US National Grid- nationally consistent grid reference system in the USA. USNG enables a practical system of geo-addresses and a universal map index. This data resides in the GCS 1983 coordinate system and is most suitable for viewing over North America. This data support work done by the Kansas Adjutant General's Emergency Management Department (KDEM).The full Kansas geospatial catalog is administered by the Kansas Data Access & Support Center (DASC) and can be found at the following URL: https://hub.kansasgis.org/

USNG is standard that established a nationally consistent grid reference system. It provides a seamless plane coordinate system across jurisdictional boundaries and map scales; it enables precise position referencing with GPS, web map portals, and hardcopy maps. USNG enables a practical system of geoaddresses and a universal map index. This data resides in the GCS 1983 coordinate system and is most suitable for viewing over North America.

The data is separated into three groups, Small Scale Grids, 1000m Grids, and 100m Grids. The small scale grid group contains grids shown at smaller scales including the 6 x 8 decimal degree grids, the 100000m grids, and the 10000m grids. The 1000m grid group shows 1,000 meter grid squares. Due to the large volume of 1000m data, the 1000m grids are separate into UTM zones. This speeds up the querying time of the 1000m grids. The 100m grid group contains 100m grids for various metropolitan area in the U.S. and Puerto Rico. These metropolitan areas are further separate into time zones so it's easier to navigate through the Table of Contents to find a metro area.

The USNG is an alpha-numeric reference system that overlays the UTM coordinate system. This is a polygon feature data layer of United States National Grid (1000m x 1000m polygons ) constructed by the Center for Interdisciplinary Geospatial Information Technologies at Delta State University with support from the US Geological Survey under the Cooperative Agreement 07ERAG0083. For correct display, please set the base coordinate system and projection such that it matches the UTM zone for which these data were constructed using the NAD 83 datum. Further information about the US National Grid is available from http://www.fgdc.gov/usng and a viewing of these layers as applied to local geography may be seen at the National Map, http://www.nationalmap.gov.Fields to be considered:GZD: Grid Zone Designation -identifies the longitude zone number and the latitude band letter; SQID: 100,000 Meter Square ID -indicated the 100,000-meter square that is specific to the GZD.http://resources.arcgis.com/en/help/localgovernment/10.2./028s/other/DataDictionary.htm#FeatureClassUSNationalGridmetadata edited 08/2014

© Center for Interdisciplinary Geospatial Information Technologies, Delta State University, Cleveland Mississippi 38733 This layer is sourced from maps.cor.gov.

A map that tracks damage assessed parcels during or after an emergency. This map is meant to be used with the Operations Dasboard.

© City of Richardson

USNG is standard that established a nationally consistent grid reference system. It provides a seamless plane coordinate system across jurisdictional boundaries and map scales; it enables precise position referencing with GPS, web map portals, and hardcopy maps. USNG enables a practical system of geo-addresses and a universal map index. This data resides in the GCS 1983 coordinate system and is most suitable for viewing over North America. This layer shows 100-meter grid squares.

USNG is standard that established a nationally consistent grid reference system. It provides a seamless plane coordinate system across jurisdictional boundaries and map scales; it enables precise position referencing with GPS, web map portals, and hardcopy maps. USNG enables a practical system of geo-addresses and a universal map index. This data resides in the GCS 1983 coordinate system and is most suitable for viewing over North America. This layer shows 100,000-meter grid squares.

The U.S. National Grid (USNG) provides an efficient way to identify locations at different levels of detail anywhere in the United States. It can increase the usefulness and interoperability of printed maps and location-based services, such as global positioning systems (GPS). It is based on a universally defined geographic coordinate and grid system. For more information about the USNG, see: https://usngcenter.org

A set of reference maps for Minnesota based on the 10K USNG grid shows the location of schools, hospitals, fire and police stations, roads and political boundaries over a street or an air photo background. The maps can be viewed online or downloaded in GeoPDF format.

USNG is standard that established a nationally consistent grid reference system. It provides a seamless plane coordinate system across jurisdictional boundaries and map scales; it enables precise position referencing with GPS, web map portals, and hardcopy maps. USNG enables a practical system of geo-addresses and a universal map index. This data resides in the GCS 1983 coordinate system and is most suitable for viewing over North America. This layer shows 10,000-meter grid squares.

