This is a tiled collection of the 3D Elevation Program (3DEP) and is one meter resolution. The 3DEP data holdings serve as the elevation layer of The National Map, and provide foundational elevation information for earth science studies and mapping applications in the United States. Scientists and resource managers use 3DEP data for hydrologic modeling, resource monitoring, mapping and visualization, and many other applications. The elevations in this DEM represent the topographic bare-earth surface. USGS standard one-meter DEMs are produced exclusively from high resolution light detection and ranging (lidar) source data of one-meter or higher resolution. One-meter DEM surfaces are seamless within collection projects, but, not necessarily seamless across projects. The spatial reference used for tiles of the one-meter DEM within the conterminous United States (CONUS) is Universal Transverse Mercator (UTM) in units of meters, and in conformance with the North American Datum of 1983 ...

This is a tiled collection of the 3D Elevation Program (3DEP) and is 1/9 arc-second (approximately 3 m) resolution.The 3DEP data holdings serve as the elevation layer of The National Map, and provide foundational elevation information for earth science studies and mapping applications in the United States. Scientists and resource managers use 3DEP data for hydrologic modeling, resource monitoring, mapping and visualization, and many other applications. The elevations in this DEM represent the topographic bare-earth surface. The seamless 1/9 arc-second DEM layers are derived from diverse source data that are processed to a common coordinate system and unit of vertical measure. These data are distributed in geographic coordinates in units of decimal degrees, and in conformance with the North American Datum of 1983 (NAD 83). All elevation values are in meters and, over the continental United States, are referenced to the North American Vertical Datum of 1988 (NAVD88). The seamless 1/9 arc-second DEM layer project-based coverage for portions of the conterminous United States, limited areas of Alaska, and Guam. The seamless 1/9 arc-second NED layer is available as pre-staged products tiled in 15 minute blocks in Erdas .img format. Since 2015, the seamless 1/9 arc-second DEM layer is no longer being updated. Other 3DEP products are nationally seamless DEMs in resolutions of 1/3, 1, and 2 arc seconds. These seamless DEMs were referred to as the National Elevation Dataset (NED) from about 2000 through 2015 at which time they became the seamless DEM layers under the 3DEP program and the NED name and system were retired. Other 3DEP products include one-meter DEMs produced exclusively from high resolution light detection and ranging (lidar) source data and five-meter DEMs in Alaska as well as various source datasets including the lidar point cloud and interferometric synthetic aperture radar (Ifsar) digital surface models and intensity images. All 3DEP products are public domain.

This is a 1 arc-second (approximately 30 m) resolution tiled collection of the 3D Elevation Program (3DEP) seamless data products . 3DEP data serve as the elevation layer of The National Map, and provide basic elevation information for Earth science studies and mapping applications in the United States. Scientists and resource managers use 3DEP data for global change research, hydrologic modeling, resource monitoring, mapping and visualization, and many other applications. 3DEP data compose an elevation dataset that consists of seamless layers and a high resolution layer. Each of these layers consists of the best available raster elevation data of the conterminous United States, Alaska, Hawaii, territorial islands, Mexico and Canada. 3DEP data are updated continually as new data become available. Seamless 3DEP data are derived from diverse source data that are processed to a common coordinate system and unit of vertical measure. These data are distributed in geographic coordinates in units of decimal degrees, and in conformance with the North American Datum of 1983 (NAD 83). All elevation values are in meters and, over the conterminous United States, are referenced to the North American Vertical Datum of 1988 (NAVD 88). The vertical reference will vary in other areas. The elevations in these DEMs represent the topographic bare-earth surface. All 3DEP products are public domain.

This dataset includes data over Canada and Mexico as part of an international, interagency collaboration with the Mexico's National Institute of Statistics and Geography (INEGI) and the Natural Resources Canada (NRCAN) Centre for Topographic Information-Sherbrook, Ottawa. For more details on the data provenance of this dataset, visit here and here.

