The files linked to this reference are the geospatial data created as part of the completion of the baseline vegetation inventory project for the NPS park unit. Current format is ArcGIS file geodatabase but older formats may exist as shapefiles. GIS Database 2002-2005: Project Size = 1,898 acres Fort Larned National Historic Site (including the Rut Site) = 705 acres 16 Map Classes 11 Vegetated 5 Non-vegetated Minimum Mapping Unit = ½ hectare is the program standard but this was modified at FOLS to ¼ acre. Total Size = 229 Polygons Average Polygon Size = 8.3 acres Overall Thematic Accuracy = 92% To produce the digital map, a combination of 1:8,500-scale (0.75 meter pixels) color infrared digital ortho-imagery acquired on October 26, 2005 by the Kansas Applied Remote Sensing Program and 1:12,000-scale true color ortho-rectified imagery acquired in 2005 by the U.S. Department of Agriculture - Farm Service Agency’s Aerial Photography Field Office, and all of the GPS referenced ground data were used to interpret the complex patterns of vegetation and land-use. In the end, 16 map units (11 vegetated and 5 land-use) were developed and directly cross-walked or matched to corresponding plant associations and land-use classes. All of the interpreted and remotely sensed data were converted to Geographic Information System (GIS) databases using ArcGIS© software. Draft maps were printed, field tested, reviewed and revised. One hundred and six accuracy assessment (AA) data points were collected in 2006 by KNSHI and used to determine the map’s accuracy. After final revisions, the accuracy assessment revealed an overall thematic accuracy of 92%.

Web Map Service to view health care thematic data.

This dataset is the first 1: 100,000 desert spatial database in China based on the graphic data of desert thematic maps. It mainly reflects the geographical distribution, area size, and mobility of sand dunes in China. According to the system design requirements and relevant standards, the input data is standardized and uniformly converted into a standard format for various types of data input. Build a library to run the delivery system. This project uses the TM image in 2000 as the information source, and interprets, extracts, and edits the coverage of the national land use map and TM digital image information in 2000. It uses remote sensing and geographic information system technology to 1: 100,000 Thematic mapping requirements for scale bar maps were made on the desert, sandy land and gravel Gobi in China. The 1: 100,000 desert map across the country can save users a lot of data entry and editing work when they are engaged in research on resources and the environment. Digital maps can be easily converted into layout maps The dataset properties are as follows: Divided into two folders e00 and shp: Desert map name and province comparison table in each folder 01 Ahsm Anhui 02 Bjsm Beijing 03 Fjsm Fujian 04 Gdsm Guangdong 05 Gssm Gansu 06 Gxsm Guangxi Zhuang Autonomous Region 07 Gzsm Guizhou 08 Hebsm Hebei 09 Hensm Henan 10 Hljsm Heilongjiang 11 Hndsm Hainan 12 Hubsm Hubei 13 Jlsm Jilin Province 14 Jssm Jiangsu 15 Jxsm Jiangxi 16 Lnsm Liaoning 17 Nmsm Inner Mongolia Gu Autonomous Region 18 Nxsm Ningxia Hui Autonomous Region 19 Qhsm Qinghai 20 Scsm Sichuan 21 Sdsm Shandong 22 Sxsm Shaanxi Province 23 Tjsm Tianjin 24 Twsm Taiwan Province 25 Xjsm Xinjiang Uygur Autonomous Region 26 Xzsm Tibet Autonomous Region 27 Zjsm Zhejiang 28 Shxsm Shanxi 1. Data projection: Projection: Albers False_Easting: 0.000000 False_Northing: 0.000000 Central_Meridian: 105.000000 Standard_Parallel_1: 25.000000 Standard_Parallel_2: 47.000000 Latitude_Of_Origin: 0.000000 Linear Unit: Meter (1.000000) 2. Data attribute table: area (area) perimeter ashm_ (sequence code) class (desert encoding) ashm_id (desert encoding) 3. Desert coding: mobile sandy land 2341010 Semi-mobile sandy land Semi-fixed sandy land 2341030 Gobi 2342000 Saline land 2343000 4: File format: National, sub-provincial and county-level desert map data types are vector shapefiles and E00 5: File naming: Data organization based on the National Basic Resources and Environmental Remote Sensing Dynamic Information Service System is performed on the file management layer of Windows NT. The file and directory names are compound names of English characters and numbers. Pinyin + SM composition, such as the desert map of Gansu Province is GSSM. The flag and county desert map is the pinyin + xxxx of the province name, and xxxx is the last four digits of the flag and county code. The division of provinces, districts, flags and counties is based on the administrative division data files in the national basic resources and environmental remote sensing dynamic information service operation system.

