Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

BF Screened from Japan were selected based on the following criterion: Location: Hokkaido Tokachi (JA Memuro, JA Otofuke, JA Tokachi Shimizu, JA Obihiro Taisho) --> initially focus on Memuro, Otofuke, Tokachi Shimizu, Obihiro Taisho // Added locations in GGP 2015 due to change of RF: Obhiro, Kamikawa, Abashiri
BF: no use of in furrow application (Amigo) - no use of Amistar

Contract farmers of snacks and other food companies --> screening question: 'Do you have quality contracts in place with snack and food companies for your potato production? Y/N --> if no, screen out

Increase of marketable yield --> screening question: 'Are you interested in growing branded potatoes (premium potatoes for processing industry)? Y/N --> if no, screen out

Potato growers for process use
Background info: No mention of Syngenta Background info: - Labor cost is very serious issue: In general, labor cost in Japan is very high. Growers try to reduce labor cost by mechanization. Percentage of labor cost in production cost. They would like to manage cost of labor - Quality and yield driven

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab

Cleaning operations

Data processing:

Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers: o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) o Kynetec cross validates the answers of the growers in three different ways: 1. Within the grower (check if growers respond consistently during the interview) 2. Across years (check if growers respond consistently throughout the years) 3. Within cluster (compare a grower's responses with those of others in the group) o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the questionnaire was redesigned to be more precise and obtain data by individual fertilizer products. The new method of measuring fertilizer inputs leads to more accurate results, but also makes a year-on-year comparison difficult. After evaluating several solutions to this problems, 2014 fertilizer usage (NPK input) was re-estimated by calculating a weighted average of fertilizer usage in the following years.

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National Coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

BF Screened from Peru were selected based on the following criterion:

(a) smallholder potato growers Location: Huara, Barranca, Cañete (Canta Gallo),Huanuco Med Tech Adoption: -productivity 20T/Ha -CP usage -traditional growers: minimum tillage, use a mix of generic and CP quality products

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab

Cleaning operations

Data processing:

Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

B. Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers:

o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) 
o Kynetec cross validates the answers of the growers in three different ways: 
  1. Within the grower (check if growers respond consistently during the interview) 
  2. Across years (check if growers respond consistently throughout the years) 
  3. Within cluster (compare a grower's responses with those of others in the group) 

o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the questionnaire was redesigned to be more precise and obtain data by individual fertilizer products. The new method of measuring fertilizer inputs leads to more accurate results, but also makes a year-on-year comparison difficult. After evaluating several solutions to this problems, 2014 fertilizer usage (NPK input) was re-estimated by calculating a weighted average of fertilizer usage in the following years.

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

Screening of Argentina BF: No screening applicable (BF are actually the RF fields where no Syngenta program is adopted)

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab

Cleaning operations

Data processing:

Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers: o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) o Kynetec cross validates the answers of the growers in three different ways: 1. Within the grower (check if growers respond consistently during the interview) 2. Across years (check if growers respond consistently throughout the years) 3. Within cluster (compare a grower's responses with those of others in the group) o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the questionnaire was redesigned to be more precise and obtain data by individual fertilizer products. The new method of measuring fertilizer inputs leads to more accurate results, but also makes a year-on-year comparison difficult. After evaluating several solutions to this problems, 2014 fertilizer usage (NPK input) was re-estimated by calculating a weighted average of fertilizer usage in the following years.

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

BF Screened from Hungary were selected based on the following criterion: - At least three of the four target crops should be cultivated in rotation on the same field. - Counties: Fejér, Somogy, Tolna, Komárom (+ added county in 2014: Bács)
- Reference farms profile:

Current practice: Predominantly convential tillage Machinery: most have a quite complete machinery set-up including chisels

• Benchmark farms profile: > cannot be Contivo growers > pure ploughing equipment. (don't need to use chisels) > benchmark growers that are already using a substantial amount of conservation tillage were not selected

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab

Cleaning operations

Data processing:

Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers: o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) o Kynetec cross validates the answers of the growers in three different ways: 1. Within the grower (check if growers respond consistently during the interview) 2. Across years (check if growers respond consistently throughout the years) 3. Within cluster (compare a grower's responses with those of others in the group) o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the questionnaire was redesigned to be more precise and obtain data by individual fertilizer products. The new method of measuring fertilizer inputs leads to more accurate results, but also makes a year-on-year comparison difficult. After evaluating several solutions to this problems, 2014 fertilizer usage (NPK input) was re-estimated by calculating a weighted average of fertilizer usage in the following years.

