Washington County, MN Tax Parcels. An independent manual check of the parcel data was made at the time of its initial development whereby all geo-coded parcel legal descriptions in a PLSS section were reinterpreted and examined for accuracy and completeness on the hard copy check plot. As each new plat or lot division occurs, a similar process is repeated for the new additions during the maintenance period. Multiple lines of ownership indicating ambiguity in property line location are merged into a single line if falling within 3 feet of each other. Gaps or overlaps in these situations are not shown. In some cases where two lines converge; e.g., where at one end the two lot lines are within 0.50 feet of each other and at the other end they are within 6.00 feet of each other they may be merged because the average discrepancy is 3 feet or less. Where gaps or overlaps exist in excess of approximately 3 feet in width, they are shown with text notation indicating APPARENT GAP or AREA OF DISCREPANCY.

This layer contains data concerning the location and characteristics of bedrock, mappable geologic units, within Washington county. This geodatabase contains geologic data from Washington County, Maryland. Data from several geologic quadrangles and two regional scale geologic maps were incorporated into the regional scale geologic feature classes in this geodatabase. Because of the scale of this map, some features were generalized slightly from the quad scale data. Additionally, some corrections were made for accuracy, such as edge matching to resolve "border faults". The source data for this map and geodatabase come from maps published by the Maryland Geological Survey from 2001 to the present, as well as one map published in cooperation with the United States Geological Survey. The source maps are Buckeystown (2001), Catoctin Furnace (2004), Frederick (2004), New Windsor (2004), Point of Rocks (2004), Walkersville (2004), Woodsboro (2004), Middletown (2005), Union Bridge (2006), Funkstown (2009), Keedysville, Shepherdstown, Charlestown, and Harpers Ferry (2009), Myersville and Smithsburg (2009), Hagerstown (2013), Mason and Dixon (2013), Clear Spring and Hedgesville (2014), Williamsport (2014), Blue Ridge Summit (2021, in review), Emmitsburg and Taneytown (2021, in review), all 1:24000 quadrangle scale, as well as portions of two regional maps: Geologic Map of Garrett, Allegany, and Western Washington Counties, Maryland (2013), and Geologic Map of the Frederick 30' x 60' Quadrangle, Maryland, Virginia, and West Virginia (USGS, 2007). The GIS data from the referenced maps were mosaiced in Arc Map, corrected for accuracy across quad boundaries, merged to form a continuous dataset and clipped to the extent of Washington County. Feature level metadata are included, which contain field descriptions for each feature class. This is a small scale dataset, appropriate for 1:100,000 regional scale. Quad scale data are suggested for display or analysis that requires a larger scale. This dataset is prepared for compliance with the USGS GeMS database standard. Last Updated: 06/01/2022

This layer contains data concerning the location and characteristics of unconsolidated Quaternary deposits within Washington county. This geodatabase contains geologic data from Washington County, Maryland. Data from several geologic quadrangles and two regional scale geologic maps were incorporated into the regional scale geologic feature classes in this geodatabase. Because of the scale of this map, some features were generalized slightly from the quad scale data. Additionally, some corrections were made for accuracy, such as edge matching to resolve "border faults". The source data for this map and geodatabase come from maps published by the Maryland Geological Survey from 2001 to the present, as well as one map published in cooperation with the United States Geological Survey. The source maps are Buckeystown (2001), Catoctin Furnace (2004), Frederick (2004), New Windsor (2004), Point of Rocks (2004), Walkersville (2004), Woodsboro (2004), Middletown (2005), Union Bridge (2006), Funkstown (2009), Keedysville, Shepherdstown, Charlestown, and Harpers Ferry (2009), Myersville and Smithsburg (2009), Hagerstown (2013), Mason and Dixon (2013), Clear Spring and Hedgesville (2014), Williamsport (2014), Blue Ridge Summit (2021, in review), Emmitsburg and Taneytown (2021, in review), all 1:24000 quadrangle scale, as well as portions of two regional maps: Geologic Map of Garrett, Allegany, and Western Washington Counties, Maryland (2013), and Geologic Map of the Frederick 30' x 60' Quadrangle, Maryland, Virginia, and West Virginia (USGS, 2007). The GIS data from the referenced maps were mosaiced in Arc Map, corrected for accuracy across quad boundaries, merged to form a continuous dataset and clipped to the extent of Washington County. Feature level metadata are included, which contain field descriptions for each feature class. This is a small scale dataset, appropriate for 1:100,000 regional scale. Quad scale data are suggested for display or analysis that requires a larger scale. This dataset is prepared for compliance with the USGS GeMS database standard. Last Updated: 06/01/2022

Map of Washington County, Maryland, showing distribution of geological formations and structural features.