This thematic map series provides the distribution of the various environmental mitigations across hydropower plants within the US.

The dataset presents the estimated occurrence of less common tree species (other than pine and spruce) in the form of thematic maps covering entire area of Finland. The maps series represent the following years: 1994, 2002, 2009 and 2015. The tree species maps are based on geostatistical interpolation of field measurements from national forest inventory sample plots and satellite image-based forest resource estimates. The occurrence data is presented as the average volume (m3/ha) of the tree species in forestry land. The tree species maps are available as ESRI polygon shapefiles where Finland is divided into 1 x 1 km2 square polygons for which the tree species data is estimated. Koordinaattijärjestelmä: ETRS89 / ETRS-TM35FIN (EPSG:3067)

This map layer is a thematic raster image of MTBS burn severity classes for all inventoried fires occurring in CONUS during calendar year 2019 that do not meet standard MTBS size criteria. These data are published to augment the data that are available from the MTBS program. This product was produced using the methods of the Monitoring Trends in Burn Severity Program (MTBS), however these fires do not meet the size criteria for a standard MTBS assessment. The MTBS Program assesses the frequency, extent, and magnitude (size and severity) of all large wildland fires (wildfires and prescribed fires) in the conterminous United States (CONUS), Alaska, Hawaii, and Puerto Rico for the period 1984 and beyond. MTBS typically maps fires using an initial assessment (immediately after the fire) or an extended assessment (peak of green the season after the fire) for low-biomass and high-biomass fires respectively. Refer to MTBS.gov for more information on MTBS methods and criteria. Standard MTBS mappings must meet the size criteria of at least 500 acres for the eastern states and territories and 1,000 acres for the western states and territories to be eligible for mapping. Undersized MTBS fires are those fires that do not meet the standard MTBS size criteria but are otherwise mapped using standard MTBS methodologies.

Thematic soil maps show the distribution of a specific soil property or theme, such as topsoil organic carbon content or soil texture.

Soil Data Viewer is a tool built as an extension to ArcMap that allows a user to create soil-based thematic maps. The application can also be run independently of ArcMap, but output is then limited to a tabular report. The soil survey attribute database associated with the spatial soil map is a complicated database with more than 50 tables. Soil Data Viewer provides users access to soil interpretations and soil properties while shielding them from the complexity of the soil database. Each soil map unit, typically a set of polygons, may contain multiple soil components that have different use and management. Soil Data Viewer makes it easy to compute a single value for a map unit and display results, relieving the user from the burden of querying the database, processing the data and linking to the spatial map. Soil Data Viewer contains processing rules to enforce appropriate use of the data. This provides the user with a tool for quick geospatial analysis of soil data for use in resource assessment and management. Resources in this dataset:Resource Title: Soil Data Viewer. File Name: Web Page, url: https://www.nrcs.usda.gov/wps/portal/nrcs/detail/soils/home/?cid=nrcs142p2_053620 Soil Data Viewer is a tool built as an extension to ArcMap that allows a user to create soil-based thematic maps. The application can also be run independent of ArcMap, but output is then limited to a tabular report. Soil Data Viewer contains processing rules to enforce appropriate use of the data. This provides the user with a tool for quick geospatial analysis of soil data for use in resource assessment and management. Links to download and install Download Soil Data Viewer 6.2 for use with ArcGIS 10.x and Windows XP, Windows 7, Windows 8.x, or Windows 10. Earlier versions are also available.