This feature layer, utilizing data from the Federal Geographic Data Committee (FGDC), displays the U.S. National Grid (USNG). The FGDC provides standards for a National Grid. Per the FGDC, "The objective of this standard is to create a more favorable environment for developing location-based services within the United States and to increase the interoperability of location services appliances with printed map products by establishing a nationally consistent grid reference system as the preferred grid for National Spatial Data Infrastructure (NSDI) applications. This standard defines the US National Grid. The U.S. National Grid is based on universally defined coordinate and grid systems and can, therefore, be easily extended for use world-wide as a universal grid reference system."

United States National Grids for the State of Florida, including 100,000 meter and 10,000 meter statewide grids, and 1,000 meter grids for the 16 and 17 UTM zones.

USNG is standard that established a nationally consistent grid reference system. It provides a seamless plane coordinate system across jurisdictional boundaries and map scales; it enables precise position referencing with GPS, web map portals, and hardcopy maps. USNG enables a practical system of geo-addresses and a universal map index. This data resides in the GCS 1983 coordinate system and is most suitable for viewing over North America. This layer shows 6-degree by 8-degree grid squares.

This feature layer, utilizing data from the Federal Geographic Data Committee (FGDC), displays the U.S. National Grid (USNG). The FGDC provides standards for a National Grid. Per the FGDC, "The objective of this standard is to create a more favorable environment for developing location-based services within the United States and to increase the interoperability of location services appliances with printed map products by establishing a nationally consistent grid reference system as the preferred grid for National Spatial Data Infrastructure (NSDI) applications. This standard defines the US National Grid. The U.S. National Grid is based on universally defined coordinate and grid systems and can, therefore, be easily extended for use world-wide as a universal grid reference system."

description: This is a polygon feature data layer of United States National Grid (1000m x 1000m polygons ) constructed by the Center for Interdisciplinary Geospatial Information Technologies at Delta State University with support from the US Geological Survey under the Cooperative Agreement 07ERAG0083. For correct display, please set the base coordinate system and projection such that it matches the UTM zone for which these data were constructed using the NAD 83 datum. Further information about the US National Grid is available from http://www.fgdc.gov/usng and a viewing of these layers as applied to local geography may be seen at the National Map, http://www.nationalmap.gov. The name of each dataset has the following format - StateAbbv_USNG_UTMXX. For example, for the UTM zone 15 of Mississippi, the dataset is named MS_USNG_UTM15.; abstract: This is a polygon feature data layer of United States National Grid (1000m x 1000m polygons ) constructed by the Center for Interdisciplinary Geospatial Information Technologies at Delta State University with support from the US Geological Survey under the Cooperative Agreement 07ERAG0083. For correct display, please set the base coordinate system and projection such that it matches the UTM zone for which these data were constructed using the NAD 83 datum. Further information about the US National Grid is available from http://www.fgdc.gov/usng and a viewing of these layers as applied to local geography may be seen at the National Map, http://www.nationalmap.gov. The name of each dataset has the following format - StateAbbv_USNG_UTMXX. For example, for the UTM zone 15 of Mississippi, the dataset is named MS_USNG_UTM15.

This layer is the MGRS 100,000m grid that covers Zone 18S which covers part of Maryland.The U.S. National Grid provides a standardized grid reference system that is seamless across jurisdictional boundaries and allows for pinpointing exact locations. Since USNG is standardized, it can be understood and used as a common geographic framework for response. Zone 18S covers part of Maryland. The vertical UTM boundaries are horizontal latitude band boundaries form (generally) 6° X 8° Grid Zones. Hence, the first three letters of the MGRS value, e.g. “18S”, are referred to as the Grid Zone Designator (GZD). The fourth and fifth characters are a pair of letters identifying one of the 100,000-meter grid squares within the grid zone (or UPS area). The "S" in this instance is not to be confused with UTM Zone 18S for UTM in the Southern Hemisphere. There are no classification restrictions on this information. This information was created by the National Geospatial-Intelligence Agency (NGA) Coordinate Systems Analysis Team (SNAC).This is a MD iMAP hosted service layer. Find more information at https://imap.maryland.gov.Feature Service Layer Link:https://mdgeodata.md.gov/imap/rest/services/Location/MD_USNGZone18S/FeatureServer/1

This is a polygon feature data layer of United States National Grid (100m x 100m polygons ) constructed by the Center for Interdisciplinary Geospatial Information Technologies at Delta State University with support from the US Geological Survey under the Cooperative Agreement 07ERAG0083. For correct display, please set the base coordinate system and projection such that it matches the UTM zone for which these data were constructed using the NAD 83 datum. Further information about the US National Grid is available from https://www.fgdc.gov/usng and a viewing of these layers as applied to local geography may be seen at the National Map, https://www.nationalmap.gov.