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

Screening of Honduras BF: Location: Las Limas (Alauca, El Paraíso) Low Tech Adoption (No renewal of coffee plants (changed: not a screener) No rust resistant new varieties adoption (changed: not a screener) No fertilization plan and low density of planting)

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab

Cleaning operations

Data processing:

Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers: o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) o Kynetec cross validates the answers of the growers in three different ways: 1. Within the grower (check if growers respond consistently during the interview) 2. Across years (check if growers respond consistently throughout the years) 3. Within cluster (compare a grower's responses with those of others in the group) o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the questionnaire was redesigned to be more precise and obtain data by individual fertilizer products. The new method of measuring fertilizer inputs leads to more accurate results, but also makes a year-on-year comparison difficult. After evaluating several solutions to this problems, 2014 fertilizer usage (NPK input) was re-estimated by calculating a weighted average of fertilizer usage in the following years.

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National Coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

Screening of Honduras BF: Location: Las Limas (Alauca, El Paraíso) Low Tech Adoption (No renewal of coffee plants (changed: not a screener) No rust resistant new varieties adoption (changed: not a screener) No fertilization plan and low density of planting)

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab

Cleaning operations

Data processing:

Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

B. Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers:

o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) 
o Kynetec cross validates the answers of the growers in three different ways: 
  1. Within the grower (check if growers respond consistently during the interview) 
  2. Across years (check if growers respond consistently throughout the years) 
  3. Within cluster (compare a grower's responses with those of others in the group) 

o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the questionnaire was redesigned to be more precise and obtain data by individual fertilizer products. The new method of measuring fertilizer inputs leads to more accurate results, but also makes a year-on-year comparison difficult. After evaluating several solutions to this problems, 2014 fertilizer usage (NPK input) was re-estimated by calculating a weighted average of fertilizer usage in the following years.

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

BF Screened from Spain were selected based on the following criterion:

(a) Pepper growers (Province Almeria): - Passive greenhouse
- Part of a integrated producer or cooperative
- Exported orientated
- RF producing variety 'Melchor'

-> Integrated producers: those that integrate the production & exportation of crops. They own the land and buy production outside to fulfill market demands. This is different from cooperatives as this ones only buy production to small farmers associated to them, they don't own land, they are intermediates to sell farmer production. -> Professionals, marketing oriented, direct link to foodchain (It means that Cooperatives or Integrated Producers sell directly to supermarkets or traders in Europe) - innovators (early adopters)
- Sell production to cooperatives and growers receive technical support, varieties, recommendations ( from cooperatives).

(b) Tomato growers (Province Almeria): - Passive greenhouse
- part of a integrated producer or cooperative
- Exported orientated
- RF producing variety 'Caniles'
-> Integrated producers: those that integrate the production & exportation of crops. They own the land and buy production outside to fulfill market demands. This is different from cooperatives as this ones only buy production to small farmers associated to them, they don't own land, they are intermediates to sell farmer production. -> Professionals, marketing oriented, direct link to foodchain (It means that Cooperatives or Integrated Producers sell directly to supermarkets or traders in Europe) - innovators (early adopters)
Sell production to cooperatives and growers receive technical support, varieties, recommendations ( from cooperatives).

(c) Medium/Large growers (Province: Andalucía (Cities: Cádiz, Huelva, Sevilla, Córdoba): - Full time farmers - Growing sunflowers and cereals as main income source
- Open minded: they are open to introduce new varieties, they adopt new technologies in a fast way, but it's still a crop where there is a low input of technology available.
- High input spending (background info: this crop is of low investment, they don't do irrigation, only a cheap herbicide and some fertilizers, so it's not a crop where nowadays they invest more, unless you give more productive seeds.)
- Need to identify benchmark farms that have similar size but use local practices. (i.e. Planting date later )
- Early adopters of new technologies
- Benchmark grower can use HTC seeds. This is only 5% of the market, so only 5% use this and 95% use non HTC seeds, due to more productivity. Our variety will bring HTC tolerace + productivity, so farmer will get a reduction on costs + increase in yield, to increase gains.

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab

Cleaning operations

Data processing: Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers: o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) o Kynetec cross validates the answers of the growers in three different ways: 1. Within the grower (check if growers respond consistently during the interview) 2. Across years (check if growers respond consistently throughout the years) 3. Within cluster (compare a grower's responses with those of others in the group) o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

BF Screened from Philippines were selected based on the following criterion: (a) smallholder rice growers Location: Luzon - Mindoro (Southern Luzon) mid-tier (sub-optimal CP/SE use): mid-tier growers use generic CP, cheaper CP, non hybrid (conventional) seeds
Smallholder farms with average to high levels of mechanization
Should be Integrated Pest Management advocates
less accessible to technology: poor farmers, don't have the money to buy quality seeds, fertilizers,... Don't use machinery yet
simple knowledge on agronomy and pests
influenced by fellow farmers and retailers
not strong financial status: don't have extra money on bank account and so need longer credit to pay (as a consequence: interest increases) may need longer credit

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab.