The 2023 cartographic boundary shapefiles are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. Block Groups (BGs) are clusters of blocks within the same census tract. Each census tract contains at least one BG, and BGs are uniquely numbered within census tracts. BGs have a valid code range of 0 through 9. BGs have the same first digit of their 4-digit census block number from the same decennial census. For example, tabulation blocks numbered 3001, 3002, 3003,.., 3999 within census tract 1210.02 are also within BG 3 within that census tract. BGs coded 0 are intended to only include water area, no land area, and they are generally in territorial seas, coastal water, and Great Lakes water areas. Block groups generally contain between 600 and 3,000 people. A BG usually covers a contiguous area but never crosses county or census tract boundaries. They may, however, cross the boundaries of other geographic entities like county subdivisions, places, urban areas, voting districts, congressional districts, and American Indian / Alaska Native / Native Hawaiian areas. The generalized BG boundaries in this release are based on those that were delineated as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2020 Census.

These raster and vector datasets were developed for the Sea Grant South Coast MPA Baseline Program as part of the project “Nearshore Substrate Mapping and Change Analysis using Historical and Concurrent Multispectral Imagery” (#R/MPA 30 10-049). The study region is the South Coast Region (SCR). Kelp thematic maps from 1999-2012 were used for this product. Ocean Imaging acquired the imagery and classification data used for this analysis from its own Digital Multispectral Camera (DMSC), the Microsoft UltraCam-X aerial camera system and from kelp habitat classifications archived by the California Department of Fish and Wildlife (CDFW). Details on this systems and the data processing are below in the Lineage section of this document. The persistence analyses show the persistence of kelp beds in the SCR and MPAs as a percentage of the number of years analyzed. The coverage area is from Conception, CA south to Imperial Beach, CA. The GIS analysis product files are deliverd are in GeoTIFF (.tif) and ESRI Shapefile formats as well as Adobe Acrobat PDF files. This raster dataset contains a persistence analysis of giant kelp beds along the California South Coast Region (SCR) from from Point Conception, CA down to Imperial beach, CA. This specific raster classification includes the Lover's Cove SMCA and Casino Point SMCA. This dataset was originally uploaded to Oceanspaces (http://oceanspaces.org/) and the Knowledge Network for Biocomplexity (KNB, https://knb.ecoinformatics.org/data) in 2013 as part of the South Coast baseline monitoring program. In 2022 this dataset was moved to the California Ocean Protection Council Data Repository (https://opc.dataone.org/) by Mike Esgro (Michael.Esgro@resources.ca.gov) and Rani Gaddam (gaddam@ucsc.edu). At that time the GIS analysis products were added to the dataset. The long-term California MPA boundary and project info tables can be found as a separate dataset here: https://opc.dataone.org/view/doi:10.25494/P64S3W.

This map provides a guide to the data confidence of DPIE's soil related thematic map products in NSW. Examples of products this map supports includes Land and Soil Capability mapping, Inherent …Show full descriptionThis map provides a guide to the data confidence of DPIE's soil related thematic map products in NSW. Examples of products this map supports includes Land and Soil Capability mapping, Inherent fertility of soils in NSW and Great Soil Group soil types in NSW. Confidence classes are determined based on the data scale, type of mapping and information collected, accuracy of the attributes and quality assurance on the product. Soil data confidence is described using a 4 class system between high and very low as outlined below.: Good (1) - All necessary soil and landscape data is available at a catchment scale (1:100,000 & 1:250,000) to undertake the assessment of LSC and other soil thematic maps. Moderate (2) - Most soil and landscape data is available at a catchment scale (1:100,000 - 1:250,000) to undertake the assessment of LSC and other soil thematic maps. Low (3) - Limited soil and landscape data is available at a reconnaissance catchment scale (1:100,000 & 1:250,000) which limits the quality of the assessment of LSC and other soil thematic maps. Very low (4) - Very limited soil and landscape data is available at a broad catchment scale (1:250,000 - 1:500,000) and the LSC and other soil thematic maps should be used as a guide only. Online Maps: This dataset can be viewed using eSPADE (NSW’s soil spatial viewer), which contains a suite of soil and landscape information including soil profile data. Many of these datasets have hot-linked soil reports. An alternative viewer is the SEED Map; an ideal way to see what other natural resources datasets (e.g. vegetation) are available for this map area. Reference: Department of Planning, Industry and Environment, 2020, Soil Data Confidence map for NSW, Version 4, NSW Department of Planning, Industry and Environment, Parramatta.

