The Digital Geologic-GIS Map of Sagamore Hill National Historic Site and Vicinity, New York is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (sahi_geology.gdb), a 2.) Open Geospatial Consortium (OGC) geopackage, and 3.) 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (sahi_geology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (sahi_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). The OGC geopackage is supported with a QGIS project (.qgz) file. Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) A GIS readme file (sahi_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (sahi_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (sahi_geology_metadata_faq.pdf). Please read the sahi_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. Google Earth software is available for free at: https://www.google.com/earth/versions/. QGIS software is available for free at: https://www.qgis.org/en/site/. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (sahi_geology_metadata.txt or sahi_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:62,500 and United States National Map Accuracy Standards features are within (horizontally) 31.8 meters or 104.2 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in Google Earth, ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

The Digital Geomorphic-GIS Map of Gulf Islands National Seashore (5-meter accuracy and 1-foot resolution 2006-2007 mapping), Mississippi and Florida is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (guis_geomorphology.gdb), a 2.) Open Geospatial Consortium (OGC) geopackage, and 3.) 2.2 KMZ/KML file for use in Google Earth, however, this format version of the map is limited in data layers presented and in access to GRI ancillary table information. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (guis_geomorphology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (guis_geomorphology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). The OGC geopackage is supported with a QGIS project (.qgz) file. Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) A GIS readme file (guis_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (guis_geomorphology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (guis_geomorphology_metadata_faq.pdf). Please read the guis_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. Google Earth software is available for free at: https://www.google.com/earth/versions/. QGIS software is available for free at: https://www.qgis.org/en/site/. Users are encouraged to only use the Google Earth data for basic visualization, and to use the GIS data for any type of data analysis or investigation. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (guis_geomorphology_metadata.txt or guis_geomorphology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:26,000 and United States National Map Accuracy Standards features are within (horizontally) 13.2 meters or 43.3 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in Google Earth, ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

This data provides graphic representation of electric company territories of New Jersey. Data was compiled using Electric Utility paper maps, all greater than 1:500,000. It is anticipated that electric company territorial boundaries will remain stable.

All of the ERS mapping applications, such as the Food Environment Atlas and the Food Access Research Atlas, use map services developed and hosted by ERS as the source for their map content. These map services are open and freely available for use outside of the ERS map applications. Developers can include ERS maps in applications through the use of the map service REST API, and desktop GIS users can use the maps by connecting to the map server directly.

This application provides the public information on our underground assets, particularly water, sanitary and storm features.

A Certificate of Convenience and Necessity (CCN) is issued by the Public Utility Commission of Texas (PUCT), and authorizes a utility to provide water and/or sewer service to a specific service area. The CCN obligates the water or sewer retail public utility to provide continuous and adequate service to every customer who requests service in that area. The maps and digital data provided in the Water and Sewer CCN Viewer delineate the official CCN service areas and CCN facility lines issued by the PUCT and its predecessor agencies. This dataset is a Texas statewide polygon layer of sewer CCN service areas. The CCNs were digitized from Texas Department of Transportation (TxDOT) county mylar maps. The mylar maps were the base maps on which the CCNs were originally drawn and maintained. CCNs are currently created and maintained using digitizing methods, coordinate geography or imported from digital files submitted by the applicant. TxDOT digital county urban road files are used as the base maps on which the CCNs are geo-referenced. It is best to view the sewer CCN service area data in conjunction with the sewer CCN facility line data, since these two layers together represent all of the retail public sewer utilities in Texas.*Important Notes: The CCN spatial dataset and metadata were last updated on: October 4, 2022The official state-wide CCN spatial dataset includes all types of CCN services areas: water and sewer CCN service areas; water and sewer CCN facility lines. This CCN spatial dataset is updated on a quarterly, or as needed basis using Geographic Information System (GIS) software called ArcGIS 10.8.2.The complete state-wide CCN spatial dataset is available for download from the following website: http://www.puc.texas.gov/industry/water/utilities/gis.aspxThe Water and Sewer CCN Viewer may be accessed from the following web site: http://www.puc.texas.gov/industry/water/utilities/map.htmlIf you have questions about this CCN spatial dataset or about CCN mapping requirements, please e-mail CCN Mapping Staff: water@puc.texas.govTYPE - Indicates whether a CCN is considered a water or a sewer system. If the CCN number begins with a '"1", the CCN is considered a water system (utility). If a CCN number begins with a "2", the CCN is considered a sewer system (utility).CCN_NO - A unique five-digit number assigned to each CCN when it is created and approved by the Commission. *CCN number starting with an ‘N’ indicates an exempt utility.UTILITY - The name of the utility which owns the CCN.COUNTY - The name(s) of the county(ies) in which the CCN exist.CCN_TYPE –One of three types:Bounded Service Area: A certificated service area with closed boundaries that often follow identifiable physical and cultural features such as roads, rivers, streams and political boundaries. Facilities +200 Feet: A certificated service area represented by lines. They include a buffer of a specified number of feet (usually 200 feet). The lines normally follow along roads and may or may not correspond to distribution lines or facilities in the ground.Facilities Only: A certificated service area represented by lines. They are granted for a "point of use" that covers only the customer connections at the time the CCN is granted. Facility only service lines normally follow along roads and may or may not correspond to distribution lines or facilities in the ground.STATUS – For pending dockets check the PUC Interchange Filing Search