Cleaning operations

Data processing:

Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers: o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) o Kynetec cross validates the answers of the growers in three different ways: 1. Within the grower (check if growers respond consistently during the interview) 2. Across years (check if growers respond consistently throughout the years) 3. Within cluster (compare a grower's responses with those of others in the group) o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the questionnaire was redesigned to be more precise and obtain data by individual fertilizer products. The new method of measuring fertilizer inputs leads to more accurate results, but also makes a year-on-year comparison difficult. After evaluating several solutions to this problems, 2014 fertilizer usage (NPK input) was re-estimated by calculating a weighted average of fertilizer usage in the following years.

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National Coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

BF Screened from Netherlands were selected based on the following criterion:

(a) Large apple growers Using combination of chemical and biological crop protection products (exclude exclusively biological growers)
Location: Zeeland, South-Holland, Gelderland, Noord-Brabant (some specific locations: Fijnaart, Ommeren, Nieuwerkerk, Zevenberschenhoek, Almkerk, Wadenoijen, Meteren, Krabbendijke, Wemeldinge) Cultivating apples for the late market (=not sold immediately after harvest)
Apple trees should be at least 4 years old (otherwise, they are not fully productive yet)
Background info: no need for specific production to distributor

(b) Large pear growers Using combination of chemical and biological crop protection products (exclude exclusively biological growers)
Location: Zeeland, South-Holland, Gelderland, Noord-Brabant (some specific locations: Fijnaart, Ommeren, Nieuwerkerk, Zevenberschenhoek, Almkerk, Wadenoijen, Meteren, Krabbendijke, Wemeldinge) Cultivating pears for the late market (=not sold immediately after harvest) Pear trees should be at least 6 years old (otherwise, they are not fully productive yet)
Background info: no need for specific production to distributor

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab

Cleaning operations

Data processing:

Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

B. Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers:

o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) 
o Kynetec cross validates the answers of the growers in three different ways: 
  1. Within the grower (check if growers respond consistently during the interview) 
  2. Across years (check if growers respond consistently throughout the years) 
  3. Within cluster (compare a grower's responses with those of others in the group) 

o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the questionnaire was redesigned to be more precise and obtain data by individual fertilizer products. The new method of measuring fertilizer inputs leads to more accurate results, but also makes a year-on-year comparison difficult. After evaluating several solutions to this problems, 2014 fertilizer usage (NPK input) was re-estimated by calculating a weighted average of fertilizer usage in the following years.

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

BF Screened from Indonesia were selected based on the following criterion: (a) Corn growers in East Java - Location: East Java (Kediri and Probolinggo) and Aceh
- Innovative (early adopter); Progressive (keen to learn about agronomy and pests; willing to try new technology); Loyal (loyal to technology that can help them)
- making of technical drain (having irrigation system)
- marketing network for corn: post-harvest access to market (generally they sell 80% of their harvest)
- mid-tier (sub-optimal CP/SE use)
- influenced by fellow farmers and retailers
- may need longer credit

(b) Rice growers in West and East Java - Location: West Java (Tasikmalaya), East Java (Kediri), Central Java (Blora, Cilacap, Kebumen), South Lampung
- The growers are progressive (keen to learn about agronomy and pests; willing to try new technology)
- Accustomed in using farming equipment and pesticide. (keen to learn about agronomy and pests; willing to try new technology) - A long rice cultivating experience in his area (lots of experience in cultivating rice)
- willing to move forward in order to increase his productivity (same as progressive)
- have a soil that broad enough for the upcoming project
- have influence in his group (ability to influence others) - mid-tier (sub-optimal CP/SE use)
- may need longer credit

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab

Cleaning operations

Data processing:

Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers: o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) o Kynetec cross validates the answers of the growers in three different ways: 1. Within the grower (check if growers respond consistently during the interview) 2. Across years (check if growers respond consistently throughout the years) 3. Within cluster (compare a grower's responses with those of others in the group) o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the questionnaire was redesigned to be more precise and obtain data by individual fertilizer products. The new method of measuring fertilizer inputs leads to more accurate results, but also makes a year-on-year comparison difficult. After evaluating several solutions to this problems, 2014 fertilizer usage (NPK input) was re-estimated by calculating a weighted average of fertilizer usage in the following years.