The 2019 cartographic boundary shapefiles are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. The cartographic boundary files include both incorporated places (legal entities) and census designated places or CDPs (statistical entities). An incorporated place is established to provide governmental functions for a concentration of people as opposed to a minor civil division (MCD), which generally is created to provide services or administer an area without regard, necessarily, to population. Places always nest within a state, but may extend across county and county subdivision boundaries. An incorporated place usually is a city, town, village, or borough, but can have other legal descriptions. CDPs are delineated for the decennial census as the statistical counterparts of incorporated places. CDPs are delineated to provide data for settled concentrations of population that are identifiable by name, but are not legally incorporated under the laws of the state in which they are located. The boundaries for CDPs often are defined in partnership with state, local, and/or tribal officials and usually coincide with visible features or the boundary of an adjacent incorporated place or another legal entity. CDP boundaries often change from one decennial census to the next with changes in the settlement pattern and development; a CDP with the same name as in an earlier census does not necessarily have the same boundary. The only population/housing size requirement for CDPs is that they must contain some housing and population. The boundaries of most incorporated places in this file are as of January 1, 2019, as reported through the Census Bureau's Boundary and Annexation Survey (BAS). The boundaries of all CDPs were delineated as part of the Census Bureau's Participant Statistical Areas Program (PSAP) for the 2010 Census.

The 2015 cartographic boundary KMLs are simplified representations of selected geographic areas from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB). These boundary files are specifically designed for small-scale thematic mapping. When possible, generalization is performed with the intent to maintain the hierarchical relationships among geographies and to maintain the alignment of geographies within a file set for a given year. Geographic areas may not align with the same areas from another year. Some geographies are available as nation-based files while others are available only as state-based files. The records in this file allow users to map the parts of Urban Areas that overlap a particular county. After each decennial census, the Census Bureau delineates urban areas that represent densely developed territory, encompassing residential, commercial, and other nonresidential urban land uses. In general, this territory consists of areas of high population density and urban land use resulting in a representation of the "urban footprint." There are two types of urban areas: urbanized areas (UAs) that contain 50,000 or more people and urban clusters (UCs) that contain at least 2,500 people, but fewer than 50,000 people (except in the U.S. Virgin Islands and Guam which each contain urban clusters with populations greater than 50,000). Each urban area is identified by a 5-character numeric census code that may contain leading zeroes. The primary legal divisions of most states are termed counties. In Louisiana, these divisions are known as parishes. In Alaska, which has no counties, the equivalent entities are the organized boroughs, city and boroughs, municipalities, and for the unorganized area, census areas. The latter are delineated cooperatively for statistical purposes by the State of Alaska and the Census Bureau. In four states (Maryland, Missouri, Nevada, and Virginia), there are one or more incorporated places that are independent of any county organization and thus constitute primary divisions of their states. These incorporated places are known as independent cities and are treated as equivalent entities for purposes of data presentation. The District of Columbia and Guam have no primary divisions, and each area is considered an equivalent entity for purposes of data presentation. The Census Bureau treats the following entities as equivalents of counties for purposes of data presentation: Municipios in Puerto Rico, Districts and Islands in American Samoa, Municipalities in the Commonwealth of the Northern Mariana Islands, and Islands in the U.S. Virgin Islands. The entire area of the United States, Puerto Rico, and the Island Areas is covered by counties or equivalent entities. The boundaries for counties and equivalent entities are as of January 1, 2010.

Abstract This dataset was supplied to the Bioregional Assessment Programme by a third party and is presented here as originally supplied. Metadata was not provided and has been compiled by the …Show full descriptionAbstract This dataset was supplied to the Bioregional Assessment Programme by a third party and is presented here as originally supplied. Metadata was not provided and has been compiled by the Bioregional Assessment Programme based on the known details at the time of acquisition. A list of hard copy maps. The map catalogue list almost 250 map titles. It contains maps that can be divided into three categories: (1) Statewide Geology, geophysical and thematic maps (2) Geology - Standard series geology maps covering a map sheet, mainly 1:250,000 and 1:100,000 scales with some at 1:500,00, 1:50,000 and 1:25,000. (3) Metallogenic - Maps depicting mineral resources, mainly 1:250,00 scale. Contact: geoscience.products@minerals.nsw.gov.au This dataset has been provided to the BA Programme for use within the programme only. Third parties should contact the NSW Department of Industry. http://www.industry.nsw.gov.au/ Dataset History This shapefile consists of published geological maps by Geological Survey of NSW for various locations located in NSW and held by NSW Department of Trade and Investment. Dataset Citation NSW Trade and Investment (2004) Geological Maps Combined for NSW. Bioregional Assessment Source Dataset. Viewed 18 July 2018, http://data.bioregionalassessments.gov.au/dataset/f507bb28-8095-43f8-901e-565699a290b5.

