This is a high resolution spatial dataset of Digital Surface Model (DSM) data in South West England. It is a part of outcomes from the CEH South West (SW) Project. There is also a Digital Terrain Model (DTM) dataset covering the same areas available from the SW project. Both DTM and DSM cover an area of 9424 km2 that includes all the land west of Exmouth (i.e. west of circa 3 degrees 21 minutes West). The DSM includes the height of features on the bare earth such as buildings or vegetation (if present). An overview of the TELLUS project is available on the web at http://www.tellusgb.ac.uk/.

These datasets consist of four, 1-meter spatial resolution digital surface models (DSMs) that were generated to orthorectify airborne multispectral imagery acquired in 2002, 2009, 2013, and 2021 for the Colorado River in Grand Canyon in Arizona, USA. These datasets also consist of a 1-meter spatial resolution digital elevation model (DEM) that was generated from the 2021 DSM. The DSMs and DEM were also produced to support development of additional GIS products. Elevation values are expressed as ellipsoid heights. These datasets also include accuracy assessments that were performed to show the limitations of estimating elevation from the DSMs and DEM pixels locations on the landscape. Data were acquired during periods of low steady Colorado River flow of approximately 8,000 cubic feet per second released from Glen Canyon Dam.

The High Resolution Digital Elevation Model (HRDEM) product is derived from airborne LiDAR data (mainly in the south) and satellite images in the north. The complete coverage of the Canadian territory is gradually being established. It includes a Digital Terrain Model (DTM), a Digital Surface Model (DSM) and other derived data. For DTM datasets, derived data available are slope, aspect, shaded relief, color relief and color shaded relief maps and for DSM datasets, derived data available are shaded relief, color relief and color shaded relief maps. The productive forest line is used to separate the northern and the southern parts of the country. This line is approximate and may change based on requirements. In the southern part of the country (south of the productive forest line), DTM and DSM datasets are generated from airborne LiDAR data. They are offered at a 1 m or 2 m resolution and projected to the UTM NAD83 (CSRS) coordinate system and the corresponding zones. The datasets at a 1 m resolution cover an area of 10 km x 10 km while datasets at a 2 m resolution cover an area of 20 km by 20 km. In the northern part of the country (north of the productive forest line), due to the low density of vegetation and infrastructure, only DSM datasets are generally generated. Most of these datasets have optical digital images as their source data. They are generated at a 2 m resolution using the Polar Stereographic North coordinate system referenced to WGS84 horizontal datum or UTM NAD83 (CSRS) coordinate system. Each dataset covers an area of 50 km by 50 km. For some locations in the north, DSM and DTM datasets can also be generated from airborne LiDAR data. In this case, these products will be generated with the same specifications as those generated from airborne LiDAR in the southern part of the country. The HRDEM product is referenced to the Canadian Geodetic Vertical Datum of 2013 (CGVD2013), which is now the reference standard for heights across Canada. Source data for HRDEM datasets is acquired through multiple projects with different partners. Since data is being acquired by project, there is no integration or edgematching done between projects. The tiles are aligned within each project. The product High Resolution Digital Elevation Model (HRDEM) is part of the CanElevation Series created in support to the National Elevation Data Strategy implemented by NRCan. Collaboration is a key factor to the success of the National Elevation Data Strategy. Refer to the “Supporting Document” section to access the list of the different partners including links to their respective data.