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National Coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

Screened Bangladesh BF were from Jessore, Rajshahi, Rangpur, Bogra, Comilla and Mymensingh and were selected based on the following criterion: - Rice growers
- Partly smallholder
- Professional farmer with rice being main income source
- Manual planting and harvesting. But land preparation and threshing are mechanized.
- Receive tech supports from SYT FFs, CP suppliers or dealers
- Hire labor
- Leading local farmer
- Using SYT products (read remark in next column)
- Loyal to SYT (only for RF - read remark in next column)
- Rice to rice rotation

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab

Cleaning operations

Data processing:

Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

B. Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers:

o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) 
o Kynetec cross validates the answers of the growers in three different ways: 
  1. Within the grower (check if growers respond consistently during the interview) 
  2. Across years (check if growers respond consistently throughout the years) 
  3. Within cluster (compare a grower's responses with those of others in the group) 

o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the questionnaire was redesigned to be more precise and obtain data by individual fertilizer products. The new method of measuring fertilizer inputs leads to more accurate results, but also makes a year-on-year comparison difficult. After evaluating several solutions to this problems, 2014 fertilizer usage (NPK input) was re-estimated by calculating a weighted average of fertilizer usage in the following years.

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

BF Screened from Netherlands were selected based on the following criterion: (a) Large apple growers Using combination of chemical and biological crop protection products (exclude exclusively biological growers)
Location: Zeeland, South-Holland, Gelderland, Noord-Brabant (some specific locations: Fijnaart, Ommeren, Nieuwerkerk, Zevenberschenhoek, Almkerk, Wadenoijen, Meteren, Krabbendijke, Wemeldinge) Cultivating apples for the late market (=not sold immediately after harvest)
Apple trees should be at least 4 years old (otherwise, they are not fully productive yet)
Background info: no need for specific production to distributor

(b) Large pear growers Using combination of chemical and biological crop protection products (exclude exclusively biological growers)
Location: Zeeland, South-Holland, Gelderland, Noord-Brabant (some specific locations: Fijnaart, Ommeren, Nieuwerkerk, Zevenberschenhoek, Almkerk, Wadenoijen, Meteren, Krabbendijke, Wemeldinge) Cultivating pears for the late market (=not sold immediately after harvest) Pear trees should be at least 6 years old (otherwise, they are not fully productive yet)
Background info: no need for specific production to distributor

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab.

Cleaning operations

Data processing:

Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers: o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) o Kynetec cross validates the answers of the growers in three different ways: 1. Within the grower (check if growers respond consistently during the interview) 2. Across years (check if growers respond consistently throughout the years) 3. Within cluster (compare a grower's responses with those of others in the group) o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the questionnaire was redesigned to be more precise and obtain data by individual fertilizer products. The new method of measuring fertilizer inputs leads to more accurate results, but also makes a year-on-year comparison difficult. After evaluating several solutions to this problems, 2014 fertilizer usage (NPK input) was re-estimated by calculating a weighted average of fertilizer usage in the following years.

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

BF Screened from Mexico were selected based on the following criterion: (a) Smallholder maize growers Lagunillas (Guanajuato) and Atecucario (Michoacán) and Cuyoaco (Puebla) Weed control
Low to mid tech corn growers

(a) Smallholder tomato growers Tlayacapan (Morelos) Low Tech (Open Field, Sell on The Farm, use old CP portfolios, from Subsistence to small trading)
Tomato growers in Morelos, Tlayacapan

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab

Cleaning operations

Data processing:

Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers: o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) o Kynetec cross validates the answers of the growers in three different ways: 1. Within the grower (check if growers respond consistently during the interview) 2. Across years (check if growers respond consistently throughout the years) 3. Within cluster (compare a grower's responses with those of others in the group) o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the questionnaire was redesigned to be more precise and obtain data by individual fertilizer products. The new method of measuring fertilizer inputs leads to more accurate results, but also makes a year-on-year comparison difficult. After evaluating several solutions to this problems, 2014 fertilizer usage (NPK input) was re-estimated by calculating a weighted average of fertilizer usage in the following years.

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

Screening of Australia BF: (a) wheat growers Mixed crops including both wheat and barley Professional farmers, full time on the farm No-till/Minimum till system Both wheat and barley
A good understanding of soil disease status of their paddocks (Rhizoctonia) A good understanding of the resistance status of weeds on their property, and an integrated approach to weed management.