This dataset combines the work of several different projects to create a seamless data set for the contiguous United States. Data from four regional Gap Analysis Projects and the LANDFIRE project were combined to make this dataset. In the northwestern United States (Idaho, Oregon, Montana, Washington and Wyoming) data in this map came from the Northwest Gap Analysis Project. In the southwestern United States (Colorado, Arizona, Nevada, New Mexico, and Utah) data used in this map came from the Southwest Gap Analysis Project. The data for Alabama, Florida, Georgia, Kentucky, North Carolina, South Carolina, Mississippi, Tennessee, and Virginia came from the Southeast Gap Analysis Project and the California data was generated by the updated California Gap land cover project. The Hawaii Gap Analysis project provided the data for Hawaii. In areas of the county (central U.S., Northeast, Alaska) that have not yet been covered by a regional Gap Analysis Project, data from the Landfire project was used. Similarities in the methods used by these projects made possible the combining of the data they derived into one seamless coverage. They all used multi-season satellite imagery (Landsat ETM+) from 1999-2001 in conjunction with digital elevation model (DEM) derived datasets (e.g. elevation, landform) to model natural and semi-natural vegetation. Vegetation classes were drawn from NatureServe's Ecological System Classification (Comer et al. 2003) or classes developed by the Hawaii Gap project. Additionally, all of the projects included land use classes that were employed to describe areas where natural vegetation has been altered. In many areas of the country these classes were derived from the National Land Cover Dataset (NLCD). For the majority of classes and, in most areas of the country, a decision tree classifier was used to discriminate ecological system types. In some areas of the country, more manual techniques were used to discriminate small patch systems and systems not distinguishable through topography. The data contains multiple levels of thematic detail. At the most detailed level natural vegetation is represented by NatureServe's Ecological System classification (or in Hawaii the Hawaii GAP classification). These most detailed classifications have been crosswalked to the five highest levels of the National Vegetation Classification (NVC), Class, Subclass, Formation, Division and Macrogroup. This crosswalk allows users to display and analyze the data at different levels of thematic resolution. Developed areas, or areas dominated by introduced species, timber harvest, or water are represented by other classes, collectively refered to as land use classes; these land use classes occur at each of the thematic levels. Raster data in both ArcGIS Grid and ERDAS Imagine format is available for download at http://gis1.usgs.gov/csas/gap/viewer/land_cover/Map.aspx Six layer files are included in the download packages to assist the user in displaying the data at each of the Thematic levels in ArcGIS. In adition to the raster datasets the data is available in Web Mapping Services (WMS) format for each of the six NVC classification levels (Class, Subclass, Formation, Division, Macrogroup, Ecological System) at the following links. http://gis1.usgs.gov/arcgis/rest/services/gap/GAP_Land_Cover_NVC_Class_Landuse/MapServer http://gis1.usgs.gov/arcgis/rest/services/gap/GAP_Land_Cover_NVC_Subclass_Landuse/MapServer http://gis1.usgs.gov/arcgis/rest/services/gap/GAP_Land_Cover_NVC_Formation_Landuse/MapServer http://gis1.usgs.gov/arcgis/rest/services/gap/GAP_Land_Cover_NVC_Division_Landuse/MapServer http://gis1.usgs.gov/arcgis/rest/services/gap/GAP_Land_Cover_NVC_Macrogroup_Landuse/MapServer http://gis1.usgs.gov/arcgis/rest/services/gap/GAP_Land_Cover_Ecological_Systems_Landuse/MapServer

