic purposes. Geography last updated May 2022.” Notes: This layer was filtered to only include counties in the State of ColoradoSource: Esri USA Census Counties Feature LayerInterstates:Description: Authoritative data from the Colorado Department of Transportation representing Highways Notes: Interstates are filtered by route sign from this CDOT Highways layer Source: Colorado Department of Transportation Highways REST EndpointU.S. Highways:Description: Authoritative data from the Colorado Department of Transportation representing Highways Notes: U.S. Highways are filtered by route sign from this CDOT Highways layer Source: Colorado Department of Transportation Highways REST EndpointState Highways:Description: Authoritative data from the Colorado Department of Transportation representing Highways Notes: State Highways are filtered by route sign from this CDOT Highways layer Source: Colorado Department of Transportation Highways REST EndpointMajor Roads:Description: Authoritative data from the Colorado Department of Transportation representing major roads Source: Colorado Department of Transportation Major Roads REST EndpointLocal Roads:Description: Authoritative data from the Colorado Department of Transportation representing local roads Source: Colorado Department of Transportation Local Roads REST EndpointRail Lines:Description: Authoritative data from the Colorado Department of Transportation representing rail lines Source: Colorado Department of Transportation Rail Lines REST EndpointCOTREX Trails:Description: “The Colorado Trail System, now titled the Colorado Trail Explorer (COTREX), endeavors to map every trail in the state of Colorado. Currently their are nearly 40,000 miles of trails mapped. Trails come from a variety of sources (USFS, BLM, local parks & recreation departments, local governments). Responsibility for accuracy of the data rests with the source.These data were last updated on 2/5/2019” Source: Colorado Parks and Wildlife CPW Admin Data Feature LayerNHD Waterbodies:Description: “The National Hydrography Dataset Plus (NHDplus) maps the lakes, ponds, streams, rivers and other surface waters of the United States. Created by the US EPA Office of Water and the US Geological Survey, the NHDPlus provides mean annual and monthly flow estimates for rivers and streams. Additional attributes provide connections between features facilitating complicated analyses.”Notes: This layer was filtered to only include waterbodies in the State of ColoradoSource: National Hydrography Dataset Plus Version 2.1 Feature LayerNHD Flowlines:Description: “The National Hydrography Dataset Plus (NHDplus) maps the lakes, ponds, streams, rivers and other surface waters of the United States. Created by the US EPA Office of Water and the US Geological Survey, the NHDPlus provides mean annual and monthly flow estimates for rivers and streams. Additional attributes provide connections between features facilitating complicated analyses.”Notes: This layer was filtered to only include flowline features in the State of ColoradoSource: National Hydrography Dataset Plus Version 2.1 Feature LayerState Parks:Description: “This data was created by the CPW GIS Unit. Property boundaries are created by dissolving CDOWParcels by the property name, and property type and appending State Park boundaries designated as having public access. All parcel data correspond to legal transactions made by the CPW Real Estate Unit. The boundaries of the CDOW Parcels were digitized using metes and bounds, BLM's GCDB dataset, the PLSS dataset (where the GCDB dataset was unavailable) and using existing digital data on the boundaries.” Notes: The state parks layer in this basemap is filtered from the CPW Managed Properties (public access only) layer from this feature layer Source: Colorado Parks and Wildlife CPW Admin Data Feature LayerDenver Parks:Description: "This dataset should be used as a reference to locate parks, golf courses, and recreation centers managed by the Department of Parks and Recreation in the City and County of Denver. Data is based on parcel ownership and does not include other areas maintained by the department such as medians and parkways. The data should be used for planning and design purposes and cartographic purposes only."Source: City and County of Denver Parks REST EndpointNational Wilderness Areas:Description: “A parcel of Forest Service land congressionally designated as wilderness such as National Wilderness Area.”Notes: This layer was