The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The projection is NAD_1983_UTM_Zone_12N with the coordinate system name as Universal Transverse Mercator. The horizontal accuracy meets Guidelines and specifications for DFIRM production.

An official index map of tax maps by municipality for the County of Berks Assessment Department.

This layer contains data concerning the location and characteristics of contacts and faults within Washington county. This geodatabase contains geologic data from Washington County, Maryland. Data from several geologic quadrangles and two regional scale geologic maps were incorporated into the regional scale geologic feature classes in this geodatabase. Because of the scale of this map, some features were generalized slightly from the quad scale data. Additionally, some corrections were made for accuracy, such as edge matching to resolve "border faults". The source data for this map and geodatabase come from maps published by the Maryland Geological Survey from 2001 to the present, as well as one map published in cooperation with the United States Geological Survey. The source maps are Buckeystown (2001), Catoctin Furnace (2004), Frederick (2004), New Windsor (2004), Point of Rocks (2004), Walkersville (2004), Woodsboro (2004), Middletown (2005), Union Bridge (2006), Funkstown (2009), Keedysville, Shepherdstown, Charlestown, and Harpers Ferry (2009), Myersville and Smithsburg (2009), Hagerstown (2013), Mason and Dixon (2013), Clear Spring and Hedgesville (2014), Williamsport (2014), Blue Ridge Summit (2021, in review), Emmitsburg and Taneytown (2021, in review), all 1:24000 quadrangle scale, as well as portions of two regional maps: Geologic Map of Garrett, Allegany, and Western Washington Counties, Maryland (2013), and Geologic Map of the Frederick 30' x 60' Quadrangle, Maryland, Virginia, and West Virginia (USGS, 2007). The GIS data from the referenced maps were mosaiced in Arc Map, corrected for accuracy across quad boundaries, merged to form a continuous dataset and clipped to the extent of Washington County. Feature level metadata are included, which contain field descriptions for each feature class. This is a small scale dataset, appropriate for 1:100,000 regional scale. Quad scale data are suggested for display or analysis that requires a larger scale. This dataset is prepared for compliance with the USGS GeMS database standard. Last Updated: 06/01/2022

This layer contains data concerning field measurements of inclined bedding, structure features like fracture, cleavage, and other field measurements within Washington county. This geodatabase contains geologic data from Washington County, Maryland. Data from several geologic quadrangles and two regional scale geologic maps were incorporated into the regional scale geologic feature classes in this geodatabase. Because of the scale of this map, some features were generalized slightly from the quad scale data. Additionally, some corrections were made for accuracy, such as edge matching to resolve "border faults". The source data for this map and geodatabase come from maps published by the Maryland Geological Survey from 2001 to the present, as well as one map published in cooperation with the United States Geological Survey. The source maps are Buckeystown (2001), Catoctin Furnace (2004), Frederick (2004), New Windsor (2004), Point of Rocks (2004), Walkersville (2004), Woodsboro (2004), Middletown (2005), Union Bridge (2006), Funkstown (2009), Keedysville, Shepherdstown, Charlestown, and Harpers Ferry (2009), Myersville and Smithsburg (2009), Hagerstown (2013), Mason and Dixon (2013), Clear Spring and Hedgesville (2014), Williamsport (2014), Blue Ridge Summit (2021, in review), Emmitsburg and Taneytown (2021, in review), all 1:24000 quadrangle scale, as well as portions of two regional maps: Geologic Map of Garrett, Allegany, and Western Washington Counties, Maryland (2013), and Geologic Map of the Frederick 30' x 60' Quadrangle, Maryland, Virginia, and West Virginia (USGS, 2007). The GIS data from the referenced maps were mosaiced in Arc Map, corrected for accuracy across quad boundaries, merged to form a continuous dataset and clipped to the extent of Washington County. Feature level metadata are included, which contain field descriptions for each feature class. This is a small scale dataset, appropriate for 1:100,000 regional scale. Quad scale data are suggested for display or analysis that requires a larger scale. This dataset is prepared for compliance with the USGS GeMS database standard. Last Updated: 06/01/2022