This portion of the data release presents a digital surface model (DSM) and digital elevation model (DEM) of the exposed Los Padres Reservoir delta where the Carmel River enters the reservoir. The DSM and DEM have a resolution of 10 centimeters per pixel and were derived from structure-from-motion (SfM) processing of aerial imagery collected with an unoccupied aerial system (UAS) on 2017-11-01. The DSM represents the elevation of the highest object within the bounds of a cell, including vegetation, woody debris and other objects. The DEM represent the elevation of the ground surface where it was visible to the acquisiton system. Due to the nature of SfM processing, the DEM may not represent a true bare-earth surface in areas of thick vegetation cover; in these areas some DEM elevations may instead represent thick vegetation canopy. The raw imagery used to create these elevation models was acquired with a UAS fitted with a Ricoh GR II digital camera featuring a global shutter. The UAS was flown on pre-programmed autonomous flight lines spaced to provide approximately 70 percent overlap between images from adjacent lines. The camera was triggered at 1 Hz using a built-in intervalometer. The UAS was flown at an approximate altitude of 100 meters above ground level (AGL), resulting in a nominal ground-sample-distance (GSD) of 2.6 centimeters per pixel. The raw imagery was geotagged using positions from the UAS onboard single-frequency autonomous GPS. Twenty temporary ground control points (GCPs) consisting of small square tarps with black-and-white cross patterns were distributed throughout the area to establish survey control. The GCP positions were measured using real-time kinematic (RTK) GPS, using corrections from a GPS base station located on a benchmark designated SFML, located approximately 1 kilometer from the study area. The DSM and DEM have been formatted as cloud optimized GeoTIFFs with internal overviews and masks to facilitate cloud-based queries and display.

A terrain surface dataset that represents the height value of all natural and built features of the surface of the city. Each pixel within the image contains an elevation value in accordance with the Australian Height Datum (AHD).

The data has been captured in May 2018 as GeoTiff files, and covers the entire municipality.

A KML tile index file can be found in the attachments to indicate the location of each tile, along with a sample image.

Capture Information:

Capture Pixel Resolution: 0.1 metres

Limitations:

Whilst every effort is made to provide the data as accurate as possible, the content may not be free from errors, omissions or defects.Preview:Download:A zip file containing all relevant files representing the Digital Surface ModelDownload Digital Surface Model data (12.0GB)

Digital Surface Model - 1m resolution. The dataset contains the 1m Digital Surface Model for the District of Columbia. Some areas have limited data. The lidar dataset redaction was conducted under the guidance of the United States Secret Service. All data returns were removed from the dataset within the United States Secret Service redaction boundary except for classified ground points and classified water points.

The LIDAR Composite DSM (Digital Surface Model) is a raster elevation model covering ~99% of England at 1m spatial resolution. The DSM (Digital Surface Model) is produced from the last or only laser pulse returned to the sensor and includes heights of objects, such as vehicles, buildings and vegetation, as well as the terrain surface

Produced by the Environment Agency in 2022, the DSM is derived from a combination of our Time Stamped archive and National LIDAR Programme surveys, which have been merged and re-sampled to give the best possible coverage. Where repeat surveys have been undertaken the newest, best resolution data is used. Where data was resampled a bilinear interpolation was used before being merged.

The 2022 LIDAR Composite contains surveys undertaken between 6th June 2000 and 2nd April 2022. Please refer to the metadata index catalogue which show for any location which survey was used in the production of the LIDAR composite.

The data is available to download as GeoTiff rasters in 5km tiles aligned to the OS National grid. The data is presented in metres, referenced to Ordinance Survey Newlyn and using the OSTN’15 transformation method. All individual LIDAR surveys going into the production of the composite had a vertical accuracy of +/-15cm RMSE.

