Download In State Plane Projection Here The 2017 Digital Terrain Model (DTM) is a 2 foot pixel resolution raster in Erdas IMG format. This was created using the ground (class = 2) lidar points and incorporating the breaklines. The DTMs were developed using LiDAR data. LiDAR is an acronym for LIght Detection And Ranging. Light detection and ranging is the science of using a laser to measure distances to specific points. A specially equipped airplane with positioning tools and LiDAR technology was used to measure the distance to the surface of the earth to determine ground elevation. The classified points were developed using data collected in April to May 2017. The LiDAR points, specialized software, and technology provide the ability to create a high precision three-dimensional digital elevation and/or terrain models (DEM/DTM). The use of LiDAR significantly reduces the cost for developing this information. The DTMs are intended to correspond to the orthometric heights of the bare surface of the county (no buildings or vegetation cover). DTM data is used by county agencies to study drainage issues such as flooding and erosion; contour generation; slope and aspect; and hill shade images. This dataset was compiled to meet the American Society for Photogrammetry and Remote Sensing (ASPRS) Accuracy Standards for Large-Scale Maps, CLASS 1 map accuracy. The U.S. Army Corps of Engineers Engineering and Design Manual for Photogrammetric Production recommends that data intended for this usage scale be used for any of the following purposes: route _location, preliminary alignment and design, preliminary project planning, hydraulic sections, rough earthwork estimates, or high-gradient terrain / low unit cost earthwork excavation estimates. The manual does not recommend that these data be used for final design, excavation and grading plans, earthwork computations for bid estimates or contract measurement and payment. This dataset does not take the place of an on-site survey for design, construction or regulatory purposes.

Download In State Plane Projection Here The 2017 Digital Terrain Model (DTM) is a 2 foot pixel resolution raster in Erdas IMG format. This was created using the ground (class = 2) lidar points and incorporating the breaklines. The DTMs were developed using LiDAR data. LiDAR is an acronym for LIght Detection And Ranging. Light detection and ranging is the science of using a laser to measure distances to specific points. A specially equipped airplane with positioning tools and LiDAR technology was used to measure the distance to the surface of the earth to determine ground elevation. The classified points were developed using data collected in April to May 2017. The LiDAR points, specialized software, and technology provide the ability to create a high precision three-dimensional digital elevation and/or terrain models (DEM/DTM). The use of LiDAR significantly reduces the cost for developing this information. The DTMs are intended to correspond to the orthometric heights of the bare surface of the county (no buildings or vegetation cover). DTM data is used by county agencies to study drainage issues such as flooding and erosion; contour generation; slope and aspect; and hill shade images. This dataset was compiled to meet the American Society for Photogrammetry and Remote Sensing (ASPRS) Accuracy Standards for Large-Scale Maps, CLASS 1 map accuracy. The U.S. Army Corps of Engineers Engineering and Design Manual for Photogrammetric Production recommends that data intended for this usage scale be used for any of the following purposes: route location, preliminary alignment and design, preliminary project planning, hydraulic sections, rough earthwork estimates, or high-gradient terrain / low unit cost earthwork excavation estimates. The manual does not recommend that these data be used for final design, excavation and grading plans, earthwork computations for bid estimates or contract measurement and payment. This dataset does not take the place of an on-site survey for design, construction or regulatory purposes.

Download In State Plane Projection Here The 2017 Digital Terrain Model (DTM) is a 2 foot pixel resolution raster in Erdas IMG format. This was created using the ground (class = 2) lidar points and incorporating the breaklines. The DTMs were developed using LiDAR data. LiDAR is an acronym for LIght Detection And Ranging. Light detection and ranging is the science of using a laser to measure distances to specific points. A specially equipped airplane with positioning tools and LiDAR technology was used to measure the distance to the surface of the earth to determine ground elevation. The classified points were developed using data collected in April to May 2017. The LiDAR points, specialized software, and technology provide the ability to create a high precision three-dimensional digital elevation and/or terrain models (DEM/DTM). The use of LiDAR significantly reduces the cost for developing this information. The DTMs are intended to correspond to the orthometric heights of the bare surface of the county (no buildings or vegetation cover). DTM data is used by county agencies to study drainage issues such as flooding and erosion; contour generation; slope and aspect; and hill shade images. This dataset was compiled to meet the American Society for Photogrammetry and Remote Sensing (ASPRS) Accuracy Standards for Large-Scale Maps, CLASS 1 map accuracy. The U.S. Army Corps of Engineers Engineering and Design Manual for Photogrammetric Production recommends that data intended for this usage scale be used for any of the following purposes: route _location, preliminary alignment and design, preliminary project planning, hydraulic sections, rough earthwork estimates, or high-gradient terrain / low unit cost earthwork excavation estimates. The manual does not recommend that these data be used for final design, excavation and grading plans, earthwork computations for bid estimates or contract measurement and payment. This dataset does not take the place of an on-site survey for design, construction or regulatory purposes.

Download In State Plane Projection Here The 2017 Digital Terrain Model (DTM) is a 2 foot pixel resolution raster in Erdas IMG format. This was created using the ground (class = 2) lidar points and incorporating the breaklines. The DTMs were developed using LiDAR data. LiDAR is an acronym for LIght Detection And Ranging. Light detection and ranging is the science of using a laser to measure distances to specific points. A specially equipped airplane with positioning tools and LiDAR technology was used to measure the distance to the surface of the earth to determine ground elevation. The classified points were developed using data collected in April to May 2017. The LiDAR points, specialized software, and technology provide the ability to create a high precision three-dimensional digital elevation and/or terrain models (DEM/DTM). The use of LiDAR significantly reduces the cost for developing this information. The DTMs are intended to correspond to the orthometric heights of the bare surface of the county (no buildings or vegetation cover). DTM data is used by county agencies to study drainage issues such as flooding and erosion; contour generation; slope and aspect; and hill shade images. This dataset was compiled to meet the American Society for Photogrammetry and Remote Sensing (ASPRS) Accuracy Standards for Large-Scale Maps, CLASS 1 map accuracy. The U.S. Army Corps of Engineers Engineering and Design Manual for Photogrammetric Production recommends that data intended for this usage scale be used for any of the following purposes: route location, preliminary alignment and design, preliminary project planning, hydraulic sections, rough earthwork estimates, or high-gradient terrain / low unit cost earthwork excavation estimates. The manual does not recommend that these data be used for final design, excavation and grading plans, earthwork computations for bid estimates or contract measurement and payment. This dataset does not take the place of an on-site survey for design, construction or regulatory purposes.