This mapping tool provides a representation of the general watershed boundaries for stream systems declared fully appropriated by the State Water Board. The boundaries were created by Division of Water Rights staff by delineating FASS critical reaches and consolidating HUC 12 sub-watersheds to form FASS Watershed boundaries. As such, the boundaries are in most cases conservative with respect to the associated stream system. However, users should check neighboring FASS Watersheds to ensure the stream system of interest is not restricted by other FASS listings. For more information regarding the Declaration of Fully Appropriated Stream Systems, visit the Division of Water Rights’ Fully Appropriated Streams webpage. How to Use the Interactive Mapping Tool: If it is your first time viewing the map, you will need to click the “OK” box on the splash screen and agree to the disclaimer before continuing. Navigate to your point of interest by either using the search bar or by zooming in on the map. You may enter a stream name, street address, or watershed ID in the search bar. Click on the map to identify the location of interest and one or more pop-up boxes may appear with information about the fully appropriated stream systems within the general watershed boundaries of the identified location. The information provided in the pop-up box may include: (a) stream name, (b) tributary, (c) season declared fully appropriated, (d) Board Decisions/Water Right Orders, and/or (e) court references/adjudications. You may toggle the FAS Streams reference layer on and off to find representative critical reaches associated with the FASS Watershed layer. Please note that this layer is for general reference purposes only and ultimately the critical reach listed in Appendix A of Water Rights Order 98-08 and Appendix A together with any associated footnotes controls. Note: A separate FAS Watershed boundary layer was created for the Bay-Delta Watershed. The Bay-Delta Watershed layer should be toggled on to check if the area of interest is fully appropriated under State Water Board Decision 1594.

The Digital Geologic-GIS Map of the Mammoth Cave Quadrangle, Kentucky is composed of GIS data layers and GIS tables, and is available in the following GRI-supported GIS data formats: 1.) a 10.1 file geodatabase (macv_geology.gdb), and a 2.) Open Geospatial Consortium (OGC) geopackage. The file geodatabase format is supported with a 1.) ArcGIS Pro map file (.mapx) file (macv_geology.mapx) and individual Pro layer (.lyrx) files (for each GIS data layer), as well as with a 2.) 10.1 ArcMap (.mxd) map document (macv_geology.mxd) and individual 10.1 layer (.lyr) files (for each GIS data layer). Upon request, the GIS data is also available in ESRI 10.1 shapefile format. Contact Stephanie O'Meara (see contact information below) to acquire the GIS data in these GIS data formats. In addition to the GIS data and supporting GIS files, three additional files comprise a GRI digital geologic-GIS dataset or map: 1.) a readme file (maca_abli_geology_gis_readme.pdf), 2.) the GRI ancillary map information document (.pdf) file (maca_abli_geology.pdf) which contains geologic unit descriptions, as well as other ancillary map information and graphics from the source map(s) used by the GRI in the production of the GRI digital geologic-GIS data for the park, and 3.) a user-friendly FAQ PDF version of the metadata (macv_geology_metadata_faq.pdf). Please read the maca_abli_geology_gis_readme.pdf for information pertaining to the proper extraction of the GIS data and other map files. QGIS software is available for free at: https://www.qgis.org/en/site/. The data were completed as a component of the Geologic Resources Inventory (GRI) program, a National Park Service (NPS) Inventory and Monitoring (I&M) Division funded program that is administered by the NPS Geologic Resources Division (GRD). For a complete listing of GRI products visit the GRI publications webpage: For a complete listing of GRI products visit the GRI publications webpage: https://www.nps.gov/subjects/geology/geologic-resources-inventory-products.htm. For more information about the Geologic Resources Inventory Program visit the GRI webpage: https://www.nps.gov/subjects/geology/gri,htm. At the bottom of that webpage is a "Contact Us" link if you need additional information. You may also directly contact the program coordinator, Jason Kenworthy (jason_kenworthy@nps.gov). Source geologic maps and data used to complete this GRI digital dataset were provided by the following: U.S. Geological Survey. Detailed information concerning the sources used and their contribution the GRI product are listed in the Source Citation section(s) of this metadata record (macv_geology_metadata.txt or macv_geology_metadata_faq.pdf). Users of this data are cautioned about the locational accuracy of features within this dataset. Based on the source map scale of 1:24,000 and United States National Map Accuracy Standards features are within (horizontally) 12.2 meters or 40 feet of their actual location as presented by this dataset. Users of this data should thus not assume the location of features is exactly where they are portrayed in ArcGIS, QGIS or other software used to display this dataset. All GIS and ancillary tables were produced as per the NPS GRI Geology-GIS Geodatabase Data Model v. 2.3. (available at: https://www.nps.gov/articles/gri-geodatabase-model.htm).

