HOME Income Limits are calculated using the same methodology that HUD uses for calculating the income limits for the Section 8 program. These limits are based on HUD estimates of median family income, with adjustments based on family size. The Department's methodology for calculating nationwide median family income figures is described in Notice PDR-2001-01. For more information about how HUD calculates the HOME Program income limits, visit huduser.gov, the website for HUD's Office of Policy Development and Research, for more general information.

Income limits used to determine the income eligibility of applicants for assistance under three programs authorized by the National Housing Act. These programs are the Section 221(d)(3) Below Market Interest Rate (BMIR) rental program, the Section 235 program, and the Section 236 program. These income limits are listed by dollar amount and family size, and they are effective on the date issued. Due to the Housing and Economic Recovery Act of 2008 (Public Law 110-289), Income Limits used to determine qualification levels as well as set maximum rental rates for projects funded with tax credits authorized under section 42 of the Internal Revenue Code (the Code) and projects financed with tax exempt housing bonds issued to provide qualified residential rental development under section 142 of the Code (hereafter referred to as Multifamily Tax Subsidy Projects (MTSPs)) are now calculated and presented separately from the Section 8 income limits.

California State Income Limits reflect updated median income and household income levels for acutely low-, extremely low-, very low-, low- and moderate-income households for California’s 58 counties (required by Health and Safety Code Section 50093). These income limits apply to State and local affordable housing programs statutorily linked to HUD income limits and differ from income limits applicable to other specific federal, State, or local programs.

Text source: https://www.huduser.gov/portal/datasets/HOME-Income-limits.htmlLanding page description:HOME Income Limits data are available from FY 1998 to the present. The HOME Income Limits are calculated using the same methodology that HUD uses for calculating the income limits for the Section 8 program, in accordance with Section 3(b)(2) of the U.S. Housing Act of 1937, as amended. These limits are based on HUD estimates of median family income, with adjustments based on family size. Please note that the 30 percent income limits for the HOME program have been calculated based on the definition of Extremely Low–Income Family (ELI) as described in Consolidated Submission for CPD Programs section of 24 CFR part 91.5. Therefore, the ELI Limit is calculated as 30 percent of median family income for the area and may not be the same as the Section 8 ELI Limit for your jurisdiction. The Section 8 Limit is calculated based on the definition of ELI as described in The 2014 Consolidated Appropriations Act, (Section 238 on page 128 Stat 635) which defines ELI as very low–income families whose incomes do not exceed the higher of the Federal poverty level or 30% of area median income. Family sizes in excess of 8 persons are calculated by adding 8% of the four-person income limit for each additional family member. That is, a 9-person limit should be 140% of the 4-person limit, the 10-person limit should be 148%.The HOME income limit values for large households (9-12 persons) must be rounded to the nearest $50. Therefore, all values from 1 to 24 are rounded down to 0, and all values from 25 to 49 are rounded up to 50.Note: The FY 2024 HOME Income Limits effective date is June 01, 2024.

HUD’s Office of Policy Development and Research (PD&R) is pleased to announce that Fair Market Rents and Income Limits data are now available via an application programming interface (API). With this API, developers can easily access and customize Fair Market Rents and Income Limits data for use in existing applications or to create new applications. To create an account and get an access token, please visit the API page here: https://www.huduser.gov/portal/dataset/fmr-api.html. The Department of Housing and Urban Development (HUD) sets income limits that determine eligibility for assisted housing programs including the Public Housing, Section 8 project-based, Section 8 Housing Choice Voucher, Section 202 housing for the elderly, and Section 811 housing for persons with disabilities programs. HUD develops income limits based on Median Family Income estimates and Fair Market Rent area definitions for each metropolitan area, parts of some metropolitan areas, and each non-metropolitan county.

This dataset and map service provides information on the U.S. Housing and Urban Development's (HUD) low to moderate income areas. The term Low to Moderate Income, often referred to as low-mod, has a specific programmatic context within the Community Development Block Grant (CDBG) program. Over a 1, 2, or 3-year period, as selected by the grantee, not less than 70 percent of CDBG funds must be used for activities that benefit low- and moderate-income persons. HUD uses special tabulations of Census data to determine areas where at least 51% of households have incomes at or below 80% of the area median income (AMI). This dataset and map service contains the following layer.

