This statistic shows the top 25 cities in the United States with the highest resident population as of July 1, 2022. There were about 8.34 million people living in New York City as of July 2022.

In 2022, San Francisco had the highest median household income of cities ranking within the top 25 in terms of population, with a median household income in of 136,692 U.S. dollars. In that year, San Jose in California was ranked second, and Seattle, Washington third.

Following a fall after the great recession, median household income in the United States has been increasing in recent years. As of 2022, median household income by state was highest in Maryland, Washington, D.C., Utah, and Massachusetts. It was lowest in Mississippi, West Virginia, and Arkansas. Families with an annual income of 25,000 and 49,999 U.S. dollars made up the largest income bracket in America, with about 25.26 million households.

Data on median household income can be compared to statistics on personal income in the U.S. released by the Bureau of Economic Analysis. Personal income rose to around 21.8 trillion U.S. dollars in 2022, the highest value recorded. Personal income is a measure of the total income received by persons from all sources, while median household income is “the amount with divides the income distribution into two equal groups,” according to the U.S. Census Bureau. Half of the population in question lives above median income and half lives below. Though total personal income has increased in recent years, this wealth is not distributed throughout the population. In practical terms, income of most households has decreased. One additional statistic illustrates this disparity: for the lowest quintile of workers, mean household income has remained more or less steady for the past decade at about 13 to 16 thousand constant U.S. dollars annually. Meanwhile, income for the top five percent of workers has actually risen from about 285,000 U.S. dollars in 1990 to about 499,900 U.S. dollars in 2020.

This dataset illustrates the largest difference between high and low temperatures and the smallest difference between high and low temperatures in cities with 50,000 people or more. A value of -1 means that the data was not applicable. Also included are the rankings, the inverse ranking to be used for mapping purposes, the popualtion, the name of city and state, and the temperature degree difference. Source City-Data URL http//www.city-data.com/top2/c489.html http//www.city-data.com/top2/c490.html Date Accessed November 13,2007

This data set describes metropolitan areas in the conterminous United States, developed from U.S. Bureau of the Census boundaries of Consolidated Metropolitan Statistical Areas (CMSA) and Metropolitan Statistical Areas (MSA), that have been processed to extract the largest contiguous urban area within each MSA or CMSA.

A dataset listing Washington cities by population for 2024.

A dataset listing Illinois cities by population for 2024.

A dataset listing Georgia cities by population for 2024.

A dataset listing Florida cities by population for 2024.

This dataset illustrates the cities with the largest wind speed differences. Also included are the city and state, the population, the speed differnce, the ranking, and the inverse ranking (to be used only for mapping purposes). Source: City-Data URL: http://www.city-data.com/top2/c466.html Date Accessed: November 9, 2007

The below dataset shows the top 800 biggest cities in the world and their populations in the year 2024. It also tells us which country and continent each city is in, and their rank based on population size. Here are the top ten cities:

• Tokyo, Japan - in Asia, with 37,115,035 people.
• Delhi, India - in Asia, with 33,807,403 people.
• Shanghai, China - in Asia, with 29,867,918 people.
• Dhaka, Bangladesh - in Asia, with 23,935,652 people.
• Sao Paulo, Brazil - in South America, with 22,806,704 people.
• Cairo, Egypt - in Africa, with 22,623,874 people.
• Mexico City, Mexico - in North America, with 22,505,315 people.
• Beijing, China - in Asia, with 22,189,082 people.
• Mumbai, India - in Asia, with 21,673,149 people.
• Osaka, Japan - in Asia, with 18,967,459 people.

About this dataset

Context

This list ranks the 946 cities in the Iowa by Hispanic Asian population, as estimated by the United States Census Bureau. It also highlights population changes in each cities over the past five years.