CanVec contains more than 60 topographic features classes organized into 8 themes: Transport Features, Administrative Features, Hydro Features, Land Features, Manmade Features, Elevation Features, Resource Management Features and Toponymic Features. This multiscale product originates from the best available geospatial data sources covering Canadian territory. It offers quality topographic information in vector format complying with international geomatics standards. CanVec can be used in Web Map Services (WMS) and geographic information systems (GIS) applications and used to produce thematic maps. Because of its many attributes, CanVec allows for extensive spatial analysis. Related Products: Constructions and Land Use in Canada - CanVec Series - Manmade Features Lakes, Rivers and Glaciers in Canada - CanVec Series - Hydrographic Features Administrative Boundaries in Canada - CanVec Series - Administrative Features Mines, Energy and Communication Networks in Canada - CanVec Series - Resources Management Features Wooded Areas, Saturated Soils and Landscape in Canada - CanVec Series - Land Features Transport Networks in Canada - CanVec Series - Transport Features Elevation in Canada - CanVec Series - Elevation Features Map Labels - CanVec Series - Toponymic Features

TIGERweb allows the viewing of TIGER spatial data online and for TIGER data to be streamed to your mapping application. TIGERweb consists of a web mapping service and a REST service. Thew web mapping service is an Open Geospatial Consortium (OGC) service that allows users to visualize our TIGER (Topologically Integrated Geographic Encoding and Referencing database) data. This service consists of two applications and eight services. The applications allow users to select features and view their attributes, to search for features by name or geocode, and to identify features by selecting them from a map. The TIGERweb applications are a simple way to view our TIGER data without having to download the data. The web Mapping services provide a simple HTTP interface for requesting geo-registered map images from our geospatial database. It allows users to produce maps containing TIGERweb layers with layers from other servers. TIGERweb consists of the following two applications and eight services: Applications: TIGERweb, TIGERweb Decennial Services: Current, ACS16, ACS15, ACS14, ACS13, Econ12, Census 2010 (for the TIGERweb application), Physical Features (for the TIGERweb application), Census 2010 (for the TIGERweb Decennial application), Census 2000 and Physical Features (for the TIGERweb Decennial application) The REST service is a way for Web clients to communicate with geographic information system (GIS) servers through Representational State Transfer (REST) technology. It allows users to interface with the REST server with structured URLs using a computer language like PYTHON or JAVA. The server responds with map images, text-based geographic information, or other resources that satisfy the request. There are three groups of services: TIGERweb, TIGERweb Generalized and TIGERweb Decennial. TIGERweb consists of boundaries as of January 1, 2016 while TIGERweb Decennial consists of boundaries as they were of January 1, 2010. TIGERweb Generalized is specifically designed for small-scale thematic mapping. The following REST services are offered for both groups: American Indian, Alaska Native, and Native Hawaiian Areas Census Regions and Divisions Census Tracts and Blocks Legislative Areas Metropolitan and Micropolitan Statistical Areas and Related Statistical Areas Places and County Subdivisions PUMAs, UGAs and ZCTAs School Districts States and Counties Urban Areas The following services are only offered in TIGERweb and TIGERweb Decennial: Hydrography Labels Military and Other Special Land Use Areas Transportation (Roads and Railroads) Tribal Census Tracts and Block Groups The following services is only offered in TIGERweb Generalized: Places and County Subdivisions (Economic Places)

Abstract

This dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are presented here as originally supplied. The polygons in this dataset are a digital representation of the distribution or extent of geological units within the area. Polygons have a range of attributes including unit name, age, lithological description and an abbreviated symbol for use in labelling the polygons. These have been extracted from the Rock Units Table held in the Department of Natural Resources, Mines and Energy Merlin Database.

Purpose

To display the geology polygons which define the extent of rock units.

Dataset History

Supplemental_Information:

Data captured at 1:40 000 scale. The data set is sourced from the Department's Geoscience and Resources Database (GRDB), a component of the Mineral and Energy Resources Location and Information Network (MERLIN) corporate database.(GRDB), a component of the Mineral and Energy Resources Location and Information Network (MERLIN) corporate database.