Washington County Maryland Interactive Parks Map

The Florida Department of Revenue’s Property Tax Oversight(PTO) program collects parcel level Geographic Information System (GIS) data files every April from all of Florida’s 67 county property appraisers’ offices. This GIS data was exported from these file submissions in August 2025. The GIS parcel polygon features have been joined with thereal property roll (Name – Address – Legal, or NAL)file. No line work was adjusted between county boundaries.The polygon data set represents the information property appraisers gathered from the legal description on deeds, lot layout of recorded plats, declaration of condominium documents, recorded and unrecorded surveys.Individual parcel data is updated continually by each county property appraiser as needed. The GIS linework and related attributions for the statewide parcel map are updated annually by the Department every August. The dataset extends countywide and is attribute by Federal Information Processing Standards (FIPS) code.DOR reference with FIPS county codes and attribution definitions - https://fgio.maps.arcgis.com/home/item.html?id=55e830fd6c8948baae1601fbfc33a3b2If you discover the inadvertent release of a confidential record exempt from disclosure pursuant to Chapter 119, Florida Statutes, public records laws, immediately notify the Department of Revenue at 850-717-6570 and your local Florida Property Appraisers’ Office. Please contact the county property appraiser with any parcel specific questions: Florida Property Appraisers’ Offices:Alachua County Property Appraiser – https://www.acpafl.org/Baker County Property Appraiser – https://www.bakerpa.com/Bay County Property Appraiser – https://baypa.net/Bradford County Property Appraiser – https://www.bradfordappraiser.com/Brevard County Property Appraiser – https://www.bcpao.us/Broward County Property Appraiser – https://bcpa.net/Calhoun County Property Appraiser – https://calhounpa.net/Charlotte County Property Appraiser – https://www.ccappraiser.com/Citrus County Property Appraiser – https://www.citruspa.org/Clay County Property Appraiser – https://ccpao.com/Collier County Property Appraiser – https://www.collierappraiser.com/Columbia County Property Appraiser – https://columbia.floridapa.com/DeSoto County Property Appraiser – https://www.desotopa.com/Dixie County Property Appraiser – https://www.qpublic.net/fl/dixie/Duval County Property Appraiser – https://www.coj.net/departments/property-appraiser.aspxEscambia County Property Appraiser – https://www.escpa.org/Flagler County Property Appraiser – https://flaglerpa.com/Franklin County Property Appraiser – https://franklincountypa.net/Gadsden County Property Appraiser – https://gadsdenpa.com/Gilchrist County Property Appraiser – https://www.qpublic.net/fl/gilchrist/Glades County Property Appraiser – https://qpublic.net/fl/glades/Gulf County Property Appraiser – https://gulfpa.com/Hamilton County Property Appraiser – https://hamiltonpa.com/Hardee County Property Appraiser – https://hardeepa.com/Hendry County Property Appraiser – https://hendryprop.com/Hernando County Property Appraiser – https://hernandocountypa-florida.us/Highlands County Property Appraiser – https://www.hcpao.org/Hillsborough County Property Appraiser – https://www.hcpafl.org/Holmes County Property Appraiser – https://www.qpublic.net/fl/holmes/Indian River County Property Appraiser – https://www.ircpa.org/Jackson County Property Appraiser – https://www.qpublic.net/fl/jackson/Jefferson County Property Appraiser – https://jeffersonpa.net/Lafayette County Property Appraiser – https://www.lafayettepa.com/Lake County Property Appraiser – https://www.lakecopropappr.com/Lee County Property Appraiser – https://www.leepa.org/Leon County Property Appraiser – https://www.leonpa.gov/Levy County Property Appraiser – https://www.qpublic.net/fl/levy/Liberty County Property Appraiser – https://libertypa.org/Madison County Property Appraiser – https://madisonpa.com/Manatee County Property Appraiser – https://www.manateepao.gov/Marion County Property Appraiser – https://www.pa.marion.fl.us/Martin County Property Appraiser – https://www.pa.martin.fl.us/Miami-Dade County Property Appraiser – https://www.miamidade.gov/pa/Monroe County Property Appraiser – https://mcpafl.org/Nassau County Property Appraiser – https://ncpafl.com/Okaloosa County Property Appraiser – https://okaloosapa.com/Okeechobee County Property Appraiser – https://www.okeechobeepa.com/Orange County Property Appraiser – https://ocpaweb.ocpafl.org/Osceola County Property Appraiser – https://www.property-appraiser.org/Palm Beach County Property Appraiser – https://www.pbcgov.org/papa/index.htmPasco County Property Appraiser – https://pascopa.com/Pinellas County Property Appraiser – https://www.pcpao.org/Polk County Property Appraiser – https://www.polkpa.org/Putnam County Property Appraiser – https://pa.putnam-fl.com/Santa Rosa County Property Appraiser – https://srcpa.gov/Sarasota County Property Appraiser – https://www.sc-pa.com/Seminole County Property Appraiser – https://www.scpafl.org/St. Johns County Property Appraiser – https://www.sjcpa.gov/St. Lucie County Property Appraiser – https://www.paslc.gov/Sumter County Property Appraiser – https://www.sumterpa.com/Suwannee County Property Appraiser – https://suwannee.floridapa.com/Taylor County Property Appraiser – https://qpublic.net/fl/taylor/Union County Property Appraiser – https://union.floridapa.com/Volusia County Property Appraiser – https://vcpa.vcgov.org/Wakulla County Property Appraiser – https://mywakullapa.com/Walton County Property Appraiser – https://waltonpa.com/Washington County Property Appraiser – https://www.qpublic.net/fl/washington/Florida Department of Revenue Property Tax Oversight https://floridarevenue.com/property/Pages/Home.aspx