Click here for a broad overview of this dataset

The 3D Elevation Program (3DEP) data serve as the elevation layer of The National Map, and provide basic elevation information for Earth science studies and mapping applications in the United States. Scientists and resource managers use 3DEP data for global change research, hydrologic modeling, resource monitoring, mapping and visualization, and many other applications. This dataset is a 1 meter resolution, tiled collection of 3DEP project-based data. This dataset was introduced in 2015 with limited coverage of the U.S., but will be expanding as new DEMs from 3DEP quality level 2 or better lidar data are acquired. USGS standard one-meter DEMs are produced exclusively from high resolution lidar source data of one-meter or higher resolution. One-meter DEM surfaces are seamless within collection projects, but, not necessarily seamless across projects. The spatial reference used for tiles of the one-meter DEM within the conterminous United States (CONUS) is Universal Transverse Mercator (UTM) in units of meters, and in conformance with the North American Datum of 1983 (NAD83). All bare earth elevation values are in meters and are referenced to the North American Vertical Datum of 1988 (NAVD88). Data is distributed in the UTM Zone in which it lies. All 3DEP products are public domain. Click here for a broad overview of this dataset

This is the seamless 3DEP DEM dataset for the U.S. with full coverage of the 48 conterminous states, Hawaii, and U.S. territories. Alaska coverage is partially available now and is being expanded to statewide coverage as part of the Alaska Mapping Initiative. Ground spacing is approximately 10 meters north/south, but variable east/west due to convergence of meridians with latitude. Spatial metadata dataset is ingested as a separate asset USGS_3DEP_10m_metadata. The 1m dataset is ingested as USGS_3DEP_1m. Dataset uploaded by Farmers Business Network.

This collection of the 3D Elevation Program (3DEP) is at 1/3 arc-second (approximately 10 m) resolution. The 3DEP data holdings serve as the elevation layer of The National Map, and provide foundational elevation information for earth science studies and mapping applications in the United States. Scientists and resource managers use 3DEP data for hydrologic modeling, resource monitoring, mapping and visualization, and many other applications. The elevations in this DEM represent the topographic bare-earth surface. The seamless 1/3 arc-second DEM layers are derived from diverse source data that are processed to a common coordinate system and unit of vertical measure. These data are distributed in geographic coordinates in units of decimal degrees, and in conformance with the North American Datum of 1983 (NAD 83). All elevation values are in meters and, over the continental United States, are referenced to the North American Vertical Datum of 1988 (NAVD88). The vertical reference will vary in other areas. The seamless 1/3 arc-second DEM layer provides coverage of the conterminous United States, Hawaii, Puerto Rico, other territorial islands, and in limited areas of Alaska. These seamless DEMs were referred to as the National Elevation Dataset (NED) from about 2000 through 2015 at which time they became the seamless DEM layers under the 3DEP program and the NED name and system were retired. All 3DEP products are public domain.

This is a tiled collection of the 3D Elevation Program (3DEP) covering Alaska only, and is 5-meter resolution. The 3DEP data holdings serve as the elevation layer of The National Map, and provide foundational elevation information for earth science studies and mapping applications in the United States. Scientists and resource managers use 3DEP data for hydrologic modeling, resource monitoring, mapping and visualization, and many other applications. The elevations in this DEM represent the topographic bare-earth surface. USGS standard 5-meter DEMs are produced exclusively from interferometric synthetic aperture radar (Ifsar) source data of 5-meter or higher resolution. Five-meter DEM surfaces are seamless within collection projects, but, not necessarily seamless across projects. This DEM is delivered in the original resolution, with the original spatial reference. All elevation units have been converted to meters. These data may be used as the source of updates to the seamless 1/3 arc-second DEM layer, which serves as the elevation layer of The National Map. Other 3DEP products are nationally seamless DEMs in resolutions of 1 and 2 arc seconds. These seamless DEMs were referred to as the National Elevation Dataset (NED) from about 2000 through 2015 at which time they became the seamless DEM layers under the 3DEP program and the NED name and system were retired. Other 3DEP products in Alaska include lidar point cloud and interferometric synthetic aperture radar (Ifsar) digital surface models and intensity images. All 3DEP products are public domain.

These topographic/bathymetric digital elevation models (DEMs) were collected and compiled to characterize erosion and deposition in the Colorado River and in an adjacent zone of laterally recirculating flow (eddy) during both average flow conditions and during a controlled flood that occurred in March 2008. The objectives of the study were to measure changes sandbar morphology that occurred during changes in discharge associated with the controlled flood. These data were collected between February 6 and March 31, 2008 in a 1-mile study reach on the Colorado River within Grand Canyon National Park beginning 44.5 miles downstream from Lees Ferry, Arizona. These data were collected by the USGS Grand Canyon Monitoring and Research Center with cooperators from Northern Arizona University and funding provided by the Glen Canyon Dam Adaptive Management Program. All bathymetric data were collected with a multibeam sonar system (Reson Seabat 8124 sonar with TSS MAHRSS reference system for heave, pitch, roll, and heading). Topographic data were collected by conventional total station. These data can be used to study changes in channel morphology associated with changes in streamflow conditions.