NOTE: GEOLDATA was in most cases compiled based on Datum AGD66. The map tile coverages so compiled have now been projected to geographics based on Datum GDA94. Consequently the boundaries for these map tiles will not conform to the Latitude and Longitude graticule based on Datum GDA94.

Entity_and_Attribute_Information:

Detailed_Description:



  Entity_Type:



    Entity_Type_Label: 9341_r

    Entity_Type_Definition:

      Polygons have a range of attributes including unit name, age, lithological description and an abbreviated symbol for use in labelling the polygons. 

    Entity_Type_Definition_Source:

      The Rock Units Table held in the Department of Natural Resources, Mines and Energy Merlin Database. 



  Attribute:



    Attribute_Label: FID

    Attribute_Definition: Internal feature number.

    Attribute_Definition_Source: ESRI

    Attribute_Domain_Values:



      Unrepresentable_Domain:

        Sequential unique whole numbers that are automatically generated. 



    Beginning_Date_of_Attribute_Values: March 2004



  Attribute:



    Attribute_Label: Shape

    Attribute_Definition: Feature geometry.

    Attribute_Definition_Source: ESRI

    Attribute_Domain_Values:



      Unrepresentable_Domain: Coordinates defining the features.



  Attribute:



    Attribute_Label: KEY

    Attribute_Definition: Unique polygon identifier and relate item for poygon attributes



  Attribute:



    Attribute_Label: ROCK_U_NAM

    Attribute_Definition:

      The Map Unit Name of the polygon. In the case of named units it comprises of the standard binomial name. Unnamed subdivisions of named units include the binomial name with a letter symbol as a suffix. Unnamed units are represented by a letter symbol, usually in combination with a map sheet number. 



  Attribute:



    Attribute_Label: AGE

    Attribute_Definition: Geological age of unit



  Attribute:



    Attribute_Label: LITH_SUMMA

    Attribute_Definition:

      Provides a brief description of the map units as they have been described in the course of the project work, or as has appeared on relevant hard copy map legends. 



  Attribute:



    Attribute_Label: ROCK_U_TYP

    Attribute_Definition:

      Provides a means of separating map units, eg for constructing a map reference. This item will contain one of the following: STRAT- Stratigraphic unit, including sedimentary, volcanic and metamorphic rock units. INTRU- Intrusive rock units; COMPST- Compound unit where the polygon includes two or more rock units, either stratigraphic, intrusive or both; COMPST- Compound unit, as above where the dominant or topmost unit is of the STRAT type; COMPIN- Compound unit, as above, where the dominant unit is of the INTRU type; WATER- Water bodies- Large dams, lakes, waterholes. 



  Attribute:



    Attribute_Label: SEQUENCE_N

    Attribute_Definition:

      A numeric field to allow sorting of the rock units in approximate stratigraphic order as they would appear on a map legend. 



  Attribute:



    Attribute_Label: DOMINANT_R

    Attribute_Definition:

      A simplified lithological description to allow generation of thematic maps based on broad rock types. 



  Attribute:



    Attribute_Label: MAP_SYMBOL

    Attribute_Definition:

      Provides an abbreviated label for polygons. Mostly based on the letter symbols as they appear on published maps or the original hard copy compilation sheets. These are not unique across the State, but should be unique within a single map tile, and usually adjacent tiles. 



  Attribute:



    Attribute_Label: NAME_100K

    Attribute_Definition: Name of 1:100 000 map sheet coincident with the data extent.



Overview_Description:



  Entity_and_Attribute_Overview:

    Polygon Attribute information includes Polygon Key, Rock Unit Name, Age, Lithology, Rock Unit Type, Map Symbol and 1:100 000 sheet name.

Dataset Citation

"Queensland Department of Natural Resources, Mines and Energy" (2014) Qld 100k mapsheets - Warwick. Bioregional Assessment Source Dataset. Viewed 28 September 2017, http://data.bioregionalassessments.gov.au/dataset/3e2fa307-1f06-4873-96d3-5c3e5638894a.