Web mapping application containing utility information for Sioux Falls, South Dakota.

This online map contains utility infrastructure features published by the Natrona Regional Geospatial Cooperative (NRGC).

Web Map illustration of Garbage Service Area Boundary described in the certificated authority issued to Solid Waste Companies by Utilities and Transportation Commission (UTC). For additional information and questions pertaining to solid waste certificate coverage and issuance please, contact the UTC Licensing Section, 360-664-1223,

Link to AMAFCA site with stormwater maps and data features are available, including shapefiles and interactive maps.

Nielsen PrimeLocation Web and Desktop Software Licensed for Internal Use only: Pop-Facts Demographics Database, Geographic Mapping Data Layers, Geo-Coding locations.

This feature class represents electric power retail service territories. These are areas serviced by electric power utilities responsible for the retail sale of electric power to local customers, whether residential, industrial, or commercial. The following updates have been made since the previous release: 7 features added, numerous geometries improved, and geographic coverage expanded to include American Samoa, Guam, Northern Mariana Islands, and Virgin Islands.

In 2012, the CPUC ordered the development of a statewide map that is designed specifically for the purpose of identifying areas where there is an increased risk for utility associated wildfires. The development of the CPUC -sponsored fire-threat map, herein "CPUC Fire-Threat Map," started in R.08-11-005 and continued in R.15-05-006.

A multistep process was used to develop the statewide CPUC Fire-Threat Map. The first step was to develop Fire Map 1 (FM 1), an agnostic map which depicts areas of California where there is an elevated hazard for the ignition and rapid spread of powerline fires due to strong winds, abundant dry vegetation, and other environmental conditions. These are the environmental conditions associated with the catastrophic powerline fires that burned 334 square miles of Southern California in October 2007. FM 1 was developed by CAL FIRE and adopted by the CPUC in Decision 16-05-036.

FM 1 served as the foundation for the development of the final CPUC Fire-Threat Map. The CPUC Fire-Threat Map delineates, in part, the boundaries of a new High Fire-Threat District (HFTD) where utility infrastructure and operations will be subject to stricter fire‑safety regulations. Importantly, the CPUC Fire-Threat Map (1) incorporates the fire hazards associated with historical powerline wildfires besides the October 2007 fires in Southern California (e.g., the Butte Fire that burned 71,000 acres in Amador and Calaveras Counties in September 2015), and (2) ranks fire-threat areas based on the risks that utility-associated wildfires pose to people and property.

Primary responsibility for the development of the CPUC Fire-Threat Map was delegated to a group of utility mapping experts known as the Peer Development Panel (PDP), with oversight from a team of independent experts known as the Independent Review Team (IRT). The members of the IRT were selected by CAL FIRE and CAL FIRE served as the Chair of the IRT. The development of CPUC Fire-Threat Map includes input from many stakeholders, including investor-owned and publicly owned electric utilities, communications infrastructure providers, public interest groups, and local public safety agencies.

The PDP served a draft statewide CPUC Fire-Threat Map on July 31, 2017, which was subsequently reviewed by the IRT. On October 2 and October 5, 2017, the PDP filed an Initial CPUC Fire-Threat Map that reflected the results of the IRT's review through September 25, 2017. The final IRT-approved CPUC Fire-Threat Map was filed on November 17, 2017. On November 21, 2017, SED filed on behalf of the IRT a summary report detailing the production of the CPUC Fire-Threat Map(referenced at the time as Fire Map 2). Interested parties were provided opportunity to submit alternate maps, written comments on the IRT-approved map and alternate maps (if any), and motions for Evidentiary Hearings. No motions for Evidentiary Hearings or alternate map proposals were received. As such, on January 19, 2018 the CPUC adopted, via Safety and Enforcement Division's (SED) disposition of a Tier 1 Advice Letter, the final CPUC Fire-Threat Map.