Location: Bordertown, Wimmera, Victoria --> cut off: 1500-4000 ha (farm size)
Location: Victoria slopes region, Riverina, New South Wales, Central region --> cut off: 1400 ha (farm size)
Location: Avon Valley, Western Australia - Artea from Bolgart to Kelleberrin, Quairading to Brookton and York --> Cut-off: 150-3500 ha (farm size)

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab

Cleaning operations

Data processing:

Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers: o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) o Kynetec cross validates the answers of the growers in three different ways: 1. Within the grower (check if growers respond consistently during the interview) 2. Across years (check if growers respond consistently throughout the years) 3. Within cluster (compare a grower's responses with those of others in the group) o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the questionnaire was redesigned to be more precise and obtain data by individual fertilizer products. The new method of measuring fertilizer inputs leads to more accurate results, but also makes a year-on-year comparison difficult. After evaluating several solutions to this problems, 2014 fertilizer usage (NPK input) was re-estimated by calculating a weighted average of fertilizer usage in the following years.

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a "quota based random sampling" procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

BF Screened from Thailand were selected based on the following criterion: (a) smallholder rice growers Region 1: Sathan sub-district, Chiengkhong district, Chiengrai Region 2: Banhan, Kwao sub-district, Selapoom district, Roi Ed Continue to do Dry season for 3-4 years.
After wet season rice harvesting, they normally continue dry season rice
Favorite rice seed : Pitsanulok 2
Technology level: Herbicide (they do not use other CP products unless the problems occur)
Innovatives : Open to new technology but financially sluggish due to Government's rice pledge program
Majority is rice farmer. Few field corn farmer
Mid-tier (sub-optimal CP/SE use): mid-tier growers use generic CP, cheaper CP, non hybrid (conventional) seeds
less accessible to technology: poor farmers, don't have the money to buy quality seeds, fertilizers,... Don't use machinery yet influenced by fellow farmers and retailers
not strong financial status: don't have extra money on bank account and so need longer credit to pay (as a consequence: interest increases) may need longer credit

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab

Cleaning operations

Data processing:

Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers: o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) o Kynetec cross validates the answers of the growers in three different ways: 1. Within the grower (check if growers respond consistently during the interview) 2. Across years (check if growers respond consistently throughout the years) 3. Within cluster (compare a grower's responses with those of others in the group) o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the questionnaire was redesigned to be more precise and obtain data by individual fertilizer products. The new method of measuring fertilizer inputs leads to more accurate results, but also makes a year-on-year comparison difficult. After evaluating several solutions to this problems, 2014 fertilizer usage (NPK input) was re-estimated by calculating a weighted average of fertilizer usage in the following years.

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

BF Screened from Brazil were from Cerrado, Goias, Minas and Gerais and were selected based on the following criterion: - Small and medium growers: less or equal to 2000ha of soybean

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab

Cleaning operations

Data processing:

Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers: o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) o Kynetec cross validates the answers of the growers in three different ways: 1. Within the grower (check if growers respond consistently during the interview) 2. Across years (check if growers respond consistently throughout the years) 3. Within cluster (compare a grower's responses with those of others in the group) o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the questionnaire was redesigned to be more precise and obtain data by individual fertilizer products. The new method of measuring fertilizer inputs leads to more accurate results, but also makes a year-on-year comparison difficult. After evaluating several solutions to this problems, 2014 fertilizer usage (NPK input) was re-estimated by calculating a weighted average of fertilizer usage in the following years.

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

Screening of Jordan BF: (a) tomato 1+3 growers Region: Jordan Valley
Farm holder grower (own their farms and consider this as their sole living source)
Indeterminate tomato under greenhouse/tunnels
Commercial grower for export and local consumption
Labors hands needs (=labor shortage)
Adaptability to acquire innovative solutions - Innovative growers
High level of tech adoption (They are willing to leverage their skills and to adopt new technologies, learning their stuff on how to spray pesticides, how to use the best fertilizer program in order to have better yields.)
Drip irrigation use Price constraint and price sensitive growers
Need to identify benchmark farms that have similar size but adopt technological practices. Rotation with the same crop is common (= screening criteria).
Adopt Syngenta products and services (only for RF)

(b) tomato 2 growers Region: Safi Area
Farm holder grower (own their farms and consider this as their sole living source)
Open field Determinate Tomato farm
Commercial grower for local consumption and for export (to Gulf countries)
Labors hands needs (=labor shortage)
Adaptability to acquire innovative solutions
High level of tech adoption (They are willing to leverage their skills and to adopt new technologies, learning their stuff on how to spray pesticides, how to use the best fertilizer program in order to have better yields.)
Drip irrigation use Price constraint and price sensitive growers
Need to identify benchmark farms that have similar size but adopt technological practices. Rotation with watermelon is common (=screening criteria).