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 5-Year Estimates, including:

• 2019-2023 American Community Survey 5-Year Estimates
• 2018-2022 American Community Survey 5-Year Estimates
• 2017-2021 American Community Survey 5-Year Estimates
• 2016-2020 American Community Survey 5-Year Estimates
• 2015-2019 American Community Survey 5-Year Estimates

Variables / Data Columns

• Rank by Hispanic Asian Population: This column displays the rank of cities in the Iowa by their Hispanic Asian population, using the most recent ACS data available.
• cities: The cities for which the rank is shown in the previous column.
• Hispanic Asian Population: The Hispanic Asian population of the cities is shown in this column.
• % of Total cities Population: This shows what percentage of the total cities population identifies as Hispanic Asian. Please note that the sum of all percentages may not equal one due to rounding of values.
• % of Total Iowa Hispanic Asian Population: This tells us how much of the entire Iowa Hispanic Asian population lives in that cities. Please note that the sum of all percentages may not equal one due to rounding of values.
• 5 Year Rank Trend: TThis column displays the rank trend across the last 5 years.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

United States US: Population in Largest City: as % of Urban Population data was reported at 7.020 % in 2017. This records a decrease from the previous number of 7.065 % for 2016. United States US: Population in Largest City: as % of Urban Population data is updated yearly, averaging 8.675 % from Dec 1960 (Median) to 2017, with 58 observations. The data reached an all-time high of 11.200 % in 1960 and a record low of 7.020 % in 2017. United States US: Population in Largest City: as % of Urban Population data remains active status in CEIC and is reported by World Bank. The data is categorized under Global Database’s USA – Table US.World Bank.WDI: Population and Urbanization Statistics. Population in largest city is the percentage of a country's urban population living in that country's largest metropolitan area.; ; United Nations, World Urbanization Prospects.; Weighted average;

Sustainable cities depend on urban forests. City trees -- a pillar of urban forests -- improve our health, clean the air, store CO2, and cool local temperatures. Comparatively less is known about urban forests as ecosystems, particularly their spatial composition, nativity statuses, biodiversity, and tree health. Here, we assembled and standardized a new dataset of N=5,660,237 trees from 63 of the largest US cities. The data comes from tree inventories conducted at the level of cities and/or neighborhoods. Each data sheet includes detailed information on tree location, species, nativity status (whether a tree species is naturally occurring or introduced), health, size, whether it is in a park or urban area, and more (comprising 28 standardized columns per datasheet). This dataset could be analyzed in combination with citizen-science datasets on bird, insect, or plant biodiversity; social and demographic data; or data on the physical environment. Urban forests offer a rare opportunity to intentionally design biodiverse, heterogenous, rich ecosystems. Methods See eLife manuscript for full details. Below, we provide a summary of how the dataset was collected and processed.

Data Acquisition We limited our search to the 150 largest cities in the USA (by census population). To acquire raw data on street tree communities, we used a search protocol on both Google and Google Datasets Search (https://datasetsearch.research.google.com/). We first searched the city name plus each of the following: street trees, city trees, tree inventory, urban forest, and urban canopy (all combinations totaled 20 searches per city, 10 each in Google and Google Datasets Search). We then read the first page of google results and the top 20 results from Google Datasets Search. If the same named city in the wrong state appeared in the results, we redid the 20 searches adding the state name. If no data were found, we contacted a relevant state official via email or phone with an inquiry about their street tree inventory. Datasheets were received and transformed to .csv format (if they were not already in that format). We received data on street trees from 64 cities. One city, El Paso, had data only in summary format and was therefore excluded from analyses.