Use this web map to link to other geospatial datasets available through county and city sites (Not comprehensive). May need to zoom in to see the participating cities. The county boundaries and city points were published by Washington State agencies and downloaded from geo.wa.gov. Locations are approximate, and no warranties are made regarding this data. The canvas basemap has been compiled by Esri and the ArcGIS user community from a variety of best available sources. Want to have your data site listed? Contact the Geospatial Program Office.

The purpose of this web application is to keep the public informed on current sale values for property within Washington County, Arkansas. All data used to generate this web application is public except for the basemap which would need expressed permission from the Assessor's Office to use. There is a report function within this appliction that can be used to generate a csv file of the sales that are selected.

This dataset is a compilation of county parcel data from Minnesota counties that have opted-in for their parcel data to be included in this dataset.

It includes the following 59 counties that have opted-in as of the publication date of this dataset: Aitkin County, Anoka County, Becker County, Benton County, Big Stone County, Carlton County, Carver County, Cass County, Chippewa County, Chisago County, Clay County, Clearwater County, Cook County, Crow Wing County, Dakota County, Douglas County, Fillmore County, Grant County, Hennepin County, Houston County, Isanti County, Itasca County, Jackson County, Koochiching County, Lac qui Parle County, Lake County, Lake of the Woods County, Lyon County, Marshall County, McLeod County, Mille Lacs County, Morrison County, Mower County, Murray County, Norman County, Olmsted County, Otter Tail County, Pennington County, Pipestone County, Polk County, Pope County, Ramsey County, Red Lake County, Renville County, Rice County, Scott County, Sherburne County, St. Louis County, Stearns County, Steele County, Stevens County, Traverse County, Wabasha County, Waseca County, Washington County, Wilkin County, Winona County, Wright County, and Yellow Medicine County.

If you represent a county not included in this dataset and would like to opt-in, please contact Heather Albrecht (Heather.Albrecht@hennepin.us), co-chair of the Minnesota Geospatial Advisory Council (GAC)’s Parcels and Land Records Committee's Open Data Subcommittee. County parcel data does not need to be in the GAC parcel data standard to be included. MnGeo will map the county fields to the GAC standard.

