At 282 feet below sea level, Death Valley in the Mojave Desert, California is the lowest point of elevation in the United States (and North America). Coincidentally, Death Valley is less than 85 miles from Mount Whitney, the highest point of elevation in the mainland United States. Death Valley is one of the hottest places on earth, and in 1913 it was the location of the highest naturally occurring temperature ever recorded on Earth (although some meteorologists doubt its legitimacy). New Orleans Louisiana is the only other state where the lowest point of elevation was below sea level. This is in the city of New Orleans, on the Mississippi River Delta. Over half of the city (up to two-thirds) is located below sea level, and recent studies suggest that the city is sinking further - man-made efforts to prevent water damage or flooding are cited as one reason for the city's continued subsidence, as they prevent new sediment from naturally reinforcing the ground upon which the city is built. These factors were one reason why New Orleans was so severely impacted by Hurricane Katrina in 2005 - the hurricane itself was one of the deadliest in history, and it destroyed many of the levee systems in place to prevent flooding, and the elevation exacerbated the damage caused. Highest low points The lowest point in five states is over 1,000 feet above sea level. Colorado's lowest point, at 3,315 feet, is still higher than the highest point in 22 states or territories. For all states whose lowest points are found above sea level, these points are located in rivers, streams, or bodies of water.

The United States has an average elevation of roughly 2,500 feet (763m) above sea level, however there is a stark contrast in elevations across the country. Highest states Colorado is the highest state in the United States, with an average elevation of 6,800 feet (2,074m) above sea level. The 10 states with the highest average elevation are all in the western region of the country, as this is, by far, the most mountainous region in the country. The largest mountain ranges in the contiguous western states are the Rocky Mountains, Sierra Nevada, and Cascade Range, while the Appalachian Mountains is the longest range in the east - however, the highest point in the U.S. is Denali (Mount McKinley), found in Alaska. Lowest states At just 60 feet above sea level, Delaware is the state with the lowest elevation. Delaware is the second smallest state, behind Rhode Island, and is located on the east coast. Larger states with relatively low elevations are found in the southern region of the country - both Florida and Louisiana have an average elevation of just 100 feet (31m) above sea level, and large sections of these states are extremely vulnerable to flooding and rising sea levels, as well as intermittent tropical storms.

Link to the ScienceBase Item Summary page for the item described by this metadata record. Service Protocol: Link to the ScienceBase Item Summary page for the item described by this metadata record. Application Profile: Web Browser. Link Function: information

At 20,310 feet (6.2km) above sea level, the highest point in the United States is Denali, Alaska (formerly known as Mount McKinley). The highest point in the contiguous United States is Mount Whitney, in the Sierra Nevada mountain range in California; followed by Mount Elbert, Colorado - the highest point in the Rocky Mountains. When looking at the highest point in each state, the 13 tallest peaks are all found in the western region of the country, while there is much more diversity across the other regions and territories.

Despite being approximately 6,500 feet lower than Denali, Hawaii's Mauna Kea is sometimes considered the tallest mountain (and volcano) on earth. This is because its base is well below sea level - the mountain has a total height of 33,474 feet, which is almost 4,500 feet higher than Mount Everest.

Severe drought across the Western United States has caused water levels at Lake Mead in Nevada to drop in recent decades. Since 1970, the lowest end of month water level of Lake Mead at Hoover Dam was recorded in July 2022, at ***** feet above sea level. This was also the lowest level since the 1930s, when the lake was formed by the Hoover Dam. Seven of the 10 lowest water levels recorded since 1970 were in 2022, while three were recorded in 2023. Lake Mead is considered at full capacity when water levels reach 1,220 feet above sea level, but it’s able to hold a maximum of 1,229 feet of water. The last time the lake approached this capacity was in the summer of 1983. Lake Mead, the largest artificial reservoir by volume in the United States, generates electricity and supplies drinking water to California, Arizona, Nevada, and parts of Mexico.

This metadata record describes bottom-mounted ADCP data collected at Point Arguello, California, USA, by PISCO. Measurements were collected using a RDI 600 kHz Workhorse Sentinel ADCP beginning 2007-11-05. The instrument depth was 015 meters, in an overall water depth of 15 meters (both relative to Mean Sea Level, MSL). The instrument was programmed with a sampling interval of 2.0 minutes and a vertical resolution of 1 meter.