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab

Cleaning operations

Data processing:

Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers: o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) o Kynetec cross validates the answers of the growers in three different ways: 1. Within the grower (check if growers respond consistently during the interview) 2. Across years (check if growers respond consistently throughout the years) 3. Within cluster (compare a grower's responses with those of others in the group) o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the questionnaire was redesigned to be more precise and obtain data by individual fertilizer products. The new method of measuring fertilizer inputs leads to more accurate results, but also makes a year-on-year comparison difficult. After evaluating several solutions to this problems, 2014 fertilizer usage (NPK input) was re-estimated by calculating a weighted average of fertilizer usage in the following years.

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

BF Screened from India were selected based on the following criterion: (a) Corn growers in Davanagere, Belgaum, Warangal, Kurnool (all = districts) Location: Davanegere, Belgaum, Warangal, Kurnool
Average adapter of innovation
Mechanized tillage operation due labour shortage
Keeps animals for milk
Corn forage is used for animal feeding
Keep update on commercial market trend Secondary source of Agriculture income is dairy Relies on high fertilizer use. (Farmers who use >2 bags of urea and 1 bag of DAP per acre is considered as High fertilizer use growers) Low use of crop protection products (aim for growers who don't use CPP, if not possible, low use --> UPDATED: maximum of 2 sprays!) Traditional way of weed control (bullock drawn harrow followed by ridging)

(b) Cotton growers in WC & South
Location: Yavatmal , Akola, Aurangabad, Jalgaon, Warangal , Kurnool , Karimnagar (= all districts)
Commercial, normally traditional practices but a few always looks for new products. (Use hybrids and are interested in new products which deliver higher yields, with less disease and pests.)
Very particular about quality seed.
High expectation of profit from farming.
Good investment on inputs for getting maximum returns.
Some irrigation available but not sufficient, Manual operations.
Social and seeks knowledge from other fellow farmers and retailers. Western regions: I take all decisions in terms of cotton production by myself, without consulting fellow farmers, retailers, agronomists or sales representatives (based on answers of RF) Use generic / branded chemistry Dependent on retailers to fund his crop protection chemicals
Prefer Cotton hybrid which give good re flushing
Rotation with Bengalgram

(c) Rice growers in North & East Location: Karnal, Ludhiana, Sri Muktsar Sahib, Patiala, Allahabad,Gorakhpur, Barabanki (North & East)
Commercial ,Average adapter of innovation.
Medium input cost. (Spend 300 - 500 Rs on fertilizers, About 400-500 Rs on CP products can be considered as moderate or medium input cost.)
Mechanized tillage operations due to shortage of labour.
Good use of CP products. (Use products of leading MNCs; new chemistry/new products etc) Very particular about quality seeds.
Always look forward to new technologies that would reduce costs or increase profits.
High expectation of profits from farming.
Good investment on input for getting maximum returns.
Not aware about soil fertility issues.
Use generic chemicals
Dependent on commission agent for his recurring expenses or retailer to fund his inputs. = ALL BACKGROUND INFO
May or may not own a tractor.
High involvement of retailer/ commission agent on his decision of CP inputs Rice wheat rotation.

(d) Rice growers in East Location: Ranchi, Raipur (= west), Burdwan, Midnapore , Bhagalpur . (= East)
Late adapter of innovation . --> UPDATED: Western region (Raipur): BF is not late adapter of innovation (based on answer of RF) Usage of hybrid Rice or traditional varieties . (Either Open Pollinated Varieties or certified hybrids is fine. )
Moderate usage of CP products . (The spend on CP products is relatively lower i.e. less number of sprays or lower dose of recommended CP products. ) = ALL BACKGROUND INFO
Lack of resources ( irrigation, finance ) ,less educated ,traditional (= background info),low financial status .
Primarily dependent on farm for food and income. --> RF in Raipur (western region) says to not depend on his farm for income but BF will be recruited based on the original screening criteria above
not aware about soil fertility . --> UPDATED: in western region: BF are aware about soil fertility (based on answer of RF) --> UPDATED: Eastern region (Jharkhand & Bihar): BF are aware about soil fertility (based on answer of RF)
Depends on fertilizer for enhancing productivity.
Usage of generic chemistry. May or may not own tractor. High involvement of retailer on his decision of CP inputs . --> RF in Raipur (western region) says to take all decisions himself but BF will be recruited based on the original screening criteria above
Migrated farmers adopt technology . = ALL BACKGROUND INFO
Traditional cultivation practice. (This generally means OPV, little fertilizers and little chemicals.) = ALL BACKGROUND INFO
Conversion happening from OP to hybrid seeds in rainfed areas. = ALL BACKGROUND INFO