This dataset provides information about the median family income in Austin (SD23 measure EOA.B.6). Median family income (MFI) is calculated annually by the U.S. Department of Housing and Urban Development (HUD) to help set income limits that determine eligibility for assisted housing programs. This dataset includes the MFI calculated by HUD for the Austin-Round Rock MSA and the United States. For years prior to FY 2016, HUD reported on the Austin-Round Rock-San Marcos MSA instead of the Austin-Round Rock MSA.

This information is important in understanding economic and affordability trends in Austin. Additionally, the Housing and Planning Department uses median family income data in setting income limits for affordable housing programs in Austin.

View more details and insights related to this dataset on the story page: https://data.austintexas.gov/stories/s/Median-Family-Income/r93e-edn2

For source data: https://data.census.gov/table/ACSST5Y2023.S1903For HUD income limits: https://www.huduser.gov/portal/datasets/il.htmlFor more information about this dataset, please contact egis@isd.lacounty.gov

In accordance with 24 CFR Part 92.252, HUD provides maximum HOME rent limits. The maximum HOME rents are the lesser of: The fair market rent for existing housing for comparable units in the area as established by HUD under 24 CFR 888.111 or A rent that does not exceed 30 percent of the adjusted income of a family whose annual income equals 65 percent of the median income for the area, as determined by HUD, with adjustments for number of bedrooms in the unit. The HOME rent limits provided by HUD will include average occupancy per unit and adjusted income assumptions.

Thumbnail image by Tony Moody.This dataset includes all housing developments approved by the City of Boise’s (“city”) Planning Division since 2020 that are known by the city to have received or are expected to receive support or incentives from a government entity. Each row represents one development. Data may be unavailable for some projects and details are subject to change until construction is complete. Addresses are excluded for projects with fewer than five homes for privacy reasons.

The dataset includes details on the number of “homes” in a development. We use the word "home" to refer to any single unit of housing regardless of size, type, or whether it is rented or owned. For example, a building with 40 apartments counts as 40 homes, and a single detached house counts as one home.

The dataset includes details about the phase of each project. The process for build a new development is as follows: First, one must receive approval from the city’s Planning Division, which is also known as being “entitled.” Next, one must apply for and receive a permit from the city’s Building Division before beginning construction. Finally, once construction is complete and all city inspections have been passed, the building can be occupied.