Important Note: This item is in mature support as of June 2024 and will be retired in December 2026. A new version of this item is available for your use. Esri recommends updating your maps and apps to use the new version. This layer displays lands in the Protected Areas Database of the United States that have no known mandate for protection.The Protected Areas Database of the United States classifies lands into four GAP Status classes. This layer displays the lowest level of protection known as GAP Status 4. Because designations may overlap, areas may have a higher level of protection than indicated in this layer. See the USA Protected Areas or the USA Protected Areas - GAP 1-4 layers for the highest level of protection for a specific area.Dataset SummaryPhenomenon Mapped: Areas with no known mandate for protection (GAP Status 4)Units: MetersCell Size: 30.92208102 metersSource Type: ThematicPixel Type: 8-bit unsigned integerData Coordinate System: WGS 1984Mosaic Projection: Web Mercator Auxiliary SphereExtent: 50 United States plus Puerto Rico, the US Virgin Islands, Guam, Northern Mariana Islands and American Samoa.Source: USGS National Gap Analysis Program PAD-US version 3.0Publication Date: July 2022ArcGIS Server URL: https://landscape10.arcgis.com/arcgis/This layer displays protected areas from the Protected Areas Database of the United States version 3.0 created by the USGS National Gap Analysis Program. This layer displays GAP Status 4 - areas with no known mandate for protection.The source data for this layer are available here. A feature layer published from this dataset is also available. The data were mapped from the original Albers projection to the WGS 1984 Geographic Coordinate System using the Project Tool. The polygon vector layer was converted to raster layers using the Polygon to Raster Tool using the National Elevation Dataset 1 arc second product as a snap raster.The service behind this layer was published with 8 functions allowing the user to select different views of the service. Other layers created from this service using functions include:USA Protected AreasUSA Protected from Land Cover ConversionUSA Unprotected AreasUSA Protected Areas - Gap Status 1-4USA Protected Areas - Gap Status 1USA Protected Areas - Gap Status 2USA Protected Areas - Gap Status 3What can you do with this Layer? This layer is suitable for both visualization and analysis across the ArcGIS system. This layer can be combined with your data and other layers from the ArcGIS Living Atlas of the World in ArcGIS Online and ArcGIS Pro to create powerful web maps that can be used alone or in a story map or other application.Because this layer is part of the ArcGIS Living Atlas of the World it is easy to add to your map:In ArcGIS Online, you can add this layer to a map by selecting Add then Browse Living Atlas Layers. A window will open. Type "GAP Status 4" in the search box and browse to the layer. Select the layer then click Add to Map.In ArcGIS Pro, open a map and select Add Data from the Map Tab. Select Data at the top of the drop down menu. The Add Data dialog box will open on the left side of the box, expand Portal if necessary, then select Living Atlas. Type "GAP Status 4" in the search box, browse to the layer then click OK.In ArcGIS Pro you can use the built-in raster functions to create custom extracts of the data. Imagery layers provide fast, powerful inputs to geoprocessing tools, models, or Python scripts in Pro.The ArcGIS Living Atlas of the World provides an easy way to explore many other beautiful and authoritative maps on hundreds of topics like this one.

This metadata record describes bottom-mounted ADCP data collected at Point Sal, California, USA, by PISCO. Measurements were collected using an RDI 600 kHz Workhorse Sentinel ADCP beginning 2006-12-07. The instrument depth was 015 meters, in an overall water depth of 015 meters (both relative to Mean Sea Level, MSL). The instrument was programmed with a sampling interval of 2.0 minutes and a vertical resolution of 1 meter.