ALOS World 3D - 30m (AW3D30) is a global digital surface model (DSM) dataset with a horizontal resolution of approximately 30 meters (1 arcsec mesh). The dataset is based on the DSM dataset (5-meter mesh version) of the World 3D Topographic Data. More details are available in the dataset documentation. This ingested dataset combines data from versions 3.1, 4.0, and 4.1. Version 4.1 (April 2024): This major update released 19,051 tiles covering global regions (excluding Antarctica and Japan). It incorporates new supplementary data for void filling and corrects partial anomalies found in versions 3.1 and 3.2, along with re-filling voids. For specific tile updates in v4.1, please use the v4.1 filter on map tiles or consult the latest format description. Version 4.0 (April 2023): This update released 1,886 tiles, improving low and mid-latitude regions and areas south of 60 degrees latitude. Key changes include: 1. New supplementary data for void filling. 2. Correction of partial anomalies and re-filling of voids (2 tiles). 3. Updated coastlines for regions south of 60 degrees latitude (44 tiles). 4. Disabled Caspian Sea water mask and supplemented with elevation data (54 tiles). 5. Extracted and corrected new partial anomaly areas in South America (1,786 tiles). 6. For detailed tile information for v4.0, please use the v4.0 filter on map tiles or refer to the format description. Version 3.2, released in January 2021, is an improved version created by reconsidering the format in the high latitude area, auxiliary data, and processing method. Different pixel spacing for each latitude zone was adopted at high latitude area. Coastline data, which is one of the auxiliary datasets, was changed, and new supplementary data was used. In addition, as a source data for Japan, AW3D version 3 was also used. Furthermore, the method of detecting anomalous values in the process was improved. Note: See the code example for the recommended way of computing slope. Unlike most DEMs in Earth Engine, this is an image collection due to multiple resolutions of source files that make it impossible to mosaic them into a single asset, so the slope computations need a reprojection. The AW3D DSM elevation is calculated by an image matching process that uses a stereo pair of optical images. Clouds, snow, and ice are automatically identified during processing and applied the mask information. However, mismatched points sometimes remain especially surrounding (or at the edges of) clouds, snow, and ice areas, which cause some height errors in the final DSM.

The Copernicus DEM is a Digital Surface Model (DSM) which represents the surface of the Earth including buildings, infrastructure and vegetation. The original GLO-30 provides worldwide coverage at 30 meters (refers to 10 arc seconds). Note that ocean areas do not have tiles, there one can assume height values equal to zero. Data is provided as Cloud Optimized GeoTIFFs. Note that the vertical unit for measurement of elevation height is meters. The Copernicus DEM for Europe at 100 meter resolution (EU-LAEA projection) in COG format has been derived from the Copernicus DEM GLO-30, mirrored on Open Data on AWS, dataset managed by Sinergise (https://registry.opendata.aws/copernicus-dem/). Processing steps: The original Copernicus GLO-30 DEM contains a relevant percentage of tiles with non-square pixels. We created a mosaic map in https://gdal.org/drivers/raster/vrt.html format and defined within the VRT file the rule to apply cubic resampling while reading the data, i.e. importing them into GRASS GIS for further processing. We chose cubic instead of bilinear resampling since the height-width ratio of non-square pixels is up to 1:5. Hence, artefacts between adjacent tiles in rugged terrain could be minimized: gdalbuildvrt -input_file_list list_geotiffs_MOOD.csv -r cubic -tr 0.000277777777777778 0.000277777777777778 Copernicus_DSM_30m_MOOD.vrt In order to reproject the data to EU-LAEA projection while reducing the spatial resolution to 100 m, bilinear resampling was performed in GRASS GIS (using r.proj) and the pixel values were scaled with 1000 (storing the pixels as Integer values) for data volume reduction. In addition, a hillshade raster map was derived from the resampled elevation map (using r.relief GRASS GIS). Eventually, we exported the elevation and hillshade raster maps in Cloud Optimized GeoTIFF (COG) format, along with SLD and QML style files.

In the scope of the International Civil Aviation Organization (ICAO) requiring countries and airports to provide electronic Terrain and Obstacle Data (eTOD), the Administration de la navigation aérienne has been tasked by the Government to take the steps necessary to comply with this requirement. This Digital Surface Model (DSM) is the result of a first LIDAR survey flight that has been done in October 2017 and is of a higher resolution than required by ICAO, thus for general purpose. For this reason this DSM also uses the national reference systems LUREF and NGL. The data itself is split up in 4 different areas, which are specified as follows: Area 1: The entire territory of Luxembourg; Area 2: Terminal Control Area (this area is larger than the territory of Luxembourg); Area 3: Aerodrome movement area; Area 4: Category II or III operations (Runway 24). The different areas come with different numerical requirements, such as data accuracy and resolution. Follow the links in the description or consult metadata for further Information.