filtered to only include National Wilderness Areas in the State of ColoradoSource: United States Department of Agriculture National Wilderness Areas REST EndpointNational Forests: Description: “A depiction of the boundaries encompassing the National Forest System (NFS) lands within the original proclaimed National Forests, along with subsequent Executive Orders, Proclamations, Public Laws, Public Land Orders, Secretary of Agriculture Orders, and Secretary of Interior Orders creating modifications thereto, along with lands added to the NFS which have taken on the status of 'reserved from the public domain' under the General Exchange Act. The following area types are included: National Forest, Experimental Area, Experimental Forest, Experimental Range, Land Utilization Project, National Grassland, Purchase Unit, and Special Management Area.”Notes: This layer was filtered to only include National Forests in the State of ColoradoSource: United States Department of Agriculture Original Proclaimed National Forests REST Endpoint

The datasets that are included in the composite layer making up the protected area layer are given below: Dataset Example Designations Citation or hyperlink PAD-US (CBI Edition) National Parks, GAP Status 1 and 2, State Parks, Open Spaces, Natural Areas “PAD-US (CBI Edition) Version 2.1b, California”. Conservation Biology Institute. 2016. https://databasin.org/datasets/64538491f43e42ba83e26b849f2cad28. Conservation Easements California Conservation Easement Database (CCED), 2022a. 2022. www.CALands.org. Accessed December 2022. Inventoried Roadless Areas “Inventoried Roadless Areas.” US Forest Service. Dec 12, 2022. https://www.fs.usda.gov/detail/roadless/2001roadlessrule/maps/?cid=stelprdb5382437 BLM National Landscape Conservation System Wilderness Areas, Wilderness Study Areas, National Monuments, National Conservation Lands, Conservation Lands of the California Desert, Scenic Rivers https://gbp-blm-egis.hub.arcgis.com/datasets/BLM-EGIS::blm-ca-wilderness-areas https://gbp-blm-egis.hub.arcgis.com/datasets/BLM-EGIS::blm-ca-wilderness-study-areas https://gbp-blm-egis.hub.arcgis.com/datasets/BLM-EGIS::blm-ca-national-monuments-nca-forest-reserves-other-poly/ Greater Sage Grouse Habitat Conservation Areas (BLM) For solar technology: BLM_Managm IN (‘PHMA’, ‘GHMA’, ‘OHMA’) For wind technology: BLMP_Managm = ‘PHMA’ “Nevada and Northeastern California Greater Sage-Grouse Approved Resource Management Plan Amendment.” US Department of the Interior Bureau of Land Management Nevada State Office. 2015. https://eplanning.blm.gov/public_projects/lup/103343/143707/176908/NVCA_Approved_RMP_Amendment.pdf Other BLM Protected Areas Areas of Critical Environmental Concern (ACECs), Recreation Areas (SRMA, ERMA, OHV Designated Areas), including Vinagre Wash Special Recreation Management Area, National Scenic Areas, including Alabama Hills National Scenic Area https://gbp-blm-egis.hub.arcgis.com/datasets/BLM-EGIS::blm-ca-off-highway-vehicle-designations https://gbp-blm-egis.hub.arcgis.com/datasets/BLM-EGIS::blm-ca-areas-of-critical-environmental-concern https://gbp-blm-egis.hub.arcgis.com/datasets/BLM-EGIS::blm-az-area-of-critical-environmental-concern-polygon [Big Marias ACEC and Beale Slough Riparian and Cultural ACEC] BLM, personal communication, November 2, 2022. Mono Basin NFSA https://pcta.maps.arcgis.com/home/item.html?id=cf1495f8e09940989995c06f9e290f6b#overview Terrestrial 30x30 Conserved Areas Gap Status 1 and 2 CA Nature. 30x30 Conserved Areas, Terrestrial. 2021. https://www.californianature.ca.gov/datasets/CAnature::30x30-conserved-areas-terrestrial/ Accessed September 2022. CPAD Open Spaces and Parks under city or county level California Protected Areas Database (CPAD), 2022b. 2022. https://www.calands.org/cpad/. Accessed February 22, 2023. USFS Special Interest Management Areas https://data-usfs.hub.arcgis.com/datasets/usfs::special-interest-management-areas-feature-layer/about Proposed Protected Area Molok Luyuk Extension (Berryessa Mtn NM Expansion) CalWild, personal communication, January 19, 2023. This layer is featured in the CEC 2023 Land-Use Screens for Electric System Planning data viewer.For more information about this layer and its use in electric system planning, please refer to the Land Use Screens Staff Report in the CEC Energy Planning Library. Change Log: Version 1.1 (January 22, 2024 10:40 AM) Layer revised to allow for gaps to remain when combining all components of the protected area layer.