This layer shows total population counts by sex, age, and race groups data from the 2020 Census Demographic and Housing Characteristics. This is shown by Nation, Consolidated City, Census Designated Place, Incorporated Place boundaries. Each geography layer contains a common set of Census counts based on available attributes from the U.S. Census Bureau. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   To see the full list of attributes available in this service, go to the "Data" tab above, and then choose "Fields" at the top right. Each attribute contains definitions, additional details, and the formula for calculated fields in the field description.Vintage of boundaries and attributes: 2020 Demographic and Housing Characteristics Table(s): P1, H1, H3, P2, P3, P5, P12, P13, P17, PCT12 (Not all lines of these DHC tables are available in this feature layer.)Data downloaded from: U.S. Census Bureau’s data.census.gov siteDate the Data was Downloaded: May 25, 2023Geography Levels included: Nation, Consolidated City, Census Designated Place, Incorporated PlaceNational Figures: included in Nation layer The United States Census Bureau Demographic and Housing Characteristics: 2020 Census Results 2020 Census Data Quality Geography & 2020 Census Technical Documentation Data Table Guide: includes the final list of tables, lowest level of geography by table and table shells for the Demographic Profile and Demographic and Housing Characteristics.News & Updates This layer is ready to be used in ArcGIS Pro, ArcGIS Online and its configurable apps, Story Maps, dashboards, Notebooks, Python, custom apps, and mobile apps. Data can also be exported for offline workflows. Please cite the U.S. Census Bureau when using this data. Data Processing Notes: These 2020 Census boundaries come from the US Census TIGER geodatabases. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For Census tracts and block groups, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract and block group boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2020 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are unchanged and available as attributes within the data table (units are square meters).  The layer contains all US states, Washington D.C., and Puerto Rico. Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Block groups that fall within the same criteria (Block Group denoted as 0 with no area land) have also been removed.Percentages and derived counts, are calculated values (that can be identified by the "_calc_" stub in the field name). Field alias names were created based on the Table Shells file available from the Data Table Guide for the Demographic Profile and Demographic and Housing Characteristics. Not all lines of all tables listed above are included in this layer. Duplicative counts were dropped. For example, P0030001 was dropped, as it is duplicative of P0010001.To protect the privacy and confidentiality of respondents, their data has been protected using differential privacy techniques by the U.S. Census Bureau.

This metadata record describes bottom-mounted ADCP data collected at Point Sal, California, USA, by PISCO. Measurements were collected using a RDI 600 kHz Workhorse Sentinel ADCP beginning 2008-09-30. The instrument depth was 015 meters, in an overall water depth of 15 meters (both relative to Mean Sea Level, MSL). The instrument was programmed with a sampling interval of 2.0 minutes and a vertical resolution of 1 meter.

Export of nuts, in terms of value, decreased to $221M in July 2023.

The Delmarva Peninsula is a 220-kilometer-long headland, spit, and barrier island complex that was significantly affected by Hurricane Sandy in the fall of 2012. The U.S. Geological Survey conducted cruises during the summers of 2014 and 2015 to map the inner continental shelf of the Delmarva Peninsula using geophysical and sampling techniques to define the geologic framework that governs coastal system evolution at storm-event and longer timescales. Geophysical data collected during the cruises include swath bathymetric, sidescan sonar, chirp and boomer seismic reflection profiles, grab sample and bottom photograph data. More information about the USGS survey conducted as part of the Hurricane Sandy Response-- Geologic Framework and Coastal Vulnerability Study can be found at the project website or on the WHCMSC Field Activity Web pages: https://woodshole.er.usgs.gov/project-pages/delmarva/, https://cmgds.marine.usgs.gov/fan_info.php?fan=2014-002-FA and https://cmgds.marine.usgs.gov/fan_info.php?fan=2015-001-FA. Data collected during the 2014 survey can be obtained here: https://doi.org/10.5066/F7MW2F60

Lake Mead's water elevation at the end of April 2025 was ******* feet above sea level, a small decrease in comparison to the previous month. In July 2022, the reservoir reached the lowest monthly water level recorded since Lake Mead was first formed by the Hoover Dam in the 1930s. At full capacity, Lake Mead has a water level of 1,229 feet above sea level. Lake Mead nearing dead pool status Situated on the border of Arizona and Nevada, Lake Mead is the largest reservoir in the United States. It is a crucial water source that provides drinking water to tens of millions of people in the states of Arizona, California, and Nevada. However, experts have warned that if the lake continues to recede due to the severe droughts across the Southwestern United States, it will become a dead pool. This means that there will not be enough water for the Hoover Dam to produce hydropower or deliver water downstream to metropolitan centers. U.S. water resources are depleting With large swathes of western U.S. recently suffering from a megadrought, which is a period of prolonged drought that spans more than two decades, many other lakes have been severely depleted in recent years. Water levels of major reservoirs in California have fallen to all-time lows in recent years. California’s two largest reservoirs, Shasta Lake and Oroville Lake, were at less than half capacity in July 2022. However, in spring 2023 they were both mostly replenished due to more favorable environmental factors.