Normalized Digital Surface Model - 1m resolution. The dataset contains the Normalized Digital Surface Model for the Washington Area. Voids exist in the data due to data redaction conducted under the guidance of the United States Secret Service. All lidar data returns and collected data were removed from the dataset based on the redaction footprint shapefile generated in 2017. This dataset provided as an ArcGIS Image service. Please note, the download feature for this image service in Open Data DC provides a compressed PNG, JPEG or TIFF. The compressed GeoTIFF raster dataset is available under additional options when viewing downloads.

Digital Surface Model - 1m resolution. The dataset contains the 1m Digital Surface Model for the District of Columbia. These lidar data are processed classified LAS 1.4 files at USGS QL1 covering the District of Columbia. Some areas have limited data. The lidar dataset redaction was conducted under the guidance of the United States Secret Service. All data returns were removed from the dataset within the United States Secret Service redaction boundary except for classified ground points and classified water points.

The LIDAR Composite First Return DSM (Digital Surface Model) is a raster elevation model covering ~99% of England at 1m spatial resolution. The first return DSM is produced from the first or only laser pulse returned to the sensor and includes heights of objects, such as vehicles, buildings and vegetation, as well as the terrain surface where the first or only return was the ground. Produced by the Environment Agency in 2022, the first return DSM is derived from data captured as part of our national LIDAR programme between 11 November 2016 and 5th May 2022. This programme divided England into ~300 blocks for survey over continuous winters from 2016 onwards. These surveys are merged together to create the first return LIDAR composite using a feathering technique along the overlaps to remove any small differences in elevation between surveys. Please refer to the metadata index catalgoues which show for any location which survey was used in the production of the LIDAR composite. The first return DSM will not match in coverage or extent of the LIDAR composite last return digital surface model (LZ_DSM) as the last return DSM composite is produced from both the national LIDAR programme and Timeseries surveys. The data is available to download as GeoTiff rasters in 5km tiles aligned to the OS National grid. The data is presented in metres, referenced to Ordinance Survey Newlyn and using the OSTN’15 transformation method. All individual LIDAR surveys going into the production of the composite had a vertical accuracy of +/-15cm RMSE. Attribution statement: © Environment Agency copyright and/or database right 2022. All rights reserved.

This portion of the data release presents digital surface models (DSM) of the Whale's Tail Marsh region of South San Francisco Bay, CA. The DSMs have resolutions of 5 centimeters per pixel and were derived from structure-from-motion (SfM) processing of repeat aerial imagery collected from fixed-wing aircraft. Unlike a digital elevation model (DEM), a DSM represents the elevation of the highest object within the bounds of a cell. Vegetation, structures, and other objects have not been removed from the data. The raw imagery used to create these elevation models was acquired from an approximate altitude of 427 meters (1,400 feet) above ground level (AGL), using a Hasselblad A6D-100c camera fitted with an HC 80 lens, resulting in a nominal ground-sample-distance (GSD) of 2.5 centimeters per pixel. The acquisition flight lines were designed to provide approximately 50 percent overlap between adjacent flight lines (sidelap), with approximately 70 percent overlap between sequential image ...

These digital surface model (DSM) data consist of surface elevations derived from source lidar measurements collected in August 2022 in the vicinity of Millbrook, NY during the SMAPVEX19-22 campaign. The location was selected due to its forested land cover, as SMAPVEX19-22 aims to validate satellite derived soil moisture estimates in forested areas. The August collection period was selected to characterize ‘leaf-on’ conditions. DSM data represents the highest elevation of features on the Earth’s surface, which may include bare-earth, vegetation, and human-made objects.

These digital surface model (DSM) data consist of surface elevations derived from source lidar measurements collected in August 2022 in the vicinity of Petersham, MA during the SMAPVEX19-22 campaign. The location was selected due to its forested land cover, as SMAPVEX19-22 aims to validate satellite derived soil moisture estimates in forested areas. The August collection period was selected to characterize ‘leaf-on’ conditions. DSM data represents the highest elevation of features on the Earth’s surface, which may include bare-earth, vegetation, and human-made objects.