The dataset also includes data on the affordability level of each development. To receive a government incentive, a developer is typically required to rent or sell a specified number of homes to households that have an income below limits set by the government and their housing cost must not exceed 30% of their income. The federal government determines income limits based on a standard called “area median income.” The city considers housing affordable if is targeted to households earning at or below 80% of the area median income. For a three-person household in Boise, that equates to an annual income of $60,650 and monthly rent or mortgage of $1,516. See Boise Income Guidelines for more details.Project Address(es) – Includes all addresses that are included as part of the development project.Address – The primary address for the development.Parcel Number(s) – The identification code for all parcels of land included in the development.Acreage – The number of acres for the parcel(s) included in the project.Planning Permit Number – The identification code for all permits the development has received from the Planning Division for the City of Boise. The number and types of permits required vary based on the location and type of development.Date Entitled – The date a development was approved by the City’s Planning Division.Building Permit Number – The identification code for all permits the development has received from the city’s Building Division.Date Building Permit Issued – Building permits are required to begin construction on a development.Date Final Certificate of Occupancy Issued – A certificate of occupancy is the final approval by the city for a development, once construction is complete. Not all developments require a certificate of occupancy.Studio – The number of homes in the development that are classified as a studio. A studio is typically defined as a home in which there is no separate bedroom. A single room serves as both a bedroom and a living room.1-Bedroom – The number of homes in a development that have exactly one bedroom.2-Bedroom – The number of homes in a development that have exactly two bedrooms.3-Bedroom – The number of homes in a development that have exactly three bedrooms.4+ Bedroom – The number of homes in a development that have four or more bedrooms.# of Total Project Units – The total number of homes in the development.# of units toward goals – The number of homes in a development that contribute to either the city’s goal to produce housing affordable at or under 60% of area median income, or the city’s goal to create permanent supportive housing for households experiencing homelessness.Rent at or under 60% AMI - The number of homes in a development that are required to be rented at or below 60% of area median income. See the description of the dataset above for an explanation of area median income or see Boise Income Guidelines for more details. Boise defines a home as “affordable” if it is rented or sold at or below 80% of area median income.Rent 61-80% AMI – The number of homes in a development that are required to be rented at between 61% and 80% of area median income. See the description of the dataset above for an explanation of area median income or see Boise Income Guidelines for more details. Boise defines a home as “affordable” if it is rented or sold at or below 80% of area median income.Rent 81-120% AMI - The number of homes in a development that are required to be rented at between 81% and 120% of area median income. See the description of the dataset above for an explanation of area median income or see Boise Income Guidelines for more details.Own at or under 60% AMI - The number of homes in a development that are required to be sold at or below 60% of area median income. See the description of the dataset above for an explanation of area median income or see Boise Income Guidelines for more details. Boise defines a home as “affordable” if it is rented or sold at or below 80% of area median income.Own 61-80% AMI – The number of homes in a development that are required to be sold at between 61% and 80% of area median income. See the description of the dataset above for an explanation of area median income or see Boise Income Guidelines for more details. Boise defines a home as “affordable” if it is rented or sold at or below 80% of area median income.Own 81-120% AMI - The number of homes in a development that are required to be sold at between 81% and 120% of area median income. See the description of the dataset above for an explanation of area median income or see Boise Income Guidelines for more details.Housing Land Trust – “Yes” if a development receives or is expected to receive this incentive. The Housing Land Trust is a model in which the city owns land that it leases to a developer to build affordable housing.City Investment – “Yes” if the city invests funding or contributes land to an affordable development.Zoning Incentive - The city's zoning code provides incentives for developers to create affordable housing. Incentives may include the ability to build an extra floor or be subject to reduced parking requirements. “Yes” if a development receives or is expected to receive one of these incentives.Project Management - The city provides a developer and their design team a single point of contact who works across city departments to simplify the permitting process, and assists the applicants in understanding the city’s requirements to avoid possible delays. “Yes” if a development receives or is expected to receive this incentive.Low-Income Housing Tax Credit (LIHTC) - A federal tax credit available to some new affordable housing developments. The Idaho Housing and Finance Association is a quasi-governmental agency that administers these federal tax credits. “Yes” if a development receives or is expected to receive this incentive.CCDC Investment - The Capital City Development Corp (CCDC) is a public agency that financially supports some affordable housing development in Urban Renewal Districts. “Yes” if a development receives or is expected to receive this incentive. If “Yes” the field identifies the Urban Renewal District associated with the development.City Goal – The city has set goals to produce housing affordable to households at or below 60% of area median income, and to create permanent supportive housing for households experiencing homelessness. This field identifies whether a development contributes to one of those goals.Project Phase - The process for build a new development is as follows: First, one must receive approval from the city’s Planning Division, which is also known as being “entitled.” Next, one must apply for and receive a permit from the city’s Building Division before beginning construction. Finally, once construction is complete and all city inspections have been passed, the building can be occupied.

This dataset provides information about the median family income in Austin (SD23 measure EOA.B.6). Median family income (MFI) is calculated annually by the U.S. Department of Housing and Urban Development (HUD) to help set income limits that determine eligibility for assisted housing programs. This dataset includes the MFI calculated by HUD for the Austin-Round Rock MSA and the United States. For years prior to FY 2016, HUD reported on the Austin-Round Rock-San Marcos MSA instead of the Austin-Round Rock MSA. This information is important in understanding economic and affordability trends in Austin. Additionally, the Housing and Planning Department uses median family income data in setting income limits for affordable housing programs in Austin. View more details and insights related to this dataset on the story page: https://data.austintexas.gov/stories/s/Median-Family-Income/r93e-edn2

California State Income Limits reflect updated median income and household income levels for acutely low-, extremely low-, very low-, low- and moderate-income households for California’s 58 counties (required by Health and Safety Code Section 50093). These income limits apply to State and local affordable housing programs statutorily linked to HUD income limits and differ from income limits applicable to other specific federal, State, or local programs.