County parcel data records have been assembled into a single dataset with a common coordinate system (UTM Zone 15) and common attribute schema. The county parcel data attributes have been mapped to the GAC parcel data standard for Minnesota: https://www.mngeo.state.mn.us/committee/standards/parcel_attrib/parcel_attrib.html

This compiled parcel dataset was created using Python code developed by Minnesota state agency GIS professionals, and represents a best effort to map individual county source file attributes into the common attribute schema of the GAC parcel data standard. The attributes from counties are mapped to the most appropriate destination column. In some cases, the county source files included attributes that were not mapped to the GAC standard. Additionally, some county attribute fields were parsed and mapped to multiple GAC standard fields, such as a single line address. Each quarter, MnGeo provides a text file to counties that shows how county fields are mapped to the GAC standard. Additionally, this text file shows the fields that are not mapped to the standard and those that are parsed. If a county shares changes to how their data should be mapped, MnGeo updates the compilation. If you represent a county and would like to update how MnGeo is mapping your county attribute fields to this compiled dataset, please contact us.

This dataset is a snapshot of parcel data, and the source date of the county data may vary. Users should consult County websites to see the most up-to-date and complete parcel data.

There have been recent changes in date/time fields, and their processing, introduced by our software vendor. In some cases, this has resulted in date fields being empty. We are aware of the issue and are working to correct it for future parcel data releases.

The State of Minnesota makes no representation or warranties, express or implied, with respect to the use or reuse of data provided herewith, regardless of its format or the means of its transmission. THE DATA IS PROVIDED “AS IS” WITH NO GUARANTEE OR REPRESENTATION ABOUT THE ACCURACY, CURRENCY, SUITABILITY, PERFORMANCE, MECHANTABILITY, RELIABILITY OR FITINESS OF THIS DATA FOR ANY PARTICULAR PURPOSE. This dataset is NOT suitable for accurate boundary determination. Contact a licensed land surveyor if you have questions about boundary determinations.

DOWNLOAD NOTES: This dataset is only provided in Esri File Geodatabase and OGC GeoPackage formats. A shapefile is not available because the size of the dataset exceeds the limit for that format. The distribution version of the fgdb is compressed to help reduce the data footprint. QGIS users should consider using the Geopackage format for better results.

Scoggins Dam in northwest Oregon lies within the Gales Creek fault zone (GCF), a northwest-striking system of active faults forming the boundary between the Coast Range and the Tualatin Valley about 25 km east of Portland, Oregon. Geologic mapping published in 2020 shows the dam to lie within a block-faulted releasing stepover between the right-lateral, NW-striking Scoggins Creek and Parsons Creek strands of the GCF. The Scoggins Creek strand is presently mapped beneath the existing dam about 200 m north of the south abutment. Preliminary results from paleoseismic trenching by the U.S. Bureau of Reclamation, Portland State University, and the U.S. Geological Survey indicate that these two major fault strands have had multiple surface rupturing earthquakes in the Holocene. To confirm the accuracy of the 2020 geologic map and the geometry of the GCF in the releasing stepover region, we completed additional geologic mapping of the dam, reservoir, and an alternative dam site downstream between July 2018 and May 2020. Using high-resolution lidar topographic data and satellite imagery on handheld digital tablets, we collected data at ~500 field sites in the heavily forested terrain. We used these detailed field observations to locate and digitally map the main Scoggins Creek and Parsons Creek fault strands, as well as the cross faults linking the two main strands, to produce an improved and more detailed geologic map and cross sections of Scoggins Valley and its existing and proposed dam sites.

County assessor's online applications for searching and rviewing data about parcels and proprties.

The Bureau of Reclamation's Scoggins Dam lies within the Gales Creek fault zone southwest of Hillsboro, Oregon. Recent geologic mapping shows the dam to overlie a potentially active strand of the fault. This report describes the geology of the dam in detail and confirms that the dam overlies a strand of the Gales Creek fault. The report documents small faults in the reservoir and off the north end of the dam along the Parsons Creek strand of the fault. The report further documents the geology of an alternative dam site downstream of the existing dam.

This map identifies approved and in process land development projects within Washington County, MD. It also includes information on service requests, grading plans, traffic impact studies, forestry records, zoning, zoning overlays, and plats. This is NOT an inclusive map.

To launch this map, visit http://maps.co.washington.mn.us/CountyFacilities/ .This map is designed to help identify the location of various Washington County facilities. Descriptions with details of the facility (location, contact information, photographs, maps, handicap accessibility, rental availability, etc.) display within each county facility’s listing.

Map of Washington County, Maryland, showing distribution of geological formations.

Washington state county boundaries.