Polygon features depicting the NLCS Wilderness Areas. A Wilderness is a special place where the earth and its community of life are essentially undisturbed; they retain a primeval character, without permanent improvements and generally appear to have been affected primarily by the forces of nature. In 1964, Congress established the National Wilderness Preservation System and designated the first Wilderness Areas in passing the Wilderness Act. The uniquely American idea of wilderness has become an increasingly significant tool to ensure long-term protection of natural landscapes. Wilderness protects the habitat of numerous wildlife species and serves as a biodiversity bank for many species of plants and animals. Wilderness is also a source of clean water.

California Nature Conserved Areas Explorer The Conserved Areas Explorer is a web application enabling users to investigate a synthesis of the best available data representing lands and coastal waters of California that are durably protected and managed to support functional ecosystems, both intact and restored, and the species that rely on them. Understanding the spatial distribution and extent of these durably protected and managed areas is a vital aspect of tracking and achieving the “30x30” goal of conserving 30% of California's lands and waters by 2030.Terrestrial and Freshwater Data• The California Protected Areas Database (CPAD), developed and managed by GreenInfo Network, is the most comprehensive collection of data on open space in California. CPAD data consists of Holdings, a single parcel or group of parcels, such that the spatial features of CPAD correspond to ownership boundaries. • The California Conservation Easement Database (CCED), also managed by GreenInfo Network, aggregates data on lands with easements. Conservation Easements are legally recorded interests in land in which a landholder sells or relinquishes certain development rights to their land in perpetuity. Easements are often used to ensure that lands remain as open space, either as working farm or ranch lands, or areas for biodiversity protection. Easement restrictions typically remain with the land through changes in ownership. • The Protected Areas Database of the United States (PAD-US), hosted by the United States Geological Survey (USGS), is developed in coordination with multiple federal, state, and non-governmental organization (NGO) partners. PAD-US, through the Gap Analysis Project (GAP), uses a numerical coding system in which GAP codes 1 and 2 correspond to management strategies with explicit emphasis on protection and enhancement of biodiversity. PAD-US is not specifically aligned to parcel boundaries and as such, boundaries represented within it may not align with other data sources. • Numerous datasets representing designated boundaries for entities such as National Parks , and Monuments, Wild and Scenic Rivers, Wilderness Areas, and others, were downloaded from publicly available sources, typically hosted by the managing agency.Methodology1. CPAD and CCED represent the most accurate _location and ownership information for parcels in California which contribute to the preservation of open space and cultural and biological resources.2. Superunits are collections of parcels (Holdings) within CPAD which share a name, manager, and access policy. Most Superunits are also managed with a generally consistent strategy for biodiversity conservation. Examples of Superunits include Yosemite National Park, Giant Sequoia National Monument, and Anza-Borrego Desert State Park. 3. Some Superunits, such as those owned and managed by the Bureau of Land Management, U.S. Forest Service, or National Park Service , are intersected by one or more designations, each of which may have a distinct management emphasis with regards to biodiversity. Examples of such designations are Wilderness Areas, Wild and Scenic Rivers, or National Monuments.4. CPAD Superunits were intersected with all designation boundary files to create the operative spatial units for conservation analysis, henceforth 'Conservation Units,' which make up the Conserved Areas Map Layer. Each easement was functionally considered to be a Superunit. 