From gridded National Soil Survey Geographic Database (gNATSGO). Used Soil Data Development Toolbox > gSSURGO Mapping Toolset > Create Soil Map Tool, Exported Data Layer to TIFF, and Used Spatial Analyst > Reclass > Lookup Tool to create this data layer and display the HYDROLGRP_. Follow instructions in "How to Create an On-Demand Soil Property or Interpretation Grid from gNATSGO". Shows sSSURGO data for California. A - sand, loamy sand, sandy loam B - loam, silt, loam or silt C - sandy clay loam D - clay loam, silty clay loam, sandy clay, silty clay, or clay The gridded National Soil Survey Geographic Database (gNATSGO) is a USDA-NRCS Soil & Plant Science Division (SPSD) composite database that provides complete coverage of the best available soils information for all areas of the United States and Island Territories. It was created by combining data from the Soil Survey Geographic Database (SSURGO), State Soil Geographic Database (STATSGO2), and Raster Soil Survey Databases (RSS) into a single seamless ESRI file geodatabase. The state-wide gNATSGO databases contain a 10-meter raster of the soil map units and 70 related tables of soil properties and interpretations. It is designed to work with the SPSD gSSURGO ArcTools. Users can create full coverage thematic maps and grids of soil properties and interpretations for large geographic areas, such as the extent of a State or the conterminous United States. Please note that for the CONUS database, only a 30 meter raster is included. SSURGO is the SPSD flagship soils database that has over 100 years of field-validated detailed soil mapping data. SSURGO contains soils information for more than 90 percent of the United States and island territories, but unmapped land remains. Click here for the current completion status of SSURGO mapping. STATSGO2 is a general soil map that has soils data for all of the United States and island territories, but the data is not as detailed as the SSURGO data. The Raster Soil Surveys (RSSs) are the next generation soil survey databases developed using advanced digital soil mapping methods. https://www.nrcs.usda.gov/wps/portal/nrcs/detail/soils/survey/geo/?cid=nrcseprd1464625) Use the Create A Soil Map ArcTool from the gSSURGO Mapping Toolset in the Soil Data Development Toolbox to make a TIFF data layer (Instructions: https://www.nrcs.usda.gov/wps/portal/nrcs/detail/soils/survey/geo/?cid=nrcseprd1464625#grid). Make a Hydrological Soils Group Map, and display it using the Hydrolgrp_ attribute. NotesThe SPSD refreshes all published soil databases annually. gNATSGO will be included in the refresh cycle, which will provide a new up-to-date version of the database each year. gNATSGO is an ESRI file geodatabase. The soil map units are delivered only as a 10-meter raster version and are uniquely identified by the mukey, which is included in the attribute table. No vectorized version of the soil map units is included in gNATSGO. The database has 70 tables that contain soil attributes, and relationship classes are built into the database to define relationships among tables. The raster can be joined to the Mapunit and Muaggatt tables in the MUKEY field. The database contains a feature class called SAPOLYGON. The “source” field in this feature class indicates whether the data was derived from SSURGO, STATSGO2, or an RSS. A gNATSGO database was created for the conterminous United States and for each state or island territory that does not have complete coverage in SSURGO or has a published RSS. If you encounter an ArcMap error when working with a gNATSGO dataset that reads “The number of unique values exceeds the limit” try increasing the maximum number of unique values to render in your Raster ArcMap Options. Specific instructions can be obtained here: https://support.esri.com/en/technical-article/000010117

MO_degrado_geomorf_poly_3 — represents the elements of geomorphological degradation — area type — elements of the map of alterations and degradation of the territory on a scale of 1:25 000 The maps PTPAAV (Territorial Environmental Country Plan of Vasta Area) are a series of thematic maps drawn up since 1989 and finished and approved at the end of November 1991, are divided into territorial areas for a total of 8 areas identified on the regional territory. The work was carried out by several groups of technicians, a coordination group which established by circulars the standards to be used for the drafting of plans ranging from the thickness of the graph tip to the type of retino and the nuances to be used, and 8 design groups one for each area, which have created the maps trying to standardise spatial information as much as possible. The paperwork of this work was delivered to us in 2008 by the Environmental Heritage Office of the Molise Region. The latter already had scans of some thematic cards related to some areas, the missing ones and in the case of scans not found suitable for georeference, have been scanned. The mapping basis used by the working groups for the creation of PTPAAV maps was the IGM on a scale of 1:25,000.