The Community Development Block Grant (CDBG) program requires that each CDBG funded activity must either principally benefit low- and moderate-income persons, aid in the prevention or elimination of slums or blight, or meet a community development need having a particular urgency because existing conditions pose a serious and immediate threat to the health or welfare of the community and other financial resources are not available to meet that need. With respect to activities that principally benefit low- and moderate-income persons, at least 51 percent of the activity's beneficiaries must be low and moderate income. For CDBG, a person is considered to be of low income only if he or she is a member of a household whose income would qualify as "very low income" under the Section 8 Housing Assistance Payments program. Generally, these Section 8 limits are based on 50% of area median. Similarly, CDBG moderate income relies on Section 8 "lower income" limits, which are generally tied to 80% of area median. These data are from the 2011-2015 American Community Survey (ACS). To learn more about the Low to Moderate Income Populations visit: https://www.hudexchange.info/programs/acs-low-mod-summary-data/, for questions about the spatial attribution of this dataset, please reach out to us at GISHelpdesk@hud.gov. Data Dictionary: DD_Low to Moderate Income Populations by Block GroupDate of Coverage: ACS 2020-2016

description: Multifamily Tax Subsidy Projects (MTSP) Income Limits were developed to meet the requirements established by the Housing and Economic Recovery Act of 2008 (Public Law 110-289). MTSP Income Limits are provided and are used to determine qualification levels as well as set maximum rental rates. Complete documentation is provided for selecting Income Limits of any area of the country.; abstract: Multifamily Tax Subsidy Projects (MTSP) Income Limits were developed to meet the requirements established by the Housing and Economic Recovery Act of 2008 (Public Law 110-289). MTSP Income Limits are provided and are used to determine qualification levels as well as set maximum rental rates. Complete documentation is provided for selecting Income Limits of any area of the country.

This layer shows census tracts that meet the following definitions: Census tracts with median household incomes at or below 80 percent of the statewide median income or with median household incomes at or below the threshold designated as low income by the Department of Housing and Community Development’s list of state income limits adopted under Healthy and Safety Code section 50093 and/or Census tracts receiving the highest 25 percent of overall scores in CalEnviroScreen 4.0 or Census tracts lacking overall scores in CalEnviroScreen 4.0 due to data gaps, but receiving the highest 5 percent of CalEnviroScreen 4.0 cumulative population burden scores or Census tracts identified in the 2017 DAC designation as disadvantaged, regardless of their scores in CalEnviroScreen 4.0 or Lands under the control of federally recognized Tribes.