5. Each Conservation Unit was intersected with the PAD-US dataset in order to determine the management emphasis with respect to biodiversity, i.e., the GAP code. Because PAD-US is national in scope and not specifically parcel aligned with California assessors' surveys, a direct spatial extraction of GAP codes from PAD-US would leave tens of thousands of GAP code data slivers within the Conserved Areas Map. Consequently, a generalizing approach was adopted, such that any Conservation Unit with greater than 80% areal overlap with a single GAP code was uniformly assigned that code. Additionally, the total area of GAP codes 1 and 2 were summed for the remaining uncoded Conservation Units. If this sum was greater than 80% of the unit area, the Conservation Unit was coded as GAP 2. 6. Subsequent to this stage of analysis, certain Conservation Units remained uncoded, either due to the lack of a single GAP code (or combined GAP codes 1&2) overlapping 80% of the area, or because the area was not sufficiently represented in the PAD-US dataset. 7. These uncoded Conservation Units were then broken down into their constituent, finer resolution Holdings, which were then analyzed according to the above workflow. 8. Areas remaining uncoded following the two-step process of coding at the Superunit and Holding levels were assigned a GAP code of 4. This is consistent with the definition of GAP Code 4: areas unknown to have a biodiversity management focus. 9. Greater than 90% of all areas in the Conserved Areas Explorer were GAP coded at the level of Superunits intersected by designation boundaries, the coarsest unit of analysis. By adopting this coarser analytical unit, the Conserved Areas Explorer maintains a greater level of user responsiveness, avoiding the need to maintain and display hundreds of thousands of additional parcel records, which in most cases would only reflect the management scenario and GAP status of the umbrella Superunit and other spatially coincident designations.Marine Data • The Conserved Areas Explorer displays the network of 124 Marine Protected Areas (MPAs) along coastal waters and the shoreline of California. There are several categories of MPAs, some permitting varying levels of commercial and recreational fishing and waterfowl hunting, while roughly half of all MPAs do not permit any harvest. These data include all of California's marine protected areas (MPAs) as defined January 1, 2019. This dataset reflects the Department of Fish and Wildlife's best representation of marine protected areas based upon current California Code of Regulations, Title 14, Section 632: Natural Resources, Division 1: FGC- DFG. This dataset is not intended for navigational use or defining legal boundaries.Tracking Conserved AreasThe total acreage of conserved areas will increase as California works towards its 30x30 goal. Some changes will be due to shifts in legal protection designations or management status of specific lands and waters. However, shifts may also result from new data representing improvements in our understanding of existing biodiversity conservation efforts. The California Nature Conserved Areas Explorer is expected to generate a great deal of excitement regarding the state's trajectory towards achieving the 30x30 goal. We also expect it to spark discussion about how to shape that trajectory, and how to strategize and optimize outcomes. We encourage landowners, managers, and stakeholders to zoom into the locations they understand best and share their expertise with us to improve the data representing the status of conservation efforts at these sites. The Conserved Areas Explorer presents a tremendous opportunity to strengthen our existing data infrastructure and the channels of communication between land stewards and data curators, encouraging the transfer of knowledge and improving the quality of data. CPAD, CCED, and PAD-US are built from the ground up. These terrestrial data sources are derived from available parcel information and submissions from those who own and manage the land. So better data starts with you. Do boundary lines require updating? Is the GAP code inconsistent with a Holding’s conservation status? If land under your care can be better represented in the Conserved Areas Explorer, please use this link to initiate a review. The results of these reviews will inform updates to the California Protected Areas Database, California Conservation Easement Database, and PAD-US as appropriate for incorporation into future updates to CA Nature and tracking progress to 30x30.