Additional information can be found here.

Energy and utilities data from the Alaska Energy Authority, Alaska Energy Data Gateway. Includes: - Hydroelectric - Hydrokinetic - Wind Power - Thermal Areas - Hot Springs - Sawmills - Energy Regions - Electric Utility Lines - TAPS Pipeline - Volanoes and Vents - Solar PowerSource: Alaska Energy AuthorityThis data is provided as a service in the DCRA Information Portal by the Alaska Department of Commerce, Community, and Economic Development Division of Community and Regional Affairs (SOA DCCED DCRA), Research and Analysis section. SOA DCCED DCRA Research and Analysis is not the authoritative source for this data. For more information and for questions about this data, see: Alaska Energy Data Gateway

In 2012, the CPUC ordered the development of a statewide map that is designed specifically for the purpose of identifying areas where there is an increased risk for utility associated wildfires. The development of the CPUC -sponsored fire-threat map, herein "CPUC Fire-Threat Map," started in R.08-11-005 and continued in R.15-05-006.

A multistep process was used to develop the statewide CPUC Fire-Threat Map. The first step was to develop Fire Map 1 (FM 1), an agnostic map which depicts areas of California where there is an elevated hazard for the ignition and rapid spread of powerline fires due to strong winds, abundant dry vegetation, and other environmental conditions. These are the environmental conditions associated with the catastrophic powerline fires that burned 334 square miles of Southern California in October 2007. FM 1 was developed by CAL FIRE and adopted by the CPUC in Decision 16-05-036.

FM 1 served as the foundation for the development of the final CPUC Fire-Threat Map. The CPUC Fire-Threat Map delineates, in part, the boundaries of a new High Fire-Threat District (HFTD) where utility infrastructure and operations will be subject to stricter fire‑safety regulations. Importantly, the CPUC Fire-Threat Map (1) incorporates the fire hazards associated with historical powerline wildfires besides the October 2007 fires in Southern California (e.g., the Butte Fire that burned 71,000 acres in Amador and Calaveras Counties in September 2015), and (2) ranks fire-threat areas based on the risks that utility-associated wildfires pose to people and property.

Primary responsibility for the development of the CPUC Fire-Threat Map was delegated to a group of utility mapping experts known as the Peer Development Panel (PDP), with oversight from a team of independent experts known as the Independent Review Team (IRT). The members of the IRT were selected by CAL FIRE and CAL FIRE served as the Chair of the IRT. The development of CPUC Fire-Threat Map includes input from many stakeholders, including investor-owned and publicly owned electric utilities, communications infrastructure providers, public interest groups, and local public safety agencies.

The PDP served a draft statewide CPUC Fire-Threat Map on July 31, 2017, which was subsequently reviewed by the IRT. On October 2 and October 5, 2017, the PDP filed an Initial CPUC Fire-Threat Map that reflected the results of the IRT's review through September 25, 2017. The final IRT-approved CPUC Fire-Threat Map was filed on November 17, 2017. On November 21, 2017, SED filed on behalf of the IRT a summary report detailing the production of the CPUC Fire-Threat Map(referenced at the time as Fire Map 2). Interested parties were provided opportunity to submit alternate maps, written comments on the IRT-approved map and alternate maps (if any), and motions for Evidentiary Hearings. No motions for Evidentiary Hearings or alternate map proposals were received. As such, on January 19, 2018 the CPUC adopted, via Safety and Enforcement Division's (SED) disposition of a Tier 1 Advice Letter, the final CPUC Fire-Threat Map.

Additional information can be found here.

This dataset shows electric utility service area boundaries for the State of Minnesota. The original source data were lines hand-drawn on county highway maps. The maps were scanned and georeferenced to serve as a background for on-screen digitizing. The utilities were then given an opportunity to review and correct the service areas. Changes filed with the Public Utilities Commission (eDockets) were also reviewed to update the areas. This version of the dataset reflects boundary changes through 12/01/15, as well as changes resulting from the transfer of Alliant Energy's service territories to 12 southern Minnesota cooperatives in early 2016.

This dataset contains water infrastructure locations within the Bellevue service area. The dataset includes individual components such as meters, fittings, valves, fire flow, hydrants, interties, pumps, inlet stations, reservoirs, sampling stations, pipes, casings, vaults, and structures. Data within high-security areas has been redacted to ensure safety and security. This comprehensive dataset is essential for managing, maintaining, and planning the city's water supply and distribution system, as well as for emergency response and infrastructure development purposes.

This application shows sewer, water, and storm utilities in the City of Winchester, Virginia.