The USGS 3D Elevation Program (3DEP) Index service from The National Map shows two general categories of downloadable elevation data: (1) digital elevation model (DEM) datasets at standardized horizontal resolutions, and (2) elevation source data including that used to produce standard DEMs, and additional datasets derived from ifsar in Alaska only. Distributable DEM products include: 2 arc-second (in Alaska only); 1 arc-second; 1/3 arc-second; 1/9 arc-second; 5 meter (in Alaska only); and 1 meter. The 2-, 1-, and 1/3-arc-second products are staged for download in 1x1 degree tiles in ArcGrid, GridFloat, or IMG formats, while 1/9 arc-second products are staged in 15x15 minute tiles in IMG format only. The 5-meter products are staged for download in ArcGrid only as a single mosaicked raster to each project extent. The 1-meter products are staged in 10,000x10,000 meter tiles in IMG format only. Distributable elevation source data include: lidar point clouds (LPC) in LAS format for various parts of the U.S., and ifsar-derived digital surface models (DSM) and orthorectified radar images (ORI) in TIFF format in Alaska only. For additional information on the 3DEP, go to http://nationalmap.gov/3DEP/index.html.

This dataset contains the Digital Elevation Model (DEM) for Africa from the Hydrologic Derivatives for Modeling and Analysis (HDMA) database. The DEM data were developed and distributed by processing units. There are 19 processing units for Africa. The distribution files have the number of the processing unit appended to the end of the zip file name (e.g. af_dem_3_2.zip contains the DEM data for unit 3-2). The HDMA database provides comprehensive and consistent global coverage of raster and vector topographically derived layers, including raster layers of digital elevation model (DEM) data, flow direction, flow accumulation, slope, and compound topographic index (CTI); and vector layers of streams and catchment boundaries. The coverage of the data is global (-180º, 180º, -90º, 90º) with the underlying DEM being a hybrid of three datasets: HydroSHEDS (Hydrological data and maps based on SHuttle Elevation Derivatives at multiple Scales), Global Multi-resolution Terrain Elevation Da ...

This is a tiled collection of images with 1m pixel size from the 3D Elevation Program (3DEP). The 3DEP data holdings serve as the elevation layer of The National Map and provide foundational elevation information for earth science studies and mapping applications in the United States. The elevations in this DEM represent the topographic bare-earth surface. USGS standard 1m pixel size DEMs are produced exclusively from high resolution light detection and ranging (lidar) source data of images with 1m pixel size or higher resolution. 1m pixel size DEM surfaces are seamless within collection projects but not necessarily seamless across projects. The spatial reference used for tiles of the 1m pixel size DEM within the conterminous United States (CONUS) is Universal Transverse Mercator (UTM) in units of meters and in conformance with the North American Datum of 1983 (NAD83). All bare earth elevation values are in meters and are referenced to the North American Vertical Datum of 1988 (NAVD88). Each tile is distributed in the UTM Zone in which it lies. If a tile crosses two UTM zones, it is delivered in both zones. In this and other cases of image overlaps, elevation values might be slightly different in different images covering the same area. The 1m pixel size DEM is the highest resolution standard DEM offered in the 3DEP product suite. The 10m 3DEP dataset is available at USGS_3DEP_10m.

The Shuttle Radar Topography Mission (SRTM, see Farr et al. 2007) digital elevation data is an international research effort that obtained digital elevation models on a near-global scale. This SRTM V3 product (SRTM Plus) is provided by NASA JPL at a resolution of 1 arc-second (approximately 30m). This dataset has undergone a void-filling process using open-source data (ASTER GDEM2, GMTED2010, and NED), as opposed to other versions that contain voids or have been void-filled with commercial sources. For more information on the different versions see the SRTM Quick Guide. Documentation: User's Guide General Documentation Algorithm Theoretical Basis Document (ATBD)

Product: Lidar based digital elevation model (DEM) data tiles for ground classified points.

Geographic Extent: Approximately 21,453 square miles across South Carolina; Block 1 (Lot 6 QL2) - approximately 3,583 square miles in Anderson, Cherokee, Greenville, Laurens, Newberry, Oconee, Pickens, Spartanburg, and Union counties Block 2 (Lot 7 QL1) - approximately 950 square miles in Greenvill...