Data Cleaning All code used is in the zipped folder Data S5 in the eLife publication. Before cleaning the data, we ensured that all reported trees for each city were located within the greater metropolitan area of the city (for certain inventories, many suburbs were reported - some within the greater metropolitan area, others not). First, we renamed all columns in the received .csv sheets, referring to the metadata and according to our standardized definitions (Table S4). To harmonize tree health and condition data across different cities, we inspected metadata from the tree inventories and converted all numeric scores to a descriptive scale including “excellent,” “good”, “fair”, “poor”, “dead”, and “dead/dying”. Some cities included only three points on this scale (e.g., “good”, “poor”, “dead/dying”) while others included five (e.g., “excellent,” “good”, “fair”, “poor”, “dead”). Second, we used pandas in Python (W. McKinney & Others, 2011) to correct typos, non-ASCII characters, variable spellings, date format, units used (we converted all units to metric), address issues, and common name format. In some cases, units were not specified for tree diameter at breast height (DBH) and tree height; we determined the units based on typical sizes for trees of a particular species. Wherever diameter was reported, we assumed it was DBH. We standardized health and condition data across cities, preserving the highest granularity available for each city. For our analysis, we converted this variable to a binary (see section Condition and Health). We created a column called “location_type” to label whether a given tree was growing in the built environment or in green space. All of the changes we made, and decision points, are preserved in Data S9. Third, we checked the scientific names reported using gnr_resolve in the R library taxize (Chamberlain & Szöcs, 2013), with the option Best_match_only set to TRUE (Data S9). Through an iterative process, we manually checked the results and corrected typos in the scientific names until all names were either a perfect match (n=1771 species) or partial match with threshold greater than 0.75 (n=453 species). BGS manually reviewed all partial matches to ensure that they were the correct species name, and then we programmatically corrected these partial matches (for example, Magnolia grandifolia-- which is not a species name of a known tree-- was corrected to Magnolia grandiflora, and Pheonix canariensus was corrected to its proper spelling of Phoenix canariensis). Because many of these tree inventories were crowd-sourced or generated in part through citizen science, such typos and misspellings are to be expected. Some tree inventories reported species by common names only. Therefore, our fourth step in data cleaning was to convert common names to scientific names. We generated a lookup table by summarizing all pairings of common and scientific names in the inventories for which both were reported. We manually reviewed the common to scientific name pairings, confirming that all were correct. Then we programmatically assigned scientific names to all common names (Data S9). Fifth, we assigned native status to each tree through reference to the Biota of North America Project (Kartesz, 2018), which has collected data on all native and non-native species occurrences throughout the US states. Specifically, we determined whether each tree species in a given city was native to that state, not native to that state, or that we did not have enough information to determine nativity (for cases where only the genus was known). Sixth, some cities reported only the street address but not latitude and longitude. For these cities, we used the OpenCageGeocoder (https://opencagedata.com/) to convert addresses to latitude and longitude coordinates (Data S9). OpenCageGeocoder leverages open data and is used by many academic institutions (see https://opencagedata.com/solutions/academia). Seventh, we trimmed each city dataset to include only the standardized columns we identified in Table S4. After each stage of data cleaning, we performed manual spot checking to identify any issues.

A dataset listing Mississippi cities by population for 2024.

A dataset listing Tennessee cities by population for 2024.

A dataset listing Alabama cities by population for 2024.

A dataset listing New Mexico cities by population for 2024.

About this dataset

Context

The dataset tabulates the Florida City population distribution across 18 age groups. It lists the population in each age group along with the percentage population relative of the total population for Florida City. The dataset can be utilized to understand the population distribution of Florida City by age. For example, using this dataset, we can identify the largest age group in Florida City.

Key observations

The largest age group in Florida City, FL was for the group of age 15 to 19 years years with a population of 1,187 (9.28%), according to the ACS 2019-2023 5-Year Estimates. At the same time, the smallest age group in Florida City, FL was the 80 to 84 years years with a population of 79 (0.62%). Source: U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Content

When available, the data consists of estimates from the U.S. Census Bureau American Community Survey (ACS) 2019-2023 5-Year Estimates

Age groups:

• Under 5 years
• 5 to 9 years
• 10 to 14 years
• 15 to 19 years
• 20 to 24 years
• 25 to 29 years
• 30 to 34 years
• 35 to 39 years
• 40 to 44 years
• 45 to 49 years
• 50 to 54 years
• 55 to 59 years
• 60 to 64 years
• 65 to 69 years
• 70 to 74 years
• 75 to 79 years
• 80 to 84 years
• 85 years and over

Variables / Data Columns

• Age Group: This column displays the age group in consideration
• Population: The population for the specific age group in the Florida City is shown in this column.
• % of Total Population: This column displays the population of each age group as a proportion of Florida City total population. Please note that the sum of all percentages may not equal one due to rounding of values.

Good to know

Margin of Error

Data in the dataset are based on the estimates and are subject to sampling variability and thus a margin of error. Neilsberg Research recommends using caution when presening these estimates in your research.

Custom data

If you do need custom data for any of your research project, report or presentation, you can contact our research staff at research@neilsberg.com for a feasibility of a custom tabulation on a fee-for-service basis.

Inspiration

Neilsberg Research Team curates, analyze and publishes demographics and economic data from a variety of public and proprietary sources, each of which often includes multiple surveys and programs. The large majority of Neilsberg Research aggregated datasets and insights is made available for free download at https://www.neilsberg.com/research/.

Recommended for further research

This dataset is a part of the main dataset for Florida City Population by Age. You can refer the same here

A dataset listing Arkansas cities by population for 2024.

A dataset listing Montana cities by population for 2024.