(e) Tomato growers location: Nasik, Pune, Ahmednagar, Belgaum, Vadodara, Jaipur.
Early adapter of innovation.
Mechanized tillage operations due to labour shortage.
Very particular about quality Seeds.
Always look forward to new CP technologies to increase profit
Good crop knowledge & Use advance chemistry ( Farmers who use newly launched, high performance CP products from leading MNCs can be considered as "Advance" or new chemistry products.). --> UPDATED: in Western regions: only have a little bit of knowledge about this and use only a little bit (based on answers of RF)
Use of SYT tomato seeds & CP products. (only for RF, BF can use SYT products but not necessarily) = ALL BACKGROUND INFO, is asked in screening but nobody is screened out (!)
Keep updates on commercial market trend .
Irrigated farms
Has milch animals. --> UPDATED: in Western regions, not all should have livestock (based on answer of RF)
Brand loyalty
Commercially very active.
Knows market prices in leading cities.
Has relationship with market forces.
Keeps in touch with other progressive farmers, good retailers and company professionals.

(f) Soybean growers location: Ratlam, Dhar, Hoshangabad, Washim Follow traditional cultivation practices . (Usually the use of farm-saved seeds and varieties, do not use adequate fertilizers, follow traditional interculture practices etc.)
Limited technical knowledge.
Many use farm saved seed.
Mechanized tillage and spraying operation.
Use of tractor for sowing and threshing operations.
Low investment on input in comparison with actual requirement.
Farmers are members of co-operative society in some areas. = ALL BACKGROUND INFO
Soyabean wheat rotation
Some involvement of retailer/commission agent on his decision of CP inputs.

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a.

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National Coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

BF Screened from Mexico were selected based on the following criterion:

(a) Smallholder maize growers Lagunillas (Guanajuato) and Atecucario (Michoacán) and Cuyoaco (Puebla) Weed control
Low to mid tech corn growers

(a) Smallholder tomato growers Tlayacapan (Morelos) Low Tech (Open Field, Sell on The Farm, use old CP portfolios, from Subsistence to small trading)
Tomato growers in Morelos, Tlayacapan

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab

Cleaning operations

Data processing:

Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

B. Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers:

o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) 
o Kynetec cross validates the answers of the growers in three different ways: 
  1. Within the grower (check if growers respond consistently during the interview) 
  2. Across years (check if growers respond consistently throughout the years) 
  3. Within cluster (compare a grower's responses with those of others in the group) 

o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the questionnaire was redesigned to be more precise and obtain data by individual fertilizer products. The new method of measuring fertilizer inputs leads to more accurate results, but also makes a year-on-year comparison difficult. After evaluating several solutions to this problems, 2014 fertilizer usage (NPK input) was re-estimated by calculating a weighted average of fertilizer usage in the following years.

Abstract

Syngenta is committed to increasing crop productivity and to using limited resources such as land, water and inputs more efficiently. Since 2014, Syngenta has been measuring trends in agricultural input efficiency on a global network of real farms. The Good Growth Plan dataset shows aggregated productivity and resource efficiency indicators by harvest year. The data has been collected from more than 4,000 farms and covers more than 20 different crops in 46 countries. The data (except USA data and for Barley in UK, Germany, Poland, Czech Republic, France and Spain) was collected, consolidated and reported by Kynetec (previously Market Probe), an independent market research agency. It can be used as benchmarks for crop yield and input efficiency.

Geographic coverage

National coverage

Analysis unit

Agricultural holdings

Kind of data

Sample survey data [ssd]

Sampling procedure

A. Sample design Farms are grouped in clusters, which represent a crop grown in an area with homogenous agro- ecological conditions and include comparable types of farms. The sample includes reference and benchmark farms. The reference farms were selected by Syngenta and the benchmark farms were randomly selected by Kynetec within the same cluster.

B. Sample size Sample sizes for each cluster are determined with the aim to measure statistically significant increases in crop efficiency over time. This is done by Kynetec based on target productivity increases and assumptions regarding the variability of farm metrics in each cluster. The smaller the expected increase, the larger the sample size needed to measure significant differences over time. Variability within clusters is assumed based on public research and expert opinion. In addition, growers are also grouped in clusters as a means of keeping variances under control, as well as distinguishing between growers in terms of crop size, region and technological level. A minimum sample size of 20 interviews per cluster is needed. The minimum number of reference farms is 5 of 20. The optimal number of reference farms is 10 of 20 (balanced sample).

C. Selection procedure The respondents were picked randomly using a “quota based random sampling” procedure. Growers were first randomly selected and then checked if they complied with the quotas for crops, region, farm size etc. To avoid clustering high number of interviews at one sampling point, interviewers were instructed to do a maximum of 5 interviews in one village.