This layer shows median household income by race and by age of householder. This is shown by tract, county, and state boundaries. This service is updated annually to contain the most currently released American Community Survey (ACS) 5-year data, and contains estimates and margins of error. There are also additional calculated attributes related to this topic, which can be mapped or used within analysis. Median income and income source is based on income in past 12 months of survey. This layer is symbolized to show median household income. To see the full list of attributes available in this service, go to the "Data" tab, and choose "Fields" at the top right. Current Vintage: 2019-2023ACS Table(s): B19013B, B19013C, B19013D, B19013E, B19013F, B19013G, B19013H, B19013I, B19049, B19053Data downloaded from: Census Bureau's API for American Community Survey Date of API call: December 12, 2024National Figures: data.census.govThe United States Census Bureau's American Community Survey (ACS):About the SurveyGeography & ACSTechnical DocumentationNews & UpdatesThis ready-to-use layer can be used within ArcGIS Pro, ArcGIS Online, its configurable apps, dashboards, Story Maps, custom apps, and mobile apps. Data can also be exported for offline workflows. For more information about ACS layers, visit the FAQ. Please cite the Census and ACS when using this data.Data Note from the Census:Data are based on a sample and are subject to sampling variability. The degree of uncertainty for an estimate arising from sampling variability is represented through the use of a margin of error. The value shown here is the 90 percent margin of error. The margin of error can be interpreted as providing a 90 percent probability that the interval defined by the estimate minus the margin of error and the estimate plus the margin of error (the lower and upper confidence bounds) contains the true value. In addition to sampling variability, the ACS estimates are subject to nonsampling error (for a discussion of nonsampling variability, see Accuracy of the Data). The effect of nonsampling error is not represented in these tables.Data Processing Notes:This layer is updated automatically when the most current vintage of ACS data is released each year, usually in December. The layer always contains the latest available ACS 5-year estimates. It is updated annually within days of the Census Bureau's release schedule. Click here to learn more about ACS data releases.Boundaries come from the US Census TIGER geodatabases, specifically, the National Sub-State Geography Database (named tlgdb_(year)_a_us_substategeo.gdb). Boundaries are updated at the same time as the data updates (annually), and the boundary vintage appropriately matches the data vintage as specified by the Census. These are Census boundaries with water and/or coastlines erased for cartographic and mapping purposes. For census tracts, the water cutouts are derived from a subset of the 2020 Areal Hydrography boundaries offered by TIGER. Water bodies and rivers which are 50 million square meters or larger (mid to large sized water bodies) are erased from the tract level boundaries, as well as additional important features. For state and county boundaries, the water and coastlines are derived from the coastlines of the 2023 500k TIGER Cartographic Boundary Shapefiles. These are erased to more accurately portray the coastlines and Great Lakes. The original AWATER and ALAND fields are still available as attributes within the data table (units are square meters).The States layer contains 52 records - all US states, Washington D.C., and Puerto RicoCensus tracts with no population that occur in areas of water, such as oceans, are removed from this data service (Census Tracts beginning with 99).Percentages and derived counts, and associated margins of error, are calculated values (that can be identified by the "_calc_" stub in the field name), and abide by the specifications defined by the American Community Survey.Field alias names were created based on the Table Shells file available from the American Community Survey Summary File Documentation page.Negative values (e.g., -4444...) have been set to null, with the exception of -5555... which has been set to zero. These negative values exist in the raw API data to indicate the following situations:The margin of error column indicates that either no sample observations or too few sample observations were available to compute a standard error and thus the margin of error. A statistical test is not appropriate.Either no sample observations or too few sample observations were available to compute an estimate, or a ratio of medians cannot be calculated because one or both of the median estimates falls in the lowest interval or upper interval of an open-ended distribution.The median falls in the lowest interval of an open-ended distribution, or in the upper interval of an open-ended distribution. A statistical test is not appropriate.The estimate is controlled. A statistical test for sampling variability is not appropriate.The data for this geographic area cannot be displayed because the number of sample cases is too small.

Median family income (MFI) is calculated annually by the U.S. Department of Housing and Urban Development (HUD) to help set income limits that determine eligibility for assisted housing programs. HUD uses the median income from the American Community Survey (ACS) as a baseline and then factors in the national consumer price index and other variables to establish an area MFI. For more information about how HUD calculates this value, please visit: https://www.huduser.gov/portal/datasets/il.html

The Housing Affordability Data System (HADS) is a set of files derived from the 1985 and later national American Housing Survey (AHS) and the 2002 and later Metro AHS. This system categorizes housing units by affordability and households by income, with respect to the Adjusted Median Income, Fair Market Rent (FMR), and poverty income. It also includes housing cost burden for owner and renter households. These files have been the basis for the worst case needs tables since 2001. The data files are available for public use, since they were derived from AHS public use files and the published income limits and FMRs. These dataset give the community of housing analysts the opportunity to use a consistent set of affordability measures.

The Community Development Block Grant (CDBG) program requires that each CDBG funded activity must either principally benefit low- and moderate-income persons, aid in the prevention or elimination of slums or blight, or meet a community development need having a particular urgency because existing conditions pose a serious and immediate threat to the health or welfare of the community and other financial resources are not available to meet that need. With respect to activities that principally benefit low- and moderate-income persons, at least 51 percent of the activity's beneficiaries must be low and moderate income. For CDBG, a person is considered to be of low income only if he or she is a member of a household whose income would qualify as "very low income" under the Section 8 Housing Assistance Payments program. Generally, these Section 8 limits are based on 50% of area median. Similarly, CDBG moderate income relies on Section 8 "lower income" limits, which are generally tied to 80% of area median. These data are derived from the 2011-2015 American Community Survey (ACS) and based on Census 2010 geography.

To learn more about the Low to Moderate Income Populations visit: https://www.hudexchange.info/programs/acs-low-mod-summary-data/, for questions about the spatial attribution of this dataset, please reach out to us at GISHelpdesk@hud.gov. Data Dictionary: DD_Low to Moderate Income Populations by Tract

Upper income limits and income shares of total income quintiles, by economic family types.