This is a MGRS 100km Square Identifier polygon shapefile. The polygons are defined by UTM zone and MGRS band letters into mostly 6ºx8º polygons, with subdivisions into MGRS 100km Square Identifiers. There are no classification restrictions on this information. This information was created by the National Geospatial-Intelligence Agency (NGA) Coordinate Systems Analysis Team (SNAC).This is a MD iMAP hosted service layer. Find more information at https://imap.maryland.gov.Feature Service Layer Link:https://mdgeodata.md.gov/imap/rest/services/Location/MD_USNGZone17S/FeatureServer/1

(Link to Metadata) USNGVT is a U.S. National Grid Index (1000m x 1000m) covering Vermont. It is a polygon feature class originally constructed by the Center for Interdisciplinary Geospatial Information Technologies at Delta State University with support from the US Geological Survey under the Cooperative Agreement 07ERAG0083. VCGI merged UTM zone 18 and 19 into a single layer, the projected to VCS NAD83. Further information about the US National Grid is available from http://www.fgdc.gov/usng and a viewing of these layers as applied to local geography may be seen at the National Map, http://www.nationalmap.gov. This dataset includes the USNG grid for parts of Vermont, New Hampshire, Massachusetts and Connecticut that lie in UTM zone 18.

This layer represents a 1,000 by 1,000 meter United States National Grid (USNG) for Florida. The USNG is an alpha-numeric reference system based on the UTM coordinate system and is similar to the Military Grid Reference System. Use of the USNG ensures a uniform grid mapping and positional reporting system for search and rescue, emergency planning, response, and recovery. Please contact GIS.Librarian@floridadep.gov for more information.

USNG is standard that established a nationally consistent grid reference system. It provides a seamless plane coordinate system across jurisdictional boundaries and map scales; it enables precise position referencing with GPS, web map portals, and hardcopy maps. USNG enables a practical system of geoaddresses and a universal map index. This data resides in the GCS 1983 coordinate system and is most suitable for viewing over North America.

This layer shows 1,000 meter grid squares for UTM zone 5.

description: This data set shows the Indiana-portion of the 1000-meter United States National Grid (USNG). The following is excerpted from metadata provided with the original source data set named "IN_USNG_UTM16.SHP": "This is a polygon feature data layer of United States National Grid (1000 m x 1000 m polygons) constructed by the Center for Interdisciplinary Geospatial Information Technologies at Delta State University with support from the US Geological Survey under the Cooperative Agreement 07ERAG0083. For correct display, please set the base coordinate system and projection such that it matches the UTM zone for which these data were constructed using the NAD 83 datum. Further information about the US National Grid is available from http://www.fgdc.gov/usng and a viewing of these layers as applied to local geography may be seen at the National Map, http://www.nationalmap.gov ."; abstract: This data set shows the Indiana-portion of the 1000-meter United States National Grid (USNG). The following is excerpted from metadata provided with the original source data set named "IN_USNG_UTM16.SHP": "This is a polygon feature data layer of United States National Grid (1000 m x 1000 m polygons) constructed by the Center for Interdisciplinary Geospatial Information Technologies at Delta State University with support from the US Geological Survey under the Cooperative Agreement 07ERAG0083. For correct display, please set the base coordinate system and projection such that it matches the UTM zone for which these data were constructed using the NAD 83 datum. Further information about the US National Grid is available from http://www.fgdc.gov/usng and a viewing of these layers as applied to local geography may be seen at the National Map, http://www.nationalmap.gov ."

Download Virginia Grid ShapefilesDownload Virginia Grid GDBGrid REST ServiceThis data represents the map extent for current and historical USGS topographic maps for the United States and Territories, including 1 X 2 Degree, 1 X 1 Degree, 30 X 60 Minute, 15 X 15 Minute, 7.5 X 7.5 Minute, and 3.75 X 3.75 Minute. The grid was generated using ESRI ArcInfo GIS software.