This is a high resolution spatial dataset of Digital Terrain Model (DTM) data in South West England. The DTM along with a Digital Surface Model (DSM) cover an area of 9424 km2 that includes all the land west of Exmouth (i.e. west of circa 3 degrees 21 minutes West). The DTM represents the topographic model (height) of the bare earth. The dataset is a part of outcomes from the Centre for Ecology & Hydrology South West (SW) Project. There is also a Digital Surface Model (DSM) dataset covering the same areas available from the SW project.

The High Resolution Digital Elevation Model Mosaic provides a unique and continuous representation of the high resolution elevation data available across the country. The High Resolution Digital Elevation Model (HRDEM) product used is derived from airborne LiDAR data (mainly in the south) and satellite images in the north. The mosaic is available for both the Digital Terrain Model (DTM) and the Digital Surface Model (DSM) from web mapping services. It is part of the CanElevation Series created to support the National Elevation Data Strategy implemented by NRCan. This strategy aims to increase Canada's coverage of high-resolution elevation data and increase the accessibility of the products. Unlike the HRDEM product in the same series, which is distributed by acquisition project without integration between projects, the mosaic is created to provide a single, continuous representation of strategy data. The most recent datasets for a given territory are used to generate the mosaic. This mosaic is disseminated through the Data Cube Platform, implemented by NRCan using geospatial big data management technologies. These technologies enable the rapid and efficient visualization of high-resolution geospatial data and allow for the rapid generation of dynamically derived products. The mosaic is available from Web Map Services (WMS), Web Coverage Services (WCS) and SpatioTemporal Asset Catalog (STAC) collections. Accessible data includes the Digital Terrain Model (DTM), the Digital Surface Model (DSM) and derived products such as shaded relief and slope. The mosaic is referenced to the Canadian Height Reference System 2013 (CGVD2013) which is the reference standard for orthometric heights across Canada. Source data for HRDEM datasets used to create the mosaic is acquired through multiple projects with different partners. Collaboration is a key factor to the success of the National Elevation Strategy. Refer to the “Supporting Document” section to access the list of the different partners including links to their respective data.

Goddard’s LiDAR, Hyperspectral, and Thermal Imagery (G-LiHT) mission is a portable, airborne imaging system that aims to simultaneously map the composition, structure, and function of terrestrial ecosystems. G-LiHT primarily focuses on a broad diversity of forest communities and ecoregions in North America, mapping aerial swaths over the Conterminous United States (CONUS), Alaska, Puerto Rico, and Mexico.

The purpose of G-LiHT’s Digital Surface Model data product (GLDSMT) is to provide LiDAR-derived visualizations of elevation above bare earth. GLDSMT data is offered in multiple formats, including Digital Surface Model, Mean, Aspect, Rugosity, and Slope.

GLDSMT data are processed as multiple raster data products (GeoTIFFs) at a nominal 1 meter spatial resolution over locally defined areas. A low resolution browse is also provided showing the digital surface model with a color map applied in PNG format.

The LIDAR Composite DSM (Digital Surface Model) is a raster elevation model covering ~99% of England at 2m spatial resolution. The DSM (Digital Surface Model) is produced from the last or only laser pulse returned to the sensor and includes heights of objects, such as vehicles, buildings and vegetation, as well as the terrain surface Produced by the Environment Agency in 2022, the DSM is derived from a combination of our Time Stamped archive and National LIDAR Programme surveys, which have been merged and re-sampled to give the best possible coverage. Where repeat surveys have been undertaken the newest, best resolution data is used. Where data was resampled a bilinear interpolation was used before being merged. The 2022 LIDAR Composite contains surveys undertaken between 6th June 2000 and 2nd April 2022. Please refer to the metadata index catalgoues which show for any location which survey was used in the production of the LIDAR composite. The data is available to download as GeoTiff rasters in 5km tiles aligned to the OS National grid. The data is presented in metres, referenced to Ordinance Survey Newlyn and using the OSTN’15 transformation method. All individual LIDAR surveys going into the production of the composite had a vertical accuracy of +/-15cm RMSE. Attribution statement: © Environment Agency copyright and/or database right 2022. All rights reserved.