A 10-meter resolution land surface digital elevation model (DEM) for the islands of Palau from U.S. Geological Survey (USGS) 1/3 arc-second DEM quadrangles. For a grayscale hillshade image layer of this dataset, see "pw_usgs_all_dem10m_hillshade" in the distribution links listed in the metadata.

7.5 Minute Digital Elevation Model for the state of Arizona. Digital Elevation Model (DEM) is the terminology adopted by the USGS to describe terrain elevation data sets in a digital raster form. The standard DEM consists of a regular array of elevations cast on a designated coordinate projection system. The DEM data are stored as a series of profiles in which the spacing of the elevations along and between each profile is in regular whole number intervals. The normal orientation of data is by columns and rows. Each column contains a series of elevations ordered from south to north with the order of the columns from west to east. The DEM is formatted as one ASCII header record (A-record), followed by a series of profile records (B-records) each of which include a short B-record header followed by a series of ASCII integer elevations per each profile. The last physical record of the DEM is an accuracy record (C-record). The DEM for 7.5-minute units correspond to the USGS 1:24000 scale topographic quadrangle map series for all of the United States and its territories. Each 7.5 minute DEM is based on 30- by 30-meter data spacing with Universal Transverse Mercator(UTM) projection. Each 7.5- by 7.5-minute block provides the same coverage as the standard USGS 7.5-minute map series.

GTOPO30 is a global raster digital elevation model (DEM) providing terrain elevation data with a horizontal grid spacing of 30 arc seconds (approximately 1 kilometer). GTOPO30 was derived from several raster and vector sources of topographic information. For easier distribution, GTOPO30 has been divided into tiles [https://rda.ucar.edu/datasets/ds758.0/docs/tiles.gif]. Detailed information on the characteristics of GTOPO30 including the data distribution format, the data sources, production methods, accuracy, and hints for users, is found in the GTOPO30 README [https://rda.ucar.edu/datasets/ds758.0/docs/readme.txt] file.

GTOPO30, completed in late 1996, was developed over a three year period through a collaborative effort led by staff at the U.S. Geological Survey's Center for Earth Resources Observation and Science (EROS). The following organizations participated by contributing funding or source data: the National Aeronautics and Space Administration (NASA), the United Nations Environment Program and Global Resource Information Database (UNEP and GRID), the U.S. Agency for International Development (USAID), the Instituto Nacional de Estadistica Geografica e Informatica (INEGI) of Mexico, the Geographical Survey Institute (GSI) of Japan, Manaaki Whenua Landcare Research of New Zealand, and the Scientific Committee on Antarctic Research (SCAR).

Download .zipThis grid dataset is a digital-elevation model (DEM) for Ohio and portions of Pennsylvania, West Virginia, Kentucky, Indiana, and Michigan. The grid dataset was initially extracted from the United States Geological Survey (USGS) National Elevation Dataset (NED), which has a grid cell size of 30 meters.

Even though the NED dataset was produced to provide a seamless and consistent DEM data across the United States, there were still visible errors associated with USGS Level 1 DEM's. These errors were removed and replaced with new grids derived from the USGS Digital Line Graph (DLG) hypsography. The resulting DEM will be used in the analysis of geological features with respect to the earth's surface, and will be one component of cartographic basemaps.Contact Information:GIS Support, ODNR GIS ServicesOhio Department of Natural ResourcesOffice of Information TechnologyGIS Records2045 Morse Rd, Bldg I-2Columbus, OH, 43229Telephone: 614-265-6462Email: gis.support@dnr.ohio.gov

The Digital Elevation Model (DEM) dataset consists of tiled lidar DEM Images. Each file contains a raster image of the DEM. The Geographical Extent of this dataset extends to the entirety of the Southwest FL Lidar boundary delivery, approximately 2,347 square miles of the AOIs.

This image service provides access to a seamless USGS 10 Meter Digital Elevation Model (DEM) for Kentucky. This data can be downloaded from the KyGeoportal by quadrangle.Click here to download in E00 format.Click here to download in USGS format.

This data collection is the Original Product Resolution (OPR) Digital Elevation Model (DEM) as provided to the USGS. This source DEM is delivered in the original resolution, units and horizontal and vertical spatial references. These data may be used as the source of updates to the 3D Elevation Program (3DEP), which serves as the elevation layer of The National Map.