This dataset was created to represent the land surface elevation at 1:24,000 scale for Florida. The elevation contour lines representing the land surface elevation were digitized from United States Geological survey 1:24,000 (7.5 minute) quadrangles and were compiled by South Florida, South West Florida, St. Johns River and Suwannee River Water Management Districts and FDEP. QA and corrections to the data were supplied by the Florida Department of Environmental Protection's Florida Geological Survey and the Division of Water Resource Management. This data, representing over 1,000 USGS topographic maps, spans a variety of contour intervals including 1 and 2 meter and 5 and 10 foot. The elevation values have been normalized to feet in the final data layer. Attributes for closed topographic depressions were also captured where closed (hautchered) features were identified and the lowest elevation determined using the closest contour line minus one-half the contour interval. This data was derived from the USGS 1:24,000 topographic map series. The data is more than 20 years old and is likely out-of-date in areas of high human activity.

This layer shows households data from the 2020 Census Demographic and Housing Characteristics. This is shown by Nation, Consolidated City, Census Designated Place, Incorporated Place boundaries. Each geography layer contains a common set of Census counts based on available attributes from the U.S. Census Bureau. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis.   To see the full list of attributes available in this service, go to the "Data" tab above, and then choose "Fields" at the top right. Each attribute contains definitions, additional details, and the formula for calculated fields in the field description.Vintage of boundaries and attributes: 2020 Demographic and Housing Characteristics Table(s): P1, H1, H3, P16, P16B, P16C, P16D, P16E, P16F, P16G, P16H, P16I, P19, P20, PCT5, PCT6, PCT14, PCT14B, PCT14C, PCT14D, PCT14E, PCT14F, PCT14G, PCT14H, PCT14I, PCT15, H14, H9, H12, H15 Data downloaded from: U.S. Census Bureau’s data.census.gov siteDate the Data was Downloaded: May 25, 2023Geography Levels included: Nation, Consolidated City, Census Designated Place, Incorporated PlaceNational Figures: included in Nation layer The United States Census Bureau Demographic and Housing Characteristics: 2020 Census Results 2020 Census Data Quality Geography & 2020 Census Technical Documentation Data Table Guide: includes the final list of tables, lowest level of geography by table and table shells for the Demographic Profile and Demographic and Housing Characteristics.News & Updates This layer is ready to be used in ArcGIS Pro, ArcGIS Online and its configurable apps, Story Maps, dashboards, Notebooks, Python, custom apps, and mobile apps. Data can also be exported for offline workflows. Please cite the U.S. Census Bureau when using this data. Data Processing Notes: These 2020 Census boundaries come from the US Census TIGER geodatabases. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For Census tracts and block groups, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract and block group boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2020 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are unchanged and available as attributes within the data table (units are square meters).  The layer contains all US states, Washington D.C., and Puerto Rico. Census tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99). Block groups that fall within the same criteria (Block Group denoted as 0 with no area land) have also been removed.Percentages and derived counts, are calculated values (that can be identified by the "_calc_" stub in the field name). Field alias names were created based on the Table Shells file available from the Data Table Guide for the Demographic Profile and Demographic and Housing Characteristics. Not all lines of all tables listed above are included in this layer. Duplicative counts were dropped. For example, P0030001 was dropped, as it is duplicative of P0010001.To protect the privacy and confidentiality of respondents, their data has been protected using differential privacy techniques by the U.S. Census Bureau.

This metadata record describes bottom-mounted ADCP data collected at Point Sal, California, USA, by PISCO. Measurements were collected using an RDI 600 kHz Workhorse Sentinel ADCP beginning 2002-11-27. The instrument depth was 015 meters, in an overall water depth of 15 meters (both relative to Mean Sea Level, MSL). The instrument was programmed with a sampling interval of 2.0 minutes and a vertical resolution of 1 meter.

This metadata record describes bottom-mounted ADCP data collected at Point Sal, California, USA, by PISCO. Measurements were collected using an RDI 600 kHz Workhorse Sentinel ADCP beginning 2005-11-01. The instrument depth was 015 meters, in an overall water depth of 015 meters (both relative to Mean Sea Level, MSL). The instrument was programmed with a sampling interval of 2.0 minutes and a vertical resolution of 1 meter.