Screened Bangladesh BF were from Jessore, Rajshahi, Rangpur, Bogra, Comilla and Mymensingh and were selected based on the following criterion: - Rice growers
- Partly smallholder
- Professional farmer with rice being main income source
- Manual planting and harvesting. But land preparation and threshing are mechanized.
- Receive tech supports from SYT FFs, CP suppliers or dealers
- Hire labor
- Leading local farmer
- Using SYT products (read remark in next column)
- Loyal to SYT (only for RF - read remark in next column)
- Rice to rice rotation

Mode of data collection

Face-to-face [f2f]

Research instrument

Data collection tool for 2019 covered the following information:

(A) PRE- HARVEST INFORMATION

PART I: Screening PART II: Contact Information PART III: Farm Characteristics a. Biodiversity conservation b. Soil conservation c. Soil erosion d. Description of growing area e. Training on crop cultivation and safety measures PART IV: Farming Practices - Before Harvest a. Planting and fruit development - Field crops b. Planting and fruit development - Tree crops c. Planting and fruit development - Sugarcane d. Planting and fruit development - Cauliflower e. Seed treatment

(B) HARVEST INFORMATION

PART V: Farming Practices - After Harvest a. Fertilizer usage b. Crop protection products c. Harvest timing & quality per crop - Field crops d. Harvest timing & quality per crop - Tree crops e. Harvest timing & quality per crop - Sugarcane f. Harvest timing & quality per crop - Banana g. After harvest PART VI - Other inputs - After Harvest a. Input costs b. Abiotic stress c. Irrigation

See all questionnaires in external materials tab

Cleaning operations

Data processing:

Kynetec uses SPSS (Statistical Package for the Social Sciences) for data entry, cleaning, analysis, and reporting. After collection, the farm data is entered into a local database, reviewed, and quality-checked by the local Kynetec agency. In the case of missing values or inconsistencies, farmers are re-contacted. In some cases, grower data is verified with local experts (e.g. retailers) to ensure data accuracy and validity. After country-level cleaning, the farm-level data is submitted to the global Kynetec headquarters for processing. In the case of missing values or inconsistences, the local Kynetec office was re-contacted to clarify and solve issues.

Quality assurance Various consistency checks and internal controls are implemented throughout the entire data collection and reporting process in order to ensure unbiased, high quality data.

• Screening: Each grower is screened and selected by Kynetec based on cluster-specific criteria to ensure a comparable group of growers within each cluster. This helps keeping variability low.

• Evaluation of the questionnaire: The questionnaire aligns with the global objective of the project and is adapted to the local context (e.g. interviewers and growers should understand what is asked). Each year the questionnaire is evaluated based on several criteria, and updated where needed.

• Briefing of interviewers: Each year, local interviewers - familiar with the local context of farming -are thoroughly briefed to fully comprehend the questionnaire to obtain unbiased, accurate answers from respondents.

• Cross-validation of the answers: o Kynetec captures all growers' responses through a digital data-entry tool. Various logical and consistency checks are automated in this tool (e.g. total crop size in hectares cannot be larger than farm size) o Kynetec cross validates the answers of the growers in three different ways: 1. Within the grower (check if growers respond consistently during the interview) 2. Across years (check if growers respond consistently throughout the years) 3. Within cluster (compare a grower's responses with those of others in the group) o All the above mentioned inconsistencies are followed up by contacting the growers and asking them to verify their answers. The data is updated after verification. All updates are tracked.

• Check and discuss evolutions and patterns: Global evolutions are calculated, discussed and reviewed on a monthly basis jointly by Kynetec and Syngenta.

• Sensitivity analysis: sensitivity analysis is conducted to evaluate the global results in terms of outliers, retention rates and overall statistical robustness. The results of the sensitivity analysis are discussed jointly by Kynetec and Syngenta.

• It is recommended that users interested in using the administrative level 1 variable in the location dataset use this variable with care and crosscheck it with the postal code variable.

Data appraisal

Due to the above mentioned checks, irregularities in fertilizer usage data were discovered which had to be corrected:

For data collection wave 2014, respondents were asked to give a total estimate of the fertilizer NPK-rates that were applied in the fields. From 2015 onwards, the questionnaire was redesigned to be more precise and obtain data by individual fertilizer products. The new method of measuring fertilizer inputs leads to more accurate results, but also makes a year-on-year comparison difficult. After evaluating several solutions to this problems, 2014 fertilizer usage (NPK input) was re-estimated by calculating a weighted average of fertilizer usage in the following years.